1. 查询分辨率参数
通过命令cvt可以来做这个事情,比如:我需要添加1920x1080,
cvt 1112 1000 ===>> Modeline "1112x1000_60.00" 92.00 1112 1184 1296 1480 1000 1003 1013 1038 -hsync +vsync
2. 在xorg.conf添加分辨率
1> 将上述输出的结果拷贝到xorg.conf的相应位置:
34 Section "Monitor"
35 Identifier "Monitor0"
36 VendorName "Monitor Vendor"
37 ModelName "Monitor Model"
38
39 Modeline "1112x1000_60.00" 92.00 1112 1184 1296 1480 1000 1003 1013 1038 -hsync +vsync
40 option "dpms"
41
42 EndSection
2> 在display下添加 Modes "1112x1000_60.00"
139 Section "Screen"
140 Identifier "Screen0"
141 Device "Card0"
142 Monitor "Monitor0"
168 SubSection "Display"
169 Viewport 0 0
170 Depth 24
171 Modes "1112x1000_60.00"
172 EndSubSection
173 EndSection
这样子重启就可以了。
3. 通过命令xrandr可以来查看当前X能设置的分辨率。