什么是bridge
bridge是一个虚拟网络设备,可以配置IP、MAC地址等;其次,bridge是一个虚拟交换机,和物理交换机有类似的功能。
普通的网络设备只有两端,从一端进来的数据会从另一端出去,如物理网卡从外面网络中收到的数据会转发给内核协议栈,而从协议栈过来的数据会转发到外面的物理网络中。
Bridge(桥)是 Linux 上用来做 TCP/IP 二层协议交换的设备,与物理交换机功能相似。网桥是一种在链路层实现中继,对帧进行转发的技术,根据MAC分区块,可隔离碰撞,将网络的多个网段在数据链路层连接起来的网络设备。 Bridge 设备可以和 Linux 上其他网络设备实例连接,既 attach 一个从设备,类似于在现实世界中的交换机和一个用户终端之间连接一根网线。当有数据到达时,Bridge 会根据报文中的 MAC 信息进行广播、转发、丢弃处理
bridge是用于连接两个不同网段的常见手段,不同网络段通过bridge连接后就如同在一个网段一样,工作原理很简单就是L2数据链路层进行数据包的转发。
原理
bridge和route比较相似,都可以用来分发网络数据包,它们的本质不同在于:route在L3网络层,使用路由协议、bridge在L2数据链路层,通过学习和缓存在链路上传输的数据包中的源地址以及物理层的输入端口:
- 收到新数据包时,记录源MAC地址和端口
- 根据目的MAC查找本地缓存,如果能找到对应的MAC地址记录
- 若发现记录不在本地网络,直接丢弃数据包
- 若发现记录存在对应的端口,则将数据包直接从该端口转发出去
- 如果本地缓存中不存在任何记录,则在本网段中进行广播。
1、结构体
(1)、NetConf结构体
- name (string, required): the name of the network.
- type (string, required): "bridge".
- bridge (string, optional): name of the bridge to use/create. Defaults to "cni0".
- isGateway (boolean, optional): assign an IP address to the bridge. Defaults to false.
- isDefaultGateway (boolean, optional): Sets isGateway to true and makes the assigned IP the default route. Defaults to false.
- forceAddress (boolean, optional): Indicates if a new IP address should be set if the previous value has been changed. Defaults to false.
- ipMasq (boolean, optional): set up IP Masquerade on the host for traffic originating from this network and destined outside of it. Defaults to false.
- mtu (integer, optional): explicitly set MTU to the specified value. Defaults to the value chosen by the kernel.
- hairpinMode (boolean, optional): set hairpin mode for interfaces on the bridge. Defaults to false.
- ipam (dictionary, required): IPAM configuration to be used for this network.
- promiscMode (boolean, optional): set promiscuous mode on the bridge. Defaults to false.
type NetConf struct {
types.NetConf
BrName string `json:"bridge"`
IsGW bool `json:"isGateway"`
IsDefaultGW bool `json:"isDefaultGateway"`
ForceAddress bool `json:"forceAddress"`
IPMasq bool `json:"ipMasq"`
MTU int `json:"mtu"`
HairpinMode bool `json:"hairpinMode"`
PromiscMode bool `json:"promiscMode"`
}
使用如下所时:
{
"name": "mynet",
"type": "bridge",
"bridge": "mynet0",
"isDefaultGateway": true,
"forceAddress": false,
"ipMasq": true,
"hairpinMode": true,
"ipam": {
"type": "host-local",
"subnet": "10.10.0.0/16"
}
}
2、main函数
main 函数主要是实现了两个主要方法cmdAdd,cmdDel,主要分析cmdAdd实现
func main() {
// TODO: implement plugin version
skel.PluginMain(cmdAdd, cmdGet, cmdDel, version.All, "TODO")
}
3、cmdAdd函数
cmdAdd函数实现的内容表多,可以分开解析
(3.1)、loadNetConf函数
loadNetConf主要是得到NetConf结构体配置信息
func loadNetConf(bytes []byte) (*NetConf, string, error) {
n := &NetConf{
BrName: defaultBrName,
}
if err := json.Unmarshal(bytes, n); err != nil {
return nil, "", fmt.Errorf("failed to load netconf: %v", err)
}
return n, n.CNIVersion, nil
}
(3.2)、setupBridge函数
- setupBridge里面调用ensureBridge,前面吧啦吧啦设置了一大队系统调用参数,
- 通过netlink.LinkAdd(br)创建网桥,相当于ip link add br-test type bridge
- 然后通过 netlink.LinkSetUp(br)启动网桥,相当于ip link set dev br-test up
func setupBridge(n *NetConf) (*netlink.Bridge, *current.Interface, error) {
// create bridge if necessary
br, err := ensureBridge(n.BrName, n.MTU, n.PromiscMode)
if err != nil {
return nil, nil, fmt.Errorf("failed to create bridge %q: %v", n.BrName, err)
}
return br, ¤t.Interface{
Name: br.Attrs().Name,
Mac: br.Attrs().HardwareAddr.String(),
}, nil
}
(3.3)、setupVeth函数
- 调用netlink.LinkAdd(veth)创建veth,这个是一个管道,Linux的网卡对,在容器对应的namespace下创建好虚拟网络接口,相当于ip link add test-veth0 type veth peer name test-veth1
- 调用netlink.LinkSetUp(contVeth)启动容器端网卡,相当于ip link set dev test-veth0 up
- 调用netlink.LinkSetNsFd(hostVeth, int(hostNS.Fd()))将host端加入namespace中,相当于ip link set $link netns $ns
- 调用netlink.LinkSetMaster(hostVeth, br)绑到bridge,相当于ip link set dev test-veth0 master br-test
func setupVeth(netns ns.NetNS, br *netlink.Bridge, ifName string, mtu int, hairpinMode bool) (*current.Interface, *current.Interface, error) {
contIface := ¤t.Interface{}
hostIface := ¤t.Interface{}
err := netns.Do(func(hostNS ns.NetNS) error {
// create the veth pair in the container and move host end into host netns
hostVeth, containerVeth, err := ip.SetupVeth(ifName, mtu, hostNS)
if err != nil {
return err
}
contIface.Name = containerVeth.Name
contIface.Mac = containerVeth.HardwareAddr.String()
contIface.Sandbox = netns.Path()
hostIface.Name = hostVeth.Name
return nil
})
if err != nil {
return nil, nil, err
}
// need to lookup hostVeth again as its index has changed during ns move
hostVeth, err := netlink.LinkByName(hostIface.Name)
if err != nil {
return nil, nil, fmt.Errorf("failed to lookup %q: %v", hostIface.Name, err)
}
hostIface.Mac = hostVeth.Attrs().HardwareAddr.String()
// connect host veth end to the bridge
if err := netlink.LinkSetMaster(hostVeth, br); err != nil {
return nil, nil, fmt.Errorf("failed to connect %q to bridge %v: %v", hostVeth.Attrs().Name, br.Attrs().Name, err)
}
// set hairpin mode
if err = netlink.LinkSetHairpin(hostVeth, hairpinMode); err != nil {
return nil, nil, fmt.Errorf("failed to setup hairpin mode for %v: %v", hostVeth.Attrs().Name, err)
}
return hostIface, contIface, nil
}
(3.4)、ipam.ExecAdd函数
- 调用ipam.ExecAdd获取IP地址
func ExecAdd(plugin string, netconf []byte) (types.Result, error) {
return invoke.DelegateAdd(plugin, netconf, nil)
}
(3.5)、calcGateways函数
- 调用calcGateways根据IP地址计算对应的路由和网关
// Gather gateway information for each IP family
gwsV4, gwsV6, err := calcGateways(result, n)
if err != nil {
return err
}
(3.6)、函数
- 调用ipam.ConfigureIface将IP地址设置到对应的虚拟网络接口上,相当于ifconfig test-veth0 192.168.209.135/24 up
- 调用enableIPForward(gws.family)开启ip转发,路径/proc/sys/net/ipv4/ip_forward写入值1
// Configure the container hardware address and IP address(es)
if err := netns.Do(func(_ ns.NetNS) error {
contVeth, err := net.InterfaceByName(args.IfName)
if err != nil {
return err
}
// Disable IPv6 DAD just in case hairpin mode is enabled on the
// bridge. Hairpin mode causes echos of neighbor solicitation
// packets, which causes DAD failures.
for _, ipc := range result.IPs {
if ipc.Version == "6" && (n.HairpinMode || n.PromiscMode) {
if err := disableIPV6DAD(args.IfName); err != nil {
return err
}
break
}
}
// Add the IP to the interface
if err := ipam.ConfigureIface(args.IfName, result); err != nil {
return err
}
// Send a gratuitous arp
for _, ipc := range result.IPs {
if ipc.Version == "4" {
_ = arping.GratuitousArpOverIface(ipc.Address.IP, *contVeth)
}
}
return nil
}); err != nil {
return err
}
4、ip.SetupIPMasq函数
- 调用ip.SetupIPMasq建立iptables规则
if n.IPMasq {
chain := utils.FormatChainName(n.Name, args.ContainerID)
comment := utils.FormatComment(n.Name, args.ContainerID)
for _, ipc := range result.IPs {
if err = ip.SetupIPMasq(ip.Network(&ipc.Address), chain, comment); err != nil {
return err
}
}
}
- -A POSTROUTING -s 172.30.3.0/24 -m comment --comment "name: \"cbr0\" id: \"7567cf04805c47d94a3d9ad1db32f7cb424fd058c497b5f450278c1ee9c07e5b\"" -j CNI-15aa38615ee8a1e7bfb519c7
- -A CNI-15aa38615ee8a1e7bfb519c7 -d 172.30.3.0/24 -m comment --comment "name: \"cbr0\" id: \"7567cf04805c47d94a3d9ad1db32f7cb424fd058c497b5f450278c1ee9c07e5b\"" -j ACCEPT
- -A CNI-15aa38615ee8a1e7bfb519c7 ! -d 224.0.0.0/4 -m comment --comment "name: \"cbr0\" id: \"7567cf04805c47d94a3d9ad1db32f7cb424fd058c497b5f450278c1ee9c07e5b\"" -j MASQUERADE
4.1 FormatChainName函數
格式維 CNI-15aa38615ee8a1e7bfb519c7,容器id
// Generates a chain name to be used with iptables.
// Ensures that the generated chain name is exactly
// maxChainLength chars in length
func FormatChainName(name string, id string) string {
chainBytes := sha512.Sum512([]byte(name + id))
chain := fmt.Sprintf("%s%x", chainPrefix, chainBytes)
return chain[:maxChainLength]
}
4.2 SetupIPMasq函数
终于找到罪魁祸首了,这里设置了iptables,如上iptables规则,刨出组播地址224.0.0.0/4
添加了如上三条规则
// SetupIPMasq installs iptables rules to masquerade traffic
// coming from ipn and going outside of it
func SetupIPMasq(ipn *net.IPNet, chain string, comment string) error {
isV6 := ipn.IP.To4() == nil
var ipt *iptables.IPTables
var err error
var multicastNet string
if isV6 {
ipt, err = iptables.NewWithProtocol(iptables.ProtocolIPv6)
multicastNet = "ff00::/8"
} else {
ipt, err = iptables.NewWithProtocol(iptables.ProtocolIPv4)
multicastNet = "224.0.0.0/4"
}
if err != nil {
return fmt.Errorf("failed to locate iptables: %v", err)
}
// Create chain if doesn't exist
exists := false
chains, err := ipt.ListChains("nat")
if err != nil {
return fmt.Errorf("failed to list chains: %v", err)
}
for _, ch := range chains {
if ch == chain {
exists = true
break
}
}
if !exists {
if err = ipt.NewChain("nat", chain); err != nil {
return err
}
}
// Packets to this network should not be touched
if err := ipt.AppendUnique("nat", chain, "-d", ipn.String(), "-j", "ACCEPT", "-m", "comment", "--comment", comment); err != nil {
return err
}
// Don't masquerade multicast - pods should be able to talk to other pods
// on the local network via multicast.
if err := ipt.AppendUnique("nat", chain, "!", "-d", multicastNet, "-j", "MASQUERADE", "-m", "comment", "--comment", comment); err != nil {
return err
}
return ipt.AppendUnique("nat", "POSTROUTING", "-s", ipn.String(), "-j", chain, "-m", "comment", "--comment", comment)
}