SPL被拒后重新提交要求

6.16. Handling of Rejected Papers. (approved 11 November 2009)

Authors of rejected manuscripts are allowed to resubmit their manuscripts afresh only once. At the time of submission, authors will be asked whether they consider their manuscript to be a new submission or a resubmission of an earlier rejected manuscript. If the authors indicate that their manuscript is a new submission, then the review process will follow the regular procedure.

If authors indicate instead that their manuscript is a resubmission, then they are required to upload a supporting document detailing how the new submission has addressed the concerns raised during the previous review. Authors may also request that the resubmission be handled by the same Associate Editor, if the Associate Editor has not retired from the board. The Editor-in-Chief will do his/her best effort to accommodate the author’s request while taking into consideration the balancing of the workload among the Associate Editors of the editorial board of the journal. A new Associate Editor may also be assigned to the manuscript by the Editor-in-Chief.

Even when the manuscript is flagged by the authors to be a resubmission of an earlier rejected paper, the manuscript will be treated as a new submission with a new submission date; it is not treated as an RQ version.

The assigned Associate Editor can use the previous reviewers or a new set of reviewers, or a mix of old and new reviewers. It is preferable that the Associate Editors use some of the previous reviewers to help ascertain that the revision has addressed the concerns of the earlier review cycle. The selection of the reviewers is left to the discretion of the Associate Editor.

If the authors indicated during the submission process that their manuscript is a new submission and it is found during the review process that the manuscript is very similar to an earlier rejected paper, then the manuscript may be immediately rejected. Authors can still resubmit their manuscript and indicate correctly that it is a resubmission of an earlier rejected manuscript, including uploading of the required supporting document detailing how the new submission has addressed the concerns raised during the previous review.

6.16。退稿处理。(2009年11月11日通过)


被退稿的作者只能重新提交一次稿件。在提交的时候,作者会被询问他们是否认为他们的手稿是一个新的提交或重新提交一个较早的被拒绝的手稿。如果作者表明他们的稿件是新提交的,那么审查过程将按照常规程序进行。


如果作者表明他们的原稿是重新提交的,那么他们就需要上传一份支持文件,详细说明新提交的论文是如何解决之前审查中提出的问题的。如果副编辑没有从委员会退休,作者也可以要求由同一副编辑处理重新提交。主编将尽力满足作者的要求,同时兼顾期刊编委会副主编之间的工作量平衡。主编也可以指派一名新的副主编来处理原稿。


即使手稿被作者标记为先前被拒绝的论文的重新提交,该手稿将被视为新的提交,并有新的提交日期;它不被视为RQ版本。


指定的副编辑器可以使用以前的审阅者或一组新的审阅者,或者新旧审阅者的混合。副主编最好利用一些以前的审查员来帮助确定修订工作已经解决了较早的审查周期所关注的问题。审稿人的选择由副主编自行决定。


如果作者在提交过程中表明他们的稿件是新的,并且在评审过程中发现该稿件与之前被拒绝的论文非常相似,那么该稿件可能会被立即拒绝。作者仍然可以重新提交他们的原稿,并正确地表明这是对之前被拒绝的原稿的重新提交,包括上传所需的支持文件,详细说明新提交的原稿是如何解决之前评审中提出的问题的。

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
### 回答1: 要重新打印一个SPL文件,可以按照以下步骤进行操作: 首先,确保您的计算机连接到一台打印机,并且该打印机支持SPL文件格式。如果您不确定您的打印机是否支持该格式,可以查阅打印机的用户手册或者咨询打印机制造商。 然后,打开包含SPL文件文件夹。您可以通过点击鼠标右键并选择"打开文件夹"或使用文件资源管理器来访问文件夹。 接下来,找到您希望重新打印的SPL文件。单击该文件以选中它,然后按下右键。 在弹出的菜单中,选择"打印"选项。这将打开打印对话框。 在打印对话框中,选择您想要使用的打印机。如果您的计算机连接了多台打印机,确保选择正确的打印机。 然后,您可以选择打印设置,例如纸张尺寸、方向、质量等。根据您的需要进行调整。 最后,点击"打印"按钮开始打印。您的计算机会向打印机发送SPL文件,并开始打印。 请注意,以上步骤可能会根据您的操作系统和打印机型号而有所不同。因此,如果您遇到任何困难,建议您参考打印机和操作系统的用户手册,或者联系打印机制造商获取具体的指导。 ### 回答2: 如果要重新打印SPL文件,我提供以下步骤: 1. 首先,确保您的计算机连接着打印机,并且打印机处于开启状态。 2. 打开您的SPL文件所在的文件夹。 3. 找到要重新打印的SPL文件,并右键单击该文件。在弹出的菜单中选择“打印”选项。 4. 弹出的打印设置窗口中,选择正确的打印机,确保打印机设置和纸张尺寸等与您的需求一致。您还可以选择打印份数和其他打印选项。 5. 点击“打印”按钮,开始打印SPL文件。 6. 等待打印机完成打印过程。根据文件大小和打印机速度的差异,等待时间可能会有所不同。 7. 一旦打印完成,您可以检查打印结果。如果需要重新打印,您可以重复上述步骤。 请注意,SPL文件是一种用于打印的文件格式,通常由打印机驱动程序生成。在某些情况下,如果您的SPL文件无法正常打印,您可以尝试重新生成SPL文件,然后按照上述步骤重新打印。如果问题仍然存在,可能需要检查您的打印机设置或联系技术支持。 ### 回答3: 要重新打印一个.spl文件,你可以按照以下步骤操作: 1. 找到原始的.spl文件。通常,这个文件会存储在计算机特定的文件夹中,具体位置会取决于你打印时选择的设置和驱动程序。 2. 打开打印机的打印队列。在计算机的任务栏中,你可以找到一个打印机的图标。右键点击这个图标,然后选择“打开打印队列”。 3. 在打印队列中,你会看到所有尚未完成打印的文档列表。在列表中找到你要重新打印的.spl文件。 4. 右键点击要重新打印的.spl文件,并选择“重新打印”。这将重新文件发送到打印机进行打印。 5. 确保打印机已连接并准备就绪。如果打印机没有连接到计算机或没有墨水/碳粉/纸张,重新打印可能会失败。 请注意,这个过程可能会因打印机型号或使用的操作系统而有所不同。如果你遇到困难,可以参考你的打印机或操作系统的用户手册,或者咨询相关技术支持

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

计算机视觉-Archer

图像分割没有团队的同学可加群

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值