年产10000吨聚碳酸酯板材车间初步工艺设计

最新推荐文章于 2025-05-02 18:03:28 发布

柠檬工作室

最新推荐文章于 2025-05-02 18:03:28 发布

阅读量1.6k

点赞数 13

文章标签：自动化

本文链接：https://blog.csdn.net/zou13075338606/article/details/136666451

版权

摘要

本阶段设计主要是进行年产约10000吨聚碳酸酯板材的生产和车间的初步生产工艺的设计，本文首先概述分析了本文主要概述介绍了目前PC板材生产线的设计特点优势及工艺发展及现状并首先从设计PC板材初步生产设计工艺要点入手，通过对配方参数选择，设备选型，工业参数的控制分析等主要过程对设计整个的工艺过程都做了一个较为清晰详细的阐述。另外，为了正确指出聚碳酸酯板材比较成熟可靠的技术生产的工艺路线，计算好其投入生产车间生产所需使用的主要各种辅助生产的设备配置和工程总需投资建设成本，绘制出设计工艺流程图和实际生产车间闻设备平面的布置方案图，对工程实际进行投资和建设PC板材产料车间运行的其它各个细节方面亦具有了积极有力的管理指导保障作用。

关键词:聚碳酸酯，PC板材，生产车间，工艺设计

Abstract

The design of this stage is mainly for annual output of about 10000 tons of polycarbonate plate production and workshop preliminary production process design, this paper first summarizes the analysis of this paper mainly introduces the design characteristics and advantages of PC plate production line and process development and current situation and first from the design of PC plate preliminary production design process points, through the selection of formula parameters, Equipment selection, industrial parameter control and analysis of the main process of the design of the whole process has made a more clear and detailed description. In addition, in order to correctly point out the mature and reliable technical production process route of polycarbonate sheet, calculate the main auxiliary production equipment configuration and the total cost of engineering investment, draw the design process flow chart and the layout plan of the actual production workshop. The actual investment in the project and the construction of pc board material production workshop operation of other details also has a positive and powerful management guidance guarantee function.

Keywords:polycarbonate,polycarbonate board,production workshop,process design