实验要求及拓补
配置:
IP地址
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.254 24
[R1-GigabitEthernet0/0/0]int s4/0/0
[R1-Serial4/0/0]ip add 15.1.1.1 24
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.2.254 24
[R2-GigabitEthernet0/0/0]int s4/0/0
[R2-Serial4/0/0]ip add 25.1.1.2 24
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.3.254 24
[R3-GigabitEthernet0/0/0]int s4/0/0
[R3-Serial4/0/0]ip add 35.1.1.3 24
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 45.1.1.4 24
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.4.254 24
[R5-Serial3/0/1]int s4/0/0
[R5-Serial4/0/0]ip add 35.1.1.5 24
[R5-Serial4/0/0]
[R5-Serial4/0/0]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 45.1.1.5 24
[R5-GigabitEthernet0/0/0]int l0
[R5-LoopBack0]ip add 5.5.5.5 24
R1 R2与R5之间的pap和chap认证
[R5]aaa
[R5-aaa]local-user wangdaye password cipher wdy12345
[R5-aaa]local-user wangdaye service-type ppp
[R5]int s4/0/1
[R5-Serial4/0/1]ppp authentication-mode pap
[R5]int s3/0/1
[R5-Serial3/0/1]ppp authentication-mode chap
[R1]int s4/0/0
[R1-Serial4/0/0]ppp pap local-user wangdaye password cipher wdy12345
[R2-Serial4/0/0]ppp chap user wangdaye
[R2-Serial4/0/0]ppp chap password cipher wdy12345
R3与R5之间的hdlc封装
[R3]int s4/0/0
[R3-Serial4/0/0]link-protocol hdlc
[R5-Serial3/0/1]int s4/0/0
[R5-Serial4/0/0]link-protocol hdlc
R1,R2,R3之间构建MGRE
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.1.1.1
[R1-Tunnel0/0/0]nhrp network-id 100
[R1]int t0/0/1
[R1-Tunnel0/0/1]ip add 10.1.2.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4
[R2]int t0/0/0
[R2-Tunnel0/0/0]ip add 10.1.1.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source Serial 4/0/0
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register
[R3]int t 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source Serial 4/0/0
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register
私网rip全网可达
[R1]rip 1
[R1-rip-1]v 2
[R1-rip-1]undo summary
[R1-rip-1]net 192.168.1.0
[R1-rip-1]net 10.0.0.0
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]undo rip split-horizon
[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo summary
[R2-rip-1]net 192.168.2.0
[R2-rip-1]net 10.0.0.0
[R2-rip-1]int t0/0/0
[R2-Tunnel0/0/0]undo rip split-horizon
[R3]rip 1
[R3-rip-1]v 2
[R3-rip-1]undo summary
[R3-rip-1]ne 192.168.3.0
[R3-rip-1]ne 10.0.0.0
[R3-rip-1]int t0/0/0
[R3-Tunnel0/0/0]undo rip split-horizon
[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo summary
[R4-rip-1]ne 192.168.4.0
[R4-rip-1]ne 10.0.0.0
所有PC可访问R5环回
[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000
[R2]acl 2000
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]q
[R2]int s4/0/0
[R2-Serial4/0/0]nat outbound 2000
[R3]acl 2000
[R3-acl-basic-2000]rule permit source 192.168.3.3 0.0.0.255
[R3]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000
[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]nat outbound 2000
测试