GPGPU::Basic Math Tutorial
Contents
- Introduction
- Setting up OpenGL
- GPGPU concept 1: Arrays = textures
- GPGPU concept 2: Kernels = shaders
- GPGPU concept 3: Computing = drawing
- GPGPU concept 4: Feedback
- Putting it all together
- Appendices
- Acknowledgements
- Disclaimer and Copyright
Source code
Single file source for three different versions of the tutorial code are available:
Additionally, a linux Makefile and a Visual Studio 2003 solution file are provided.
Citation
In case you want to cite this tutorial, please use this BibTex citation.
Back to top
The goal of this tutorial is to explain the background and all necessary steps that are required to implement a simple linear algebra operator on the GPU: saxpy() as known from the BLAS library. For two vectors x and y of length N and a scalar value alpha, we want to compute a scaled vector-vector addition: y = y + alpha * x. The saxpy() operation requires almost no background in linear algebra, and serves well to illustrate all entry-level GPGPU concepts. The techniques and implementation details introduced in this tutorial can easily be extended to more complex calculations on GPUs.
This tutorial is not intended to explain every single detail from scratch. It is written for programmers with a basic understanding of OpenGL, its state machine concept and the way OpenGL models the graphics pipeline. It is recommended to go through the examples and excercises of the OpenGL Programming Guide (Red Book). PDF and HTML versions and sample programs are freely available on the internet. Additionally, chapter 1 of the Orange Book ("OpenGL Shading Language"), titled "A Review of OpenGL Basics", provides an excellent summary. NeHe's OpenGL tutorials are also recommended.
This tutorial is based on OpenGL, simply because the target platform should not be limited to MS Windows. Most concepts explained here however translate directly to DirectX.
For a good overview and pointers to reading material, please refer to the FAQ at the community site GPGPU.org. The sections 'Where can I learn about OpenGL and Direct3D?', 'How does the GPU pipeline work?' and 'In what ways is GPU programming similar to CPU programming?' are highly recommended.
You will need at least a NVIDIA GeForce FX or an ATI RADEON 9500 graphics card. Older GPUs do not provide the features (most importantly, single precision floating point data storage and computation) which we require.
First of all, a C/C++ compiler is required. Visual Studio .NET 2003 and 2005, Eclipse 3.x plus CDT/MinGW, the Intel C++ Compiler 9.x and GCC 3.4+ have been successfully tested. Up-to-date drivers for the graphics card are essential. At the time of writing, using an ATI card only works with Windows, whereas NVIDIA drivers support both Windows and Linux (and in theory, also Solaris x86 and FreeBSD, though I never tested this myself).
The accompanying code uses two external libraries, GLUT and GLEW. For Windows systems, GLUT is available here, on Linux, the packages freeglut and freeglut-devel ship with most distributions. GLEW can be downloaded from SourceForge. Header files and binaries must be installed in a location where the compiler can locate them, alternatively, the locations need to be added to the compiler's include and library paths. Shader support for GLSL is built into the driver, to use Cg, the Cg Toolkit is required.
For a similar example program done in DirectX, refer to Jens Krügers Implicit Water Surface demo (there is also a version based on OpenGL available). This is however well-commented example code and not a tutorial.
GPU metaprogramming languages abstract from the graphical context completely. Both BrookGPU and Sh are recommended. Note that Sh is continued as RapidMind these days.
Back to top
GLUT, the OpenGL Utility Toolkit, provides functions to handle window events, create simple menus etc. Here, we just use it to set up a valid OpenGL context (allowing us access to the graphics hardware through the GL API later on) with as few code lines as possible. Additionally, this approach is completely independent of the window system that is actually running on the computer (MS-Windows or Xfree/Xorg on Linux / Unix and Mac).
// include the GLUT header file
#include <GL/glut.h>
// call this and pass the command line arguments from main()
void initGLUT(int argc, char **argv) {
glutInit ( &argc, argv );
glutCreateWindow("SAXPY TESTS");
}
Most of the features that are required to perform general floating-point computations on the GPU are not part of core OpenGL. OpenGL Extensions however provide a mechanism to access features of the hardware through extensions to the OpenGL API. They are typically not supported by every type of hardware and by every driver release because they are designed to expose new features of the hardware (such as those we need) to application programmers. In a real application, carefully checking if the necessary extensions are supported and implementing a fallback to software otherwise is required. In this tutorial, we skip this to prevent code obfuscation.
A list of (almost all) OpenGL extensions is available at the OpenGL Extension Registry.
The extensions actually required for this implementation will be presented when we need the functionality they provide in our code. The small tool glewinfo that ships with GLEW, or any other OpenGL extension viewer, or even OpenGL itself (an example can be found when following the link above) can be used to check if the hardware and driver support a given extension.
Obtaining pointers to the functions the extensions define is an advanced issue, so in this example, we use GLEW as an extension loading library that wraps everything we need up nicely with a minimalistic interface:
void initGLEW (void) {
// init GLEW, obtain function pointers
int err = glewInit();
// Warning: This does not check if all extensions used
// in a given implementation are actually supported.
// Function entry points created by glewInit() will be
// NULL in that case!
if (GLEW_OK != err) {
printf((char*)glewGetErrorString(err));
exit(ERROR_GLEW);
}
}
Preparing OpenGL for offscreen rendering
In the GPU pipeline, the traditional end point of every rendering operation is the frame buffer, a special chunk of graphics memory from which the image that appears on the display is read. Depending on the display settings, the most we can get is 32 bits of color depth, shared among the red, green, blue and alpha channels of your display: Eight bits to represent the amount of "red" in a image (same for green etc.: RGBA) is all we can expect and in fact need on the display. This already sums up to more than 16 million different colors. Since we want to work with floating point values, 8 bits is clearly insufficient with respect to precision. Another problem is that the data will always be clamped to the range of [0/255; 255/255] once it reaches the framebuffer.
How can we work around this? We could invent a cumbersome arithmetics that maps the sign-mantissa-exponent data format of an IEEE 32-bit floating point value into the four 8-bit channels. But luckily, we don't have to! First, 32-bit floating poit values on GPUs are provided through a set of OpenGL extensions (see section 2). Second, an OpenGL extension called EXT_framebuffer_object allows us to use an offscreen buffer as the target for rendering operations such as our vector calculations, providing full precision and removing all the unwanted clamping issues. The commonly used abbreviation is FBO, short for framebuffer object.
To use this extension and to turn off the traditional framebuffer and use an offscreen buffer (surface) for our calculations, a few lines of code suffice. Note that binding FBO number 0 will restore the window-system specific framebuffer at any time. This is useful for advanced applications but beyond the scope of this tutorial.
GLuint fb;
void initFBO(void) {
// create FBO (off-screen framebuffer)
glGenFramebuffersEXT(1, &fb);
// bind offscreen buffer
glBindFramebufferEXT(GL_FRAMEBUFFER_EXT, fb);
}
Back to top
GPGPU concept 1: Arrays = textures
One-dimensional arrays are the native CPU data layout. Higher-dimensional arrays are typically accessed (at least once the compiler is done with it) by offsetting coordinates in a large 1D array. An example for this is the row-wise mapping of a two-dimensional array a[i][j] of dimensions M and N into the one-dimensional array a[i*M+j], assuming array indices start with zero (as in C, C++ and Java but not in Fortran).
For GPUs, the native data layout is a two-dimensional array. One- and three-dimensional arrays are also supported, but they either impose a performance penalty or cannot be used directly with the techniques we employ in this tutorial. Arrays in GPU memory are called textures or texture samplers. Texture dimensions are limited on GPUs, the maximum value in each dimension can be queried with a bit of code like this once a valid OpenGL context is available (that is, once GLUT is initialized):
int maxtexsize;
glGetIntegerv(GL_MAX_TEXTURE_SIZE,&maxtexsize);
printf("GL_MAX_TEXTURE_SIZE, %d/n",maxtexsize);
On today's cards, the resulting value is 2048 or 4096 per dimension. Be warned though that although a given card seems to support three-dimensional floating point textures of size 4096*4096*4096, the available graphics memory is still a hard limit!
On the CPU, we usually talk about array indices, on the GPU, we will need texture coordinates to access values stored in the textures. Texture coordinates need to address texel centers.
Traditionally, GPUs work on four-tupels of data simultaneously: There are four color channels called red, green, blue and alpha (RGBA). We will explain later on how we can exploit this to speed up our implementation on certain hardware.
Let us recall the calculation we want to perform: y = y + alpha * x for a given vector length N. We need two arrays containing floating point values and a single float value to do this:
float* dataY = (float*)malloc(N*sizeof(float));
float* dataX = (float*)malloc(N*sizeof(float));
float alpha;
Although the actual computation will be performed on the GPU, we still need to allocate these arrays on the CPU and fill them with initial values.
Creating floating point textures on the GPU
This topic requires quite a lot of explanation, so let us first recall that on the CPU, we simply need two arrays with floating point values. On the GPU, we use floating point textures to store the data.
The first important complication is that we have a variety of different so-called texture targets available. Even if we skip the non-native targets and only restrict ourselves to two-dimensional textures, we are left with two choices. GL_TEXTURE_2D is the traditional OpenGL two-dimensional texture target, referred to as texture2D throughout this tutorial. ARB_texture_rectangle is an OpenGL extension that provides so-called texture rectangles, sometimes easier to use for programmers without a graphics background. There are two conceptual differences between texture2Ds and texture rectangles, which we list here for reference. We will work through some examples later on.
|
| texture2D | texture rectangle |
| texture target | GL_TEXTURE_2D | GL_TEXTURE_RECTANGLE_ARB |
| texture coordinates | Coordinates have to be normalized to the range [0,1] by [0,1], independent of the dimension [0,M] by [0,N] of the texture. | Coordinates are not normalized. |
| texture dimensions | Dimensions are constrained to powers of two (e.g. 1024 by 512) unless the driver supports the extension ARB_non_power_of_two or unless the driver exposes OpenGL 2.0 which alleviates this restriction. | Dimensions can be arbitrary by definition, e.g. 513 by 1025. |
The next important decision affects the texture format. GPUs allow for the simultaneous processing of scalars, tupels, tripels or four-tupels of data. In this tutorial, we focus on scalars and four-tupels exemplarily. The easier case is to allocate a texture that stores a single floating point value per texel. In OpenGL, GL_LUMINANCE is the texture format to be used for this. To use all four channels, the texture format is GL_RGBA. This means that we store four floating point values per texel, one in the red color channel, one in the green channel and so on. For single precision floating point values, a LUMINANCE texture will consume 32 bits (4 bytes) of memory per texel, and a RGBA texture requires 4*32=128 bits (16 bytes) per texel.
Now it gets really tricky: There are three extensions to OpenGL that expose true single precision floating point values as internal format for textures, NV_float_buffer, ATI_texture_float and ARB_texture_float. Each extension defines a set of enumerants (for example, GL_FLOAT_R32_NV) and symbols (for example, 0x8880) that can be used to define and allocate textures, as described later on.
The enumerants for the two texture formats we are interested in here are GL_FLOAT_R32_NV and GL_FLOAT_RGBA32_NV. The first enumerant tells the GL that we want to store a single floating point value per texel, the latter stores a 4-tupel of floating point values in each texel. The two extensions ATI_texture_float and ARB_texture_float are identical from our point of view except that they define different enumerants for the same symbols. It is a matter of preference which one to use, because they are supported on both GeForce 6 (and better) and ATI hardware. The enumerants are GL_LUMINANCE_FLOAT32_ATI, GL_RGBA_FLOAT32_ATI and GL_LUMINANCE 32F _ARB, GL_RGBA 32F _ARB respectively.
The last problem we have to tackle is the question how to map a vector on the CPU into a texture on the GPU. We choose the easiest mapping that comes to mind: A vector of length N is mapped into a texture of size sqrt(N) by sqrt(N) for LUMINANCE formats (this means we assume N is a power of two), and into a texture of size sqrt(N/4) by sqrt(N/4) for RGBA formats, again assuming N is chosen so that the mapping "fits". For instance, N=1024^2 yields a texture of size 512 by 512. We store the corresponding value in the variable texSize.
The following table summmarizes all the things we just discussed, sorted by the available GPU types: NVIDIA GeForce FX (NV3x), GeForce 6, 7 and 8 (NV4x, G7x, G8x) and ATI.
|
| NV3x | NV4x, G7x, G8x (RECT) | NV4x, G7x, G8x (2D) | ATI |
| target | texture rectangle | texture rectangle | texture2D | texture2D and texture rectangle |
| format | LUMINANCE and RGBA (and RG and RGB)* | |||
| internal | NV_float_buffer | NV_float_buffer | ATI_texture_float | ATI_texture_float |
(*) Warning: these formats are supported as textures, but not all of them as render targets (see below).
After this large theory section, it is time to go back to some code. Luckily, allocating a texture is very easy once we know which texture target, texture format and internal format we want to use:
// create a new texture name
GLuint texID;
glGenTextures (1, &texID);
// bind the texture name to a texture target
glBindTexture(texture_target,texID);
// turn off filtering and set proper wrap mode
// (obligatory for float textures atm)
glTexParameteri(texture_target, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
glTexParameteri(texture_target, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
glTexParameteri(texture_target, GL_TEXTURE_WRAP_S, GL_CLAMP);
glTexParameteri(texture_target, GL_TEXTURE_WRAP_T, GL_CLAMP);
// set texenv to replace instead of the default modulate
glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE);
// and allocate graphics memory
glTexImage2D(texture_target, 0, internal_format,
texSize, texSize, 0, texture_format, GL_FLOAT, 0);
Let us digest this last OpenGL call one parameter at a time: We already know what texture_target should be. The next parameter (set to 0) tells the GL not to use any mipmap levels for this texture. The internal format is clear, and so should be the texSize parameter. The next parameter (again set to 0) turns off borders for our texture because we don't need them. The texture format chooses the number of channels, as explained above. The parameter GL_FLOAT should not be misinterpreted: It has nothing to do with the precision of the values we want to store in the texture, it is only relevant on the CPU side because it tells the GL that the actual data which gets passed in later calls is floating point. The last parameter (set to 0) simply tells the GL that we do not want to specify any data for the texture right now. This call therefore results in a properly allocated texture corresponding to the settings we decided upon before. It might be a good analogy to think of this piece of code as the equivalent of an allocation by malloc() (or similar) as described above.
One last remark: Choosing a proper data layout, that is, a mapping between texture formats, texture sizes and your CPU data, is a very problem-depending question. Experience shows that for some cases, defining such a mapping is obvious and in other cases, this takes up most of your time. Suboptimal mappings can seriously impact performance!
One-to-one mapping from array index to texture coordinates
Later on in this tutorial, we update our data stored in textures by a rendering operation. To be able to control exactly which data elements we compute or access from texture memory, we will need to choose a special projection that maps from the 3D world (world or model coordinate space) to the 2D screen (screen or display coordinate space), and additionally a 1:1 mapping between pixels (which we want to render to) and texels (which we access data from). The key to success here is to choose an orthogonal projection and a proper viewport that will enable a one to one mapping between geometry coordinates (used in rendering) and texture coordinates (used for data input) and pixel coordinates (used for data output). The mapping is based on the only value we have available so far, the size (in each dimension) we allocate textures with. One warning though: With texture2Ds, some scaling for the texture coordinates as explained above is still required. This is typically done in another part of the implementation and we explain it once we get there. With the projection and viewport set here, this is however trivial.
To set up the mapping, we essentially set the z coordinate in world coordinates to zero and apply the 1:1 mapping: The following lines can be added to the initFBO() routine:
// viewport for 1:1 pixel=texel=geometry mapping
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0, texSize, 0.0, texSize);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
glViewport(0, 0, texSize, texSize);
Using textures as render targets
One key functionality to achieve good performance rates is the possibility to use textures not only for data input, but also for data output: With the framebuffer_object extension, we can render directly to a texture. The only drawback is: Textures are either read-only or write-only. GPU hardware design provides an explanation: Internally, GPUs schedule rendering tasks into several pipelines working in parallel, independent of each other. We will discuss this later on in more detail. Allowing for simultaneous reads from and writes into the same texture would require an awful lot of logic to prevent reading from a previously modified position (read-modify-write). Even if that chip logic was available, there would be no way to implement this (in hardware or software) without seriously inhibiting performance: GPUs are not instruction-stream based von Neumann architectures, but data-stream based architectures. In our implementation, we thus need three textures for the two data vectors: One texture (read-only) is used for the vector x, another read-only texture for the input vector y and a third write-only texture that contains the result of the computation. This approach basically means that we rewrite our original calculation y = y + alpha * x to this: y_new = y_old + alpha * x.
The framebuffer object extension provides a very narrow interface to render to a texture. To use a texture as render target, we have to attach the texture to the FBO, assuming that the offscreen framebuffer is already bound:
glFramebufferTexture2DEXT(GL_FRAMEBUFFER_EXT,
GL_COLOR_ATTACHMENT0_EXT,
texture_target, texID, 0);
The first parameter is obligatory. The second parameter defines the attachment point (up to four different texture attachments are supported per FBO, this depends on the hardware and can be queried from GL_MAX_COLOR_ATTACHMENTS_EXT). The third and fourth parameter should be clear; they identify the actual texture to attach. The last parameter selects the mipmap level of the texture, we do not use mipmapping so we simply set it to zero.
Note that in order to successfully attach a texture, it just has to be allocated and defined by means of glTexImage2D(), it does not need to contain any useful data. It is a good analogy to think of FBOs as structs of pointers, in order to redirect rendering operations to a texture attachment, all we (conceptually) need to do is some pointer manipulation by means of OpenGL calls.
Unfortunately, the framebuffer_object specification only defines texture attachments with the format GL_RGB or GL_RGBA (the latter being important for us). LUMINANCE attachments will hopefully be defined in a follow-up extension. At the time of writing, NVIDIA hardware and the NVIDIA driver support them nontheless, but only in combination with the enumerants defined in NV_float_buffer. In other words, the distinction between formats that are allowed as floating point textures and formats that are allowed as floating point render targets or more precise, floating point color attachments, is essential. Color-renderable texture formats is the term used in the spec to make this distinction.
The following table summmarizes which texture formats and which texture targets are supported as render targets on various hardware platforms (many more are supported, we are however only interested in floating point formats!):
|
| NV3x | NV4x, G7x, G8x | ATI |
| texture 2D, ATI/ARB_texture_float, LUMINANCE | no | no | no |
| texture 2D, ATI/ARB_texture_float, RGB, RGBA | no | yes | yes |
| texture 2D, NV_float_buffer, LUMINANCE | no | no | no |
| texture 2D, NV_float_buffer, RGB, RGBA | no | no | no |
| texture RECT, ATI/ARB_texture_float, LUMINANCE | no | no | no |
| texture RECT, ATI/ARB_texture_float, RGB, RGBA | no | yes | yes |
| texture RECT, NV_float_buffer, LUMINANCE | yes | yes | no |
| texture RECT, NV_float_buffer, RGB, RGBA | yes | yes | no |
The bottom line of this table is that it is currently impossible to write portable code for all the listed GPUs. If you want to use LUMINANCE textures, you have to use texture rectangles on NVIDIA only. Portable code on ATI and newer NVIDIA hardware is already possible. It is impossible to write code that works on old NV3x and ATI hardware at the same time. The good news is that the changes to the code are more or less minimal, just a few switch-case statements or preprocessor ifdef's are required to write truely portable code that works on all the listed architectures, at least if a given application allows to be laid out in RGBA. I believe that the limitations implied by this table will be removed as soon as the ARB releases an extension that provides LUMINANCE attachments to FBOs. This will turn the NV_float_buffer extension into a NV3x legacy, and the ATI and ARB_texture_float enumerants will be usable on both ATI and newer NVIDIA hardware for LUMINANCE and RGBA texture formats.
Transferring data from CPU arrays to GPU textures
To transfer data (like the two vectors dataX and dataY we created previously) to a texture, we have to bind the texture to a texture target and schedule the data for transfer with an OpenGL call. It is essential that the array passed to the function as a pointer parameter is properly dimensioned. In the case of our vectors, LUMINANCE format implies the array must contain texSize by texSize elements, and for RGBA formats, we need an additional factor of four more elements. Since we use GL_FLOAT, the data has to be a pointer to an array of floats as defined above. Note that we have absolutely no control when the data will actually be transferred to graphics memory, this is entirely left to the driver. We can however be sure that once the GL call returns, we can safely alter the data on the CPU side without affecting the texture. Additionally we are guaranteed that the data will be available when we access the texture for the next time. That being said, we can dive into the code. On NVIDIA hardware, the following code is hardware-accelerated:
glBindTexture(texture_target, texID);
glTexSubImage2D(texture_target,0,0,0,texSize,texSize,
texture_format,GL_FLOAT,data);
The three zeros we pass as parameters define the offset and the mipmap level. We will ignore all of them because we do not use mipmaps and because we transfer a whole vector at once into a texture with the corresponding size.
On ATI hardware, the preferred technique is to transfer data to a texture that is already attached to a framebuffer object by just redirecting the OpenGL render target to the attachment and by issueing a conventional OpenGL framebuffer image manipulation call:
glDrawBuffer(GL_COLOR_ATTACHMENT0_EXT);
glRasterPos2i(0,0);
glDrawPixels(texSize,texSize,texture_format,GL_FLOAT,data);
The first call redirects the output. In the the second call, we use the origin as the reference position because we download the whole chunk of data into the texture with the last call.
In both cases, the CPU array is mapped row-wise to the texture. More detailed: For RGBA formats, the first four array elements end up in the red to alpha components of the first texel and so on. For LUMINANCE textures, the first two texels in a row contain the first two components of the data vector.
Transferring data from GPU textures to CPU arrays
The other way round, there are again two alternative ways to implement transfers from GPU textures to CPU arrays. The traditional OpenGL texturing approach involves binding the texture to a texture target and calling glGetTexImage(). The parameters should be clear by now:
glBindTexture(texture_target,texID);
glGetTexImage(texture_target,0,texture_format,GL_FLOAT,data);
If the texture to be read back to the host is already attached to a FBO attachment point, we can again perform the pointer redirection technique:
glReadBuffer(GL_COLOR_ATTACHMENT0_EXT);
glReadPixels(0,0,texSize,texSize,texture_format,GL_FLOAT,data);
Since we read back the whole texture from GPU memory to CPU memory, we pass the origin as the first two parameters. This technique is recommended.
One word of advice: Data transfers between main memory and GPU memory are expensive compared to computations on the GPU, so they should be used sparingly.
Refer to the section about issues in current driver implementations to avoid problems that I ran into.
Now it is time to lean back a little. I strongly suggest to start toying around before moving on to more advanced topics. Write a little example program and try to define textures with varying formats, targets and internal formats. Download data into them and read back the data again to a different CPU array to get acquainted with the techniques and implementation details. Try to put the different pieces of the puzzle together into a running program! The section about issues in current driver implementations and especially the sections about error checking in the appendix should be consulted to avoid problems.
For reference, this is the most minimalistic program I have come up with to achieve roundtrips, exemplarily using texture rectangles and ARB_texture_float on NVIDIA:
#include <stdio.h>
#include <stdlib.h>
#include <GL/glew.h>
#include <GL/glut.h>
int main(int argc, char **argv) {
// declare texture size, the actual data will be a vector
// of size texSize*texSize*4
int texSize = 2;
// create test data
float* data = (float*)malloc(4*texSize*texSize*sizeof(float));
float* result = (float*)malloc(4*texSize*texSize*sizeof(float));
for (int i=0; i<texSize*texSize*4; i++)
data[i] = i+1.0;
// set up glut to get valid GL context and
// get extension entry points
glutInit (&argc, argv);
glutCreateWindow("TEST1");
glewInit();
// viewport transform for 1:1 pixel=texel=data mapping
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0,texSize,0.0,texSize);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
glViewport(0,0,texSize,texSize);
// create FBO and bind it (that is, use offscreen render target)
GLuint fb;
glGenFramebuffersEXT(1,&fb);
glBindFramebufferEXT(GL_FRAMEBUFFER_EXT,fb);
// create texture
GLuint tex ;
glGenTextures (1, & tex );
glBindTexture(GL_TEXTURE_RECTANGLE_ARB, tex );
// set texture parameters
glTexParameteri(GL_TEXTURE_RECTANGLE_ARB,
GL_TEXTURE_MIN_FILTER, GL_NEAREST);
glTexParameteri(GL_TEXTURE_RECTANGLE_ARB,
GL_TEXTURE_MAG_FILTER, GL_NEAREST);
glTexParameteri(GL_TEXTURE_RECTANGLE_ARB,
GL_TEXTURE_WRAP_S, GL_CLAMP);
glTexParameteri(GL_TEXTURE_RECTANGLE_ARB,
GL_TEXTURE_WRAP_T, GL_CLAMP);
// define texture with floating point format
glTexImage2D(GL_TEXTURE_RECTANGLE_ARB,0,GL_RGBA 32F _ARB,
texSize,texSize,0,GL_RGBA,GL_FLOAT,0);
// attach texture
glFramebufferTexture2DEXT(GL_FRAMEBUFFER_EXT,
GL_COLOR_ATTACHMENT0_EXT,
GL_TEXTURE_RECTANGLE_ARB, tex ,0);
// transfer data to texture
glTexSubImage2D(GL_TEXTURE_RECTANGLE_ARB,0,0,0,texSize,texSize,
GL_RGBA,GL_FLOAT,data);
// and read back
glReadBuffer(GL_COLOR_ATTACHMENT0_EXT);
glReadPixels(0, 0, texSize, texSize,GL_RGBA,GL_FLOAT,result);
// print out results
printf("Data before roundtrip:/n");
for (int i=0; i<texSize*texSize*4; i++)
printf("%f/n",data[i]);
printf("Data after roundtrip:/n");
for (int i=0; i<texSize*texSize*4; i++)
printf("%f/n",result[i]);
// clean up
free(data);
free(result);
glDeleteFramebuffersEXT (1,&fb);
glDeleteTextures (1,& tex );
return 0;
}
You can download an equivalent version for ATI here for reference.
Back to top
GPGPU concept 2: Kernels = shaders
In this chapter, we discuss the fundamental difference in the computing model between GPUs and CPUs, and the impact on our way of thinking algorithmically and methodically. Once we have a clear understanding of the data-parallel paradigm GPUs subject to, programming shaders is fairly easy.
Loop-oriented CPU implementation vs. kernel-oriented data-parallel implementation
Let us first recall the problem we want to solve: y = y + alpha * x. On the CPU, we typically use a single loop over all array elements like this:
for (int i=0; i<N; i++)
dataY[i] = dataY[i] + alpha * dataX[i];
Two levels of computation are active at the same time: Outside the loop, the loop counter is incremented and compared with the length of our vectors, and inside the loop, we access the arrays at a fixed position which is determined by the loop counter and perform the actual computation we are interested in: a multiplication and an addition on each data element. It is important to note that the calculations performed on each data element in the vectors are independent of each other, for a given output position, we access distinct input memory locations and there are no data dependencies between elements in the result vector. If we had a vector processor that is capable of performing operations on whole vectors of length N or even N CPUs, we would not need the loop at all! This paradigm is commonly called SIMD (single instruction multiple data). On a side note: partial loop unrolling is a common technique in high performance computing to allow the compiler to make better usage of the extensions available in today's CPUs like SSE or SSE2.
The core idea of GPU computing for the problem we want to tackle in this tutorial should now be clear: We separate the outer loop from the inner calculations. The calculations we do inside the loop are extracted into a computational kernel: y_new[i] = y_old[i] + alpha * x[i]. Be aware that the kernel is no longer a vector expression but conceptually a scalar template of the underlying math that forms a single output value from a set of input values. For a single output element, there are no data dependencies with other output elements, and all dependencies to input elements can be described relatively..
In our example, the array index of a given output element is identical to the array indices of the input values, or more precisely, the input positions from all arrays are identical from the point of view of an output element. Another, less trivial dependency arises from the standard 1D Finite Difference scheme: y[i] = - x[i-1] + 2*x[i] - x[i+1]. Informally, the corresponding kernel would be: "Compute each value in the vector y by multiplying the the value of x by two at that position, and subtract the the value to the left and the value to the right".
The programmable part of the GPU we want to use in our computations, the so-called fragment pipeline, consists of several parallel processing units, up to 24 in the GeForce 7800GTX. The hardware and driver logic however that schedules each data item into the different pipelines is not programmable! So from a conceptual point of view, all work on the data items is performed independently, without any influence among the various "fragments in flight through the pipeline". In the previous chapter we discussed that we use textures as render targets (the end point of the pipeline) and that we store our vectors in textures. Thus, another useful analogy that is valid for our kind of computations is: The fragment pipeline behaves like a vector processor of the size of our textures. Although internally the computation is split up among the available fragment processors, we cannot control the order in which fragments are processed. All we know however is the "address", the coordinates (pixel coordinates in screen space) in the target texture where an individual data item will end up. We can therefore assume all work is done in parallel without any data interdependence. This paradigm is commonly referred to as data-parallel computing.
Now that we have extracted the computational kernel from our problem, we can discuss the way the programmable fragment pipeline is actually programmed. Kernels translate to shaders on the GPU, so what we have to do is to write an actual shader and include it into our implementation. In this tutorial, we discuss how to achieve this with the Cg shading language and the OpenGL shading language. The following two subsections are therefore partly redundant, the idea is that you pick one and skip the others because advantages and disadvantages of each language and runtime are beyond the scope of this tutorial.
Creating a shader with the Cg shading language
To use shaders with Cg, we have to distinguish between the shading language and the Cg runtime which we use to prepare the shader. There are two types of shaders available, corresponding to the two programmable stages of he graphics pipeline. In this tutorial, we rely on the fixed function pipeline in the vertex stage and only program the fragment shader: The fragment pipeline is much better suited for the kind of computations we pursue, using the vertex stage is an advanced topic beyond the scope of this tutorial. Additionally, the fragment pipeline traditionally provides more computational horsepower.
Let us start with writing the shader code itself. Recall that the kernel on the CPU contains some arithmetics, two lookups into the data arrays and a constant floating point value. We already know that textures are the equivalent of arrays on GPUs, so we use texture lookups instead of array lookups. In graphics terms, we sample the textures at given texture coordinates. We will postpone the question of how correct texture coordinates are calculated automatically by the hardware until the next chapter. To deal with the constant floating point value, we have two options: We can inline the value into the shader source code and dynamically recompile the shader whenever it changes, or, more efficiently, we can pass the value as a uniform ("uniform" as in "not changing over the whole render target") parameter. The following bit of code contrasts a very elaborate version of the kernel and the shader source:
float saxpy (
float2 coords : TEXCOORD0,
uniform sampler2D textureY,
uniform sampler2D textureX,
uniform float alpha ) : COLOR
{
float result;
float yval=y_old[i]; float y = tex2D(textureY,coords);
float xval=x[i]; float x = tex2D(textureX,coords);
y_new[i]=yval+alpha*xval; result = y + alpha * x;
return result;
}
Conceptually, a fragment shader like the one above is a tiny program that is executed for each fragment. In our case, the program is called saxpy. It receives several input parameters and returns a float. The colon syntax is called semantics binding: Input and output parameters are identified with various state variables of the fragment. We called this "address" in the previous section. The output value of the shader has to be bound to the COLOR semantics, even though this is not too intuitive in our case since we do not use colors in the traditional sense. Binding a tuple of floats (float 2 in Cg syntax) to the TEXCOORD0 semantics will cause the runtime to assign the texture coordinates that were computed in a previous stage of the graphics pipeline to each fragment. More on that later, for now, we can safely assume that we sample the textures at precisely the coordinates we want. The way we declare the textures in the parameter list and the actual lookup/sampling function depends on the texture target we use:
|
| texture2D | texture rectangle |
| sampler definition | uniform sampler2D | uniform samplerRECT |
| texture lookup | tex2D(name, coords) | texRECT(name, coords) |
To use four-channeled textures instead of luminance textures, we just replace the type of the variable that holds the result of a texture lookup (and of course the return value) with float4. Since GPUs are able to perform all calculations on four-tuples in parallel, the shader source for texture rectangles and RGBA textures reads:
float4 saxpy (
float2 coords : TEXCOORD0,
uniform samplerRECT textureY,
uniform samplerRECT textureX,
uniform float alpha ) : COLOR
{
float4 result;
float4 y = texRECT(textureY,coords);
float4 x = texRECT(textureX,coords);
result = y + alpha*x;
// equivalent: result.rgba=y.rgba+alpha*x.rgba
// or: result.r=y.r+alpha*x.y; result.g=...
return result;
}
We store the shader source in a char array or in a file to access it from our OpenGL program through the Cg runtime.
This subsection describes how to set up the Cg runtime in an OpenGL application. First, we need to include the Cg headers (it is sufficient to include <Cg/cgGL.h>) and add the Cg libraries to our compiler and linker options. Then, we declare some variables:
// Cg vars
CGcontext cgContext;
CGprofile fragmentProfile;
CGprogram fragmentProgram;
CGparameter yParam, xParam, alphaParam;
char* program_source = "float saxpy( [....] return result; } ";
The CGcontext is the entry point for the Cg runtime, since we want to program the fragment pipeline, we need a fragment profile (Cg is profile-based) and a program container for the program we just wrote. For the sake of simplicity, we also declare three handles to the parameters we use in the shader that are not bound to any semantics, and we use a global variable that contains the shader source we just wrote. We encapsulate all the Cg runtime initialization in one function. This is pretty straight forward, details are covered in the Cg manual which is available at the Cg Toolkit page.
void initCG(void) {
// set up Cg
cgContext = cgCreateContext();
fragmentProfile = cgGLGetLatestProfile(CG_GL_FRAGMENT);
cgGLSetOptimalOptions(fragmentProfile);
// create fragment program
fragmentProgram = cgCreateProgram (
cgContext,CG_SOURCE,program_source,
fragmentProfile,"saxpy",NULL);
// load program
cgGLLoadProgram (fragmentProgram);
// and get parameter handles by name
yParam = cgGetNamedParameter (fragmentProgram,"textureY");
xParam = cgGetNamedParameter (fragmentProgram,"textureX");
alphaParam = cgGetNamedParameter (fragmentProgram,"alpha");
}
Setting up a shader for computation with the OpenGL shading language
It is not neccessary to include any additional header files or libraries to use the OpenGL Shading Language, it is built into the driver. Three OpenGL extensions (ARB_shader_objects, ARB_vertex_shader and ARB_fragment_shader) define the API, and the specification defines the language itself. Both API and language are now part of core OpenGL 2.x, and underwent some renamings. We will use the core API names here, the older version is provided for download.
We define a series of global variables for the program, the shader and handles to the data variables we want to access in the shaders. The first two are simply data containers managed by OpenGL, one program can consist of exactly one vertex and fragment shader, both subtypes can consist of several shader sources, a shader can in turn be part of several programs etc.
// GLSL vars
GLuint glslProgram;
GLuint fragmentShader;
GLint yParam, xParam, alphaParam;
Writing the actual shaders is similar to using the Cg shading language, so we just present two example shaders. The two main differences are probably that all variables we assign explicitly through the runtime are declared globally, and that instead of parameter bindings to GL state variables, we use a set of reserved variable names that are bound implicitely to the current GL state. Also note that GLSL reflects the extension mechanism of OpenGL, so we need to explicitly enable the GL extensions we need, in this case, GL_ARB_texture_rectangle to be able to use the reserved keywords for sampling texture rectangles.
// shader for luminance data // shader for RGBA data
// and texture rectangles // and texture2D
#extension GL_ARB_texture_rectangle : enable
uniform sampler2DRect textureY; uniform sampler2D textureY;
uniform sampler2DRect textureX; uniform sampler2D textureX;
uniform float alpha; uniform float alpha;
void main(void) { void main(void) {
float y = texture2DRect( vec4 y = texture2D(
textureY, textureY,
gl_TexCoord[0].st).x; gl_TexCoord[0].st);
float x = texture2DRect( vec4 x = texture2D(
textureX, textureX
gl_TexCoord[0].st).x; gl_TexCoord[0].st);
gl_FragColor.x = gl_FragColor =
y + alpha*x; y + alpha*x;
} }
We can encapsule the initialization of the GLSL runtime again into a single function. The GLSL API is designed to mimic the traditional compilation and linking process. For details please refer to the Orange Book or take a look at the various GLSL tutorials available on the internet. Lighthouse 3D's GLSL tutorial is recommended.
void initGLSL(void) {
// create program object
glslProgram = glCreateProgram();
// create shader object (fragment shader)
fragmentShader = glCreateShader(GL_FRAGMENT_SHADER_ARB);
// set source for shader
const GLchar* source = textureParameters.shader_source;
glShaderSource(fragmentShader, 1, &source, NULL);
// compile shader
glCompileShader(fragmentShader);
// check for errors
printInfoLog(fragmentShader);
// attach shader to program
glAttachShader (glslProgram, fragmentShader);
// link into full program, use fixed function vertex pipeline
glLinkProgram(glslProgram);
// check for errors
printInfoLog(glslProgram);
// Get location of the texture samplers for future use
yParam = glGetUniformLocation(glslProgram, "textureY");
xParam = glGetUniformLocation(glslProgram, "textureX");
alphaParam = glGetUniformLocation(glslProgram, "alpha");
}
Back to top
GPGPU concept 3: Computing = drawing
In this chapter, we will discuss how everything we learned in the previous chapters of this tutorial is pieced together to perform the scaled vector-vector addition y_new = y_old + alpha * x. In the accompanying implementation, this is encapsulated in the performComputation() routine. Four steps are required: The kernel is activated, input and output arrays are assigned using the shader runtime (Cg, GLSL or plain OpenGL), and finally, the computation is triggered by rendering a suitable geometry. This last step is embarrassingly simple after all the foundations we laid in the previous chapters.
Preparing the computational kernel
To activate the kernel using the Cg runtime, the fragment profile we created previously is enabled and the shader we wrote and already loaded is bound. Only one shader can be active at the same time. More correctly, only one vertex and one fragment shader can be active at a given time, but we rely on the fixed function pipeline at the vertex stage in this tutorial, as mentioned before. This requires just two lines of code:
// enable fragment profile
cgGLEnableProfile(fragmentProfile);
// bind saxpy program
cgGLBindProgram(fragmentProgram);
Using the GLSL runtime, this is even easier: If our program has been linked successfully, all we have to do is to install the program as part of the rendering pipeline:
glUseProgram(glslProgram);
Setting input arrays / textures
Using the Cg runtime, linking and enabling the input arrays/textures y_old and x and the uniform value (the right hand side of the equation, texture identifiers y_oldTexID and xTexID respectively) is straight-forward use of the Cg runtime:
// enable texture y_old (read-only)
cgGLSetTextureParameter(yParam, y_oldTexID);
cgGLEnableTextureParameter(yParam);
// enable texture x (read-only)
cgGLSetTextureParameter(xParam, xTexID);
cgGLEnableTextureParameter(xParam);
// enable scalar alpha
cgSetParameter 1f (alphaParam, alpha);
In GLSL, we have to bind our textures to different texture units (the Cg runtime does this automatically for us) and pass these units to our uniform parameters:
// enable texture y_old (read-only)
glActiveTexture(GL_TEXTURE0);
glBindTexture(textureParameters.texTarget,yTexID[readTex]);
glUniform1i(yParam,0); // texunit 0
// enable texture x (read-only)
glActiveTexture(GL_TEXTURE1);
glBindTexture(textureParameters.texTarget,xTexID);
glUniform1i(xParam, 1); // texunit 1
// enable scalar alpha
glUniform 1f (alphaParam,alpha);
Setting output arrays / textures
Defining the output array (the left side of the equation) is essentially the same operation like the one we discussed to transfer data to a texture already attached to our FBO. Simple pointer manipulation by means of GL calls is all we need. In other words, we simply redirect the output: If we did not do so yet, we attach the target texture to our FBO and use standard GL calls to use it as the render target:
// attach target texture to first attachment point
glFramebufferTexture2DEXT(GL_FRAMEBUFFER_EXT,
GL_COLOR_ATTACHMENT0_EXT,
texture_target, y_newTexID, 0);
// set the texture as render target
glDrawBuffer (GL_COLOR_ATTACHMENT0_EXT);
Let us briefly recall what we did so far. We enabled a 1:1 mapping between the target pixels, the texture coordinates and the geometry we are about to draw. We also prepared a fragment shader we want to execute for each fragment. All that remains to be done is: Render a "suitable geometry" that ensures that our fragment shader is executed for each data element we stored in the target texture. In other words, we make sure that each data item is transformed uniquely into a fragment. Given our projection and viewport settings, this is embarrassingly easy: All we need is a filled quad that covers the whole viewport! We define the quad with standard OpenGL (immediate mode) rendering calls. This means we directly specify the four corner vertices of the quad. We also assign texture coordinates as vertex attributes to the four vertices. The four vertices will be transformed to screen space by the fixed function vertex stage which we did not program. The rasterizer, a fixed-function part of the graphics pipeline located between the vertex and fragment stage, will then perform a bilinear interpolation for each pixel that is covered by the quad, interpolating both the position (in screen space) of the pixels and the vertex attributes (texture coordinates) from the vertex data. It generates a fragment for each pixel covered by the quad. The interpolated values will be passed automatically to the fragment shader because we used the binding semantics when we wrote the shader. In other words, rendering a simple quad serves as a data stream generator for the fragment program. Because of the viewport and projection settings we implemented, the whole output array / texture) is covered by the quad, and is thus transformed into a fragment automatically, including interpolated attributes such as texture coordinates. Consequently, the fragment program execution is triggered for each output position in the array: By rendering a simple textured quad, we achieve that the kernel is executed for each data item in the original vector / texture! This is what we wanted to achieve throughout the whole tutorial.
Using texture rectangles (texture coordinates are identical to pixel coordinates), we use a few code lines like this:
// make quad filled to hit every pixel/texel
glPolygonMode(GL_FRONT,GL_FILL);
// and render quad
glBegin(GL_QUADS);
glTexCoord 2f (0.0, 0.0);
glVertex 2f (0.0, 0.0);
glTexCoord 2f (texSize, 0.0);
glVertex 2f (texSize, 0.0);
glTexCoord 2f (texSize, texSize);
glVertex 2f (texSize, texSize);
glTexCoord 2f (0.0, texSize);
glVertex 2f (0.0, texSize);
glEnd();
Using texture2Ds (and therefore normalized texture coordinates), this is equivalent to:
// make quad filled to hit every pixel/texel
glPolygonMode(GL_FRONT,GL_FILL);
// and render quad
glBegin(GL_QUADS);
glTexCoord 2f (0.0, 0.0);
glVertex 2f (0.0, 0.0);
glTexCoord 2f (1.0, 0.0);
glVertex 2f (texSize, 0.0);
glTexCoord 2f (1.0, 1.0);
glVertex 2f (texSize, texSize);
glTexCoord 2f (0.0, 1.0);
glVertex 2f (0.0, texSize);
glEnd();
One remark for advanced programmers: In our shaders, we only use one set of texture coordinates. It is possible to define several sets of (different) texture coordinates per vertex, refer to the documentation of glMultiTexCoord() for details.
Back to top
After the calculation is performed, the resulting values are stored in the target texture y_new.
In a proper application, the result is typically used as input for a subsequent computation. On the GPU, this means we perform another rendering pass and bind different input and output textures, eventually a different kernel etc. The most important ingredient for this kind of multipass rendering is the ping pong technique.
Ping pong is a technique to alternately use the output of a given rendering pass as input in the next one. In our case, (recall y_new = y_old + alpha * x), this means that we swap the role of the two textures y_new and y_old, since we do not need the values in y_old any more once the new values have been computed. There are three possible ways to implement this kind of data reuse (take a look at Simon Green's FBO slides for additional material on this):
- Use one FBO with one attachment per texture that is rendered to, and bind a different FBO in each rendering pass using glBindFramebufferEXT().
- Use one FBO, reattach the render target texture in each pass using glFramebufferTexture2DEXT().
- Use one FBO and multiple attachment points, switch using glDrawBuffer().
Since there are up to four attachment points available per FBO and since the last approach turns out to be fastest, we will explain how to ping pong between different attachments.
To do this, we first need a set of management variables:
// two textures identifiers referencing y_old and y_new
GLuint yTexID[2];
// ping pong management vars
int writeTex = 0;
int readTex = 1;
GLenum attachmentpoints[] = { GL_COLOR_ATTACHMENT0_EXT,
GL_COLOR_ATTACHMENT1_EXT
};
During the computation, all we need to do now is to pass the correct value from these two tupels to the corresponding OpenGL calls, and to swap the two index variables after each pass:
// attach two textures to FBO
glFramebufferTexture2DEXT(GL_FRAMEBUFFER_EXT,
attachmentpoints[writeTex],
texture_Target, yTexID[writeTex], 0);
glFramebufferTexture2DEXT(GL_FRAMEBUFFER_EXT,
attachmentpoints[readTex],
texture_Target, yTexID[readTex], 0);
// enable fragment profile, bind program [...]
// enable texture x (read-only) and uniform parameter [...]
// iterate computation several times
for (int i=0; i<numIterations; i++) {
// set render destination
glDrawBuffer (attachmentpoints[writeTex]);
// enable texture y_old (read-only)
cgGLSetTextureParameter(yParam, yTexID[readTex]);
cgGLEnableTextureParameter(yParam);
// and render multitextured viewport-sized quad
// swap role of the two textures (read-only source becomes
// write-only target and the other way round):
swap();
}
Back to top
A brief overview of the accompanying source code
The accompagying example program uses all concepts explained in this tutorial to perform the following operations:
- Create one floating point texture per vector.
- Transfer initial data to these textures.
- Create a shader using Cg or GLSL.
- Iterate the computation several times to demonstrate the ping pong technique.
- Transfer the results back to main memory.
- Compare the results with a CPU reference solution.
Variable parts of the implementation
In the code, a series of structs are used to store the possible parameters to OpenGL calls such as the enumerants from the various floating point texture extensions, the texture format, the slightly different shaders they imply etc. This is an example of such a struct for the luminance format, texture rectangles and the NV_float_buffer extension:
rect_nv_r_32.name = "TEXRECT - float_NV - R - 32";
rect_nv_r_32.texTarget = GL_TEXTURE_RECTANGLE_ARB;
rect_nv_r_32.texInternalFormat = GL_FLOAT_R32_NV;
rect_nv_r_32.texFormat = GL_LUMINANCE;
rect_nv_r_32.shader_source = "float saxpy ("/
"in float2 coords : TEXCOORD0,"/
"uniform samplerRECT textureY,"/
"uniform samplerRECT textureX,"/
"uniform float alpha ) : COLOR {"/
"float y = texRECT (textureY, coords);"/
"float x = texRECT (textureX, coords);"/
"return y+alpha*x; }";
To extract a working version for a special case, just do a search and replace, or use the second command line parameter which is just a string literal like rect_nv_r_32. In the application, the global variable textureParameters points to the struct actually used.
The program uses command line parameters for configuration. If you run the program without any parameters, it will print out an explanation of the various parameters. Be warned though that the parsing code for the command line is rather unstable (writing proper parsing code is clearly beyond the scope of this tutorial and would blow up the code, which is why I refrained from it) and will probably crash if calling conventions are ignored. I strongly recomment to use the output level parameter to display the results of the computation for low problem sizes, especially if you do not trust the computed errors. Please refer to the batch files included for examples.
The program can be used to test, for a given GPU and driver combination, which internal formats and texture layouts can be used together with the framebuffer object extension. There are batch files called run_test_*.bat that run the program with different command line parameters and generate a report file. The linux Makefile provides a similar test target as well.
This mode is included just for fun. It times a sequence of computations and prints out MFLOP/s rates for given problem sizes. Like every benchmark, it should be taken with a grain of salt. It especially does not measure the peak GPU performance, but instead something that is close to peak GPU bandwidth due to the low arithmetic intensity of this example code. Refer to the command line parameters on how to enable it.
Back to top
Summary of differences between Windows and Linux, ATI and NVIDIA
On NVIDIA hardware, both the Windows and Linux drivers expose the same functionality with respect to this tutorial. On ATI hardware, Linux is not very well supported at the time of writing (Nov.2005).
Take a good look at the table summarizing renderable texture formats on various hardware.
The source code as provided for download is set to work on NV4x and above. ATI users should apply the following modification: Change the code of the transferToTexture() function by commenting out the NVIDIA-specific and commenting in the ATI specific part as described here and in the code comments. Also be aware of the issues and limitations listed in the next paragraph.
Cg 1.5 combined with the precompiled freeglut that ships with certain Linux distributions somehow breaks "true offscreen rendering" since a totally meaningless empty window pops up. There are three workarounds: Live with it. Use "real GLUT" instead of freeglut. Use plain X as described in the OpenGL.org wiki (just leave out the mapping of the created window to avoid it being displayed).
- Transferring data to a texture with glTexSubImage2D() causes strange data swizzles (RGBA becomes BGRA) on ATI. This is a confirmed bug in Catalyst 6.9 and earlier and will hopefully be fixed in the future. Use glDrawPixels() instead.
- glDrawPixels() requires a shader to be bound on NV3x. Use glTexSubImage() instead (which is recommended for all NVIDIA GPUs anyway).
- Catalyst 6.9 seems to bork for problem sizes greater than 512^2. Since I do no longer have access to ATI on Windows, I am inviting volunteers to examine this issue more profoundly.
- ATI does not support sampling of texture rectangles in GLSL, the shader refuses to compile. samplerRect or sampler2DRect are recognized as reserved keywords (as defined in the ARB_texture_rextangle extension specification, but the driver does not support them. Use Cg instead.
- Texture download with glDrawPixels() fails on ATI when texturing is enabled. This is not a bug, but an issue that can be very hard to debug.
- NVIDIA hardware refuses to render into the last column of a texture of maximum size. This means although glGetIntegerv(GL_MAX_TEXTURE_SIZE,&maxtexsize); reports 4096, you can only render into a texture up to 4095 by 4095. This is a known bug that will hopefully be fixed in the future.
It is highly recommended to add calls to this useful function in your own codes very often while debugging.
void checkGLErrors(const char *label) {
GLenum errCode;
const GLubyte *errStr;
if ((errCode = glGetError()) != GL_NO_ERROR) {
errStr = gluErrorString(errCode);
printf("OpenGL ERROR: ");
printf((char*)errStr);
printf("(Label: ");
printf(label);
printf(")/n.");
}
}
The EXT_framebuffer_object extension defines a neat debugging routine which I just list here for reference. To decode the error messages, reading the section about framebuffer completeness in the specification is recommended.
bool checkFramebufferStatus() {
GLenum status;
status=(GLenum)glCheckFramebufferStatusEXT(GL_FRAMEBUFFER_EXT);
switch(status) {
case GL_FRAMEBUFFER_COMPLETE_EXT:
return true;
case GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT_EXT:
printf("Framebuffer incomplete,incomplete attachment/n");
return false;
case GL_FRAMEBUFFER_UNSUPPORTED_EXT:
printf("Unsupported framebuffer format/n");
return false;
case GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT_EXT:
printf("Framebuffer incomplete,missing attachment/n");
return false;
case GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS_EXT:
printf("Framebuffer incomplete,attached images
must have same dimensions/n");
return false;
case GL_FRAMEBUFFER_INCOMPLETE_FORMATS_EXT:
printf("Framebuffer incomplete,attached images
must have same format/n");
return false;
case GL_FRAMEBUFFER_INCOMPLETE_DRAW_BUFFER_EXT:
printf("Framebuffer incomplete,missing draw buffer/n");
return false;
case GL_FRAMEBUFFER_INCOMPLETE_READ_BUFFER_EXT:
printf("Framebuffer incomplete,missing read buffer/n");
return false;
}
return false;
}
Error checking with Cg is done slightly different. A self-written error handler is passed to the Cg runtime as an error callback function.
// register the error callback once the context has been created
cgSetErrorCallback(cgErrorCallback);
// callback function
void cgErrorCallback(void) {
CGerror lastError = cgGetError();
if(lastError) {
printf(cgGetErrorString(lastError));
printf(cgGetLastListing(cgContext));
}
}
To see the results of shader compilation and/or program linking, use these functions by passing the program or shader identifier to it:
/**
* error checking for GLSL
*/
void printProgramInfoLog(GLuint obj) {
int infologLength = 0;
int charsWritten = 0;
char *infoLog;
glGetProgramiv(obj, GL_INFO_LOG_LENGTH, &infologLength);
if (infologLength > 1) {
infoLog = (char *)malloc(infologLength);
glGetProgramInfoLog(obj, infologLength, &charsWritten, infoLog);
printf(infoLog);
printf("/n");
free(infoLog);
}
}
void printShaderInfoLog(GLuint obj) {
int infologLength = 0;
int charsWritten = 0;
char *infoLog;
glGetShaderiv(obj, GL_INFO_LOG_LENGTH, &infologLength);
if (infologLength > 1) {
infoLog = (char *)malloc(infologLength);
glGetShaderInfoLog(obj, infologLength, &charsWritten, infoLog);
printf(infoLog);
printf("/n");
free(infoLog);
}
}
You can use queries like this for most states, refer to the GLSL documentation and specification for more details.
Back to top
Writing this tutorial would have been impossible without all contributors at the GPGPU.org forums. They answered all my questions patiently, and without them, starting to work in the GPGPU field (and consequently, writing this tutorial) would have been impossible. I owe you one, guys!
Andrew Corrigan, Wojciech Jaskowski, Matthias Miemczyk, Stephan Wagner, André Braun and especially Thomas Rohkämper were invaluably helpful in proof-reading the tutorial and beta-testing the implementation. Thanks a lot!
(c) 2005-2007 Dominik Göddeke, University of Dortmund , Germany .
The example code for this tutorial is released under a weakened version of the zlib/libPNG licence which basically says: Feel free to use the code in any way you want, but do not blame me if it does not work.
This software is provided 'as-is', without any express or implied
warranty. In no event will the author be held liable for any
damages arising from the use of this software.
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it
and redistribute it freely.
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
