lua解释执行脚本流程

#include "lua.hpp"

#include <iostream>
using namespace std;

#pragma comment(lib, "lua5.1.lib")

struct lua_guard{
    lua_State *pL;
    lua_guard(lua_State *s) :pL(s){}
    ~lua_guard(){ lua_close(pL); }
};

int main(){
    lua_guard g(lua_open());
    luaL_openlibs(g.pL);
    int err;
    if ((err = luaL_dofile(g.pL, "mylua.lua") != 0)){
        throw runtime_error("open lua file error");
    }
    system("pause");
    return 0;
}

首先利用lua提供的函数luaL_dofile来执行一个lua脚本。

可以看到有两个过程,首先luaL_loadfile函数将lua文件加载进来然后进行词法语法语义分析,得到一个closure函数放入栈中,接着调用lua_pcall函数来执行栈顶的closure。

我们先来看看第一个过程:

首先在luaL_loadfile中真正加载lua文件的是lua_load函数

在lua_load中调用了luaD_protectedparser来进行parse过程

在luaD_protectedparser中又调用了f_parser

在f_parser中根据一些选择来分别处理不同的情况,我们示例中会跑到luaY_parser函数中去,在luaY_parser中会调用luaX_next进行分析,这个函数会首先读取源文件中的第一个token

最后在luaX_next中调用了llex,llex是真正切出token的例程

在读取了第一个token后luaX_next返回,相关的词法信息保存在了lexstate中,接着luaY_parser调用chunk函数来递归的生成一个chunk块

在chunk中循环读取下一个token并根据token的类型一层一层的递归的生成chunk,将chunks根据层次组合成tree,位于root的是最外层chunk

在分析完lua脚本后会返回到f_parser,在f_parser中接着调用luaF_newLclosure来将分析结果包裹成一个closure然后push到lua栈中

接下来分析第二个过程:

当第一个过程完成后lua栈顶存放着一个closure,luaL_dofile中调用lua_pcall让其来调用这个closure:

在lua_pcall中调用了f_call

f_call中又接着调用了luaD_call,传入了被调用的closure和参数个数

最后在luaD_call中调用了luaV_execute来执行closure中的opcode

luaV_execute既是lua虚拟机执行opcode的函数,其中可以看到一个无限循环,利用switch (GET_OPCODE(i))来根据不同的opcode进行不同的过程

void luaV_execute (lua_State *L, int nexeccalls) {
  LClosure *cl;
  StkId base;
  TValue *k;
  const Instruction *pc;
 reentry:  /* entry point */
  lua_assert(isLua(L->ci));
  pc = L->savedpc;
  cl = &clvalue(L->ci->func)->l;
  base = L->base;
  k = cl->p->k;
  /* main loop of interpreter */
  for (;;) {
    const Instruction i = *pc++;
    StkId ra;
    if ((L->hookmask & (LUA_MASKLINE | LUA_MASKCOUNT)) &&
        (--L->hookcount == 0 || L->hookmask & LUA_MASKLINE)) {
      traceexec(L, pc);
      if (L->status == LUA_YIELD) {  /* did hook yield? */
        L->savedpc = pc - 1;
        return;
      }
      base = L->base;
    }
    /* warning!! several calls may realloc the stack and invalidate `ra' */
    ra = RA(i);
    lua_assert(base == L->base && L->base == L->ci->base);
    lua_assert(base <= L->top && L->top <= L->stack + L->stacksize);
    lua_assert(L->top == L->ci->top || luaG_checkopenop(i));
    switch (GET_OPCODE(i)) {
      case OP_MOVE: {
        setobjs2s(L, ra, RB(i));
        continue;
      }
      case OP_LOADK: {
        setobj2s(L, ra, KBx(i));
        continue;
      }
      case OP_LOADBOOL: {
        setbvalue(ra, GETARG_B(i));
        if (GETARG_C(i)) pc++;  /* skip next instruction (if C) */
        continue;
      }
      case OP_LOADNIL: {
        TValue *rb = RB(i);
        do {
          setnilvalue(rb--);
        } while (rb >= ra);
        continue;
      }
      case OP_GETUPVAL: {
        int b = GETARG_B(i);
        setobj2s(L, ra, cl->upvals[b]->v);
        continue;
      }
      case OP_GETGLOBAL: {
        TValue g;
        TValue *rb = KBx(i);
        sethvalue(L, &g, cl->env);
        lua_assert(ttisstring(rb));
        Protect(luaV_gettable(L, &g, rb, ra));
        continue;
      }
      case OP_GETTABLE: {
        Protect(luaV_gettable(L, RB(i), RKC(i), ra));
        continue;
      }
      case OP_SETGLOBAL: {
        TValue g;
        sethvalue(L, &g, cl->env);
        lua_assert(ttisstring(KBx(i)));
        Protect(luaV_settable(L, &g, KBx(i), ra));
        continue;
      }
      case OP_SETUPVAL: {
        UpVal *uv = cl->upvals[GETARG_B(i)];
        setobj(L, uv->v, ra);
        luaC_barrier(L, uv, ra);
        continue;
      }
      case OP_SETTABLE: {
        Protect(luaV_settable(L, ra, RKB(i), RKC(i)));
        continue;
      }
      case OP_NEWTABLE: {
        int b = GETARG_B(i);
        int c = GETARG_C(i);
        sethvalue(L, ra, luaH_new(L, luaO_fb2int(b), luaO_fb2int(c)));
        Protect(luaC_checkGC(L));
        continue;
      }
      case OP_SELF: {
        StkId rb = RB(i);
        setobjs2s(L, ra+1, rb);
        Protect(luaV_gettable(L, rb, RKC(i), ra));
        continue;
      }
      case OP_ADD: {
        arith_op(luai_numadd, TM_ADD);
        continue;
      }
      case OP_SUB: {
        arith_op(luai_numsub, TM_SUB);
        continue;
      }
      case OP_MUL: {
        arith_op(luai_nummul, TM_MUL);
        continue;
      }
      case OP_DIV: {
        arith_op(luai_numdiv, TM_DIV);
        continue;
      }
      case OP_MOD: {
        arith_op(luai_nummod, TM_MOD);
        continue;
      }
      case OP_POW: {
        arith_op(luai_numpow, TM_POW);
        continue;
      }
      case OP_UNM: {
        TValue *rb = RB(i);
        if (ttisnumber(rb)) {
          lua_Number nb = nvalue(rb);
          setnvalue(ra, luai_numunm(nb));
        }
        else {
          Protect(Arith(L, ra, rb, rb, TM_UNM));
        }
        continue;
      }
      case OP_NOT: {
        int res = l_isfalse(RB(i));  /* next assignment may change this value */
        setbvalue(ra, res);
        continue;
      }
      case OP_LEN: {
        const TValue *rb = RB(i);
        switch (ttype(rb)) {
          case LUA_TTABLE: {
            setnvalue(ra, cast_num(luaH_getn(hvalue(rb))));
            break;
          }
          case LUA_TSTRING: {
            setnvalue(ra, cast_num(tsvalue(rb)->len));
            break;
          }
          default: {  /* try metamethod */
            Protect(
              if (!call_binTM(L, rb, luaO_nilobject, ra, TM_LEN))
                luaG_typeerror(L, rb, "get length of");
            )
          }
        }
        continue;
      }
      case OP_CONCAT: {
        int b = GETARG_B(i);
        int c = GETARG_C(i);
        Protect(luaV_concat(L, c-b+1, c); luaC_checkGC(L));
        setobjs2s(L, RA(i), base+b);
        continue;
      }
      case OP_JMP: {
        dojump(L, pc, GETARG_sBx(i));
        continue;
      }
      case OP_EQ: {
        TValue *rb = RKB(i);
        TValue *rc = RKC(i);
        Protect(
          if (equalobj(L, rb, rc) == GETARG_A(i))
            dojump(L, pc, GETARG_sBx(*pc));
        )
        pc++;
        continue;
      }
      case OP_LT: {
        Protect(
          if (luaV_lessthan(L, RKB(i), RKC(i)) == GETARG_A(i))
            dojump(L, pc, GETARG_sBx(*pc));
        )
        pc++;
        continue;
      }
      case OP_LE: {
        Protect(
          if (lessequal(L, RKB(i), RKC(i)) == GETARG_A(i))
            dojump(L, pc, GETARG_sBx(*pc));
        )
        pc++;
        continue;
      }
      case OP_TEST: {
        if (l_isfalse(ra) != GETARG_C(i))
          dojump(L, pc, GETARG_sBx(*pc));
        pc++;
        continue;
      }
      case OP_TESTSET: {
        TValue *rb = RB(i);
        if (l_isfalse(rb) != GETARG_C(i)) {
          setobjs2s(L, ra, rb);
          dojump(L, pc, GETARG_sBx(*pc));
        }
        pc++;
        continue;
      }
      case OP_CALL: {
        int b = GETARG_B(i);
        int nresults = GETARG_C(i) - 1;
        if (b != 0) L->top = ra+b;  /* else previous instruction set top */
        L->savedpc = pc;
        switch (luaD_precall(L, ra, nresults)) {
          case PCRLUA: {
            nexeccalls++;
            goto reentry;  /* restart luaV_execute over new Lua function */
          }
          case PCRC: {
            /* it was a C function (`precall' called it); adjust results */
            if (nresults >= 0) L->top = L->ci->top;
            base = L->base;
            continue;
          }
          default: {
            return;  /* yield */
          }
        }
      }
      case OP_TAILCALL: {
        int b = GETARG_B(i);
        if (b != 0) L->top = ra+b;  /* else previous instruction set top */
        L->savedpc = pc;
        lua_assert(GETARG_C(i) - 1 == LUA_MULTRET);
        switch (luaD_precall(L, ra, LUA_MULTRET)) {
          case PCRLUA: {
            /* tail call: put new frame in place of previous one */
            CallInfo *ci = L->ci - 1;  /* previous frame */
            int aux;
            StkId func = ci->func;
            StkId pfunc = (ci+1)->func;  /* previous function index */
            if (L->openupval) luaF_close(L, ci->base);
            L->base = ci->base = ci->func + ((ci+1)->base - pfunc);
            for (aux = 0; pfunc+aux < L->top; aux++)  /* move frame down */
              setobjs2s(L, func+aux, pfunc+aux);
            ci->top = L->top = func+aux;  /* correct top */
            lua_assert(L->top == L->base + clvalue(func)->l.p->maxstacksize);
            ci->savedpc = L->savedpc;
            ci->tailcalls++;  /* one more call lost */
            L->ci--;  /* remove new frame */
            goto reentry;
          }
          case PCRC: {  /* it was a C function (`precall' called it) */
            base = L->base;
            continue;
          }
          default: {
            return;  /* yield */
          }
        }
      }
      case OP_RETURN: {
        int b = GETARG_B(i);
        if (b != 0) L->top = ra+b-1;
        if (L->openupval) luaF_close(L, base);
        L->savedpc = pc;
        b = luaD_poscall(L, ra);
        if (--nexeccalls == 0)  /* was previous function running `here'? */
          return;  /* no: return */
        else {  /* yes: continue its execution */
          if (b) L->top = L->ci->top;
          lua_assert(isLua(L->ci));
          lua_assert(GET_OPCODE(*((L->ci)->savedpc - 1)) == OP_CALL);
          goto reentry;
        }
      }
      case OP_FORLOOP: {
        lua_Number step = nvalue(ra+2);
        lua_Number idx = luai_numadd(nvalue(ra), step); /* increment index */
        lua_Number limit = nvalue(ra+1);
        if (luai_numlt(0, step) ? luai_numle(idx, limit)
                                : luai_numle(limit, idx)) {
          dojump(L, pc, GETARG_sBx(i));  /* jump back */
          setnvalue(ra, idx);  /* update internal index... */
          setnvalue(ra+3, idx);  /* ...and external index */
        }
        continue;
      }
      case OP_FORPREP: {
        const TValue *init = ra;
        const TValue *plimit = ra+1;
        const TValue *pstep = ra+2;
        L->savedpc = pc;  /* next steps may throw errors */
        if (!tonumber(init, ra))
          luaG_runerror(L, LUA_QL("for") " initial value must be a number");
        else if (!tonumber(plimit, ra+1))
          luaG_runerror(L, LUA_QL("for") " limit must be a number");
        else if (!tonumber(pstep, ra+2))
          luaG_runerror(L, LUA_QL("for") " step must be a number");
        setnvalue(ra, luai_numsub(nvalue(ra), nvalue(pstep)));
        dojump(L, pc, GETARG_sBx(i));
        continue;
      }
      case OP_TFORLOOP: {
        StkId cb = ra + 3;  /* call base */
        setobjs2s(L, cb+2, ra+2);
        setobjs2s(L, cb+1, ra+1);
        setobjs2s(L, cb, ra);
        L->top = cb+3;  /* func. + 2 args (state and index) */
        Protect(luaD_call(L, cb, GETARG_C(i)));
        L->top = L->ci->top;
        cb = RA(i) + 3;  /* previous call may change the stack */
        if (!ttisnil(cb)) {  /* continue loop? */
          setobjs2s(L, cb-1, cb);  /* save control variable */
          dojump(L, pc, GETARG_sBx(*pc));  /* jump back */
        }
        pc++;
        continue;
      }
      case OP_SETLIST: {
        int n = GETARG_B(i);
        int c = GETARG_C(i);
        int last;
        Table *h;
        if (n == 0) {
          n = cast_int(L->top - ra) - 1;
          L->top = L->ci->top;
        }
        if (c == 0) c = cast_int(*pc++);
        runtime_check(L, ttistable(ra));
        h = hvalue(ra);
        last = ((c-1)*LFIELDS_PER_FLUSH) + n;
        if (last > h->sizearray)  /* needs more space? */
          luaH_resizearray(L, h, last);  /* pre-alloc it at once */
        for (; n > 0; n--) {
          TValue *val = ra+n;
          setobj2t(L, luaH_setnum(L, h, last--), val);
          luaC_barriert(L, h, val);
        }
        continue;
      }
      case OP_CLOSE: {
        luaF_close(L, ra);
        continue;
      }
      case OP_CLOSURE: {
        Proto *p;
        Closure *ncl;
        int nup, j;
        p = cl->p->p[GETARG_Bx(i)];
        nup = p->nups;
        ncl = luaF_newLclosure(L, nup, cl->env);
        ncl->l.p = p;
        for (j=0; j<nup; j++, pc++) {
          if (GET_OPCODE(*pc) == OP_GETUPVAL)
            ncl->l.upvals[j] = cl->upvals[GETARG_B(*pc)];
          else {
            lua_assert(GET_OPCODE(*pc) == OP_MOVE);
            ncl->l.upvals[j] = luaF_findupval(L, base + GETARG_B(*pc));
          }
        }
        setclvalue(L, ra, ncl);
        Protect(luaC_checkGC(L));
        continue;
      }
      case OP_VARARG: {
        int b = GETARG_B(i) - 1;
        int j;
        CallInfo *ci = L->ci;
        int n = cast_int(ci->base - ci->func) - cl->p->numparams - 1;
        if (b == LUA_MULTRET) {
          Protect(luaD_checkstack(L, n));
          ra = RA(i);  /* previous call may change the stack */
          b = n;
          L->top = ra + n;
        }
        for (j = 0; j < b; j++) {
          if (j < n) {
            setobjs2s(L, ra + j, ci->base - n + j);
          }
          else {
            setnilvalue(ra + j);
          }
        }
        continue;
      }
    }
  }
}

转载地址: http://www.cnblogs.com/zxh1210603696/p/4458473.html

  • 0
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
提供的源码资源涵盖了安卓应用、小程序、Python应用和Java应用等多个领域,每个领域都包含了丰富的实例和项目。这些源码都是基于各自平台的最新技术和标准编写,确保了在对应环境下能够无缝运行。同时,源码中配备了详细的注释和文档,帮助用户快速理解代码结构和实现逻辑。 适用人群: 这些源码资源特别适合大学生群体。无论你是计算机相关专业的学生,还是对其他领域编程感兴趣的学生,这些资源都能为你提供宝贵的学习和实践机会。通过学习和运行这些源码,你可以掌握各平台开发的基础知识,提升编程能力和项目实战经验。 使用场景及目标: 在学习阶段,你可以利用这些源码资源进行课程实践、课外项目或毕业设计。通过分析和运行源码,你将深入了解各平台开发的技术细节和最佳实践,逐步培养起自己的项目开发和问题解决能力。此外,在求职或创业过程中,具备跨平台开发能力的大学生将更具竞争力。 其他说明: 为了确保源码资源的可运行性和易用性,特别注意了以下几点:首先,每份源码都提供了详细的运行环境和依赖说明,确保用户能够轻松搭建起开发环境;其次,源码中的注释和文档都非常完善,方便用户快速上手和理解代码;最后,我会定期更新这些源码资源,以适应各平台技术的最新发展和市场需求。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值