[U-Boot] [PATCH v5 29/30] zynq: Enable CONFIG_DEFAULT_DEVICE_TREE

Enabled default dts files on respective pre-board config
files this is way MAKEALL will works. and it's up to user
to build specific dts by specifying at build time.

$ make zynq_zc70x_config
$ make -->  with default dts zynq-zc702.dts
or
$ make DEVICE_TREE=zynq-zc702 --> Same configuration with zynq-zc706.dts

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
 include/configs/zynq_microzed.h | 1 +
 include/configs/zynq_zc70x.h    | 1 +
 include/configs/zynq_zc770.h    | 3 +++
 include/configs/zynq_zed.h      | 1 +
 4 files changed, 6 insertions(+)

diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
index 549a664..b0328a2 100644
--- a/include/configs/zynq_microzed.h
+++ b/include/configs/zynq_microzed.h
@@ -19,6 +19,7 @@
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_DEFAULT_DEVICE_TREE	zynq-microzed
 
 #include <configs/zynq-common.h>
 
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index 0a7fa97..673660e 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -22,6 +22,7 @@
 #define CONFIG_ZYNQ_I2C0
 #define CONFIG_ZYNQ_EEPROM
 #define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc702
 
 #include <configs/zynq-common.h>
 
diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
index 16b9047..8aa96e7 100644
--- a/include/configs/zynq_zc770.h
+++ b/include/configs/zynq_zc770.h
@@ -20,15 +20,18 @@
 # define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
 # define CONFIG_ZYNQ_SDHCI0
 # define CONFIG_ZYNQ_SPI
+# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm010
 
 #elif defined(CONFIG_ZC770_XM012)
 # define CONFIG_ZYNQ_SERIAL_UART1
 # undef CONFIG_SYS_NO_FLASH
+# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm012
 
 #elif defined(CONFIG_ZC770_XM013)
 # define CONFIG_ZYNQ_SERIAL_UART0
 # define CONFIG_ZYNQ_GEM1
 # define CONFIG_ZYNQ_GEM_PHY_ADDR1	7
+# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm013
 
 #else
 # define CONFIG_ZYNQ_SERIAL_UART0
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
index 31926df..412dede 100644
--- a/include/configs/zynq_zed.h
+++ b/include/configs/zynq_zed.h
@@ -20,6 +20,7 @@
 
 #define CONFIG_ZYNQ_SDHCI0
 #define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE	zynq-zed
 
 #include <configs/zynq-common.h>
 
-- 
1.8.3

原文地址：https://lists.denx.de/pipermail/u-boot/2014-January/170478.html