OpenOCD compile on Windows

最新推荐文章于 2024-05-29 17:44:49 发布

sunrock

最新推荐文章于 2024-05-29 17:44:49 发布

阅读量4.4k

点赞数

分类专栏： Driver 文章标签： command character svn gcc windows debugging

本文链接：https://blog.csdn.net/sunrock/article/details/2223702

版权

Open On-Chip Debugger (OpenOCD) 是一个用于嵌入式目标设备调试、编程和边界扫描测试的开源工具，支持通过JTAG接口连接。本文档将介绍在Windows上安装Cygwin，下载OpenOCD源代码，并详细说明如何编译OpenOCD，包括可能遇到的编译错误及其解决方案。

摘要由CSDN通过智能技术生成

OpenOCD compile on Windows

About Open On-Chip Debugger

The Open On-Chip Debugger (openocd) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. The targets are interfaced using JTAG (IEEE 1149.1) compliant hardware, but this may be extended to other connection types in the future.

Openocd currently supports Wiggler (clones), FTDI FT2232 based JTAG interfaces, the Amontec JTAG Accelerator, and the Gateworks GW1602. It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920t, ARM922t, ARM926ej-s, ARM966e-s), XScale (PXA27x,PXA25x, IXP42x) and Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged.

Flash writing is supported for external CFI compatible flashes (Intel and AMD/Spansion command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3 and STM32x). Preliminary support for using the LPC3180's NAND flash controller is included.

This