一:实验要求
二:根据题意来新建拓扑(划分子网并汇总)
三:根据上面我们划分的地址我们开始配环回地址和骨干IP
R1
<Huawei>system-view
[Huawei]sysname r1[r1]interface loop
[r1]interface LoopBack 0
[r1-LoopBack0]ip add 192.168.1.65 27
[r1-LoopBack0]q[r1]interface loop
[r1]interface LoopBack 1
[r1-LoopBack1]ip add 192.168.1.97 27
[r1-LoopBack1]q
开始配IP[r1]interface g 0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.1.1 30
Jan 15 2024 01:15:31-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
R2
<Huawei>system-view
[Huawei]sysname r2
[r2]int
[r2]interface loop
[r2]interface LoopBack 0
[r2-LoopBack0]ip add 192.168.1.129 27
[r2-LoopBack0]q
[r2]interface LoopBack 1
[r2-LoopBack1]ip add 192.168.1.161 27
[r2-LoopBack1]q开始配IP
[r2]int
[r2]interface g 0/0/0
[r2-GigabitEthernet0/0/0]ip add 192.168.1.2 30
Jan 15 2024 01:16:12-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]q
[r2]int
[r2]interface g 0/0/1
[r2-GigabitEthernet0/0/1]ip add 192.168.1.5 30
Jan 15 2024 01:16:33-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]q
R3
<Huawei>
<Huawei>sys
<Huawei>system-view
[Huawei]sysname r3
[r3]interface g 0/0/0
[r3-GigabitEthernet0/0/0]ip add 192.168.1.6 30
Jan 15 2024 01:17:27-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]q
[r3]interface LoopBack 0
[r3-LoopBack0]ip add 3.3.3.3 24
四:配好IP后我们·开始对直连路由进行通讯
五:编写RIP 让他们进行信息的互通
R1
[r1]rip
[r1-rip-1]
[r1-rip-1]ver
[r1-rip-1]vers
[r1-rip-1]version 2
[r1-rip-1]net
[r1-rip-1]network 192.168.1.0
[r1-rip-1]q
R2
[r2]rip
[r2-rip-1]version 2
[r2-rip-1]net
[r2-rip-1]network 192.168.1.0
[r2-rip-1]
R3
[r3]rip
[r3-rip-1]version 2
[r3-rip-1]network 192.168.1.0
[r3-rip-1]def
[r3-rip-1]default-cost
[r3-rip-1]default-route o
[r3-rip-1]default-route originate
[r3-rip-1]q
六:查看路由表
R1
R2
R3
七:ping 3.3.3.3