3. 定时器控制 LED 灯闪烁（定时器 1 ）

最新推荐文章于 2024-07-01 10:28:00 发布

A_zhaozhongliang

最新推荐文章于 2024-07-01 10:28:00 发布

阅读量2.9k

点赞数 1

本文链接：https://blog.csdn.net/A_zhaozhongliang/article/details/80457047

版权

本文详细讲解如何利用定时器1实现LED灯的周期性闪烁，通过编程设置定时器参数，达到控制硬件LED闪烁的效果，适用于嵌入式系统开发。

摘要由CSDN通过智能技术生成

#include <TIM1.H>
void TIM1_Init(void)
{
	TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
	NVIC_InitTypeDef NVIC_InitStructure;
	//使能定时器1时钟
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1,ENABLE);//定时器1在桥2上
	TIM_TimeBaseStructure.TIM_Period = 10000-1;//ARR
	TIM_TimeBaseStructure.TIM_Prescaler = 7200;//PSC
	TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
	TIM_TimeBaseInit(TIM1, & TIM_TimeBaseStructure);
	//使能定时器1中断
	TIM_ITConfig(TIM1,TIM_IT_Update,ENABLE);
	//配置定时器1中断优先级
	NVIC_InitStructure.NVIC_IRQChannel = TIM1_UP_IRQn;//刷新中断
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
	NVIC_Init(&NVIC_InitStructure);
	//使能定时器1
	TIM_Cmd(TIM1,ENABLE);
	
}