u-boot下运行led测试测程序

硬件平台：友善之臂mini2440

u-boot：2010.03

交叉工具链：arm-linux-gcc 4.3.2

led1         led2            led3         led4

GPB5      GPB6          GPB7      GPB8

code:main.c

#include "led.h"

int main(void)
{
int count = 0;
show("hello.world!\n");

led_x_init(LED1);
led_x_init(LED2);
led_x_init(LED4);
led_x_init(LED3);

while(1)
{
led_x_on(LED1);
led_x_off(LED2);
led_x_on(LED3);
led_x_off(LED4);

delay();

led_x_off(LED1);
led_x_on(LED2);
led_x_off(LED3);
led_x_on(LED4);

delay();
if (count++ > 5)
break;
}

show("hello.linux!\n");

return 0;
}

led.h:

#ifndef __LED_H__
#define __LED_H__

#include "mini2440addr.h"
#include "delay.h"

#define LED1 0x5
#define LED2 0x6
#define LED3 0x7
#define LED4 0x8

#define GPB_OUT 0x1
#define GPB_IN 0x0

#define led_x_init(n) {rGPBCON &= ~(0x11<<((n)*2));rGPBCON |= (GPB_OUT<<((n)*2));}
#define led_x_on(n) (rGPBDAT &= ~(1<<(n)))
#define led_x_off(n) (rGPBDAT |= 1<<(n))

void (*show)(char*,...) = 0x33f91708;

#endif /*__LED_H__*/

Makefile:

led.bin:main.o delay.o
arm-linux-ld -Ttext 0x30000000 main.o delay.o -o led.elf
arm-linux-objcopy -O binary led.elf led.bin
arm-linux-objdump -d led.elf > led.dls

delay.o: delay.c
arm-linux-gcc -c delay.c -o delay.o
main.o: main.c
arm-linux-gcc -c main.c -o main.o

clean:
rm led.bin led.o led.elf led.dls

调试过程中发现一个问题：led3和led4的初始化放在led1和led2之前的话，led3和led4的初始化会失败，原因还在查找中，找到后补上日志！