原文链接:https://datatracker.ietf.org/doc/html/rfc8445#appendix-C
附录C. Connectivity-Check Bandwidth【连接检查带宽】
The tables below show, for IPv4 and IPv6, the bandwidth required for performing connectivity checks, using different Ta values (given in ms) and different ufrag sizes (given in bytes).
下表显示了 IPv4 和 IPv6 执行连接检查所需的带宽,使用不同的 Ta 值(以 ms 为单位)和不同的 ufrag 大小(以字节为单位)。
The results were provided by Jusin Uberti (Google) on 11 April 2016.
结果由 Jusin Uberti (Google) 于 2016 年 4 月 11 日提供。
IP 版本: IPv4
包长度 (bytes): 108 + ufrag
IP 版本: IPv6
包长度 (bytes): 128 + ufrag