博世BOSCH EDI DESADV发货通知详解

知行EDI

已于 2022-10-14 16:40:25 修改

阅读量1.4k

点赞数

分类专栏：知行edi EDI电子数据交换 | 知行软件文章标签： EDI 报文详解 DESADV BOSCH EDIFACT

于 2022-10-14 16:40:17 首次发布

本文链接：https://blog.csdn.net/Cara_EDI_Consultant/article/details/127323375

版权

EDI电子数据交换 | 知行软件同时被 2 个专栏收录

617 篇文章 14 订阅

订阅专栏

知行edi

538 篇文章 3 订阅

订阅专栏

本文将从发送角度出发，带大家了解如何给博世BOSCH发送DESADV发货通知报文，并将其转换为博世BOSCH要求的EDIFACT格式。

在文章如何读懂EDIFACT报文？中，我们对EDIFACT已经做了详细的解读，大家可以以此为基础，开始深入了解 DESADV发货通知。

本文将对符合EDIFACT国际报文标准的DESADV发货通知报文进行详细解读，并且展示通过知行之桥EDI系统转换后得到的EDIFACT文件。

下图为BOSCH DESADV发货通知示例报文转换前及经过知行之桥EDI系统转换后的结果对比图。

利用知行之桥EDI系统可以将XML文件转换为符合国际标准的 EDIFACT文件，再通过EDI系统发送给BOSCH即可，企业可以从自己的业务系统中生成如下XML文件，或者将自己的业务数据填进如下的XML文件。每个字段的业务含义都已做了明确的注释。

1.博世BOSCH发货通知 XML 模板详解

<?xml version="1.0" encoding="utf8"?>
<EDI_DESADV>
  <Version>1.0.0</Version>
  <!--UNB-->
  <Mode RefDes="UNB11">T</Mode>
  <!--可填写T或者P，T为测试模式，P为生产模式-->
  <!--BGM-->
  <MessageNameCode RefDes="BGM0101">351</MessageNameCode>
  <!--可填写343/351，343为货运代理提货通知限定符，351为发货通知限定符-->
  <MessageName RefDes="BGM0104">KANBAN</MessageName>
  <!--与DELJIT相关的发货通知-->
  <MessageNumber RefDes="BGM0201">Test MessageNumber</MessageNumber>
  <!--发货编号-->
  <MessageFunctionCode RefDes="BGM03">9</MessageFunctionCode>
  <!--原始文件-->
  <DocumentMessageDateTimeInfo qualifier="DTM01/DTM0101:137">
    <!--DTM-->
    <DateOrTimeOrPeriod RefDes="DTM0102">Test DateOrTimeOrPeriod</DateOrTimeOrPeriod>
    <!--文件日期-->
    <DateTimePeriodFormatQualifier RefDes="DTM0103">102</DateTimePeriodFormatQualifier>
    <!--文件日期格式限定符：102 CCYYMMDD,203 CCYYMMDDHHMM-->
  </DocumentMessageDateTimeInfo>
  <EstimatedArrivalDateTimeInfo qualifier="DTM01/DTM0101:132">
    <!--DTM-->
    <DateOrTimeOrPeriod RefDes="DTM0102">Test DateOrTimeOrPeriod</DateOrTimeOrPeriod>
    <!--预计运输抵达日期-->
    <DateTimePeriodFormatQualifier RefDes="DTM0103">102</DateTimePeriodFormatQualifier>
    <!--预计运输抵达日期格式限定符：102 CCYYMMDD,203 CCYYMMDDHHMM-->
  </EstimatedArrivalDateTimeInfo>
  <ShipmentDateTimeRequestedInfo qualifier="DTM01/DTM0101:10">
    <!--DTM-->
    <DateOrTimeOrPeriod RefDes="DTM0102">Test DateOrTimeOrPeriod</DateOrTimeOrPeriod>
    <!--指定的运输日期-->
    <DateTimePeriodFormatQualifier RefDes="DTM0103">102</DateTimePeriodFormatQualifier>
    <!--指定的运输日期格式限定符：102 CCYYMMDD,203 CCYYMMDDHHMM-->
  </ShipmentDateTimeRequestedInfo>
  <ConsignmentMeasurement qualifier="MEA01:AAX">
    <!--寄售测量-->
    <!--MEA-->
    <MeasurementDimentionCode RefDes="MEA0201">AAD</MeasurementDimentionCode>
    <!--可填写AAD/AAL/ABJ，AAD：托运总重量限定符；AAL:净重；ABJ：体积-->
    <UnitOfMeasurement RefDes="MEA0301">KGM</UnitOfMeasurement>
    <!--计量单位，可填写KGM/MTQ，KGM:千克；MTQ:立方米-->
    <MeasurementValue RefDes="MEA0302">Test MeasurementValue</MeasurementValue>
    <!--测量值，托运总重量/净重/体积-->
  </ConsignmentMeasurement>
  <Reference>
    <!--RFFLoop1-->
    <!--RFF-->
<TransportContractDocumentIdentifier RefDes="RFF0102" qualifier="RFF0101:AAS">Test TransportContractDocumentIdentifier</TransportContractDocumentIdentifier>
<!--运输合同文件ID-->
  </Reference>
    <Reference>
<UniqueGoodsShipmentIdentifier RefDes="RFF0102" qualifier="RFF0101:AVU">Test UniqueGoodsShipmentIdentifier</UniqueGoodsShipmentIdentifier>
<!--特殊货物运输ID-->
  </Reference>
  <Reference>
<TransportContractReferenceNumber RefDes="RFF0102" qualifier="RFF0101:AHI">Test TransportContractReferenceNumber</TransportContractReferenceNumber>
<!--运输合同参考号-->
  </Reference>  
<BuyerInfo qualifier="NAD01:BY">
    <!--NADLoop1-->
    <!--NAD-->
    <PartyId RefDes="NAD0201">Test PartyId</PartyId>
    <!--买方ID-->
    <CodeListResponsibleAgencyCode RefDes="NAD0203">91</CodeListResponsibleAgencyCode>
    <!--可填写91/92，91：由卖方指定，92：由买方指定-->
    <PartyName RefDes="NAD0401">Test PartyName</PartyName>
    <!--买方名称-->
    <PartyName2 RefDes="NAD0402">Test PartyName2</PartyName2>
    <!--买方名称2-->
    <StreetAndNumberOrPostOfficeBox RefDes="NAD0501">Test StreetAndNumberOrPostOfficeBox</StreetAndNumberOrPostOfficeBox>
    <!--买方街道-->
    <CityName RefDes="NAD06">Test CityName</CityName>
    <!--买方城市名-->
    <CountrySubEntityDetail RefDes="NAD07">
      <NameCode RefDes="NAD0701">Test NameCode</NameCode>
      <!--买方城市详细信息-->
    </CountrySubEntityDetail>
    <PostCodeIdentification RefDes="NAD08">Test PostCodeIdentification</PostCodeIdentification>
    <!--买方邮编-->
    <CountryCode RefDes="NAD09">DE</CountryCode>
    <!--买方国家ID，例如：DE为德国-->
    <ContactInformation>
      <!--CTALoop1-->
      <!--CTA-->
      <ContactFunctionCode RefDes="CTA01">IC</ContactFunctionCode>
      <!--买方联系信息限定符-->
      <DepartmentOrEmployee RefDes="CTA02">
        <Identification RefDes="CTA0201">Test Identification</Identification>
        <!--买方联系ID-->
        <Name RefDes="CTA0202">Test Name</Name>
        <!--买方联系姓名-->
      </DepartmentOrEmployee>
      <CommunicationContact>
        <!--COM-->
        <CommunicationAddressIdentifier RefDes="COM0101">Test CommunicationAddressIdentifier</CommunicationAddressIdentifier>
        <!--买方联系地址ID-->
        <CommunicationMeansTypeCode RefDes="COM0102">TE</CommunicationMeansTypeCode>
        <!--买方联系方式限定符可填写：FX/TE/EM，FX:传真；TE:电话；EM:电子邮件-->
      </CommunicationContact>
    </ContactInformation>
  </BuyerInfo>
  <SellerInfo qualifier="NAD01:SE">
    <!--NADLoop1-->
    <!--NAD-->
    <PartyId RefDes="NAD0201">Test PartyId</PartyId>
    <!--卖方ID-->
    <CodeListResponsibleAgencyCode RefDes="NAD0203">92</CodeListResponsibleAgencyCode>
    <!--92：由买方指定-->
    <PartyName RefDes="NAD0401">Test PartyName</PartyName>
    <!--卖方名称-->
    <PartyName2 RefDes="NAD0402">Test PartyName2</PartyName2>
    <!--卖方名称2-->
    <StreetAndNumberOrPostOfficeBox RefDes="NAD0501">Test StreetAndNumberOrPostOfficeBox</StreetAndNumberOrPostOfficeBox>
    <!--卖方街道-->
    <CityName RefDes="NAD06">Test CityName</CityName>
    <!--卖方城市名-->
    <CountrySubEntityDetail RefDes="NAD07">
      <NameCode RefDes="NAD0701">Test NameCode</NameCode>
      <!--卖方国家或地区细分-->
    </CountrySubEntityDetail>
    <PostCodeIdentification RefDes="NAD08">Test PostCodeIdentification</PostCodeIdentification>
    <!--卖方邮编-->
    <CountryCode RefDes="NAD09">DE</CountryCode>
    <!--卖方国家代码，DE：德国-->
    <ContactInformation>
      <!--CTALoop1-->
      <!--CTA-->
      <ContactFunctionCode RefDes="CTA01">IC</ContactFunctionCode>
      <!--卖方联系信息限定符-->
      <DepartmentOrEmployee RefDes="CTA02">
        <Identification RefDes="CTA0201">Test Identification</Identification>
        <!--卖方联系ID-->
        <Name RefDes="CTA0202">Test Name</Name>
        <!--卖方联系姓名-->
      </DepartmentOrEmployee>
      <CommunicationContact>
        <!--COM-->
        <CommunicationAddressIdentifier RefDes="COM0101">Test CommunicationAddressIdentifier</CommunicationAddressIdentifier>
        <!--卖方联系信息ID-->
        <CommunicationMeansTypeCode RefDes="COM0102">TE</CommunicationMeansTypeCode>
        <!--卖方联系方式限定符，可填写：FX/TE/EM，FX:传真；TE:电话；EM:电子邮件-->
      </CommunicationContact>
    </ContactInformation>
  </SellerInfo>
  <SupplierInfo qualifier="NAD01:SU">
    <!--NADLoop1-->
    <!--NAD-->
    <PartyId RefDes="NAD0201">Test PartyId</PartyId>
    <!--供应商ID-->
    <CodeListResponsibleAgencyCode RefDes="NAD0203">92</CodeListResponsibleAgencyCode>
    <!--买方指定-->
    <PartyName RefDes="NAD0401">Test PartyName</PartyName>
    <!--供应商名称-->
    <PartyName2 RefDes="NAD0402">Test PartyName2</PartyName2>
    <!--供应商名称-->
    <StreetAndNumberOrPostOfficeBox RefDes="NAD0501">Test StreetAndNumberOrPostOfficeBox</StreetAndNumberOrPostOfficeBox>
    <!--供应商街道-->
    <CityName RefDes="NAD06">Test CityName</CityName>
    <!--供应商城市名-->
    <CountrySubEntityDetail RefDes="NAD07">
      <NameCode RefDes="NAD0701">Test NameCode</NameCode>
      <!--供应商国家或地区细分-->
    </CountrySubEntityDetail>
    <PostCodeIdentification RefDes="NAD08">Test PostCodeIdentification</PostCodeIdentification>
    <!--供应商邮编-->
    <CountryCode RefDes="NAD09">DE</CountryCode>
    <!--供应商国家代码，DE:德国-->
    <ContactInformation>
      <!--CTALoop1-->
      <!--CTA-->
      <ContactFunctionCode RefDes="CTA01">IC</ContactFunctionCode>
      <!--联系信息标识符-->
      <DepartmentOrEmployee RefDes="CTA02">
        <Identification RefDes="CTA0201">Test Identification</Identification>
        <!--供应商联系ID-->
        <Name RefDes="CTA0202">Test Name</Name>
        <!--供应商联系名称-->
      </DepartmentOrEmployee>
      <CommunicationContact>
        <!--COM-->
        <CommunicationAddressIdentifier RefDes="COM0101">Test CommunicationAddressIdentifier</CommunicationAddressIdentifier>
        <!--供应商联系地址ID-->
        <CommunicationMeansTypeCode RefDes="COM0102">TE</CommunicationMeansTypeCode>
      </CommunicationContact>
      <!--供应商联系方式限定符可填写：FX/TE/EM，FX:传真；TE:电话；EM:电子邮件-->
    </ContactInformation>
  </SupplierInfo>
  <ShipToInfo qualifier="NAD01:ST">
    <!--NADLoop1-->
    <!--NAD-->
    <PartyId RefDes="NAD0201">Test PartyId</PartyId>
    <!--收货方ID-->
    <CodeListResponsibleAgencyCode RefDes="NAD0203">92</CodeListResponsibleAgencyCode>
    <!--由买方指定-->
    <PartyName RefDes="NAD0401">Test PartyName</PartyName>
    <!--收货方名称-->
    <PartyName2 RefDes="NAD0402">Test PartyName2</PartyName2>
    <!--收货方名称1-->
    <StreetAndNumberOrPostOfficeBox RefDes="NAD0501">Test StreetAndNumberOrPostOfficeBox</StreetAndNumberOrPostOfficeBox>
    <!--收货方街道-->
    <CityName RefDes="NAD06">Test CityName</CityName>
    <!--收货方城市名-->
    <CountrySubEntityDetail RefDes="NAD07">
      <NameCode RefDes="NAD0701">Test NameCode</NameCode>
      <!--收货方国家或地区细分-->
    </CountrySubEntityDetail>
    <PostCodeIdentification RefDes="NAD08">Test PostCodeIdentification</PostCodeIdentification>
    <!--收货方邮编-->
    <CountryCode RefDes="NAD09">DE</CountryCode>
    <!--收货方国家代码，DE:德国-->
    <PlaceOrPortOfDischarge qualifier="LOC01:11">
      <!--LOC-->
      <LocationIdentification RefDes="LOC02">
        <LocationID RefDes="LOC0201">Test LocationID</LocationID>
        <!--卸货点地址ID-->
      </LocationIdentification>
    </PlaceOrPortOfDischarge>
    <ContactInformation>
      <!--CTALoop1-->
      <!--CTA-->
      <ContactFunctionCode RefDes="CTA01">IC</ContactFunctionCode>
      <!--收货方联系信息限定符-->
      <DepartmentOrEmployee RefDes="CTA02">
        <Identification RefDes="CTA0201">Test Identification</Identification>
        <!--收货方联系明细-->
        <Name RefDes="CTA0202">Test Name</Name>
        <!--收货方联系名称-->
      </DepartmentOrEmployee>
      <CommunicationContact>
        <!--COM-->
        <CommunicationAddressIdentifier RefDes="COM0101">Test CommunicationAddressIdentifier</CommunicationAddressIdentifier>
        <!--收货方联系地址ID-->
        <CommunicationMeansTypeCode RefDes="COM0102">TE</CommunicationMeansTypeCode>
        <!--收货方联系方式限定符可填写：FX/TE/EM，FX:传真；TE:电话；EM:电子邮件-->
      </CommunicationContact>
    </ContactInformation>
  </ShipToInfo>
  <ShipFromInfo qualifier="NAD01:SF">
    <!--NADLoop1-->
    <!--NAD-->
    <PartyId RefDes="NAD0201">Test PartyId</PartyId>
    <!--发货方ID-->
    <CodeListResponsibleAgencyCode RefDes="NAD0203">92</CodeListResponsibleAgencyCode>
    <!--由买方指定-->
    <PartyName RefDes="NAD0401">Test PartyName</PartyName>
    <!--发货方名称-->
    <PartyName2 RefDes="NAD0402">Test PartyName2</PartyName2>
    <!--发货方名称2-->
    <StreetAndNumberOrPostOfficeBox RefDes="NAD0501">Test StreetAndNumberOrPostOfficeBox</StreetAndNumberOrPostOfficeBox>
    <!--发货方街道-->
    <CityName RefDes="NAD06">Test CityName</CityName>
    <!--发货方城市-->
    <CountrySubEntityDetail RefDes="NAD07">
      <NameCode RefDes="NAD0701">Test NameCode</NameCode>
      <!--发货方国家或地区细分-->
    </CountrySubEntityDetail>
    <PostCodeIdentification RefDes="NAD08">Test PostCodeIdentification</PostCodeIdentification>
    <!--发货方邮编-->
    <CountryCode RefDes="NAD09">DE</CountryCode>
    <!--发货方国家代码，DE:德国-->
    <ContactInformation>
      <!--CTALoop1-->
      <!--CTA-->
      <ContactFunctionCode RefDes="CTA01">IC</ContactFunctionCode>
      <!--发货方联系信息限定符-->
      <DepartmentOrEmployee RefDes="CTA02">
        <Identification RefDes="CTA0201">Test Identification</Identification>
        <!--发货方联系信息-->
        <Name RefDes="CTA0202">Test Name</Name>
        <!--发货方联系名称-->
      </DepartmentOrEmployee>
      <CommunicationContact>
        <!--COM-->
        <CommunicationAddressIdentifier RefDes="COM0101">Test CommunicationAddressIdentifier</CommunicationAddressIdentifier>
        <!--发货方联系地址-->
        <CommunicationMeansTypeCode RefDes="COM0102">TE</CommunicationMeansTypeCode>
        <!--发货方联系方式限定符可填写：FX/TE/EM，FX:传真；TE:电话；EM:电子邮件-->
      </CommunicationContact>
    </ContactInformation>
  </ShipFromInfo>
  <FreightForwarderInfo qualifier="NAD01:FW">
    <!--NADLoop1-->
    <!--NAD-->
    <PartyId RefDes="NAD0201">Test PartyId</PartyId>
    <!--货运转运商ID-->
    <PartyName RefDes="NAD0401">Test PartyName</PartyName>
    <!--货运转运商名称-->
    <PartyName2 RefDes="NAD0402">Test PartyName2</PartyName2>
    <!--货运转运商名称-->
    <StreetAndNumberOrPostOfficeBox RefDes="NAD0501">Test StreetAndNumberOrPostOfficeBox</StreetAndNumberOrPostOfficeBox>
    <!--货运转运商街道-->
    <CityName RefDes="NAD06">Test CityName</CityName>
    <!--货运转运商城市名-->
    <CountrySubEntityDetail RefDes="NAD07">
      <NameCode RefDes="NAD0701">Test NameCode</NameCode>
      <!--货运转运商国家或地区细分-->
    </CountrySubEntityDetail>
    <PostCodeIdentification RefDes="NAD08">Test PostCodeIdentification</PostCodeIdentification>
    <!--货运转运商邮编-->
    <CountryCode RefDes="NAD09">DE</CountryCode>
    <!--货运转运商国家代码，DE:德国-->
    <ContactInformation>
      <!--CTALoop1-->
      <!--CTA-->
      <ContactFunctionCode RefDes="CTA01">IC</ContactFunctionCode>
      <!--货运转运商联系信息限定符-->
      <DepartmentOrEmployee RefDes="CTA02">
        <Identification RefDes="CTA0201">Test Identification</Identification>
        <!--货运转运商联系ID-->
        <Name RefDes="CTA0202">Test Name</Name>
        <!--货运转运商联系名称-->
      </DepartmentOrEmployee>
      <CommunicationContact>
        <!--COM-->
        <CommunicationAddressIdentifier RefDes="COM0101">Test CommunicationAddressIdentifier</CommunicationAddressIdentifier>
        <!--货运转运商联系地址ID-->
        <CommunicationMeansTypeCode RefDes="COM0102">TE</CommunicationMeansTypeCode>
        <!--货运转运商联系方式限定符可填写：FX/TE/EM，FX:传真；TE:电话；EM:电子邮件-->
      </CommunicationContact>
    </ContactInformation>
  </FreightForwarderInfo>
  <EquipmentDetails>
    <!--EQDLoop1-->
    <!--EQD-->
    <EquipmentTypeCode RefDes="EQD01">TE</EquipmentTypeCode>
    <!--装运限定符，可填写：TE/CN/ZZZ TE:拖车；CN：集装箱；ZZZ：混合装运-->
    <EquipmentIdentification RefDes="EQD02">
      <EquipmentId RefDes="EQD0201">Test EquipmentId</EquipmentId>
      <!--装运ID-->
    </EquipmentIdentification>
  </EquipmentDetails>
  <Level>
    <!--CPSLoop1-->
    <!--CPS-->
    <PackagingLevelCode RefDes="CPS03">1</PackagingLevelCode>
    <!--包装水平，可填写：1/4，1：内包装，4：无包装-->
    <PackageInformation>
      <!--PACLoop1-->
      <!--PAC-->
      <PackageNumber RefDes="PAC01">123456</PackageNumber>
      <!--包装编号-->
      <PackageTypeIdentification RefDes="PAC04">
        <ItemDescriptionTypeCode RefDes="PAC0401">F</ItemDescriptionTypeCode>
        <!--包装类型编码，F：自由格式-->
        <TypeOfPackages RefDes="PAC0402">Test TypeOfPackages</TypeOfPackages>
        <!--买方包装类型编码-->
        <ItemNumberTypeCode RefDes="PAC0403">IN</ItemNumberTypeCode>
        <!--物料类型编码，IN：买方物料编号-->
        <TypeOfPackages RefDes="PAC0404">Test TypeOfPackages</TypeOfPackages>
        <!--供应商包装类型编码-->
        <ItemNumberTypeCode2 RefDes="PAC0405">SA</ItemNumberTypeCode2>
        <!--供应商货号编码-->
      </PackageTypeIdentification>
      <PackageMeasurement qualifier="MEA01:AAY">
        <!--MEA-->
        <MeasurementDimentionCode RefDes="MEA0201">G</MeasurementDimentionCode>
        <!--测量类型编码，可填写：G/AAL/LN/WD/HT，G:毛重，AAL:净重；LN:长度；WD:宽度；HT：宽度-->
        <UnitOfMeasurement RefDes="MEA0301">KGM</UnitOfMeasurement>
        <!--测量单位，可填写：KGM/CMT，KGM:千克；CMT:厘米-->
        <MeasurementValue RefDes="MEA0302">Test MeasurementValue</MeasurementValue>
        <!--测量值-->
      </PackageMeasurement>
      <QuantityDetail>
        <!--QTY-->
        <MaximumStackability RefDes="QTY0102" qualifier="QTY0101:171">Test MaximumStackability</MaximumStackability>
        <!--最大可堆叠数量-->
        <QuantityPerPack RefDes="QTY0102" qualifier="QTY0101:52">Test QuantityPerPack</QuantityPerPack>
        <!--每个包装的数量-->
        <MeasureUnitQualifier RefDes="QTY0103">EA</MeasureUnitQualifier>
        <!--测量单位：每个-->
      </QuantityDetail>
      <PackageIdentification>
        <!--PCILoop1-->
        <!--PCI-->
        <MarkingInstructionsCode RefDes="PCI01">17</MarkingInstructionsCode>
        <!--17：卖方说明-->
        <ShippingMarksDescription RefDes="PCI0201">Test ShippingMarksDescription</ShippingMarksDescription>
        <!--卖方运输说明-->
        <MarkingTypeCode RefDes="PCI0401">G</MarkingTypeCode>
        <!--标记类型编码，可填写：G/M/S，G:混拖;M:整托;S:散箱-->
        <CodeListResponsibleAgencyCode RefDes="PCI0403">5</CodeListResponsibleAgencyCode>
        <!--5:ISO国际标准化组织-->
        <Reference>
          <!--RFF-->
          <OuterpackagingUnitIdentification RefDes="RFF0102" qualifier="RFF0101:ACI">Test OuterpackagingUnitIdentification</OuterpackagingUnitIdentification>
          <!--外包装ID，使用GTL 或 SSCC18 标签-->
        </Reference>
        <ProductionManufactureDateInfo qualifier="DTM01/DTM0101:94">
          <!--DTM-->
          <ProductionManufactureDate RefDes="DTM0102">Test DateOrTimeOrPeriod</ProductionManufactureDate>
          <!--生产日期-->
          <DateTimePeriodFormatQualifier RefDes="DTM0103">102</DateTimePeriodFormatQualifier>
          <!--日期格式-->
        </ProductionManufactureDateInfo>
        <ValueList qualifier="GIR01:7">
          <!--GIRLoop1-->
          <!--GIR-->
          <LevelNumber RefDes="GIR0201" qualifier="GIR02/GIR0202:AM">1</LevelNumber>
          <!--可填入1/2, 1表示最小包装，2表示非最小包装-->
        </ValueList>
        <MarkingLabelNumber qualifier="GIN01:ML">
          <!--GINLoop1-->
          <!--GIN-->
          <IdentityNumber RefDes="GIN0201">Test IdentityNumber</IdentityNumber>
          <!--标签号-->
        </MarkingLabelNumber>
        <KanbanCardIdentifier qualifier="GIN01:AL">
          <!--GINLoop1-->
          <!--GIN-->
          <IdentityNumber RefDes="GIN0201">Test IdentityNumber</IdentityNumber>
          <!--看板卡号-->
        </KanbanCardIdentifier>
      </PackageIdentification>
    </PackageInformation>
    <Item>
      <!--LINLoop1-->
      <!--LIN-->
      <LineItemNumber RefDes="LIN01">Test LineItemNumber</LineItemNumber>
      <!--物料行号-->
      <BuyerItemNumber RefDes="LIN0301" qualifier="LIN0302:IN">Test BuyerItemNumber</BuyerItemNumber>
      <!--买方物料号-->
      <AdditionalProductIdentification>
        <!--PIA-->
        <ProductIdFunctionCode RefDes="PIA01">1</ProductIdFunctionCode>
        <!--补充产品ID限定符-->
        <ItemNumberIdentification RefDes="PIA02">
          <SupplierArticleNumber RefDes="PIA0201" qualifier="PIA0202:SA">Test SupplierArticleNumber</SupplierArticleNumber>
          <!--供应商货号-->
        </ItemNumberIdentification>
        <ItemNumberIdentification2 RefDes="PIA03">
          <EngineeringChangeLevel RefDes="PIA0301" qualifier="PIA0302:EC">Test EngineeringChangeLevel</EngineeringChangeLevel>
          <!--工程修改级别-->
        </ItemNumberIdentification2>
        <ItemNumberIdentification3 RefDes="PIA04">
          <BatchNumber RefDes="PIA0401" qualifier="PIA0402:NB">Test BatchNumber</BatchNumber>
          <!--批号-->
        </ItemNumberIdentification3>
        <ItemNumberIdentification4 RefDes="PIA05">
          <SoftwareRevisionNumber RefDes="PIA0501" qualifier="PIA0502:AG">Test SoftwareRevisionNumber</SoftwareRevisionNumber>
          <!--软件修正号-->
        </ItemNumberIdentification4>
        <ItemNumberIdentification5 RefDes="PIA06">
          <TechnicalPhase RefDes="PIA0601" qualifier="PIA0602:BT">Test TechnicalPhase</TechnicalPhase>
          <!--硬件修正号-->
        </ItemNumberIdentification5>
      </AdditionalProductIdentification>
      <QuantityDetail>
        <!--QTY-->
        <DespatchQuantity RefDes="QTY0102" qualifier="QTY0101:12">Test DespatchQuantity</DespatchQuantity>
        <!--发货数量-->
        <MeasureUnitQualifier RefDes="QTY0103">EA</MeasureUnitQualifier>
        <!--测量单位，每个-->
      </QuantityDetail>
      <AdditionalInformation>
        <!--ALI-->
        <CountryOfOriginIdentifier RefDes="ALI01">DE</CountryOfOriginIdentifier>
        <!--原产国-->
      </AdditionalInformation>
      <SerialNumber qualifier="GIN01:BN">
        <!--GIN-->
        <IdentityNumber RefDes="GIN0201">Test IdentityNumber</IdentityNumber>
        <!--序列号-->
      </SerialNumber>
      <ExpiryDateInfo qualifier="DTM01/DTM0101:36">
        <!--DTM-->
        <DateOrTimeOrPeriod RefDes="DTM0102">Test DateOrTimeOrPeriod</DateOrTimeOrPeriod>
        <!--限用日期-->
        <DateTimePeriodFormatQualifier RefDes="DTM0103">102</DateTimePeriodFormatQualifier>
      </ExpiryDateInfo>
      <ProductionManufactureDateInfo qualifier="DTM01/DTM0101:94">
        <!--DTM-->
        <DateOrTimeOrPeriod RefDes="DTM0102">Test DateOrTimeOrPeriod</DateOrTimeOrPeriod>
        <!--生产/制造日期-->
        <DateTimePeriodFormatQualifier RefDes="DTM0103">102</DateTimePeriodFormatQualifier>
      </ProductionManufactureDateInfo>
      <ManufacturerOfGoodsInfo qualifier="NAD01:MF">
        <!--NAD-->
        <PartyId RefDes="NAD0201">Test PartyId</PartyId>
        <!--货物制造商ID-->
      </ManufacturerOfGoodsInfo>
<Reference>
<!--RFFLoop3-->
<!--RFF-->
    <PurchaseOrderNumber RefDes="RFF0102" qualifier="RFF0101:ON">Test PurchaseOrderNumber</PurchaseOrderNumber>
    <!--订单编号-->
    <LineNumber RefDes="RFF0103">Test LineNumber</LineNumber>
    <!--物料行号-->
</Reference>
<Reference>
    <InvoiceNumber RefDes="RFF0102" qualifier="RFF0101:IV">Test InvoiceNumber</InvoiceNumber>
     <!--发票号-->
</Reference>
<!--RFF-->
<Reference>
    <DeliveryScheduleNumber RefDes="RFF0102" qualifier="RFF0101:AAN">Test DeliveryScheduleNumber</DeliveryScheduleNumber>
    <!--交付计划编号-->
</Reference>
<Reference>
    <EventReferenceNumber RefDes="RFF0102" qualifier="RFF0101:AIV">Test EventReferenceNumber</EventReferenceNumber>
    <!--事件参考号-->
 </Reference>      
<PlaceOrPortOfDischarge qualifier="LOC01:11">
        <!--LOCLoop2-->
        <!--LOC-->
        <LocationIdentification RefDes="LOC02">
          <LocationID RefDes="LOC0201">Test LocationID</LocationID>
          <!--卸货地ID-->
        </LocationIdentification>
      </PlaceOrPortOfDischarge>
      <Warehouse qualifier="LOC01:18">
        <!--LOCLoop2-->
        <!--LOC-->
        <LocationIdentification RefDes="LOC02">
          <LocationID RefDes="LOC0201">Test LocationID</LocationID>
          <!--仓库位置ID-->
        </LocationIdentification>
      </Warehouse>
      <AdditionalInternalDestination qualifier="LOC01:159">
        <!--LOCLoop2-->
        <!--LOC-->
        <LocationIdentification RefDes="LOC02">
          <LocationID RefDes="LOC0201">Test LocationID</LocationID>
          <!--额外的内部目的地ID-->
        </LocationIdentification>
      </AdditionalInternalDestination>
    </Item>
    <Level>
      <!--CPSLoop2-->
      <!--CPS-->
      <PackagingLevelCode RefDes="CPS03">2</PackagingLevelCode>
      <!--包装水平：中层-->
      <PackageInformation>
        <!--PACLoop1-->
        <!--PAC-->
        <PackageNumber RefDes="PAC01">123456</PackageNumber>
        <!--包装号-->
        <PackageTypeIdentification RefDes="PAC04">
          <ItemDescriptionTypeCode RefDes="PAC0401">F</ItemDescriptionTypeCode>
          <!--自由格式限定符-->
          <TypeOfPackages RefDes="PAC0402">Test TypeOfPackages</TypeOfPackages>
          <!--包装类型-->
          <ItemNumberTypeCode RefDes="PAC0403">IN</ItemNumberTypeCode>
          <!--买方物料号限定符-->
          <TypeOfPackages RefDes="PAC0404">Test TypeOfPackages</TypeOfPackages>
          <!--包装类型-->
          <ItemNumberTypeCode2 RefDes="PAC0405">SA</ItemNumberTypeCode2>
          <!--供应商产品编号-->
        </PackageTypeIdentification>
        <PackageMeasurement qualifier="MEA01:AAY">
          <!--MEA-->
          <MeasurementDimentionCode RefDes="MEA0201">G</MeasurementDimentionCode>
          <!--测量类型编码，可填写：G/AAL/LN/WD/HT，G:毛重，AAL:净重；LN:长度；WD:宽度；HT：宽度-->
          <UnitOfMeasurement RefDes="MEA0301">KGM</UnitOfMeasurement>
          <!--测量单位，可填写：KGM/CMT，KGM:千克；CMT:厘米-->
          <MeasurementValue RefDes="MEA0302">Test MeasurementValue</MeasurementValue>
          <!--测量值-->
        </PackageMeasurement>
        <QuantityDetail>
          <!--QTY-->
          <MaximumStackability RefDes="QTY0102" qualifier="QTY0101:171">Test MaximumStackability</MaximumStackability>
          <!--最大堆积量-->
          <NumberofPackagesInHandlingUnit RefDes="QTY0102" qualifier="QTY0101:189">Test NumberofPackagesInHandlingUnit</NumberofPackagesInHandlingUnit>
        </QuantityDetail>
        <!--处理单元中的包裹数量-->
        <PackageIdentification>
          <!--PCILoop1-->
          <!--PCI-->
          <MarkingInstructionsCode RefDes="PCI01">17</MarkingInstructionsCode>
          <!--17：卖方说明-->
          <ShippingMarksDescription RefDes="PCI0201">Test ShippingMarksDescription</ShippingMarksDescription>
          <!--卖方运输说明-->
          <MarkingTypeCode RefDes="PCI0401">G</MarkingTypeCode>
           <!--标记类型编码，可填写：G/M，G:混拖;M:整托-->
          <CodeListResponsibleAgencyCode RefDes="PCI0403">5</CodeListResponsibleAgencyCode>
          <!--5:ISO国际标准化组织-->
          <MarkingLabelNumber qualifier="GIN01:ML">
            <!--GINLoop1-->
            <!--GIN-->
            <IdentityNumber RefDes="GIN0201">Test IdentityNumber</IdentityNumber>
            <!--标签号-->
          </MarkingLabelNumber>
          <SerialShippingContainerCode qualifier="GIN01:AW">
            <!--GINLoop1-->
            <!--GIN-->
            <IdentityNumber RefDes="GIN0201">Test IdentityNumber</IdentityNumber>
            <!--外包装中包含的包件的ID-->
          </SerialShippingContainerCode>
        </PackageIdentification>
      </PackageInformation>
    </Level>
  </Level>
</EDI_DESADV>

2.通过知行之桥EDI系统，将上述示例XML文件进行格式转换后，得到的博世BOSCH发货通知 DESADV 报文示例如下：

UNA:+.?*'
UNB+UNOC:3+0123456789+BOSCH EDI-TEAM+221009:1422+000000019'
UNH+1+DESADV:D:07A:UN:EAN008'
- 1 = 消息参考号
- DESADV= 报文类型

BGM+351:::KANBAN+Test MessageNumber+9'
- 351= 发货通知限定符
- KANBAN= 与DELJIT相关的发货通知
- Test MessageNumber = 发货编号
- 9 = 原始文件

DTM+137:Test DateOrTimeOrPeriod:102'
- 137= 文件日期限定符
- Test DateOrTimeOrPeriod = 文件日期
- 102 = 日期格式编码

DTM+132:Test DateOrTimeOrPeriod:102'
- 132 = 预计运输抵达日期限定符
- Test DateOrTimeOrPeriod = 预计运输抵达日期
- 102 = 日期格式编码

DTM+10:Test DateOrTimeOrPeriod:102'
- 10 = 指定的运输日期限定符
- Test DateOrTimeOrPeriod = 指定的运输日期
- 102 = 日期格式编码

MEA+AAX+AAD+KGM:Test MeasurementValue'
- AAX = 寄售测量限定符
- AAD = 托运总重量限定符
- KGM = 千克
- Test MeasurementValue = 测量值

RFF+AAS:Test TransportContractDocumentIdentifier'
- AAS = 运输合同文件限定符
- Test TransportContractDocumentIdentifie = 运输合同文件ID

RFF+AVU:Test UniqueGoodsShipmentIdentifier'
- AVU = 独特的货物运输限定符
- Test UniqueGoodsShipmentIdentifier = 独特的货物运输ID

RFF+AHI:Test TransportContractReferenceNumber'
- AHI = 运输合同参考号限定符
- Test TransportContractReferenceNumber = 运输合同参考号

NAD+BY+Test PartyId::91++Test PartyName:Test PartyName2+Test StreetAndNumberOrPostOfficeBox+Test CityName+Test NameCode+Test PostCodeIdentification+DE'
- BY = 买方限定符
- Test PartyId = 买方ID
- 91 = 由卖方指定
- Test PartyName = 买方名称
- Test PartyName2 = 买方名称2
- Test StreetAndNumberOrPostOfficeBox = 买方街道
- Test CityName = 买方城市名
- Test NameCode = 买方城市详细信息
- Test PostCodeIdentification = 买方邮编
- DE =买方国家ID

CTA+IC+Test Identification:Test Name'
- IC = 买方联系信息限定符
- Test Identification = 买方联系ID
- Test Name =买方联系姓名

COM+Test CommunicationAddressIdentifier:TE'
- Test CommunicationAddressIdentifier = 买方联系地址ID
- TE = 电话

NAD+SE+Test PartyId::92++Test PartyName:Test PartyName2+Test StreetAndNumberOrPostOfficeBox+Test CityName+Test NameCode+Test PostCodeIdentification+DE'
- SE = 卖方限定符
- Test PartyId = 卖方ID
- 92 = 由买方指定
- Test PartyName = 卖方名称
- Test PartyName2 = 卖方名称2
- Test StreetAndNumberOrPostOfficeBox = 卖方街道
- Test CityName = 卖方城市名
- Test NameCode= 卖方国家或地区细分
- Test PostCodeIdentification = 卖方邮编
- DE = 卖方国家代码

CTA+IC+Test Identification:Test Name'
- IC= 卖方联系信息限定符
- Test Identification = 卖方联系ID
- Test Name = 卖方联系姓名

COM+Test CommunicationAddressIdentifier:TE'
- Test CommunicationAddressIdentifier = 卖方联系信息ID
- TE = 电话

NAD+SU+Test PartyId::92++Test PartyName:Test PartyName2+Test StreetAndNumberOrPostOfficeBox+Test CityName+Test NameCode+Test PostCodeIdentification+DE'
- SU = 供应商限定符
- Test PartyId = 供应商ID
- 92 = 由买方指定
- Test PartyName = 供应商名称
- Test PartyName2 = 供应商名称2
- Test StreetAndNumberOrPostOfficeBox = 供应商街道
- Test CityName = 供应商城市名
- Test NameCode= 供应商国家或地区细分
- Test PostCodeIdentification = 供应商邮编
- DE = 供应商国家代码

CTA+IC+Test Identification:Test Name'
- IC= 供应商联系信息限定符
- Test Identification = 供应商联系ID
- Test Name = 供应商联系姓名

COM+Test CommunicationAddressIdentifier:TE'
- Test CommunicationAddressIdentifier = 供应商联系信息ID
- TE = 电话

NAD+ST+Test PartyId::92++Test PartyName:Test PartyName2+Test StreetAndNumberOrPostOfficeBox+Test CityName+Test NameCode+Test PostCodeIdentification+DE'
- ST = 收货方限定符
- Test PartyId = 收货方ID
- 92 = 由买方指定
- Test PartyName = 收货方名称
- Test PartyName2 = 收货方名称2
- Test StreetAndNumberOrPostOfficeBox = 收货方街道
- Test CityName = 收货方城市名
- Test NameCode= 收货方国家或地区细分
- Test PostCodeIdentification = 收货方邮编
- DE = 收货方国家代码

LOC+11+Test LocationID'
- Test LocationID = 卸货点地址ID

CTA+IC+Test Identification:Test Name'
- IC= 收货方联系信息限定符
- Test Identification = 收货方联系ID
- Test Name = 收货方联系姓名

COM+Test CommunicationAddressIdentifier:TE'
- Test CommunicationAddressIdentifier = 收货方联系信息ID
- TE = 电话

NAD+SF+Test PartyId::92++Test PartyName:Test PartyName2+Test StreetAndNumberOrPostOfficeBox+Test CityName+Test NameCode+Test PostCodeIdentification+DE'
- SF = 发货限定符
- Test PartyId = 发货ID
- 92 = 由买方指定
- Test PartyName = 发货名称
- Test PartyName2 = 发货名称2
- Test StreetAndNumberOrPostOfficeBox = 发货街道
- Test CityName = 发货城市名
- Test NameCode= 发货国家或地区细分
- Test PostCodeIdentification = 发货邮编
- DE = 发货国家代码

CTA+IC+Test Identification:Test Name'
- IC= 发货方联系信息限定符
- Test Identification = 发货方联系ID
- Test Name = 发货方联系姓名

COM+Test CommunicationAddressIdentifier:TE'
- Test CommunicationAddressIdentifier = 发货方联系信息ID
- TE = 电话

NAD+FW+Test PartyId++Test PartyName:Test PartyName2+Test StreetAndNumberOrPostOfficeBox+Test CityName+Test NameCode+Test PostCodeIdentification+DE'
- FW= 货运转运商限定符
- Test PartyId = 货运转运商ID
- 92 = 由货运转运商指定
- Test PartyName = 货运转运商名称
- Test PartyName2 = 货运转运商名称2
- Test StreetAndNumberOrPostOfficeBox = 货运转运商街道
- Test CityName = 货运转运商城市名
- Test NameCode= 货运转运商国家或地区细分
- Test PostCodeIdentification = 货运转运商邮编
- DE = 货运转运商国家代码

CTA+IC+Test Identification:Test Name'
- IC= 货运转运商联系信息限定符
- Test Identification = 货运转运商联系ID
- Test Name = 货运转运商联系姓名

COM+Test CommunicationAddressIdentifier:TE'
- Test CommunicationAddressIdentifier = 货运转运商联系信息ID
- TE = 电话

EQD+TE+Test EquipmentId'
- TE= 拖车
- Test EquipmentId = 装运ID

CPS+1++1'
- 1= 包装水平限定符
- 1 = 包装水平，内包装

PAC+123456+++F:Test TypeOfPackages:IN:Test TypeOfPackages:SA'
- 123456 = 包装编号
- F = 包装类型编码，F：自由格式
- Test TypeOfPackages = 买方包装类型编码
- IN = 物料类型编码，IN：买方物料编号
- Test TypeOfPackages = 供应商包装类型编码
- SA = 供应商货号编码

MEA+AAY+G+KGM:Test MeasurementValue'
- AAY = 测量限定符
- G = 毛重
- KGM = 千克
- Test MeasurementValue = 测量值

QTY+171:Test MaximumStackability:EA'
- 171 = 买方包装类型编码
- Test MaximumStackability = 最大可堆叠数量
- EA = 测量单位：每个

PCI+17+Test ShippingMarksDescription++G::5'
- 17 = 卖方说明限定符
- Test ShippingMarksDescription = 卖方运输说明
- G = 标记类型编码
- 5 = ISO国际标准化组织

RFF+ACI:Test OuterpackagingUnitIdentification'
- ACI= 外包装限定符
- Test OuterpackagingUnitIdentification = 外包装ID

DTM+94:Test DateOrTimeOrPeriod:102'
- 94 = 生产日期限定符
- Test DateOrTimeOrPeriod= 生产日期
- 102 = 日期格式

GIR+7+1:AM'
- 7= 类型标识符
- 1 = 最小包装
- AM = 水平编号限定符

GIN+ML+Test IdentityNumber'
- ML = 标签号限定符
- Test IdentityNumber = 标签号

GIN+AL+Test IdentityNumber'
- AL = 看板卡号限定符
- Test IdentityNumber = 看板卡号

LIN+Test LineItemNumber++Test BuyerItemNumber:IN'
- Test LineItemNumber = 物料行号
- Test BuyerItemNumber = 买方物料号
- IN = 买方物料号限定符

PIA+1+Test SupplierArticleNumber:SA+Test EngineeringChangeLevel:EC+Test BatchNumber:NB+Test SoftwareRevisionNumber:AG+Test TechnicalPhase:BT'
- 1 = 看板卡号限定符
- Test SupplierArticleNumber = 供应商货号
- SA = 供应商货号限定符
- Test EngineeringChangeLevel= 工程修改级别限定符
- EC = 工程修改级别
- Test BatchNumber= 批号
- NB = 批号限定符
- Test SoftwareRevisionNumber = 软件修正号
- AG = 软件修正号限定符
- Test TechnicalPhase = 硬件修正号
- BT = 硬件修正号限定符


QTY+12:Test DespatchQuantity:EA'
- 12 = 发货数量限定符
- Test DespatchQuantity = 发货数量
- EA = 测量单位，每个

ALI+DE'
- DE = 原产国

GIN+BN+Test IdentityNumber'
- BN = 序列号限定符
- Test IdentityNumber = 序列号

DTM+36:Test DateOrTimeOrPeriod:102'
- 36 = 限用日期限定符
- Test DateOrTimeOrPeriod = 限用日期
- 102= 日期格式限定符

DTM+94:Test DateOrTimeOrPeriod:102'
- 94 = 生产/制造日期限定符
- Test DateOrTimeOrPeriod = 生产/制造日期
- 102= 日期格式限定符

NAD+MF+Test PartyId'
- MF = 货物制造商限定符
- Test PartyId = 货物制造商ID

RFF+ON:Test PurchaseOrderNumber:Test LineNumber'
- ON = 订单编号限定符
- Test PurchaseOrderNumber = 订单编号
- Test LineNumber = 物料行号

RFF+IV:Test InvoiceNumber'
- IV = 发票号限定符
- Test InvoiceNumber = 发票号

RFF+AAN:Test DeliveryScheduleNumber'
- AAN = 交付计划编号限定符
- Test DeliveryScheduleNumber = 交付计划编号

RFF+AIV:Test EventReferenceNumber'
- AIV: = 事件参考号限定符
- Test EventReferenceNumber = 事件参考号

LOC+11+Test LocationID'
- 11 = 卸货地限定符
- Test LocationID = 卸货地ID

LOC+18+Test LocationID'
- 18 = 仓库位置限定符
- Test LocationID = 仓库位置ID

LOC+159+Test LocationID'
- 159 = 额外的内部目的地限定符
- Test LocationID = 额外的内部目的地ID

CPS+2++2'
- 2 = 包装水平限定符
- 2 = 包装水平：中层

PAC+123456+++F:Test TypeOfPackages:IN:Test TypeOfPackages:SA'
- 123456 = 包装号
- F = 自由格式限定符
- Test TypeOfPackages = 包装类型
- IN = 买方物料号限定符
- Test TypeOfPackages = 包装类型
- SA = 供应商产品编号

MEA+AAY+G+KGM:Test MeasurementValue'
- AAY= 包装测量限定符
- G = 毛重
- KGM = 千克
- Test MeasurementValue = 测量值

QTY+171:Test MaximumStackability'
- 171= 最大堆积量限定符
- Test MaximumStackability= 最大堆积量

PCI+17+Test ShippingMarksDescription++G::5'
- 17 = 卖方说明限定符
- Test ShippingMarksDescription = 卖方运输说明
- G = 混拖
- 5 = ISO国际标准化组织

GIN+ML+Test IdentityNumber'
- ML = 标签号
- Test IdentityNumber = 标签号

GIN+AW+Test IdentityNumber'
- AW = 外包装中包含的包件限定符
- Test IdentityNumber = 外包装中包含的包件的ID

UNT+57+1'
UNZ+1+000000019'

工作流示例

通过上述的讲解想必大家已经了解了 BOSCH DESADV发货通知在知行之桥 EDI 系统中的转换结果了，以下是上述工作流示例，您可以下载知行之桥EDI系统，导入【示例工作流】以及【BOSCH_DESADV_Test】，进行实战操作。

下载博世 BOSCH DESADV 工作流以及测试文件

在知行之桥 EDI 系统中导入上述工作流以及测试文件。

①先点击右上角的工作区齿轮图标，选择创建工作区，命名为BOSCH_Test。

②然后选择导入工作区，选择BOSCH_Test.arcflow。

③点开BOSCH_XMLMap_DESADV 端口，点击上方输入，在更多里点击上传文件，上传 DESADV_TEST.xml。

④点开BOSCH_XMLToEDIFACT端口，点击上方输出，点击 D07A_DESADV_Test_000000020.edi即可下载文件，看到转换后的结果。

更多 EDI 信息，请参阅: EDI 是什么？

阅读原文

知行EDI

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
打赏
0
评论
博世BOSCH EDI DESADV发货通知详解

利用知行之桥EDI系统可以将XML文件转换为符合国际标准的 EDIFACT文件，再通过EDI系统发送给BOSCH即可，企业可以从自己的业务系统中生成如下XML文件，或者将自己的业务数据填进如下的XML文件。通过上述的讲解想必大家已经了解了 BOSCH DESADV发货通知在知行之桥 EDI 系统中的转换结果了，以下是上述工作流示例，您可以下载知行之桥EDI系统，导入【示例工作流】以及【BOSCH_DESADV_Test】，进行实战操作。在知行之桥 EDI 系统中导入上述工作流以及测试文件。
复制链接

扫一扫