NUCLEO-F410RB 长按按键3秒复位代码

#include "mbed.h"

DigitalOut led(LED1);
PwmOut pwm(PA_7);

InterruptIn button1(USER_BUTTON);
volatile bool button1_pressed = false; 

int pressTheButton();
void LED(int);


// ISR handling button pressed event
void button1_onpressed_cb(void)
{
    if (button1.read()==0) {
        wait_ms(20);
			if(button1.read()==0)
			{
				button1_pressed=true;
			}
			else button1_pressed=false;
    }
		else button1_pressed=false;
}

void button1_high(void)
{
	button1_pressed=false;
}

int main(void)
{
    //button1.mode(PullUp); // Activate pull-up
    button1.fall(&button1_onpressed_cb); // Attach ISR to handle button press event
	button1.rise(&button1_high);
	int status=0;
	printf("System setup OK.\r\n");
	while(1)
	{
		status=pressTheButton();			
		LED(status);
	}
}


int pressTheButton()		//control the status
{
	int i=0;
	int status=0;
	
	if (button1_pressed) { // 1st press
			while(button1_pressed);
			while(!button1_pressed) 
			{
				wait_ms(1);
				i++;
				if(i>500) { status = 1; return status;}
			}
			i=0;
			if (button1_pressed) { // 2nd press
				while(button1_pressed);
				while(!button1_pressed)
				{
					wait_ms(1);
					i++;
					if(i>500) { status=2; return status;}
				}
				if(button1_pressed) { // 3rd press
					status = 3;
				}
				else status=2; 
			}
			else status=1;
	}
	else status = 0;
	return status;
}
void LED(int status)
{
	float i = 0.5;		//dc
	bool flag = true;
	float dc = 1.0;
	int delay = 1000;//change freq of LED blinking
	int pressTime=0;
	pwm.period_ms(10);
	pwm.write(0);
	led.write(PA_7);
	if(status==1)
	{
		while(1)
		{
			pwm.write(i);
			if(flag){
					i+=0.01;
					if(i>=1.0) flag=false;
				}
				else {
					i-=0.01;
					if(i<=0) flag=true;
				}
				wait_ms(20);
				if(button1_pressed) 
				{
					pressTime++;
					if(pressTime>=150) { led=0; while(button1_pressed); return; }
				}
				else pressTime=0; 
		}
	}
	else if(status == 2 || status == 3)
	{
		if(status == 2) delay=1000;
		else delay=200;
		while(1)
		{
			pwm.write(dc);
			if(dc == 1.0) dc = 0;
			else dc = 1.0;
			wait_ms(delay);
			if(button1_pressed)
			{
				if(status==2) 
				{
					pressTime++;
					if(pressTime>=3) { led=0; while(button1_pressed); return;}
				}
				else
				{
					pressTime++;
					if(pressTime>=15) { led=0; while(button1_pressed); return;}
				}
			}
			else pressTime=0;
		}
	}
	else 
	{
		led=0;
		return;
	}
}