问题“No EPCS registers found: tried looking at address”的解决办法

问题“No EPCS registers found: tried looking at address”的解决办法

使用Nios II Flash Programmer时提示”No EPCS registers found: tried looking at address“，找不到EPCS，在使用Qsys构建系统时将Nios处理器下的jtag_debug_module_reset与epcs_fash模块的reset引脚连接后完成：生成-编译-下载等工作后正常。

Title:

Why does the Nios II Processor Flash controller not find the EPCS registers and fail when trying to program the flash?

Description:

The JTAG debug module in the Nios® II Processor asserts the reset output to clear registers in the flash controller during the controller detection phase.  Detection can fail if the registers are not seen to be in their default state.
Ensure the jtag_debug_module_reset output from the Nios II Processor is connected to the EPCS Serial Flash Controller reset input.