STM32利用定时器1控制LED闪烁

配置LED灯

//PC13
void LED_Init(void)
{
	GPIO_InitTypeDef GPIO_InitStructure;
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE);
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_Init(GPIOC, &GPIO_InitStructure);
}

配置定时器1

void TIM2_Init(void)
{
	NVIC_InitTypeDef NVIC_InitStructure;
	TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
	//使能定时器1的时钟
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1,ENABLE);
	

	TIM_TimeBaseStructure.TIM_Period = (10000-1);//ARR
	TIM_TimeBaseStructure.TIM_Prescaler = (7200-1);//PSC 	
	TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
	TIM_TimeBaseInit(TIM1, & TIM_TimeBaseStructure);

	//使能定时器1的中断
	TIM_ITConfig(TIM1,TIM_IT_Update,ENABLE);
	
	//配置定时器1的中断优先等级
	NVIC_InitStructure.NVIC_IRQChannel = TIM1_IRQn;
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
	NVIC_Init(&NVIC_InitStructure);

	//使能定时器1
	TIM_Cmd(TIM1,ENABLE);
	
}

主函数

int main(void)
{
	NVIC_Configuration();
	LED_Init();
	TIM2_Init();
	
	while(1)
	{
	
	}
}

void TIM1_UP_IRQHandler(void)
{
	TIM_ClearFlag(TIM1,TIM_FLAG_Update);
	LED = ~LED;
}