linux开发 | uboot环境变量及命令使用

setenv bootcmd 'movi read kernel 30008000; movi read rootfs 30B00000 300000; bootm 30008000 30B00000'

setenv  bootargs  'init=/linuxrc  console=ttySAC2,115200  root=nfs  nfsroot=192.168.1.104:/opt/v210_rootfs  ip=192.168.1.188'

setenv bootcmd 'movi read kernel 30008000; bootm 30008000 '

setenv bootcmd 'tftp 30008000 zImage;bootm 30008000'

setenv bootargs 'root=/dev/nfs nfsroot=192.168.1.104:/opt/v210_rootfs ip=192.168.1.188:192.168.1.104:192.168.1.253:255.255.255.0::eth0:off  init=/linuxrc console=ttySAC2,115200' 

SD卡启动或者nand启动

x210 # printenv
baudrate=115200
bootargs=console=ttySAC2,115200 root=/dev/mmcblk0p2 rw init=/linuxrc rootfstype=ext3
bootcmd=movi read kernel 30008000; movi read rootfs 30B00000 300000; bootm 30008000 30B00000
ethact=dm9000
ethaddr=00:40:5c:26:0a:5b
mtdpart=80000 400000 3000000
serverip=192.168.1.102
bootdelay=2
gatewayip=192.168.1.253
ipaddr=192.168.1.188
netmask=255.255.255.0

uboot中设置从nand启动参数：

setenv bootargs 'console=ttySAC2,115200 root=/dev/mmcblk0p2 rw init=/linuxrc rootfstype=ext3'

setenv bootcmd 'movi read kernel 30008000; movi read rootfs 30B00000 300000; bootm 30008000 30B00000'

uboot保存环境变量

x210 # saveenv
Saving Environment to SMDK bootable device...
done

tftp下载内核及nfs挂载根文件系统

x210 # printenv
baudrate=115200
ethact=dm9000
ethaddr=00:40:5c:26:0a:5b
mtdpart=80000 400000 3000000
bootdelay=2
filesize=60000
fileaddr=C0008000
gatewayip=192.168.1.253
netmask=255.255.255.0
ipaddr=192.168.1.188
serverip=192.168.1.104
bootcmd=tftp 30008000 zImage;bootm 30008000
bootargs=init=/linuxrc  console=ttySAC2,115200  root=nfs  nfsroot=192.168.1.104:/opt/v210_rootfs  ip=192.168.1.188

Environment size: 379/16380 bytes

s5pv210开发与学习：LinuxQT系统启动LOG

uboot tftp服务启动内核