目录
一、MHA概述
1、什么是MHA
MHA（MasterHigh Availability）是一套优秀的MySQL高可用环境下故障切换和主从复制的软件。
MHA 的出现就是解决MySQL 单点的问题。
MySQL故障切换过程中，MHA能做到0-30秒内自动完成故障切换操作。
MHA能在故障切换的过程中最大程度上保证数据的一致性，以达到真正意义上的高可用。
主服务器会保存最新的二进制文件，
2、MHA 的组成
①MHA Node（数据节点）
MHA Node 运行在每台 MySQL 服务器上。
②MHA Manager（管理节点）
MHA Manager 可以单独部署在一台独立的机器上，管理多个 master-slave 集群；也可以部署在一台 slave 节点上。
MHA Manager 会定时探测集群中的 master 节点。当 master 出现故障时，它可以自动将最新数据的 slave 提升为新的 master， 然后将所有其他的 slave 重新指向新的 master。整个故障转移过程对应用程序完全透明。
先装node在装manager；node和node之间通过manager去管理；
3、MHA 的特点
自动故障切换过程中，MHA试图从宕机的主服务器上保存二进制日志，最大程度的保证数据不丢失
使用半同步复制，可以大大降低数据丢失的风险，如果只有一个slave已经收到了最新的二进制日志，MHA可以将最新的二进制日志应用于其他所有的slave服务器上，因此可以保证所有节点的数据一致性
目前MHA支持一主多从架构，最少三台服务，即一主两从
4、MHA的工作原理
1、从宕机的 Master 保存二进制日志事件（binlog event）；
2、识别含有最新更新的 Slave；
3、应用差异的中继日志（relay log）到其他 Slave；
4、应用从 Master 保存的二进制日志事件；
5、提升一个 Slave 为新的 Master；
6、使其他的 Slave 连接新的 Master 进行复制；
数据流向： 数据先经过master通过manger管理数据分配，然后当主服务器挂了之后，需要去匹配从服务器最接近主服务器内容的顶上去，通过vip去进行地址漂移，此时从服务器变成了主服务器，接下来就是主从复制+读写分离原理。
MHA使用半同步复制
二、搭建MHA环境
准备三台MySQL做一主两从，一台做manager
主
systemctl stop firewalld
setenforce 0
systemctl status firewalld.service
hostnamectl set-hostname master
su
vim /etc/my.cnf
[mysqld]
server-id = 1
log_bin = master-bin
log-slave-updates = true
systemctl restart mysqld
ln -s /usr/local/mysql/bin/mysql /usr/sbin/
ln -s /usr/local/mysql/bin/mysqlbinlog /usr/sbin/
mysql -uroot -p123456；
grant replication slave on *.* to 'myslave'@'192.168.111.%' identified by '123456';
grant all privileges on *.* to 'mha'@'192.168.111.%' identified by 'manager';
grant all privileges on *.* to 'mha'@'mysql1' identified by 'manager';
grant all privileges on *.* to 'mha'@'mysql2' identified by 'manager';
grant all privileges on *.* to 'mha'@'mysql3' identified by 'manager';
flush privileges;
show master status;
在 Master 主库插入条数据，测试是否同步
create database test_db;
use test_db;
create table test(id int);
insert into test(id) values (1);
安装 MHA 依赖的环境，首先安装 epel 源
yum install epel-release --nogpgcheck -y
yum install -y perl-DBD-MySQL \
perl-Config-Tiny \
perl-Log-Dispatch \
perl-Parallel-ForkManager \
perl-ExtUtils-CBuilder \
perl-ExtUtils-MakeMaker \
perl-CPAN
安装 MHA 软件包，先在所有服务器上必须先安装 node 组件
cd /opt
tar zxvf mha4mysql-node-0.57.tar.gz
cd mha4mysql-node-0.57
perl Makefile.PL
make && make install
在 mysql1 上配置到数据库节点 mysql2 和 mysql3 的无密码认证
ssh-keygen -t rsa
ssh-copy-id 192.168.111.75
ssh-copy-id 192.168.111.78
第一次配置需要在 Master 节点上手动开启虚拟IP
/sbin/ifconfig ens33:1 192.168.111.200/24
从
systemctl stop firewalld
systemctl disable firewalld
setenforce 0
vim /etc/my.cnf
server-id = 2
log_bin = master-bin
relay-log = relay-log-bin
relay-log-index = slave-relay-bin.index
systemctl restart mysqld
ln -s /usr/local/mysql/bin/mysql /usr/sbin/
ln -s /usr/local/mysql/bin/mysqlbinlog /usr/sbin/
所有数据库节点进行 mysql 授权
mysql -uroot -p123456；
grant replication slave on *.* to 'myslave'@'192.168.10.%' identified by '123456';
grant all privileges on *.* to 'mha'@'192.168.10.%' identified by 'manager';
grant all privileges on *.* to 'mha'@'mysql1' identified by 'manager';
grant all privileges on *.* to 'mha'@'mysql2' identified by 'manager';
grant all privileges on *.* to 'mha'@'mysql3' identified by 'manager';
flush privileges;
在 Slave1、Slave2 节点执行同步操作
CHANGE master to master_host='192.168.111.72',master_user='myslave',master_password='123456',master_log_file='master-bin.000001',master_log_pos=734;
start slave;
两个从库必须设置为只读模式
set global read_only=1;
安装 MHA 依赖的环境，首先安装 epel 源
yum install epel-release --nogpgcheck -y
yum install -y perl-DBD-MySQL \
perl-Config-Tiny \
perl-Log-Dispatch \
perl-Parallel-ForkManager \
perl-ExtUtils-CBuilder \
perl-ExtUtils-MakeMaker \
perl-CPAN
安装 node 组件
cd /opt
tar zxvf mha4mysql-node-0.57.tar.gz
cd mha4mysql-node-0.57
perl Makefile.PL
make && make install
配置到数据库节点无密码认证
ssh-keygen -t rsa
ssh-copy-id 192.168.1
manager
systemctl stop firewalld
systemctl disable firewalld
setenforce 0
安装 MHA 依赖的环境，首先安装 epel 源
yum install epel-release --nogpgcheck -y
yum install -y perl-DBD-MySQL \
perl-Config-Tiny \
perl-Log-Dispatch \
perl-Parallel-ForkManager \
perl-ExtUtils-CBuilder \
perl-ExtUtils-MakeMaker \
perl-CPAN
安装 node 组件
cd /opt
tar zxvf mha4mysql-node-0.57.tar.gz
cd mha4mysql-node-0.57
perl Makefile.PL
make && make install
安装 manager 组件
cd /opt
tar zxvf mha4mysql-manager-0.57.tar.gz
cd mha4mysql-manager-0.57
perl Makefile.PL
make && make install
在 manager 节点上配置到所有数据库节点的无密码认证
ssh-keygen -t rsa
ssh-copy-id
cp -rp /opt/mha4mysql-manager-0.57/samples/scripts /usr/local/bin
ll /usr/local/bin/scripts/
cp /usr/local/bin/scripts/master_ip_failover /usr/local/bin
vim /usr/local/bin/master_ip_failover
dy installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@192.168.111.75's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh '192.168.111.75'"
and check to make sure that only the key(s) you wanted were added.
[root@manager mha4mysql-manager-0.57]# ssh-copy-id 192.168.111.78
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host '192.168.111.78 (192.168.111.78)' can't be established.
ECDSA key fingerprint is SHA256:c6BYknrovGpGKJtBFROMjCa6EU/tUjR+ttgsWXmDVUA.
ECDSA key fingerprint is MD5:9d:df:69:f7:d8:5b:72:5e:12:13:02:d3:60:82:fd:85.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@192.168.111.78's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh '192.168.111.78'"
and check to make sure that only the key(s) you wanted were added.
[root@manager mha4mysql-manager-0.57]# cp -rp /opt/mha4mysql-manager-0.57/samples/scripts /usr/local/bin
[root@manager mha4mysql-manager-0.57]# ll /usr/local/bin/scripts/
总用量 32
-rwxr-xr-x. 1 mysql mysql 3648 5月 31 2015 master_ip_failover
-rwxr-xr-x. 1 mysql mysql 9870 5月 31 2015 master_ip_online_change
-rwxr-xr-x. 1 mysql mysql 11867 5月 31 2015 power_manager
-rwxr-xr-x. 1 mysql mysql 1360 5月 31 2015 send_report
[root@manager mha4mysql-manager-0.57]# cp /usr/local/bin/scripts/master_ip_failover /usr/local/bin
[root@manager mha4mysql-manager-0.57]# vim /usr/local/bin/master_ip_failover
[root@manager mha4mysql-manager-0.57]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.111.71 netmask 255.255.255.0 broadcast 192.168.111.255
inet6 fe80::eb98:89fc:bd9a:c81c prefixlen 64 scopeid 0x20<link>
inet6 fe80::e686:3db:f2ad:954b prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:82:83:96 txqueuelen 1000 (Ethernet)
RX packets 863608 bytes 1150503472 (1.0 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 355925 bytes 33035802 (31.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 96 bytes 8248 (8.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 96 bytes 8248 (8.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:23:4c:d4 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@manager mha4mysql-manager-0.57]# vim /usr/local/bin/master_ip_failover
[root@manager mha4mysql-manager-0.57]# mkdir /etc/masterha
[root@manager mha4mysql-manager-0.57]# cp /opt/mha4mysql-manager-0.57/samples/conf/app1.cnf /etc/masterha
[root@manager mha4mysql-manager-0.57]# vim /etc/masterha/app1.cnf
[root@manager mha4mysql-manager-0.57]# vim /etc/masterha/app1.cnf
[root@manager mha4mysql-manager-0.57]# masterha_check_ssh -conf=/etc/masterha/app1.cnf
Tue Jul 25 16:17:54 2023 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipp
Tue Jul 25 16:17:54 2023 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Parameter name mger_log is invalid!
at /usr/local/share/perl5/MHA/SSHCheck.pm line 148.
[root@manager mha4mysql-manager-0.57]# systemctl stop firewalld
[root@manager mha4mysql-manager-0.57]# systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
Active: inactive (dead) since 日 2023-07-23 20:25:45 CST; 1 day 19h ago
Docs: man:firewalld(1)
Main PID: 823 (code=exited, status=0/SUCCESS)
7月 23 20:24:16 localhost.localdomain systemd[1]: Starting firewalld - dynamic firewall daemon...
7月 23 20:24:16 localhost.localdomain systemd[1]: Started firewalld - dynamic firewall daemon.
7月 23 20:24:17 localhost.localdomain firewalld[823]: WARNING: ICMP type 'beyond-scope' is not support...
7月 23 20:24:17 localhost.localdomain firewalld[823]: WARNING: beyond-scope: INVALID_ICMPTYPE: No supp...
7月 23 20:24:17 localhost.localdomain firewalld[823]: WARNING: ICMP type 'failed-policy' is not suppor...
7月 23 20:24:17 localhost.localdomain firewalld[823]: WARNING: failed-policy: INVALID_ICMPTYPE: No sup...
7月 23 20:24:17 localhost.localdomain firewalld[823]: WARNING: ICMP type 'reject-route' is not support...
7月 23 20:24:17 localhost.localdomain firewalld[823]: WARNING: reject-route: INVALID_ICMPTYPE: No supp...
7月 23 20:25:44 localhost.localdomain systemd[1]: Stopping firewalld - dynamic firewall daemon...
7月 23 20:25:45 localhost.localdomain systemd[1]: Stopped firewalld - dynamic firewall daemon.
Hint: Some lines were ellipsized, use -l to show in full.
[root@manager mha4mysql-manager-0.57]# masterha_check_ssh -conf=/etc/masterha/app1.cnf
Tue Jul 25 16:18:42 2023 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipp
Tue Jul 25 16:18:42 2023 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Parameter name mger_log is invalid!
at /usr/local/share/perl5/MHA/SSHCheck.pm line 148.
[root@manager mha4mysql-manager-0.57]# vim /etc/masterha/app1.cnf
[root@manager mha4mysql-manager-0.57]# cd ..
[root@manager opt]# masterha_check_ssh -conf=/etc/masterha/app1.cnf
Tue Jul 25 16:21:07 2023 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipp
Tue Jul 25 16:21:07 2023 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Parameter name mger_log is invalid!
at /usr/local/share/perl5/MHA/SSHCheck.pm line 148.
[root@manager opt]# cd /usr/local/share/perl5/MHA/
[root@manager MHA]# ls
BinlogHeaderParser.pm BinlogPosFindManager.pm ManagerAdmin.pm MasterMonitor.pm Server.pm
BinlogManager.pm Config.pm ManagerAdminWrapper.pm MasterRotate.pm SlaveUtil.pm
BinlogPosFinderElp.pm DBHelper.pm ManagerConst.pm NodeConst.pm SSHCheck.pm
BinlogPosFinder.pm FileStatus.pm ManagerUtil.pm NodeUtil.pm
BinlogPosFinderXid.pm HealthCheck.pm MasterFailover.pm ServerManager.pm
[root@manager MHA]# cat SSHCheck.pm
#!/usr/bin/env perl
# Copyright (C) 2011 DeNA Co.,Ltd.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
package MHA::SSHCheck;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use Getopt::Long qw(:config pass_through);
use Carp qw(croak);
use Time::HiRes qw( sleep );
use Log::Dispatch;
use Log::Dispatch::Screen;
use Parallel::ForkManager;
use MHA::Config;
use MHA::ManagerConst;
use MHA::ManagerUtil;
$| = 1;
my $g_global_config_file = $MHA::ManagerConst::DEFAULT_GLOBAL_CONF;
my $g_config_file;
sub do_ssh_connection_check {
my $servers_ref = shift;
my $log = shift;
my $log_level = shift;
my $workdir = shift;
my @servers = @$servers_ref;
$log->info("Starting SSH connection tests..");
my $failed = 0;
my $pm = new Parallel::ForkManager( $#servers + 1 );
$pm->run_on_start(
sub {
my ( $pid, $target ) = @_;
}
);
$pm->run_on_finish(
sub {
my ( $pid, $exit_code, $target ) = @_;
return if ( $target->{skip_init_ssh_check} );
my $local_file =
"$workdir/$target->{ssh_host}_$target->{ssh_port}_ssh_check.log";
if ($exit_code) {
$failed = 1;
if ( -f $local_file ) {
$log->error( "\n" . `cat $local_file` );
}
}
else {
if ( -f $local_file ) {
$log->debug( "\n" . `cat $local_file` );
}
}
unlink $local_file;
}
);
foreach my $src (@servers) {
if ( $pm->start($src) ) {
# By default, sshd normally accepts only 10 concurrent authentication requests.
# If we have lots of alive servers, we might reach this limitation so
# shifting child process invocation time a bit to avoid this problem.
sleep 0.5;
next;
}
my ( $file, $pplog );
eval {
$SIG{INT} = $SIG{HUP} = $SIG{QUIT} = $SIG{TERM} = "DEFAULT";
$pm->finish(0) if ( $src->{skip_init_ssh_check} );
$file = "$workdir/$src->{ssh_host}_$src->{ssh_port}_ssh_check.log";
unlink $file;
$pplog = Log::Dispatch->new( callbacks => $MHA::ManagerConst::log_fmt );
$pplog->add(
Log::Dispatch::File->new(
name => 'file',
filename => $file,
min_level => $log_level,
callbacks => $MHA::ManagerConst::add_timestamp,
mode => 'append'
)
);
foreach my $dst (@servers) {
next if ( $dst->{skip_init_ssh_check} );
next if ( $src->{id} eq $dst->{id} );
$pplog->debug(
" Connecting via SSH from $src->{ssh_user}\@$src->{ssh_host}($src->{ssh_ip}:$src->{ssh_port}) to $dst->{sser}\@$dst->{ssh_host}($dst->{ssh_ip}:$dst->{ssh_port}).."
);
my $command =
"ssh $MHA::ManagerConst::SSH_OPT_CHECK -p $src->{ssh_port} $src->{ssh_user}\@$src->{ssh_ip} \"ssh $MHA::MerConst::SSH_OPT_CHECK -p $dst->{ssh_port} $dst->{ssh_user}\@$dst->{ssh_ip} exit 0\"";
my ( $high, $low ) = MHA::ManagerUtil::exec_system( $command, $file );
if ( $high != 0 || $low != 0 ) {
$pplog->error(
"SSH connection from $src->{ssh_user}\@$src->{ssh_host}($src->{ssh_ip}:$src->{ssh_port}) to $dst->{ssh_us@$dst->{ssh_host}($dst->{ssh_ip}:$dst->{ssh_port}) failed!"
);
$pm->finish(1);
}
$pplog->debug(" ok.");
}
$pm->finish(0);
};
if ($@) {
$pplog->error($@) if ($pplog);
undef $@;
$pm->finish(1);
}
}
$pm->wait_all_children;
croak "SSH Configuration Check Failed!\n" if ($failed);
$log->info("All SSH connection tests passed successfully.");
}
sub main {
@ARGV = @_;
GetOptions(
'global_conf=s' => \$g_global_config_file,
'conf=s' => \$g_config_file,
);
unless ($g_config_file) {
print "--conf=<server_config_file> must be set.\n";
return 1;
}
my $log = MHA::ManagerUtil::init_log();
my $conf = new MHA::Config(
logger => $log,
globalfile => $g_global_config_file,
file => $g_config_file
);
my ( $sc_ref, undef ) = $conf->read_config();
my @servers_config = @$sc_ref;
$log = MHA::ManagerUtil::init_log( undef, "debug" );
return do_ssh_connection_check( \@servers_config, $log, "debug", "/tmp" );
}
1;
[root@manager MHA]# cat -n SSHCheck.pm
1 #!/usr/bin/env perl
2
3 # Copyright (C) 2011 DeNA Co.,Ltd.
4 #
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
9 #
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
14 #
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc.,
18 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
19
20 package MHA::SSHCheck;
21
22 use strict;
23 use warnings FATAL => 'all';
24
25 use English qw(-no_match_vars);
26 use Getopt::Long qw(:config pass_through);
27 use Carp qw(croak);
28 use Time::HiRes qw( sleep );
29 use Log::Dispatch;
30 use Log::Dispatch::Screen;
31 use Parallel::ForkManager;
32 use MHA::Config;
33 use MHA::ManagerConst;
34 use MHA::ManagerUtil;
35 $| = 1;
36 my $g_global_config_file = $MHA::ManagerConst::DEFAULT_GLOBAL_CONF;
37 my $g_config_file;
38
39 sub do_ssh_connection_check {
40 my $servers_ref = shift;
41 my $log = shift;
42 my $log_level = shift;
43 my $workdir = shift;
44 my @servers = @$servers_ref;
45 $log->info("Starting SSH connection tests..");
46 my $failed = 0;
47 my $pm = new Parallel::ForkManager( $#servers + 1 );
48
49 $pm->run_on_start(
50 sub {
51 my ( $pid, $target ) = @_;
52 }
53 );
54
55 $pm->run_on_finish(
56 sub {
57 my ( $pid, $exit_code, $target ) = @_;
58 return if ( $target->{skip_init_ssh_check} );
59 my $local_file =
60 "$workdir/$target->{ssh_host}_$target->{ssh_port}_ssh_check.log";
61 if ($exit_code) {
62 $failed = 1;
63 if ( -f $local_file ) {
64 $log->error( "\n" . `cat $local_file` );
65 }
66 }
67 else {
68 if ( -f $local_file ) {
69 $log->debug( "\n" . `cat $local_file` );
70 }
71 }
72 unlink $local_file;
73 }
74 );
75
76 foreach my $src (@servers) {
77 if ( $pm->start($src) ) {
78
79 # By default, sshd normally accepts only 10 concurrent authentication requests.
80 # If we have lots of alive servers, we might reach this limitation so
81 # shifting child process invocation time a bit to avoid this problem.
82 sleep 0.5;
83 next;
84 }
85 my ( $file, $pplog );
86 eval {
87 $SIG{INT} = $SIG{HUP} = $SIG{QUIT} = $SIG{TERM} = "DEFAULT";
88 $pm->finish(0) if ( $src->{skip_init_ssh_check} );
89 $file = "$workdir/$src->{ssh_host}_$src->{ssh_port}_ssh_check.log";
90 unlink $file;
91 $pplog = Log::Dispatch->new( callbacks => $MHA::ManagerConst::log_fmt );
92 $pplog->add(
93 Log::Dispatch::File->new(
94 name => 'file',
95 filename => $file,
96 min_level => $log_level,
97 callbacks => $MHA::ManagerConst::add_timestamp,
98 mode => 'append'
99 )
100 );
101 foreach my $dst (@servers) {
102 next if ( $dst->{skip_init_ssh_check} );
103 next if ( $src->{id} eq $dst->{id} );
104 $pplog->debug(
105 " Connecting via SSH from $src->{ssh_user}\@$src->{ssh_host}($src->{ssh_ip}:$src->{ssh_port}) to ->{ssh_user}\@$dst->{ssh_host}($dst->{ssh_ip}:$dst->{ssh_port}).."
106 );
107 my $command =
108 "ssh $MHA::ManagerConst::SSH_OPT_CHECK -p $src->{ssh_port} $src->{ssh_user}\@$src->{ssh_ip} \"sshA::ManagerConst::SSH_OPT_CHECK -p $dst->{ssh_port} $dst->{ssh_user}\@$dst->{ssh_ip} exit 0\"";
109 my ( $high, $low ) = MHA::ManagerUtil::exec_system( $command, $file );
110 if ( $high != 0 || $low != 0 ) {
111 $pplog->error(
112 "SSH connection from $src->{ssh_user}\@$src->{ssh_host}($src->{ssh_ip}:$src->{ssh_port}) to $dst-h_user}\@$dst->{ssh_host}($dst->{ssh_ip}:$dst->{ssh_port}) failed!"
113 );
114 $pm->finish(1);
115 }
116 $pplog->debug(" ok.");
117 }
118 $pm->finish(0);
119 };
120 if ($@) {
121 $pplog->error($@) if ($pplog);
122 undef $@;
123 $pm->finish(1);
124 }
125 }
126 $pm->wait_all_children;
127 croak "SSH Configuration Check Failed!\n" if ($failed);
128
129 $log->info("All SSH connection tests passed successfully.");
130 }
131
132 sub main {
133 @ARGV = @_;
134 GetOptions(
135 'global_conf=s' => \$g_global_config_file,
136 'conf=s' => \$g_config_file,
137 );
138 unless ($g_config_file) {
139 print "--conf=<server_config_file> must be set.\n";
140 return 1;
141 }
142 my $log = MHA::ManagerUtil::init_log();
143 my $conf = new MHA::Config(
144 logger => $log,
145 globalfile => $g_global_config_file,
146 file => $g_config_file
147 );
148 my ( $sc_ref, undef ) = $conf->read_config();
149 my @servers_config = @$sc_ref;
150 $log = MHA::ManagerUtil::init_log( undef, "debug" );
151 return do_ssh_connection_check( \@servers_config, $log, "debug", "/tmp" );
152 }
mkdir /etc/masterha
cp /opt/mha4mysql-manager-0.57/samples/conf/app1.cnf /etc/masterha
vim /etc/masterha/app1.cnf
[server default]
manager_log=/var/log/masterha/app1/manager.log
manager_workdir=/var/log/masterha/app1
master_binlog_dir=/usr/local/mysql/data
master_ip_failover_script=/usr/local/bin/master_ip_failover
master_ip_online_change_script=/usr/local/bin/master_ip_online_change
password=manager
ping_interval=1
remote_workdir=/tmp
repl_password=123456
repl_user=myslave
secondary_check_script=/usr/local/bin/masterha_secondary_check -s 192.168.111.75 -s 192.168.10.78
shutdown_script=""
ssh_user=root
user=mha
[server1]
hostname=192.168.111.72
port=3306
[server2]
candidate_master=1
check_repl_delay=0
hostname=192.168.111.75
port=3306
[server3]
hostname=192.168.111.78
port=3306
masterha_check_ssh -conf=/etc/masterha/app1.cnf
masterha_check_repl -conf=/etc/masterha/app1.cnf
2436
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
