手把手从0到1教你做STM32+FreeRTOS智能家居--第2篇之OLED显示屏

已于 2024-06-11 11:57:31 修改
阅读量545 收藏 5
点赞数 3
文章标签： stm32 智能家居 嵌入式硬件
于 2024-05-19 16:06:13 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/MOS_JBET/article/details/139039986
版权

一、硬件设计

本篇文章用到的是一个中景园的4线IIC的OLED显示屏，SCL时钟线连接stm32的PC0，SDA数据线连接stm32的PC1。对IIC通讯不太熟悉的小伙伴可以在CSDN搜索自行学习，再来看本篇文章的应用部分。作者水平有限，就不误人子弟了。

二、软件设计

软件部分使用STM32通过IO口模拟IIC的方式来控制OLED显示屏，我们先需要配置IO口的输出模式。按照下图进行配置，然后点击生成代码。为了避免总线信号的混乱，要求各设备连接到总线的输出端时必须是漏极开路（OD）输出或集电极开路（OC）输出。

以下是oled.c文件的代码，其中我们重点要注意的是模拟IIC相关的代码，可以对照着IIC协议的时序图来看以下代码。

//	 
//本程序只供学习使用，未经作者许可，不得用于其它任何用途
//中景园电子
//店铺地址：http://shop73023976.taobao.com/?spm=2013.1.0.0.M4PqC2
//
//  文 件 名   : main.c
//  版 本 号   : v2.0
//  作    者   : Evk123
//  生成日期   : 2014-0101
//  最近修改   : 
//  功能描述   : 0.69寸OLED 接口演示例程(STM32F103ZE系列IIC)
//              说明: 
//              ----------------------------------------------------------------
//              GND   电源地
//              VCC   接5V或3.3v电源
//              SCL   接PD6（SCL）
//              SDA   接PD7（SDA）            
//              ----------------------------------------------------------------
//Copyright(C) 中景园电子2014/3/16
//All rights reserved
//?
#include "oled.h"
#include "stdlib.h"
#include "oledfont.h"

   

/**********************************************
//IIC Start
开始信号：SCL高电平时，SDA由高电平到低电平跳变，开始传送数据。
**********************************************/
void OLED_IIC_Start()
{
	OLED_SCLK_Set();
	OLED_SDIN_Set();
	OLED_SDIN_Clr();
	OLED_SCLK_Clr();
}

/**********************************************
//IIC Stop
结束信号：SCL高电平时，SDA由低电平到高电平跳变，结束传送数据。
**********************************************/
void OLED_IIC_Stop()
{
	OLED_SCLK_Set() ;
//	OLED_SCLK_Clr();
	OLED_SDIN_Clr();
	OLED_SDIN_Set();
	
}


void OLED_IIC_Wait_Ack()
{
	OLED_SCLK_Set() ;
	OLED_SCLK_Clr();
}
/**********************************************
// IIC Write byte
**********************************************/

void OLED_Write_IIC_Byte(unsigned char IIC_Byte)
{
	unsigned char i;
	unsigned char m,da;
	da=IIC_Byte;
	OLED_SCLK_Clr();
	for(i=0;i<8;i++)		
	{
		m=da;
		//	OLED_SCLK_Clr();
		m=m&0x80;
		if(m==0x80)
		{OLED_SDIN_Set();}
		else OLED_SDIN_Clr();
		da=da<<1;
		OLED_SCLK_Set();
		OLED_SCLK_Clr();
	}
}

/**********************************************
// IIC Write Command
**********************************************/
void OLED_Write_IIC_Command(unsigned char IIC_Command)
{
		OLED_IIC_Start();
		OLED_Write_IIC_Byte(0x78);            //Slave address,SA0=0
		OLED_IIC_Wait_Ack();	
		OLED_Write_IIC_Byte(0x00);			//write command
		OLED_IIC_Wait_Ack();	
		OLED_Write_IIC_Byte(IIC_Command); 
		OLED_IIC_Wait_Ack();	
		OLED_IIC_Stop();
}
/**********************************************
// IIC Write Data
**********************************************/
void OLED_Write_IIC_Data(unsigned char IIC_Data)
{
		OLED_IIC_Start();
		OLED_Write_IIC_Byte(0x78);			//D/C#=0; R/W#=0
		OLED_IIC_Wait_Ack();	
		OLED_Write_IIC_Byte(0x40);			//write data
		OLED_IIC_Wait_Ack();	
		OLED_Write_IIC_Byte(IIC_Data);
		OLED_IIC_Wait_Ack();	
		OLED_IIC_Stop();
}

void OLED_WR_Byte(unsigned dat,unsigned cmd)
{
	if(cmd)
	{
   OLED_Write_IIC_Data(dat);
	}
	else
	{
   OLED_Write_IIC_Command(dat);
	}
}


/********************************************
// fill_Picture
********************************************/
void fill_picture(unsigned char fill_Data)
{
	unsigned char m,n;
	for(m=0;m<8;m++)
	{
		OLED_WR_Byte(0xb0+m,0);		//page0-page1
		OLED_WR_Byte(0x00,0);		//low column start address
		OLED_WR_Byte(0x10,0);		//high column start address
		for(n=0;n<128;n++)
			{
				OLED_WR_Byte(fill_Data,1);
			}
	}
}


/***********************Delay****************************************/
void Delay_50ms(unsigned int Del_50ms)
{
	unsigned int m;
	for(;Del_50ms>0;Del_50ms--)
		for(m=6245;m>0;m--);
}

void Delay_1ms(unsigned int Del_1ms)
{
	unsigned char j;
	while(Del_1ms--)
	{	
		for(j=0;j<123;j++);
	}
}

//坐标设置

void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 	OLED_WR_Byte(0xb0+y,OLED_CMD);
	OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
	OLED_WR_Byte((x&0x0f),OLED_CMD); 
}   	  
//开启OLED显示    
void OLED_Display_On(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ON
	OLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
}
//关闭OLED显示     
void OLED_Display_Off(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFF
	OLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
}		   			 
//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!	  
void OLED_Clear(void)  
{  
	u8 i,n;		    
	for(i=0;i<8;i++)  
	{  
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   
		for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); 
	} //更新显示
}
void OLED_On(void)  
{  
	u8 i,n;		    
	for(i=0;i<8;i++)  
	{  
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   
		for(n=0;n<128;n++)OLED_WR_Byte(1,OLED_DATA); 
	} //更新显示
}
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示				 
//size:选择字体 16/12 
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size)
{      	
	unsigned char c=0,i=0;	
		c=chr-' ';//得到偏移后的值			
		if(x>Max_Column-1){x=0;y=y+2;}
		if(Char_Size ==16)
			{
			OLED_Set_Pos(x,y);	
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);
			OLED_Set_Pos(x,y+1);
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);
			}
			else {	
				OLED_Set_Pos(x,y);
				for(i=0;i<6;i++)
				OLED_WR_Byte(F6x8[c][i],OLED_DATA);
				
			}
}
//m^n函数
u32 oled_pow(u8 m,u8 n)
{
	u32 result=1;	 
	while(n--)result*=m;    
	return result;
}				  
//显示2个数字
//x,y :起点坐标	 
//len :数字的位数
//size:字体大小
//mode:模式	0,填充模式;1,叠加模式
//num:数值(0~4294967295);	 		  
void OLED_ShowNumber(u8 x,u8 y,u32 num,u8 len,u8 size2)
{         	
	u8 t,temp;
	u8 enshow=0;						   
	for(t=0;t<len;t++)
	{
		temp=(num/oled_pow(10,len-t-1))%10;
		if(enshow==0&&t<(len-1))
		{
			if(temp==0)
			{
				OLED_ShowChar(x+(size2/2)*t,y,' ',size2);
				continue;
			}else enshow=1; 
		 	 
		}
	 	OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2); 
	}
} 

//显示一个字符号串
void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 Char_Size)
{
	while (*chr!='\0')
	{		OLED_ShowChar(x,y,*chr,Char_Size);
			x+=8;
		if(x>120){x=0;y+=2;}
			chr++;
	}
}
//显示汉字
void OLED_ShowCHinese(u8 x,u8 y,u8 no)
{      			    
	u8 t,adder=0;
	OLED_Set_Pos(x,y);	
    for(t=0;t<16;t++)
		{
				OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);
				adder+=1;
     }	
		OLED_Set_Pos(x,y+1);	
    for(t=0;t<16;t++)
			{	
				OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);
				adder+=1;
      }					
}
/***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{ 	
 unsigned int j=0;
 unsigned char x,y;
  
  if(y1%8==0) y=y1/8;      
  else y=y1/8+1;
	for(y=y0;y<y1;y++)
	{
		OLED_Set_Pos(x0,y);
    for(x=x0;x<x1;x++)
	    {      
	    	OLED_WR_Byte(BMP[j++],OLED_DATA);	    	
	    }
	}
} 
void OLED_Float(unsigned char Y,unsigned char X,double real,unsigned char N) 
{
   unsigned char   i_Count=1;
   unsigned char   n[12]={0};
   long   j=1;  
   int    real_int=0;
   double decimal=0;
   unsigned int   real_decimal=0;
   if(real<0)
	 {
		 real_int=(int)(-real);
	 }
	 else
	 {
		 real_int=(int)real;
   }
	 decimal=real-real_int;
   real_decimal=decimal*1e4;
   while(real_int/10/j!=0)
   {
      j=j*10;i_Count++;  
   } 
   n[0]=(real_int/10000)%10; 
   n[1]=(real_int/1000)%10;
   n[2]=(real_int/100)%10;
   n[3]=(real_int/10)%10;
   n[4]=(real_int/1)%10; 
   n[5]='.';
   n[6]=(real_decimal/1000)%10;
   n[7]=(real_decimal/100)%10;
   n[8]=(real_decimal/10)%10;
   n[9]=real_decimal%10;
   n[6+N]='\0'; 
   for(j=0;j<10;j++) n[j]=n[j]+16+32;
	 if(real<0) 
	 {		 
		 i_Count+=1;
		 n[5-i_Count]='-';
	 }
   n[5]='.';
   n[6+N]='\0';   
   OLED_ShowString(X,Y,&n[5-i_Count],12); 
}

 void OLED_Float2(unsigned char Y,unsigned char X,double real,unsigned char N1,unsigned char N2) 
{
   unsigned char   i_Count=1;
   unsigned char   n[12]={0};
   long   j=1;  
   unsigned int   real_int=0;
   double decimal=0;
   unsigned int   real_decimal=0;
   X=X*8;
   real_int=(int)real;
   //Dis_Num(2,0,real_int,5);
   decimal=real-real_int;
   real_decimal=decimal*1e4;
   //Dis_Num(2,6,real_decimal,4);
   while(real_int/10/j!=0)
   {
      j=j*10;i_Count++;  
   } 
   n[0]=(real_int/10000)%10; 
   n[1]=(real_int/1000)%10;
   n[2]=(real_int/100)%10;
   n[3]=(real_int/10)%10;
 
   n[5]='.';
   n[6]=(real_decimal/1000)%10;
   n[7]=(real_decimal/100)%10;
   n[8]=(real_decimal/10)%10;
   n[9]=real_decimal%10;
   n[6+N2]='\0'; 
   for(j=0;j<10;j++) n[j]=n[j]+16+32;
   n[5]='.';
   n[6+N2]='\0';   
   OLED_ShowString(X,Y,&n[5-N1],12); 
}

  void OLED_Num2(unsigned char x,unsigned char y, int number)
{
        unsigned char shi,ge;
	      int num =number;
	if(num<0)
	{ 
		num=-num;
		shi=num%100/10;
    ge=num%10;
	  OLED_fuhao_write(x,y,13); 
    OLED_Num_write(x+1,y,shi);
    OLED_Num_write(x+2,y,ge); 
  } 
  else
	{

		shi=num%100/10;
    ge=num%10;
		OLED_fuhao_write(x,y,11);
    OLED_Num_write(x+1,y,shi);
    OLED_Num_write(x+2,y,ge); 
  }
        
}

void OLED_Num3(unsigned char x,unsigned char y,int number)
{
  unsigned char ge,shi,bai;
	int num =number;
	if(num<0)
	{
		    num=-num;
		    OLED_fuhao_write(x,y,13); //显示-号
        ge = num %10;
        shi = num/10%10;
        bai = num/100;
        OLED_Num_write(x+3,y,ge);
        OLED_Num_write(x+2,y,shi);
        OLED_Num_write(x+1,y,bai);
	}
	else
	{
       OLED_fuhao_write(x,y,11);
        ge = num %10;
        shi = num/10 %10;
        bai = num/100;
        OLED_Num_write(x+3,y,ge);
        OLED_Num_write(x+2,y,shi);
        OLED_Num_write(x+1,y,bai);
  }
}

void OLED_Num4(unsigned char x,unsigned char y, int number)
{
	unsigned char qian,bai,shi,ge;
	int num =number;
	if(num<0)
	{
		num=-num;
	}
	qian=num/1000;
	bai=num%1000/100;
	shi=num%100/10;
	ge=num%10;

	OLED_Num_write(x,y,qian);
	OLED_Num_write(x+1,y,bai);
	OLED_Num_write(x+2,y,shi);
	OLED_Num_write(x+3,y,ge);
}

void OLED_Num_write(unsigned char x,unsigned char y,unsigned char asc) 
{
	int i=0;
	OLED_Set_Pos(x*6,y);
	for(i=0;i<6;i++)
	{
		 OLED_WR_Byte(F6x8[asc+16][i],OLED_DATA);         
	}
}	
void OLED_fuhao_write(unsigned char x,unsigned char y,unsigned char asc) 
{

	  int i=0;
    OLED_Set_Pos(x*6,y);
    for(i=0;i<6;i++)
    {
       OLED_WR_Byte(F6x8[asc][i],OLED_DATA);         
    }
 
}			

void OLED_Num5(unsigned char x,unsigned char y,unsigned int number)
{
        unsigned char wan,qian,bai,shi,ge;
        wan=number/10000;
	    	qian = number%10000/1000;
        bai=number%1000/100;
        shi=number%100/10;
        ge=number%10;
        OLED_Num_write(x,y,wan);
        OLED_Num_write(x+1,y,qian);
        OLED_Num_write(x+2,y,bai);
        OLED_Num_write(x+3,y,shi);
		    OLED_Num_write(x+4,y,ge);
}

//初始化SSD1306					    
void OLED_Init(void)
{
// 	GPIO_InitTypeDef  GPIO_InitStructure;
//	RCC_APB2PeriphClockCmd(OLED_SCL_GPIO_CLK|RCC_APB2Periph_AFIO, ENABLE);	
//	GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE); 
//	GPIO_InitStructure.GPIO_Pin = OLED_SCL_GPIO_PIN|OLED_SDA_GPIO_PIN;	 
// 	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; 		
//	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
// 	GPIO_Init(OLED_SCL_GPIO_PROT, &GPIO_InitStructure);	  
// 	GPIO_SetBits(OLED_SCL_GPIO_PROT,OLED_SCL_GPIO_PIN|OLED_SDA_GPIO_PIN);	
 
	HAL_Delay(100);
	OLED_WR_Byte(0xAE, OLED_CMD); //display off
	OLED_WR_Byte(0x20, OLED_CMD); //Set Memory Addressing Mode    
	OLED_WR_Byte(0x10, OLED_CMD); //00,Horizontal Addressing Mode;01,Vertical Addressing Mode;10,Page Addressing Mode (RESET);11,Invalid
	OLED_WR_Byte(0xb0, OLED_CMD); //Set Page Start Address for Page Addressing Mode,0-7
	OLED_WR_Byte(0xc8, OLED_CMD); //Set COM Output Scan Direction
	OLED_WR_Byte(0x00, OLED_CMD); //---set low column address
	OLED_WR_Byte(0x10, OLED_CMD); //---set high column address
	OLED_WR_Byte(0x40, OLED_CMD); //--set start line address
	OLED_WR_Byte(0x81, OLED_CMD); //--set contrast control register
	OLED_WR_Byte(0xff, OLED_CMD); //亮度调节 0x00~0xff
	OLED_WR_Byte(0xa1, OLED_CMD); //--set segment re-map 0 to 127
	OLED_WR_Byte(0xa6, OLED_CMD); //--set normal display
	OLED_WR_Byte(0xa8, OLED_CMD); //--set multiplex ratio(1 to 64)
	OLED_WR_Byte(0x3F, OLED_CMD); //
	OLED_WR_Byte(0xa4, OLED_CMD); //0xa4,Output follows RAM content;0xa5,Output ignores RAM content
	OLED_WR_Byte(0xd3, OLED_CMD); //-set display offset
	OLED_WR_Byte(0x00, OLED_CMD); //-not offset
	OLED_WR_Byte(0xd5, OLED_CMD); //--set display clock divide ratio/oscillator frequency
	OLED_WR_Byte(0xf0, OLED_CMD); //--set divide ratio
	OLED_WR_Byte(0xd9, OLED_CMD); //--set pre-charge period
	OLED_WR_Byte(0x22, OLED_CMD); //
	OLED_WR_Byte(0xda, OLED_CMD); //--set com pins hardware configuration
	OLED_WR_Byte(0x12, OLED_CMD);
	OLED_WR_Byte(0xdb, OLED_CMD); //--set vcomh
	OLED_WR_Byte(0x20, OLED_CMD); //0x20,0.77xVcc
	OLED_WR_Byte(0x8d, OLED_CMD); //--set DC-DC enable
	OLED_WR_Byte(0x14, OLED_CMD); //
	OLED_WR_Byte(0xaf, OLED_CMD); //--turn on oled panel
	OLED_Display_On();
	OLED_Clear();
}  

void OLED_Display_Init(void)
{
	OLED_Init();
	/*Line1 胖虎智能家居系统*/
	OLED_ShowCHinese(0,0,8);
	OLED_ShowCHinese(16,0,9);
	OLED_ShowCHinese(32,0,0);
	OLED_ShowCHinese(48,0,1);
	OLED_ShowCHinese(64,0,2);
	OLED_ShowCHinese(80,0,3);
	OLED_ShowCHinese(96,0,4);
	OLED_ShowCHinese(112,0,5);
}

 以下为oled.h文件，根据所用的引脚来修改IIC端口部分的宏定义。

#ifndef __OLED_H
#define __OLED_H	 


#include "main.h"

#define OLED_CMD  0	//写命令
#define OLED_DATA 1	//写数据

#define OLED_MODE 0
#define SIZE 8
#define XLevelL		0x00
#define XLevelH		0x10
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xFF 
#define X_WIDTH 	128
#define Y_WIDTH 	64	    						  
//-----------------OLED IIC端口定义----------------  					   

#define OLED_SCL_GPIO_PIN 		 	GPIO_PIN_0
#define OLED_SCL_GPIO_PROT		 	GPIOC

#define OLED_SDA_GPIO_PIN 		 	GPIO_PIN_1
#define OLED_SDA_GPIO_PROT		 	GPIOC

#define u32 uint32_t
//#define OLED_SCLK_Clr() GPIO_ResetBits(OLED_SCL_GPIO_PROT,OLED_SCL_GPIO_PIN)//SCL
//#define OLED_SCLK_Set() GPIO_SetBits(OLED_SCL_GPIO_PROT,OLED_SCL_GPIO_PIN)
//#define OLED_SDIN_Clr() GPIO_ResetBits(OLED_SDA_GPIO_PROT,OLED_SDA_GPIO_PIN)//SDA
//#define OLED_SDIN_Set() GPIO_SetBits(OLED_SDA_GPIO_PROT,OLED_SDA_GPIO_PIN)
#define OLED_SCLK_Clr() HAL_GPIO_WritePin(OLED_SCL_GPIO_PROT, OLED_SCL_GPIO_PIN, GPIO_PIN_RESET)
#define OLED_SCLK_Set() HAL_GPIO_WritePin(OLED_SCL_GPIO_PROT, OLED_SCL_GPIO_PIN, GPIO_PIN_SET)
#define OLED_SDIN_Clr() HAL_GPIO_WritePin(OLED_SDA_GPIO_PROT,OLED_SDA_GPIO_PIN,GPIO_PIN_RESET)//SDA
#define OLED_SDIN_Set() HAL_GPIO_WritePin(OLED_SDA_GPIO_PROT, OLED_SDA_GPIO_PIN, GPIO_PIN_SET) 

//OLED控制用函数
void OLED_Display_Init(void);
void OLED_WR_Byte(unsigned dat,unsigned cmd);  
void OLED_Display_On(void);
void OLED_Display_Off(void);	   							   		    
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(uint8_t x,uint8_t y,uint8_t t);
void OLED_Fill(uint8_t x1,uint8_t y1,uint8_t x2,uint8_t y2,uint8_t dot);
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size);
void OLED_ShowNumber(uint8_t x,uint8_t y,u32 num,uint8_t len,uint8_t size);
void OLED_ShowString(uint8_t x,uint8_t y, uint8_t *p,uint8_t Char_Size);	 
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no);
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);
void fill_picture(unsigned char fill_Data);
void Picture(void);
void OLED_IIC_Start(void);
void OLED_IIC_Stop(void);
void OLED_Write_IIC_Command(unsigned char IIC_Command);
void OLED_Write_IIC_Data(unsigned char IIC_Data);
void OLED_Write_IIC_Byte(unsigned char IIC_Byte);
void OLED_IIC_Wait_Ack(void);

void OLED_fuhao_write(unsigned char x,unsigned char y,unsigned char asc);
void OLED_Num_write(unsigned char x,unsigned char y,unsigned char asc) ;
void OLED_Float(unsigned char Y,unsigned char X,double real,unsigned char N);
void OLED_Float2(unsigned char Y,unsigned char X,double real,unsigned char N1,unsigned char N2);
void OLED_Num2(unsigned char x,unsigned char y, int number);
void OLED_Num3(unsigned char x,unsigned char y,int number); 
void OLED_Num4(unsigned char x,unsigned char y, int number);
void OLED_Num5(unsigned char x,unsigned char y,unsigned int number);

#endif

 OLEDFont.h 文件是用于存放我们对OLED取模所得到的数据。

#ifndef __OLEDFONT_H
#define __OLEDFONT_H 	   
//常用ASCII表
//偏移量32
//ASCII字符集
//偏移量32
//大小:12*6
/************************************6*8的点阵************************************/
const unsigned char F6x8[][6] =		
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

char Hzk[][32]={

{0x10,0x94,0x53,0x32,0x1E,0x32,0x52,0x10,0x00,0x7E,0x42,0x42,0x42,0x7E,0x00,0x00},
{0x00,0x00,0x00,0xFF,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0xFF,0x00,0x00,0x00,0x00},/*"智",0*/

{0x08,0xCC,0x4A,0x49,0x48,0x4A,0xCC,0x18,0x00,0x7F,0x88,0x88,0x84,0x82,0xE0,0x00},
{0x00,0xFF,0x12,0x12,0x52,0x92,0x7F,0x00,0x00,0x7E,0x88,0x88,0x84,0x82,0xE0,0x00},/*"能",1*/

{0x10,0x2C,0x24,0x24,0xA4,0xA4,0x65,0xA6,0x24,0x24,0x24,0x24,0xA4,0x34,0x0C,0x00},
{0x40,0x49,0x49,0x29,0x24,0x14,0x52,0x89,0x7F,0x04,0x0A,0x11,0x10,0x20,0x20,0x00},/*"家",2*/

{0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0xF2,0x92,0x92,0x92,0x9E,0x80,0x80,0x00},
{0x40,0x30,0x0F,0x00,0xFC,0x44,0x44,0x44,0x47,0x44,0x44,0x44,0xFC,0x00,0x00,0x00},/*"居",3*/

{0x00,0x00,0x22,0x32,0x2A,0xA6,0xA2,0x62,0x21,0x11,0x09,0x81,0x01,0x00,0x00,0x00},
{0x00,0x42,0x22,0x13,0x0B,0x42,0x82,0x7E,0x02,0x02,0x0A,0x12,0x23,0x46,0x00,0x00},/*"系",4*/

{0x20,0x30,0xAC,0x63,0x30,0x00,0x88,0xC8,0xA8,0x99,0x8E,0x88,0xA8,0xC8,0x88,0x00},
{0x22,0x67,0x22,0x12,0x12,0x80,0x40,0x30,0x0F,0x00,0x00,0x3F,0x40,0x40,0x71,0x00},/*"统",5*/

{0x10,0x10,0xD0,0xFF,0x90,0x14,0xE4,0xAF,0xA4,0xA4,0xA4,0xAF,0xE4,0x04,0x00,0x00},
{0x04,0x03,0x00,0xFF,0x00,0x89,0x4B,0x2A,0x1A,0x0E,0x1A,0x2A,0x4B,0x88,0x80,0x00},/*"模",6*/

{0x10,0x10,0x90,0x90,0x90,0x90,0x90,0x10,0x10,0xFF,0x10,0x10,0x11,0x16,0x10,0x00},
{0x00,0x20,0x60,0x20,0x3F,0x10,0x10,0x10,0x00,0x03,0x0C,0x10,0x20,0x40,0xF8,0x00},/*"式",7*/

{0x00,0x00,0xFE,0x22,0x22,0xFE,0x00,0x44,0x58,0x40,0xFF,0x40,0x50,0x4C,0x00,0x00},
{0x80,0x60,0x1F,0x42,0x82,0x7F,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x00},/*"胖",8*/

{0x00,0x00,0xF8,0x08,0x48,0x48,0x48,0xFF,0x4A,0x2A,0x2A,0x0A,0xCA,0x18,0x00,0x00},
{0x80,0x60,0x1F,0x80,0x40,0x20,0x1C,0x04,0x05,0x05,0x7D,0x81,0x81,0xE0,0x00,0x00},/*"虎",9*/

{0x40,0x42,0xCC,0x00,0x00,0x82,0x92,0x92,0xF2,0x9E,0x92,0x92,0xF2,0x82,0x80,0x00},
{0x00,0x00,0x7F,0x20,0x10,0x00,0xFC,0x44,0x44,0x44,0x44,0x44,0xFC,0x00,0x00,0x00},/*"语",10*/

{0x40,0x40,0x44,0x44,0x54,0x64,0x45,0x46,0x44,0x64,0x54,0x44,0x44,0x40,0x40,0x00},
{0x00,0x00,0x00,0xFF,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0xFF,0x00,0x00,0x00,0x00},/*"音",11*/

{0x00,0xFE,0x22,0x22,0x22,0xFE,0x00,0x00,0x10,0x10,0xFF,0x10,0x10,0xF0,0x00,0x00},
{0x20,0x3F,0x21,0x21,0x11,0x1F,0x90,0x40,0x20,0x18,0x47,0x80,0x40,0x3F,0x00,0x00},/*"助",12*/

{0x00,0x00,0x24,0x24,0x24,0x24,0x24,0xFC,0x22,0x22,0x22,0x23,0x22,0x00,0x00,0x00},
{0x02,0x02,0x02,0x02,0x02,0x42,0x82,0x7F,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00},/*"手",13*/

{0x00,0x00,0xE2,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xFE,0x00,0x00,0x00,0x00},
{0x00,0x00,0x3F,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x78,0x00,0x00},/*"已",14*/

{0xFC,0x04,0x04,0xFC,0x20,0x10,0xE8,0x27,0x24,0xE4,0x34,0x2C,0xE0,0x00,0x00,0x00},
{0x0F,0x04,0x04,0x0F,0x80,0x84,0x47,0x24,0x1C,0x07,0x1C,0x24,0x47,0x84,0x84,0x00},/*"唤",15*/

{0xF2,0x12,0xFE,0x12,0xFE,0x12,0xF2,0x00,0x00,0xBE,0x2A,0xEA,0x2A,0x3E,0x00,0x00},
{0xFF,0x4A,0x49,0x48,0x49,0x49,0xFF,0x00,0x42,0x49,0x49,0x7F,0x49,0x49,0x40,0x00},/*"醒",16*/

{0x00,0x80,0x60,0xF8,0x07,0x10,0x10,0x10,0xD0,0xFF,0xD0,0x10,0x10,0x10,0x10,0x00},
{0x01,0x00,0x00,0xFF,0x10,0x08,0x04,0x03,0x00,0xFF,0x00,0x03,0x04,0x08,0x10,0x00},/*"休",17*/

{0x00,0xFC,0x24,0x24,0x24,0xFC,0x00,0xFE,0x22,0x22,0xE2,0x22,0x22,0x3E,0x00,0x00},
{0x00,0x3F,0x11,0x11,0x11,0x3F,0x00,0xFF,0x41,0x21,0x07,0x19,0x21,0x41,0xF1,0x00},/*"眠",18*/

{0x00,0x00,0xF0,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0xF0,0x00,0x00,0x00},
{0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x0F,0x00,0x00,0x00},/*"中",19*/


};



#endif

以下为OLED的应用代码： OLED_Init(void) 用于配置OLED显示所用到的一系列寄存器，OLED_Display_Init()用于显示汉字到OLED屏，main函数中对OLED_Display_Init()进行调用，即可完成者两个操作。

//初始化SSD1306					    
void OLED_Init(void)
{
// 	GPIO_InitTypeDef  GPIO_InitStructure;
//	RCC_APB2PeriphClockCmd(OLED_SCL_GPIO_CLK|RCC_APB2Periph_AFIO, ENABLE);	
//	GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE); 
//	GPIO_InitStructure.GPIO_Pin = OLED_SCL_GPIO_PIN|OLED_SDA_GPIO_PIN;	 
// 	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; 		
//	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
// 	GPIO_Init(OLED_SCL_GPIO_PROT, &GPIO_InitStructure);	  
// 	GPIO_SetBits(OLED_SCL_GPIO_PROT,OLED_SCL_GPIO_PIN|OLED_SDA_GPIO_PIN);	
 
	HAL_Delay(100);
	OLED_WR_Byte(0xAE, OLED_CMD); //display off
	OLED_WR_Byte(0x20, OLED_CMD); //Set Memory Addressing Mode    
	OLED_WR_Byte(0x10, OLED_CMD); //00,Horizontal Addressing Mode;01,Vertical Addressing Mode;10,Page Addressing Mode (RESET);11,Invalid
	OLED_WR_Byte(0xb0, OLED_CMD); //Set Page Start Address for Page Addressing Mode,0-7
	OLED_WR_Byte(0xc8, OLED_CMD); //Set COM Output Scan Direction
	OLED_WR_Byte(0x00, OLED_CMD); //---set low column address
	OLED_WR_Byte(0x10, OLED_CMD); //---set high column address
	OLED_WR_Byte(0x40, OLED_CMD); //--set start line address
	OLED_WR_Byte(0x81, OLED_CMD); //--set contrast control register
	OLED_WR_Byte(0xff, OLED_CMD); //亮度调节 0x00~0xff
	OLED_WR_Byte(0xa1, OLED_CMD); //--set segment re-map 0 to 127
	OLED_WR_Byte(0xa6, OLED_CMD); //--set normal display
	OLED_WR_Byte(0xa8, OLED_CMD); //--set multiplex ratio(1 to 64)
	OLED_WR_Byte(0x3F, OLED_CMD); //
	OLED_WR_Byte(0xa4, OLED_CMD); //0xa4,Output follows RAM content;0xa5,Output ignores RAM content
	OLED_WR_Byte(0xd3, OLED_CMD); //-set display offset
	OLED_WR_Byte(0x00, OLED_CMD); //-not offset
	OLED_WR_Byte(0xd5, OLED_CMD); //--set display clock divide ratio/oscillator frequency
	OLED_WR_Byte(0xf0, OLED_CMD); //--set divide ratio
	OLED_WR_Byte(0xd9, OLED_CMD); //--set pre-charge period
	OLED_WR_Byte(0x22, OLED_CMD); //
	OLED_WR_Byte(0xda, OLED_CMD); //--set com pins hardware configuration
	OLED_WR_Byte(0x12, OLED_CMD);
	OLED_WR_Byte(0xdb, OLED_CMD); //--set vcomh
	OLED_WR_Byte(0x20, OLED_CMD); //0x20,0.77xVcc
	OLED_WR_Byte(0x8d, OLED_CMD); //--set DC-DC enable
	OLED_WR_Byte(0x14, OLED_CMD); //
	OLED_WR_Byte(0xaf, OLED_CMD); //--turn on oled panel
	OLED_Display_On();
	OLED_Clear();
}  

void OLED_Display_Init(void)
{
	OLED_Init();
	/*Line1 胖虎智能家居系统*/
	OLED_ShowCHinese(0,0,8);
	OLED_ShowCHinese(16,0,9);
	OLED_ShowCHinese(32,0,0);
	OLED_ShowCHinese(48,0,1);
	OLED_ShowCHinese(64,0,2);
	OLED_ShowCHinese(80,0,3);
	OLED_ShowCHinese(96,0,4);
	OLED_ShowCHinese(112,0,5);
}

三、实验效果

结尾：

对这个项目感兴趣的小伙伴，完全可以根据本项目的文章教程，一步步自己搭建属于自己的STM32-FreeRTOS智能家居项目，如果需要完整资料和完整硬件的可私信我（有偿）：原理图、STM32源码、Android app源码、操作教程。

嵌入式crafter
关注
iic驱动oled屏幕显示温湿度基于FreeRTOS实现多任务
Paradise_Violet的博客
08-16 2722
我们要用高阻态，所以用开漏输出。把x,y想象成在第四象限。
STM32F4x7+freertos+lwip+ssl+MQTT-(MDK5)稳定可靠
12-11
这是公司实际项目工程（编译器用DK5）,STM32F4x7+freertos+lwip+ssl+MQTT，其中MQTT自己花了一个礼拜移植，可以同时发布消息和订阅消息（发布主题：DongLuTest，订阅主题：mymqttsubtest），经过长期测试MQTT运行...
stm32f411 freertos 驱动oled屏幕读取ds3231显示时间温度
11-14
stm32f411 freertos 驱动oled屏幕读取ds3231显示时间温度, 主要是freertos的简单使用，欢迎下载
Freertos学习第三天-ESP32基于Freertos0.96寸OLED屏幕显示
qq_61134394的博客
04-22 316
ESP32基于Freertos0.96寸OLED屏幕显示
STM32之用FreeRTOS实现DS18B20、3.5寸显示屏、ADC测芯片温度(HAL库)
03-08
嵌入式系统开发大作业，利用FreeRTOS系统开发，首先通过DS18B20获取温度显示在显示屏上，并画出温度曲线，温度曲线是显示在显示屏上的，并通过串口发送到上位机中，通过上位机可以修改报警温度。其中还有时间显示（RTC），时间显示是以表盘的形式显示，通过按键切换表盘显示和温度测量。同时还通过ADC来测量芯片的内部温度，并显示到显示屏上。
有关 STM32Cube FreeRtos 事件组的使用
MATLAboooo的博客
08-23 176
若为pdTRUE，当uxBitsToWaitFor所设置的这些事件位都置1（与模式），函数返回；若为pdFALSE，只要uxBitsToWaitFor所设置的这些事件位其中的任意一个置1（或模式），函数返回；定义flag变量接返回值，KEY0按下返回0x1000，KEY1按下返回0x0001，实现OLED屏幕刷新。uxBitsToWaitFord：指定要等待的事件位（final result）；返回值：返回当所等待的事件位置1以后的事件标志组的值。uxBitsToClear：要指定置1 的事件位；
基于C语言+STM32f103+FreeRTOS+云平台的智能家居安防系统+源码+开发文档说明（毕业设计&课程设计&项目开发）
03-25
基于C语言+STM32f103+FreeRTOS+云平台的智能家居安防系统+源码+开发文档说明，适合毕业设计、课程设计、项目开发。项目源码已经过严格测试，可以放心参考并在此基础上延申使用~ 基于C语言+STM32f103+FreeRTOS+云...
基于STM32f103+FreeRTOS+云平台开发的智能家居安防系统，防控方面实现了非法入室监测、燃气泄漏报警功能，完整源码
02-24
基于 STM32f103+FreeRTOS+云平台 的智能家居安防系统；防控方面实现了非法入 室监测、燃气泄漏报警功能；环境监测方面实现了温湿度数据采集、光照强度采集、烟雾数值检测功能；并将以上检测得到的实时数据上传云平台...
STM32+FreeRTOS+W5500+MQTT
11-14
STM32+FreeRTOS+W5500+MQTT是一个集成的嵌入式系统解决方案，主要应用于物联网（IoT）设备。在这个系统中，STM32是微控制器，FreeRTOS是一个实时操作系统，W5500是网络接口芯片，而MQTT是消息传输协议。 STM32是意...
freertos入门---创建FreeRTOS工程
weixin_47268803的博客
05-02 1070
  双击运行STM32CubeMX,在首页选择“ACCESS TO MCU SELECTOR”,如下图所示：   在MCU选型界面，输入自己想要开发的芯片型号，如：STM32F103C8T6:   在“System Core”的“RCC”处选择外部高速时钟源和低速时钟源，这里我们选择外部高速时钟源，如下图所示：   此外，本实验使用FreeRTOS,FreeRTOS的时基使用的是Systick,而STM32CubeMX中默认的hal库时基也是Systick，为了避免可能的冲突，最好将HAL库的时基换为其
07.2、程序：FreeRTOS+LCD全功能.zip
05-16
基于FreeRTOS系统，实现了：屏幕显示显示汉字、不同字号的英文、图形，并且可以变换颜色。此程序是基于神舟IV号开发板实现的。
08.2、程序：FreeRTOS+LCD+Touch.zip
05-16
基于FreeRtos操作系统 ，实现了：屏幕会展示显示汉字、不同字号的英文、图形，并且可以变换颜色，可以触摸显示。程序基于神舟IV号开发板实现的。
基于STM32 的实时时钟并显示在0.96OLED
07-01
基于STM32F103c8t6 的RTC 并打印到OLED上的实时时钟。可以显示年月日，星期，时分秒.
基于STM32的FreeRTOS加DS18B20测温液晶屏显示
06-19
将FreeRTOS操作系统移植到STM32F107开发板上，并使用DS18B20测温，将测的数据显示在3.2寸液晶屏上，是学习嵌入式操作系统移植，任务调度等很好的基础资料，在使用DS18B20测温时，使用定时器精确延时，解决了使用软延时或者系统滴答时钟与操作系统冲突的问题。若使用的是其他操作系统，也可以做参考！
基于stm32的半实物仿平台开发——FreeRTOS、PID控制电机
02-24 4715
本文基于STM32F103ZET6开发板开发了一个直流电机的实物控制系统，在stm32上采用freertos操作系统开发了基于PID的电机转速控制器。
FreeRTOS(ESP32)学习日记006-创建U8G2 Oled的FreeRtos任务可能会遇到的问题
weixin_58392839的博客
03-06 644
介绍了在使用FreeRTOS操作oled屏幕（U8G2库）可能会出现的问题及其解决方案
stm32智能小车(FreeRTOS项目练习)
热门推荐
qq_47775761的博客
05-05 1万+
看完了FreeRTOS的教程，想找个项目练手，淘宝或者网上少有基于FreeRTOS的项目，于是我就想用FreeRTOS做个智能小车，可能FreeRTOS不是做小车的最优解，但主要目的是用来练手。
手把手从0到1教你做STM32+FreeRTOS智能家居--第1篇之点亮LED灯
最新发布
MOS_JBET的博客
05-17 1173
从本篇文章开始，作者将通过手把手的方式从0到1教你做出一个基于STM32+FreeRTOS智能家居项目，本项目是基于STM32的HALL库，通过本系列文章你可以学到：1.STM32的常用外设的应用，例如：GPIO、串口通讯、IIC、PWM等等。2.FreeRTOS的应用，包括任务创建、信号量等内容的使用。3.STM32CUBEMX的使用。4.看懂简单的硬件原理图。
项目1:STM32+DHT11+FreeRTOS+emwin+LCD
hmh520i的博客
05-08 1693
项目1:STM32+DHT11+FreeRTOS+emwin+LCD
FreeRTOS点亮LED
07-27
在使用FreeRTOS点亮LED的过程中，可以按照以下步骤进行配置和编写程序： 1. 首先，在main.h文件中定义LED的开关宏，例如： ``` #define led2_off HAL_GPIO_WritePin(GPIOC, LED2_Pin, GPIO_PIN_RESET) #define led2_on HAL_GPIO_WritePin(GPIOC, LED2_Pin, GPIO_PIN_SET) #define led1_off HAL_GPIO_WritePin(GPIOC, LED1_Pin, GPIO_PIN_RESET) #define led1_on HAL_GPIO_WritePin(GPIOC, LED1_Pin, GPIO_PIN_SET) ``` 2. 在freertos.c文件中编写任务函数。例如，可以创建两个任务函数，分别用于控制LED1和LED2的点亮和熄灭。示例代码如下： ``` void StartDefaultTask(void const * argument) { for(;;) { led1_on; osDelay(1000); led1_off; osDelay(1000); } } void StartTask02(void const * argument) { for(;;) { led2_on; osDelay(1000); led2_off; osDelay(1000); } } ``` 3. 在配置FreeRTOS时，选择Middleware选项卡，点击FREERTOS，然后选择CMSIS_V1作为接口。其他配置参数可以保持默认即可。 通过以上步骤，你可以在FreeRTOS中实现LED的点亮和熄灭。 #### 引用[.reference_title] - *1* [从0到1学习FreeRTOS：FreeRTOS + 基础外设 ：（一）点亮板载LED灯](https://blog.csdn.net/qq_38351824/article/details/102397035)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^control_2,239^v3^insert_chatgpt"}} ] [.reference_item] - *2* [基于STM32F103C8T6 HAL库 配置的FreeRTOS进行多线程LED点亮](https://blog.csdn.net/qq_47183165/article/details/120243405)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^control_2,239^v3^insert_chatgpt"}} ] [.reference_item] - *3* [FreeRTOS 学习(一)](https://blog.csdn.net/weixin_52694360/article/details/125712360)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^control_2,239^v3^insert_chatgpt"}} ] [.reference_item] [ .reference_list ]
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值