Matlab笔记——waitforbuttonpress的使用
(版本:MATLAB2015b)
一、waitforbuttonpress
使用waitforbuttonpress ,该函数会根据用户的下一步操作返回一个值,具体如下:
return 0 if it detects a mouse button click %鼠标点击;
return 1 if it detects a key press %键盘键入;
用这个功能结合CurrentPoint可以实现在matlab中作图时循环持续返回点击的位置的信息
以及通过键盘键入任意键来退出程序,十分方便。
例1:本例中实现在绘制的图像中任意点击某点,返回该点对应的二维坐标值,可以持续点击并且可以通过随时从键盘键入任意字符来终止程序;
t = 0:pi/36:2*pi;
x = cos(t)*10;
y = sin(t)*6;
figure(1);
ell = plot(x,y); %以绘制一个椭圆为例;
grid on;
set(ell,'LineWidth',3);
k = waitforbuttonpress; %获取第一个操作
while(k == 0)
pt = get(gca,'CurrentPoint'); %获取最近一次鼠标点击的位置信息,返回一个2*3的struct;
x = pt(1,1);
y = pt(1,2);%这里没有用到z坐标的值;
fprintf('The position is ( %.3f , %.3f )\n',x,y); %我们保留三位小数;
k = waitforbuttonpress; %再次获取鼠标或键盘的键入指令;
if(k == 1)
disp('Exit!'); %如果是键盘输入,
break; %则直接跳出循环,结束程序;
end
end %否则循环等待获取新的鼠标点击信息;
close all; %关闭图像;
例2:
下面再展示一个结合CurrentPoint 和CurrentCharacter使用的例子,
CurrentPoint:从当前坐标轴句柄(gca)返回最近一次鼠标点击的点的坐标信息;
CurrentCharacter:从当前图像句柄(gcf)返回最近一次键盘键入的一个字符的信息;
在本例中,用户可以点击图像中的任意点,命令行会输出对应的坐标信息,输入c或C可改变图像线条的颜色(提前设定好的两种颜色可重复相互交换,下同),输入w或W可以改变图像线条的宽度,输入s或S可以改变线条的类型,输入x或X可以退出程序。
t = 0:pi/36:2*pi;
x = cos(t)*10;
y = sin(t)*6;
figure(1);
ell = plot(x,y);
grid on;
k = 0; c = 0; s = 0; w = 0; %参数状态记录符;
while(k == 0)
k = waitforbuttonpress; %等待用户输入;
if(k == 1)
k = 0; %使得循环不被终止而是继续;
Cha = get(gcf,'CurrentCharacter'); %获取最近一次键入的字符;
if(strcmpi(Cha,'c')) %使用strcmpi函数比较字符,不区分大小写;
if(c == 0)
c = 1;
set(ell,'Color','r');
else
c = 0;
set(ell,'Color','b');
end
disp('Color changed!');
end
if(strcmpi(Cha,'s'))
if(s == 0)
s = 1;
set(ell,'LineStyle','-.');
else
s = 0;
set(ell,'LineStyle','default');
end
disp('LineStyle changed!');
end
if(strcmpi(Cha,'w'))
if(w == 0)
w = 1;
set(ell,'LineWidth',3);
else
w = 0;
set(ell,'LineWidth',1.5);
end
disp('LineWidth changed!');
end
if(strcmpi(Cha,'x'))
disp(' Exit!');
break;
end
else
pt = get(gca,'CurrentPoint'); %获取鼠标点击的点的信息;
x = pt(1,1);
y = pt(1,2);
fprintf('The position is ( %.3f , %.3f )\n',x,y);
end
end
close all;
注:如有错误和不当的地方,还请各路大佬批评指正!