eNSP 实验

实验要求：

 实验步骤：

1.IP地址规划以及网段的划分

 

 2.给各个路由器配IP

AR1：

<Huawei>sy

[Huawei]int g 0/0/1    

[Huawei-GigabitEthernet0/0/1]ip address 192.168.1.33 28
[Huawei-GigabitEthernet0/0/1]interface g 0/0/2
[Huawei-GigabitEthernet0/0/2]ip add 192.168.1.49 28
[Huawei]int loopback 1
[Huawei-LoopBack1]ip add 192.168.1.1 28
[Huawei-LoopBack1]int loopback 2
[Huawei-LoopBack2]ip add 192.168.1.17 28

查看已配好的IP：[Huawei]display ip int br

AR2 AR3 AR4 AR5 根据规划的IP重复以上操作

AR5：环回接口5.5.5.1

 

3.手写静态路由

AR1：

[Huawei]ip route-    
[Huawei]ip route-static 192.168.1.128 27 192.168.1.34 
[Huawei]ip route-static 192.168.1.192 27 192.168.1.34
[Huawei]ip route-static 192.168.1.64 28 192.168.1.34
[Huawei]ip route-static 192.168.1.96 28 192.168.1.34
[Huawei]ip route-static 192.168.1.112 28 192.168.1.34
[Huawei]ip route-static 192.168.1.160 27 192.168.1.150

[Huawei]ip route-static 192.168.1.80 28 192.168.1.150
[Huawei]ip route-static 192.168.1.192 27 192.168.1.150
[Huawei]ip route-static 192.168.1.96 28 192.168.1.150
[Huawei]ip route-static 192.168.1.112 28 192.168.1.150

查看路由器中路由表：[Huawei]display ip routing-table 

AR2 AR3 AR4 AR5 根据以上操作 配静态路由

检测是否配好：尽量每个IP都ping一下

4.加缺省路由

[r1]ip route-static 0.0.0.0 0 192.168.1.34

[r2]ip route-static 0.0.0.0 0 192.168.1.66

[r3]ip route-static 0.0.0.0 0 192.168.1.82

[r4]ip route-static 0.0.0.0 0 192.168.1.98

     ip route-static 0.0.0.0 0 192.168.1.114