重启网卡出现错误“failed because the control process exited with error code.See“systemctl status network.ser”

Slay0701

已于 2023-02-23 10:57:36 修改

阅读量1.5k

点赞数

文章标签： linux 服务器网络

于 2023-02-22 11:13:14 首次发布

本文链接：https://blog.csdn.net/Sldy0701/article/details/129158409

版权

在面对虚拟云主机的10段IP严重丢包问题，导致无法远程连接时，进行了包括快照备份、网卡卸载重装、MAC地址校验等一系列排查。最终发现是MAC地址不一致引发了问题，通过修改MAC地址后恢复正常。系统在重启网卡时出现了错误代码，通过systemctlstatusnetwork.service和journalctl-xe命令获取了更多错误详情。

摘要由CSDN通过智能技术生成

1、问题没描述

由于业务反馈虚拟云主机10段IP出现丢包严重至不能远程连接上，多方面排查没有解决，遇到新的问题。

2、处理过程

①首先对云主机进行快照（以防万一出现业务主机搞坏现象）
②将当前丢包的网卡进行卸载重新挂载网卡；
③新网卡创建挂载上去并没有发现丢包情况，业务交换机到宿主机没有丢包；
④重新将创建原来网卡IP挂载至主机；
⑤将④的网卡挂载发现ping不通识别不了，重启网卡出现以下报错；

failed because the control process exited with error code.See"systemctl status network.service" and "journalctl -xe"for details

⑥后经排查发现是mac地址不一致，更改mac地址回复正常。
使用命令ip addr show可以查看mac地址
在这里插入图片描述

确定要放弃本次机会？

福利倒计时

: :

立减 ¥

普通VIP年卡可用

立即使用

Slay0701

关注关注

0
点赞
踩
1

收藏

觉得还不错? 一键收藏
0
评论
复制链接

分享到 QQ

分享到新浪微博

扫一扫

docker Job for docker.service failed because the control process exited with error code.

Hello Word!

11-16

3万+

docker无法重启 $ sudo service docker restart Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. 无法查看容器 $ sudo docker container ls Cannot connect to the Doc

Job for network.service failed because the control process exited with error code. See "systemctl st

qq961573863的博客

09-03

1691

问题详情：操作系统：centos7.6 root@oraclelinux ~]# ping www.baidu.coom ping: www.baidu.coom: Name or service not known [root@oraclelinux ~]# ping www.baidu.com ping: www.baidu.com: Name or service not known [r...

参与评论您还未登录，请先登录后发表或查看评论

systemctl start docker异常 Job for docker.service failed because the control process exited with error

Aimmon

08-03

8274

Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details.

failed because the control process exited with error code ...(code=exited, status=1/FAILURE) 的解决办法

热门推荐

小志的博客

07-04

7万+

一、报错如下 Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details. 二、解决原因 1、先检查nginx配置文件正否正确输入nginx -t 命令，如果反回 successful表示配置文件无错误，否则说明配置文件有错误。 [root@localho

Docker启动报错failed because the control process exited with error code.

PyongSen的博客

02-21

1534

Docker启动报错failed because the control process exited with error code.

Job for mysqld.service failed because the control process exited with error code. See “systemctl sta

YangMay5的博客

01-22

6386

问题：启动mysql服务或者重启，报下面错误 systemctl restart mysqld Job for mysqld.service failed because the control process exited with error code. See "systemctl status mysqld.service" and "journalctl -xe" for details. 分析原因自己之前强制关机，导致要找的file-pid文件不存在了如何解决查看原来这个文件的路径，创建

Job for network.service failed because the control process exited with error code. See “systemctl st

weixin_38996555的博客

06-02

9919

Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.一、由于Xshell掉了，重新连接失败。先ping一下，看网络是否通的二、重启network服务，发现报错三、根据提示查看报错信息四、解决方法1.查验配置文件是否错误2.可能与NetworkManage

Docker 启动报：Job for docker.service failed because the control process exited with error code. See “解决

cainiao_dashen的博客

10-30

1万+

1、在/etc/docker/daemon.json 路径下添加代码。2、在/etc/sysconfig/docker-storage里面添加下面代码没有的手动创建 touch /etc/sysconfig/docker-storage。systemctl status docker.service 查看是否运行成功，绿色running 代表成功了。网上看到的，前两种方法不行可以试下：在/etc/docker文件目录下，找到。重新按照官方文档一步一步细心的安装，可能是安装的方法不对或者漏了步骤。

Job for php-fpm.service failed because the control process exited with error code. See "systemctl st

Cookie_1030的专栏

09-05

3万+

centos7.2环境下安装php5.6.17。启动失败。 Job for php-fpm.service failed because the control process exited with error code. See "systemctl status php-fpm.service" and "journalctl -xe" for details.

mysql.service failed because the control process exited with error code问题

qq_34332010的博客

07-02

6万+

mysql.service failed because the control process exited with error code错误

Job for network.service failed because the control process exited with error code.

weixin_53572775的博客

08-12

4万+

在我们重启网卡时,发生如下报错: [root@real_server2 network-scripts]# systemctl restart network Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details 首先我们要学会查看报错内容,这句话的

重启vsftp服务遇到Job for vsftpd.service failed because the control process exited with error code.

Mortalz7

10-13

4483

Job for vsftpd.service failed because the control process exited with error code. See "systemctl status vsftpd.service" and "journalctl -xe" for details.

the control process exited with error code

dbc_zt的博客

10-13

7083

记录一次虚拟机网络连接不上问题昨天还在使用的三台centos7.4机器，之前已经配置过静态ip 172.16.43.160 hadoop01 172.16.43.161 hadoop02 172.16.43.162 hadoop03 今天重启，其中两台(hadoop01 hadoop02)不能访问故障排查查看了hadoop01（172.16.43.160）的 /etc/sysconfig/network-scripts/ 目录下网络配置文件，确认了文件没有问题 TYPE="Ethernet" PR

Job for nginx.service failed because the control process exited with error code. See systemctl status nginx.service and journalctl -xe for details.

06-03

这个错误是因为nginx服务启动失败了，你需要通过以下命令来查看详细的错误信息： 1. 使用命令 systemctl status nginx.service 查看nginx服务的状态，这个命令可以告诉你nginx服务是否已经启动，如果没有启动，会显示错误信息。 2. 使用命令 journalctl -xe 查看系统日志，这个命令可以告诉你更详细的错误信息，可能会有一些关键性的提示，帮助你解决问题。一般来说，这个错误可能是由于配置文件错误、端口占用、权限问题等引起的。你需要根据具体的错误信息，逐一排查以上可能引起错误的原因，并进行相应的修复。