Qcom流程8x12

 

Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[140] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[160] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[170] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[700] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[    0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
[    0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[    0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[    0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[    0.000000] cma: CMA: reserved 4 MiB at 1e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] IMEM DT static mapping successful
[    0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 107648
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 136MB 289MB = 425MB total
[    0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]      lowmem : 0xcde00000 - 0xe0000000   ( 290 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xcde00000   (  86 MB)
[    0.000000]      lowmem : 0xc0000000 - 0xc8800000   ( 136 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c4f41c   (12574 kB)
[    0.000000]       .init : 0xc0d00000 - 0xc0e12e00   (1100 kB)
[    0.000000]       .data : 0xc0e14000 - 0xc0ef8e08   ( 916 kB)
[    0.000000]        .bss : 0xc0ef8e2c - 0xc1113440   (2154 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000179] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000204] pid_max: default: 32768 minimum: 301
[    0.000489] Security Framework initialized
[    0.000540] SELinux:  Initializing.
[    0.000691] Mount-cache hash table entries: 512
[    0.001985] Initializing cgroup subsys debug
[    0.002002] Initializing cgroup subsys cpuacct
[    0.002013] Initializing cgroup subsys freezer
[    0.002068] CPU: Testing write buffer coherency: ok
[    0.002564] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002652] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.005158] Setting up static identity map for 0x8a42f0 - 0x8a4354
[    0.005194] Configuring XPU violations to be fatal errors
[    0.005208] MSM Memory Dump table set up
[    0.012573] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.018928] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.025256] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.025364] Brought up 4 CPUs
[    0.025383] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.039683] dummy:
[    0.056230] NET: Registered protocol family 16
[    0.068751] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.070882] KPI: Bootloader start count = 55949
[    0.070897] KPI: Bootloader end count = 84033
[    0.070907] KPI: Bootloader display count = 66799
[    0.070917] KPI: Bootloader load kernel count = 2449
[    0.070929] KPI: Kernel MPM timestamp = 111969
[    0.070939] KPI: Kernel MPM Clock frequency = 32768
[    0.070962] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[    0.070971]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[    0.085801] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[    0.090649] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[    0.121165] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[    0.121853] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.122531] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[    0.123206] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.123915] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[    0.124614] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[    0.125324] 8110_l1: 1225 mV normal idle
[    0.126046] 8110_l2: 1200 mV normal idle
[    0.126719] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[    0.127329] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[    0.127964] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[    0.128940] 8110_l4: 1200 mV normal idle
[    0.129601] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[    0.130280] 8110_l6: 1800 mV normal idle
[    0.130971] 8110_l7: 2050 mV normal idle
[    0.131682] 8110_l8: 1800 mV normal idle
[    0.132364] 8110_l9: 2050 mV normal idle
[    0.133083] 8110_l10: 1800 mV normal idle
[    0.133731] 8110_l10_ao: 1800 mV normal idle
[    0.134384] 8110_l10_so: 1800 mV normal idle
[    0.135030] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.136052] 8110_l14: 1800 mV normal idle
[    0.136761] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.137429] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[    0.138111] 8110_l17: 2900 mV normal idle
[    0.138824] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.139499] 8110_l19: 2850 mV normal idle
[    0.140201] 8110_l20: 3075 mV normal idle
[    0.140897] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.141572] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.143212] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[    0.143593] vdd_restriction_reg_init:Defer vdd rstr freq init
[    0.169397] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.169416] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.170101] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[    0.172139] 8110_s2: 900 <--> 1275 mV at 1150 mV
[    0.172394] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[    0.173841] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[    0.173883] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[    0.173897] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[    0.173911] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[    0.173975] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174020] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[    0.174035] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[    0.174396] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174446] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[    0.174466] cpr_init_cpr_efuse: disable = 0, local = 1
[    0.174480] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[    0.174493] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[    0.174506] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[    0.174563] cpr_init_cpr_parameters: CPR is enabled by default.
[    0.174584] cpr_config: Timer count: 0x17700 (for 5000 us)
[    0.174918] apc_corner: 0 <--> 0 mV
[    0.177557] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.178822] kworker/u:1 used greatest stack depth: 6144 bytes left
[    0.180593] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.182634] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.184964] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.188858] sps:sps is ready.
[    0.190580] gdsc_vfe:
[    0.191030] gdsc_oxili_cx:
[    0.191660] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.193018] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[    0.194140] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[    0.195021] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[    0.196532] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[    0.197258] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[    0.229776] bio: create slab <bio-0> at 0
[    0.230987] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[    0.231594] ION heap vmalloc created
[    0.231756] ION heap kmalloc created
[    0.231818] ION heap iommu created
[    0.231848] ION heap qsecom created
[    0.231884] ION heap pil_1 created at 0x0c500000 with size 1300000
[    0.231931] ION heap pil_2 created at 0x08800000 with size 3d00000
[    0.233401] Linux media interface: v0.10
[    0.233494] Linux video capture interface: v2.00
[    0.235169] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[    0.236332] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[    0.238693] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[    0.239502] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[    0.240216] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[    0.241220] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[    0.241664] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[    0.242878] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[    0.243067] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[    0.243284] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[    0.243514] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[    0.243726] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[    0.243910] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[    0.244237] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[    0.244657] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[    0.244846] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[    0.245028] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[    0.245281] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[    0.245465] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[    0.245724] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[    0.245908] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[    0.246120] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[    0.246304] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[    0.246620] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[    0.246902] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[    0.247091] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[    0.247357] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[    0.247533] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.248392] Bluetooth: Core ver 2.16
[    0.248466] NET: Registered protocol family 31
[    0.248476] Bluetooth: HCI device and connection manager initialized
[    0.248493] Bluetooth: HCI socket layer initialized
[    0.248506] Bluetooth: L2CAP socket layer initialized
[    0.248827] Bluetooth: SCO socket layer initialized
[    0.249268] cfg80211: Calling CRDA to update world regulatory domain
[    0.249320] cfg80211: World regulatory domain updated:
[    0.249332] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.249349] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249364] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249379] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.249395] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249410] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.250067] Switching to clocksource arch_sys_counter
[    0.303569] NET: Registered protocol family 2
[    0.304046] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.305489] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.308755] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.309198] TCP: Hash tables configured (established 16384 bind 16384)
[    0.309211] TCP: reno registered
[    0.309329] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.309452] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.309899] NET: Registered protocol family 1
[    0.310549] Trying to unpack rootfs image as initramfs...
[    0.353611] Freeing initrd memory: 448K
[    0.359109] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[    0.360111] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[    0.360389] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[    0.361399] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[    0.361608] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[    0.362635] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[    0.362878] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[    0.363941] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[    0.364150] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[    0.365209] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[    0.365455] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[    0.366545] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[    0.366762] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[    0.367884] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[    0.369507] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[    0.374358] pil_pronto fb21b000.qcom,pronto: using secure boot
[    0.383588] NET: Registered protocol family 27
[    0.386207] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[    0.391410] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[    0.391714] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[    0.392922] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[    0.392954] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[    0.393339] msm_rpm_log_probe: OK
[    0.405438] audit: initializing netlink socket (disabled)
[    0.405488] type=2000 audit(0.390:1): initialized
[    0.523299] fuse init (API version 7.18)
[    0.523791] msgmni has been set to 792
[    0.525900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.525913] io scheduler noop registered
[    0.525921] io scheduler deadline registered
[    0.525940] io scheduler row registered
[    0.526107] io scheduler cfq registered (default)
[    0.526115] io scheduler test-iosched registered
[    0.526401] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[    0.526489] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[    0.526579] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[    0.526659] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[    0.526791] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[    0.527108] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[    0.527231] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[    0.529295] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[    0.529525] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[    0.529535] mdss_dsi_panel_init:989 Partial update disabled.
[    0.529593] dsi_parse_gpio:156, Disp_en gpio not specified
[    0.530076] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[    0.562590] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[    0.604406] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.604427] AXI: get_pdata(): Error: Client name not found
[    0.604435] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    0.604443] msm_serial_hsl_probe: Bus scaling is disabled
[    0.604576] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[    0.604638] msm_hsl_console_setup: console setup on port #0
[    2.165274] console [ttyHSL0] enabled
[    2.169293] msm_serial_hsl_init: driver initialized
[    2.177742] diagchar initialized now
[    2.182671] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    2.199504] brd: module loaded
[    2.205336] loop: module loaded
[    2.207873] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[    2.212329] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[    2.217851] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[    2.223490] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[    2.231591] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    2.237903] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    2.244771] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    2.251554] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    2.258914] sps: BAM device 0xf9904000 is not registered yet.
[    2.264153] sps:BAM 0xf9904000 is registered.
[    2.268594] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[    2.276607] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[    2.284002] tun: Universal TUN/TAP device driver, 1.6
[    2.288011] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.294294] rmnet_init: BAM devices[9]
[    2.306285] PPP generic driver version 2.4.2
[    2.309660] PPP BSD Compression module registered
[    2.314235] PPP Deflate Compression module registered
[    2.320018] PPP MPPE Compression module registered
[    2.324036] NET: Registered protocol family 24
[    2.328755] wcnss_wlan probed in built-in mode
[    2.335173] msm_otg f9a55000.usb: msm_otg probe
[    2.339109] msm_otg f9a55000.usb: OTG regs = c8942000
[    2.346613] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    2.351537] msm_otg f9a55000.usb: phy_reset: success
[    2.357146] mbim_init: initialize 1 instances
[    2.360917] mbim_init: Initialized 1 ports
[    2.366869] rndis_qc_init: initialize rndis QC instance
[    2.371745] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.377910] android_usb gadget: Number of LUNs=3
[    2.382540]  lun0: LUN: removable file: (no medium)
[    2.387372]  lun1: LUN: removable read only CD-ROM file: (no medium)
[    2.393728]  lun2: LUN: removable file: (no medium)
[    2.398904] android_usb gadget: android_usb ready
[    2.404708] [himax] himax_ts_init
[    2.407022] wxun: himax_ts_probe: irq set here
[    2.411609] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[    2.417659] wxun: himax_ts_probe: reset set here
[    2.422368] ------------[ cut here ]------------
[    2.426956] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    2.437621] autorequest GPIO-0
[    2.440659] Modules linked in:
[    2.443714] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    2.453167] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    2.462716] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    2.472353] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    2.482422] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[    2.492056] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    2.501170] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    2.510631] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    2.520008] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    2.529034] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    2.538060] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    2.547090] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    2.556465] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    2.565926] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    2.574782] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    2.583566] ---[ end trace 01a43b38716dad63 ]---
[    2.910616] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.916552] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.940280] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.946212] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.970279] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.976210] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.000148] [TP] i2c_himax_read: i2c_read_block retry over 3
[    3.004763] himax_ts_probe other driver has been loaded
[    3.010055] msg26xx: msg26xx_ts_init
[    3.013589] msg26xx: TPD probe
[    3.016568] ------------[ cut here ]------------
[    3.021174] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    3.031844] autorequest GPIO-0
[    3.034883] Modules linked in:
[    3.037932] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    3.047389] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    3.056940] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    3.066576] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    3.076645] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[    3.085759] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    3.094352] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    3.103813] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    3.113190] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    3.122216] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    3.131244] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    3.140272] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    3.149647] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    3.159108] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    3.167963] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    3.176724] ---[ end trace 01a43b38716dad64 ]---
[    3.520285] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.526219] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.532492] _msg_WriteI2CSeq error -107,addr = 38
[    3.537140] msg26xx: _msg_GetVersion ret = -107
[    3.570277] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.576209] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.582483] _msg_WriteI2CSeq error -107,addr = 38
[    3.587132] msg26xx: _msg_GetVersion ret = -107
[    3.620278] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.626210] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.632482] _msg_WriteI2CSeq error -107,addr = 38
[    3.637133] msg26xx: _msg_GetVersion ret = -107
[    3.670147] msg26xx:  may be there is not msg26xx tp
[    3.674079] msg26xx: probe of 1-0026 failed with error 19
[    3.679539] FTS: ft5x0x_ts_probe enter
[    3.683256] FTS: irq = 330
[    4.111031] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[    4.117493] input: ft5x0x_ts as /devices/virtual/input/input0
[    4.280299] ft5x0x_ts 1-0038: Create proc entry success!
[    4.285018] FTS:  Firmware version = 0xb
[    4.288914] FTS:  report rate is 100Hz.
[    4.292757] FTS:  touch threshold is 48.
[    4.296408] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[    4.303622] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[    4.310064] Successfully added driver ft5x0x_ts
[    4.314536] ctp_selftest_init
[    4.317558] create_proc_entry g_ctp_selftest_proc success
[    4.322870] ctp_upgrade_init
[    4.325796] [elan] create_proc_entry 222 success
[    4.330341] create_proc_entry success
[    4.333959] ctp_if_upgrade_init
[    4.337164] ctp_if_upgrade_init create_proc_entry 222 success
[    4.342842] create_proc_entry success
[    4.346465] create_proc_entry success
[    4.350186] bma2x2_probe:
[    4.380697] bma2x2_probe: chipid=20f8
[    4.383534] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[    4.391087] bma2x2_disable,start
[    4.394861] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1401, h:m:s == 0:23:21, d/m/y = 1/0/70
[    4.402456] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[    4.410359] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1401, h:m:s == 0:23:21, d/m/y = 1/0/70
[    4.418864] using rtc device, qpnp_rtc, for alarms
[    4.423200] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[    4.431086] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[    4.436653] i2c /dev entries driver
[    4.446465] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.452292] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.459253] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.465934] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.473374] s5k4e1_init_module:153
[    4.476436] s5k4e1_init_module:158 rc -19
[    4.480972] zgc2235_init_module:141
[    4.483898] zgc2235_init_module:146 rc -19
[    4.487662] msm_sensor_i2c_probe gc2235_i2c_probe called
[    4.492945] msm_sensor_i2c_probe: of_node exisists
[    4.497528] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[    4.503709] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[    4.509244] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[    4.515166] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[    4.520894] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[    4.526345] msm_sensor_get_sub_module_index:75 src_node NULL
[    4.532005] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[    4.538252] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[    4.545378] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[    4.551191] msm_sensor_get_sub_module_index csid_core[0] = 1
[    4.556816] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[    4.563169] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[    4.569226] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[    4.575410] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[    4.581224] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[    4.586934] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[    4.592770] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[    4.598391] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[    4.604053] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[    4.609678] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[    4.616467] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[    4.623236] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[    4.629991] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[    4.636778] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[    4.643549] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[    4.650322] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[    4.656637] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[    4.662994] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[    4.669260] msm_sensor_get_dt_data gpio count 3
[    4.673769] msm_sensor_get_dt_data gpio_array[0] = 13
[    4.678782] msm_sensor_get_dt_data gpio_array[1] = 15
[    4.683857] msm_thermal: Limiting cpu0 max frequency to 787200
[    4.689927] msm_sensor_get_dt_data gpio_array[2] = 85
[    4.694917] msm_thermal: Limiting cpu1 max frequency to 787200
[    4.700538] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[    4.700656] msm_thermal: Limiting cpu2 max frequency to 787200
[    4.700808] msm_thermal: Limiting cpu3 max frequency to 787200
[    4.718856] cpr_irq_handler: IRQ_STATUS = 0x45
[    4.723250] cpr_scale: last_volt[corner:2] = 1050000 uV
[    4.723269] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[    4.723281] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[    4.723295] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[    4.723306] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[    4.723316] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[    4.723330] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[    4.723344] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[    4.723357] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[    4.723379] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[    4.723391] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[    4.723415] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[    4.723431] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[    4.723445] msm_sensor_power_up:991
[    4.723478] msm_sensor_power_up index 0
[    4.723486] msm_sensor_power_up type 2
[    4.734966] msm_sensor_power_up index 1
[    4.734975] msm_sensor_power_up type 2
[    4.746412] msm_sensor_power_up index 2
[    4.746421] msm_sensor_power_up type 2
[    4.757781] msm_sensor_power_up index 3
[    4.757790] msm_sensor_power_up type 0
[    4.763879] msm_sensor_power_up index 4
[    4.763888] msm_sensor_power_up type 1
[    4.810162] msm_sensor_power_up index 5
[    4.810171] msm_sensor_power_up type 1
[    4.857623] cpr_scale: Down: cpr status = 0x000036b9 (error_steps=14)
[    4.860160] msm_sensor_power_up index 6
[    4.860169] msm_sensor_power_up type 1
[    4.871596] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[    4.910160] msm_sensor_power_up index 7
[    4.912955] msm_sensor_power_up type 1
[    4.960153] msm_sensor_power_up index 8
[    4.962948] msm_sensor_power_up type 3
[    4.966988] qup_i2c f9928000.i2c: QUP: I2C status flags :0x1363c8, irq:132
[    4.973567] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[    4.979816] msm_sensor_match_id: gc2235: read id failed
[    4.985025] msm_sensor_power_up:1095 match id failed rc -107
[    4.990662] msm_sensor_power_up:1102 failed
[    4.994806] msm_sensor_power_up index 8
[    4.998624] msm_sensor_power_up type 3
[    5.002378] msm_sensor_power_up index 7
[    5.006177] msm_sensor_power_up type 1
[    5.050181] msm_sensor_power_up index 6
[    5.052976] msm_sensor_power_up type 1
[    5.100159] msm_sensor_power_up index 5
[    5.102954] msm_sensor_power_up type 1
[    5.150159] msm_sensor_power_up index 4
[    5.152954] msm_sensor_power_up type 1
[    5.200189] msm_sensor_power_up index 3
[    5.202983] msm_sensor_power_up type 0
[    5.212763] msm_sensor_power_up index 2
[    5.215558] msm_sensor_power_up type 2
[    5.230619] msm_sensor_power_up index 1
[    5.233415] msm_sensor_power_up type 2
[    5.248501] msm_sensor_power_up index 0
[    5.251328] msm_sensor_power_up type 2
[    5.266395] msm_sensor_i2c_probe gc2235 power up failed
[    5.270619] gc2235: probe of 6-0078 failed with error -107
[    5.280557] lirc_dev: IR Remote Control driver registered, major 241
[    5.285961] IR NEC protocol handler initialized
[    5.290643] IR RC5(x) protocol handler initialized
[    5.295249] IR RC6 protocol handler initialized
[    5.299762] IR JVC protocol handler initialized
[    5.304303] IR Sony protocol handler initialized
[    5.308877] IR RC5 (streamzap) protocol handler initialized
[    5.314455] IR SANYO protocol handler initialized
[    5.319120] IR MCE Keyboard/mouse protocol handler initialized
[    5.324957] IR LIRC bridge handler initialized
[    5.330203] BMS: qpnp_bms_init: QPNP BMS INIT
[    5.333813] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[    5.341327] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[    5.388243] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    5.397377] cpuidle: using governor ladder
[    5.401389] cpuidle: using governor menu
[    5.404398] sdhci: Secure Digital Host Controller Interface driver
[    5.410531] sdhci: Copyright(c) Pierre Ossman
[    5.415484] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.421072] AXI: get_pdata(): Error: Client name not found
[    5.425957] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.435036] mmc0: no vmmc regulator found
[    5.440522] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[    5.446576] AXI: get_pdata(): Error: Client name not found
[    5.451730] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.461089] mmc1: no vmmc regulator found
[    5.466534] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[    5.474843] zram: Created 1 device(s) ...
[    5.482828] ashmem: initialized
[    5.485104] logger: created 256K log 'log_main'
[    5.491628] logger: created 256K log 'log_events'
[    5.497451] logger: created 256K log 'log_radio'
[    5.503219] logger: created 256K log 'log_system'
[    5.513808] sps:BAM 0xf9a44000 is registered.
[    5.518988] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    5.529730] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot
[    5.537482] input: qpnp_pon as /devices/virtual/input/input3
[    5.543741] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[    5.548253] coresight-fuse fc4be024.fuse: Fuse initialized
[    5.554072] coresight-cti fc310000.cti: CTI initialized
[    5.558734] coresight-cti fc311000.cti: CTI initialized
[    5.563960] coresight-cti fc312000.cti: CTI initialized
[    5.569181] coresight-cti fc313000.cti: CTI initialized
[    5.574374] coresight-cti fc314000.cti: CTI initialized
[    5.579583] coresight-cti fc315000.cti: CTI initialized
[    5.584818] coresight-cti fc316000.cti: CTI initialized
[    5.590021] coresight-cti fc317000.cti: CTI initialized
[    5.595259] coresight-cti fc318000.cti: CTI initialized
[    5.600462] coresight-cti fc351000.cti: CTI initialized
[    5.605638] coresight-cti fc352000.cti: CTI initialized
[    5.610859] coresight-cti fc353000.cti: CTI initialized
[    5.616018] coresight-cti fc354000.cti: CTI initialized
[    5.621093] mmc0: BKOPS_EN bit = 0
[    5.621339] coresight-cti fc335000.cti: CTI initialized
[    5.621565] coresight-cti fc338000.cti: CTI initialized
[    5.621800] coresight-cti fc33c000.cti: CTI initialized
[    5.622019] coresight-cti fc360000.cti: CTI initialized
[    5.622706] coresight-csr fc301000.csr: CSR initialized
[    5.654257] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[    5.659664] sps:BAM 0xfc37c000 is registered.
[    5.664273] coresight-tmc fc326000.tmc: TMC initialized
[    5.670165] coresight-tmc fc325000.tmc: TMC initialized
[    5.675592] coresight-tpiu fc320000.tpiu: seta gpios not specified
[    5.680795] coresight-tpiu fc320000.tpiu: setb gpios not specified
[    5.687066] coresight-tpiu fc320000.tpiu: TPIU initialized
[    5.692485] mmc0: new HS200 MMC card at address 0001
[    5.693152] coresight-funnel fc323000.funnel: FUNNEL initialized
[    5.693372] coresight-funnel fc321000.funnel: FUNNEL initialized
[    5.693587] coresight-funnel fc322000.funnel: FUNNEL initialized
[    5.693805] coresight-funnel fc355000.funnel: FUNNEL initialized
[    5.694500] coresight-replicator fc324000.replicator: REPLICATOR initialized
[    5.695397] coresight-stm fc302000.stm: STM initialized
[    5.696130] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[    5.697153] coresight-etm fc34c000.etm: ETM initialized
[    5.746663] coresight-etm fc34d000.etm: ETM initialized
[    5.751619] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[    5.752095] coresight-etm fc34e000.etm: ETM initialized
[    5.752594] coresight-etm fc34f000.etm: ETM initialized
[    5.753411] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[    5.754124] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[    5.754833] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[    5.755527] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[    5.757176] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    5.757205] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    5.768174] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[    5.769006] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    5.770221] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    5.770814] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    5.775174] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    5.775668] Netfilter messages via NETLINK v0.30.
[    5.775788] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[    5.776914] ctnetlink v0.93: registering with nfnetlink.
[    5.777442] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    5.777454] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    5.777867] xt_time: kernel timezone is -0000
[    5.778494] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.778957] arp_tables: (C) 2002 David S. Miller
[    5.779060] TCP: cubic registered
[    5.780373] NET: Registered protocol family 10
[    5.785300] Mobile IPv6
[    5.785363] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.785659] IPv6 over IPv4 tunneling driver
[    5.786610] NET: Registered protocol family 17
[    5.786747] Bridge firewalling registered
[    5.786771] Ebtables v2.0 registered
[    5.917559] Bluetooth: RFCOMM TTY layer initialized
[    5.922393] Bluetooth: RFCOMM socket layer initialized
[    5.922434] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[    5.926019]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[    5.942371] Bluetooth: RFCOMM ver 1.11
[    5.946013] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.951337] Bluetooth: BNEP filters: protocol multicast
[    5.956520] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    5.963090] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    5.970089] Registering SWP/SWPB emulation handler
[    5.983212] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    5.989708] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    5.998335] input: gpio-keys as /devices/gpio_keys.60/input/input4
[    6.000281] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.000313] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.000669] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.000680] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.000703] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.000822] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.000843] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.006152] batfet:
[    6.017919] msm_otg f9a55000.usb: USB in low power mode
[    6.018086] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[    6.051927] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.083722] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.091305] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:23:23 UTC (1403)
[    6.103078] clock_late_init: Removing enables held for handed-off clocks
[    6.113602] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.123067] ALSA device list:
[    6.125008]   No soundcards foun    6.129302] Freeing init memory: 72K
[    6.163710] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.174352] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.181926] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.221390] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.228731] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.237070] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.245304] msm_thermal: Max frequency reset for cpu0
[    6.252077] msm_thermal: Max frequency reset for cpu1
[    6.256394] msm_thermal: Max frequency reset for cpu2
[    6.261338] msm_thermal: Max frequency reset for cpu3
[    6.284134] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.291486] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.304028] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.351221] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.358522] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3944247 ocv = 4067055 r_sense_uohm = 9406 warm_reset = 0
[    6.369867] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.377271] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.384251] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    6.394135] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.400479] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.408303] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.426046] type=1403 audit(1403.820:2): policy loaded auid=4294967295 ses=4294967295
[    6.433092] SELinux: Loaded policy from (null)
[    6.442620] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[    6.450659] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[    6.458691] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    6.469504] init: invalid uid 'fm_radio'
[    6.566806] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1403, h:m:s == 0:23:23, d/m/y = 1/0/70
[    7.034116] init: cannot open '/initlogo.rle'
[    7.142372] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.354209] EXT4-fs (mmcblk0p22): recovery complete
[    7.359025] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    7.436895] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[    7.484297] e2fsck used greatest stack depth: 5328 bytes left
[    7.489069] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    7.493649] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49696/524288 blocks
[    7.511078] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    7.520232] init used greatest stack depth: 5212 bytes left
[    7.537152] EXT4-fs (mmcblk0p14): recovery complete
[    7.541926] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.550072] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[    7.559584] EXT4-fs (mmcblk0p21): recovery complete
[    7.564420] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[    7.571829] SELinux:  Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[    7.589759] EXT4-fs (mmcblk0p13): recovery complete
[    7.594596] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.656489] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    7.666456] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[    7.684521] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[    7.892670] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[    7.945000] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    7.958549] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[    7.967536] apr_tal:Q6 Is Up
[    7.969981] diag: In diag_send_msg_mask_update, invalid status 0
[    7.969992] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    7.970333] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[    7.970448] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    7.972599] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    8.005556] diag: In diag_send_log_mask_update, invalid status 0
[    8.322403] wcnss_wlan triggered by userspace
[    8.350716] wcnss_trigger_config:  adc get failed
[    8.358092] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.366647] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[    8.372794] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[    8.383030] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[    8.524964] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[    8.535209] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [    8.678736] cp used greatest stack depth: 5068 bytes left
[    9.413808] diag: In diag_send_msg_mask_update, invalid status 0
[    9.418623] diag: In diag_send_log_mask_update, invalid status 0
[    9.437502] init: untracked pid 269 exited
[    9.444431] enable_store: android_usb: already disabled
[    9.467224] msm_isp_close_node: halt timeout rc=0
[    9.473819] Error: Driver 'DS' is already registered, aborting...
[    9.475066] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.491225] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.557070] msm_tsens_get_temp: tsens mapping index not found
[    9.561890] msm_tsens_get_temp: tsens mapping index not found
[    9.567553] msm_tsens_get_temp: tsens mapping index not found
[    9.573468] msm_tsens_get_temp: tsens mapping index not found
[    9.577221] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[    9.586575] msm_tsens_get_temp: tsens mapping index not found
[    9.592246] msm_tsens_get_temp: tsens mapping index not found
[    9.622395] init: untracked pid 381 exited
[    9.714386] wcnss: no space available for smd frame
[    9.740351] wcnss: no space available for smd frame
[    9.770309] wcnss: no space available for smd frame
[    9.800193] ------------[ cut here ]------------
[    9.800232] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[    9.800240] Unbalanced enable for IRQ 330
[    9.800324] wcnss: no space available for smd frame
[    9.800487] ---[ end trace 01a43b38716dad66 ]---
[    9.833568] wcnss: not setting up vbatt
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[    0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
[    0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[    0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[    0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[    0.000000] cma: CMA: reserved 4 MiB at 1e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] IMEM DT static mapping successful
[    0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 107648
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 136MB 289MB = 425MB total
[    0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]      lowmem : 0xcde00000 - 0xe0000000   ( 290 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xcde00000   (  86 MB)
[    0.000000]      lowmem : 0xc0000000 - 0xc8800000   ( 136 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c4f41c   (12574 kB)
[    0.000000]       .init : 0xc0d00000 - 0xc0e12e00   (1100 kB)
[    0.000000]       .data : 0xc0e14000 - 0xc0ef8e08   ( 916 kB)
[    0.000000]        .bss : 0xc0ef8e2c - 0xc1113440   (2154 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000182] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000207] pid_max: default: 32768 minimum: 301
[    0.000491] Security Framework initialized
[    0.000544] SELinux:  Initializing.
[    0.000702] Mount-cache hash table entries: 512
[    0.001985] Initializing cgroup subsys debug
[    0.002002] Initializing cgroup subsys cpuacct
[    0.002014] Initializing cgroup subsys freezer
[    0.002071] CPU: Testing write buffer coherency: ok
[    0.002571] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002658] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.005166] Setting up static identity map for 0x8a42f0 - 0x8a4354
[    0.005204] Configuring XPU violations to be fatal errors
[    0.005218] MSM Memory Dump table set up
[    0.012615] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.018950] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.025288] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.025396] Brought up 4 CPUs
[    0.025416] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.039719] dummy:
[    0.056279] NET: Registered protocol family 16
[    0.068786] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.070903] KPI: Bootloader start count = 23312
[    0.070917] KPI: Bootloader end count = 51364
[    0.070927] KPI: Bootloader display count = 34143
[    0.070937] KPI: Bootloader load kernel count = 2449
[    0.070948] KPI: Kernel MPM timestamp = 79280
[    0.070958] KPI: Kernel MPM Clock frequency = 32768
[    0.070981] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[    0.070989]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[    0.085795] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[    0.090645] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[    0.121180] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[    0.121868] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.122550] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[    0.123218] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.123929] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[    0.124626] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[    0.125331] 8110_l1: 1225 mV normal idle
[    0.126051] 8110_l2: 1200 mV normal idle
[    0.126727] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[    0.127335] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[    0.127967] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[    0.128945] 8110_l4: 1200 mV normal idle
[    0.129602] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[    0.130285] 8110_l6: 1800 mV normal idle
[    0.130978] 8110_l7: 2050 mV normal idle
[    0.131692] 8110_l8: 1800 mV normal idle
[    0.132369] 8110_l9: 2050 mV normal idle
[    0.133086] 8110_l10: 1800 mV normal idle
[    0.133730] 8110_l10_ao: 1800 mV normal idle
[    0.134388] 8110_l10_so: 1800 mV normal idle
[    0.135034] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.136054] 8110_l14: 1800 mV normal idle
[    0.136768] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.137441] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[    0.138128] 8110_l17: 2900 mV normal idle
[    0.138836] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.139508] 8110_l19: 2850 mV normal idle
[    0.140213] 8110_l20: 3075 mV normal idle
[    0.140913] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.141589] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.143226] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[    0.143602] vdd_restriction_reg_init:Defer vdd rstr freq init
[    0.169372] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.169391] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.170081] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[    0.172114] 8110_s2: 900 <--> 1275 mV at 1150 mV
[    0.172369] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[    0.173811] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[    0.173853] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[    0.173868] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[    0.173881] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[    0.173945] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.173990] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[    0.174004] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[    0.174363] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174414] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[    0.174434] cpr_init_cpr_efuse: disable = 0, local = 1
[    0.174447] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[    0.174461] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[    0.174474] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[    0.174530] cpr_init_cpr_parameters: CPR is enabled by default.
[    0.174551] cpr_config: Timer count: 0x17700 (for 5000 us)
[    0.174885] apc_corner: 0 <--> 0 mV
[    0.177526] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.178791] kworker/u:1 used greatest stack depth: 6144 bytes left
[    0.180571] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.182604] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.184943] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.188836] sps:sps is ready.
[    0.190562] gdsc_vfe:
[    0.191009] gdsc_oxili_cx:
[    0.191640] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.193004] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[    0.194129] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[    0.195011] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[    0.196529] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[    0.197265] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[    0.229891] bio: create slab <bio-0> at 0
[    0.231108] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[    0.231714] ION heap vmalloc created
[    0.231873] ION heap kmalloc created
[    0.231934] ION heap iommu created
[    0.231963] ION heap qsecom created
[    0.232000] ION heap pil_1 created at 0x0c500000 with size 1300000
[    0.232045] ION heap pil_2 created at 0x08800000 with size 3d00000
[    0.233507] Linux media interface: v0.10
[    0.233600] Linux video capture interface: v2.00
[    0.235275] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[    0.236446] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[    0.238800] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[    0.239591] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[    0.240303] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[    0.241307] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[    0.241755] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[    0.242963] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[    0.243147] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[    0.243366] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[    0.243596] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[    0.243809] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[    0.243994] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[    0.244321] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[    0.244740] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[    0.244930] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[    0.245113] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[    0.245367] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[    0.245552] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[    0.245804] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[    0.245989] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[    0.246201] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[    0.246386] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[    0.246701] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[    0.246986] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[    0.247177] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[    0.247443] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[    0.247619] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.248478] Bluetooth: Core ver 2.16
[    0.248550] NET: Registered protocol family 31
[    0.248561] Bluetooth: HCI device and connection manager initialized
[    0.248577] Bluetooth: HCI socket layer initialized
[    0.248590] Bluetooth: L2CAP socket layer initialized
[    0.248913] Bluetooth: SCO socket layer initialized
[    0.249355] cfg80211: Calling CRDA to update world regulatory domain
[    0.249407] cfg80211: World regulatory domain updated:
[    0.249419] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.249436] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249451] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249467] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.249483] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249498] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.250153] Switching to clocksource arch_sys_counter
[    0.303556] NET: Registered protocol family 2
[    0.304020] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.305461] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.308748] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.309193] TCP: Hash tables configured (established 16384 bind 16384)
[    0.309207] TCP: reno registered
[    0.309322] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.309456] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.309893] NET: Registered protocol family 1
[    0.310550] Trying to unpack rootfs image as initramfs...
[    0.353712] Freeing initrd memory: 448K
[    0.359246] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[    0.360322] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[    0.360529] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[    0.361539] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[    0.361745] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[    0.362771] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[    0.363017] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[    0.364086] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[    0.364293] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[    0.365354] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[    0.365599] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[    0.366686] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[    0.366904] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[    0.368026] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[    0.369644] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[    0.374499] pil_pronto fb21b000.qcom,pronto: using secure boot
[    0.383717] NET: Registered protocol family 27
[    0.386336] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[    0.391565] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[    0.391873] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[    0.393085] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[    0.393117] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[    0.393504] msm_rpm_log_probe: OK
[    0.405637] audit: initializing netlink socket (disabled)
[    0.405688] type=2000 audit(0.390:1): initialized
[    0.523502] fuse init (API version 7.18)
[    0.523996] msgmni has been set to 792
[    0.526105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.526118] io scheduler noop registered
[    0.526126] io scheduler deadline registered
[    0.526144] io scheduler row registered
[    0.526312] io scheduler cfq registered (default)
[    0.526321] io scheduler test-iosched registered
[    0.526607] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[    0.526696] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[    0.526787] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[    0.526867] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[    0.527001] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[    0.527323] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[    0.527447] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[    0.529503] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[    0.529732] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[    0.529742] mdss_dsi_panel_init:989 Partial update disabled.
[    0.529798] dsi_parse_gpio:156, Disp_en gpio not specified
[    0.530323] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[    0.562500] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[    0.604291] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.604313] AXI: get_pdata(): Error: Client name not found
[    0.604322] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    0.604330] msm_serial_hsl_probe: Bus scaling is disabled
[    0.604464] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[    0.604526] msm_hsl_console_setup: console setup on port #0
[    2.165077] console [ttyHSL0] enabled
[    2.169101] msm_serial_hsl_init: driver initialized
[    2.177538] diagchar initialized now
[    2.182473] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    2.199295] brd: module loaded
[    2.205109] loop: module loaded
[    2.207646] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[    2.212101] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[    2.217623] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[    2.223261] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[    2.231369] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    2.237674] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    2.244543] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    2.251326] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    2.258689] sps: BAM device 0xf9904000 is not registered yet.
[    2.263926] sps:BAM 0xf9904000 is registered.
[    2.268365] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[    2.276391] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[    2.283785] tun: Universal TUN/TAP device driver, 1.6
[    2.287792] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.294074] rmnet_init: BAM devices[9]
[    2.306051] PPP generic driver version 2.4.2
[    2.309428] PPP BSD Compression module registered
[    2.314002] PPP Deflate Compression module registered
[    2.319784] PPP MPPE Compression module registered
[    2.323804] NET: Registered protocol family 24
[    2.328518] wcnss_wlan probed in built-in mode
[    2.334939] msm_otg f9a55000.usb: msm_otg probe
[    2.338885] msm_otg f9a55000.usb: OTG regs = c8942000
[    2.346426] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    2.351360] msm_otg f9a55000.usb: phy_reset: success
[    2.356953] mbim_init: initialize 1 instances
[    2.360730] mbim_init: Initialized 1 ports
[    2.366671] rndis_qc_init: initialize rndis QC instance
[    2.371546] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.377711] android_usb gadget: Number of LUNs=3
[    2.382340]  lun0: LUN: removable file: (no medium)
[    2.387172]  lun1: LUN: removable read only CD-ROM file: (no medium)
[    2.393529]  lun2: LUN: removable file: (no medium)
[    2.398707] android_usb gadget: android_usb ready
[    2.404515] [himax] himax_ts_init
[    2.406829] wxun: himax_ts_probe: irq set here
[    2.411410] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[    2.417466] wxun: himax_ts_probe: reset set here
[    2.422174] ------------[ cut here ]------------
[    2.426762] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    2.437427] autorequest GPIO-0
[    2.440465] Modules linked in:
[    2.443521] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    2.452973] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    2.462521] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    2.472159] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    2.482229] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[    2.491864] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    2.500977] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    2.510437] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    2.519814] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    2.528841] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    2.537868] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    2.546897] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    2.556272] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    2.565733] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    2.574589] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    2.583371] ---[ end trace 06c5b712ff615628 ]---
[    2.660254] msm_thermal: Limiting cpu0 max frequency to 787200
[    2.665590] msm_thermal: Limiting cpu1 max frequency to 787200
[    2.671044] msm_thermal: Limiting cpu2 max frequency to 787200
[    2.676705] cpr_irq_handler: IRQ_STATUS = 0x45
[    2.676837] msm_thermal: Limiting cpu3 max frequency to 787200
[    2.686956] cpr_scale: last_volt[corner:2] = 1050000 uV
[    2.692150] cpr_scale: Down: cpr status = 0x00003679 (error_steps=14)
[    2.698554] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[    2.910749] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    2.916605] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.940394] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.946338] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.970387] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.976330] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.000253] [TP] i2c_himax_read: i2c_read_block retry over 3
[    3.004872] himax_ts_probe other driver has been loaded
[    3.010199] msg26xx: msg26xx_ts_init
[    3.013725] msg26xx: TPD probe
[    3.016677] ------------[ cut here ]------------
[    3.021287] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    3.031954] autorequest GPIO-0
[    3.034991] Modules linked in:
[    3.038044] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    3.047503] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    3.057052] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    3.066690] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    3.076758] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[    3.085872] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    3.094465] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    3.103925] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    3.113302] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    3.122329] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    3.131355] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    3.140385] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    3.149759] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    3.159220] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    3.168076] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    3.176834] ---[ end trace 06c5b712ff615629 ]---
[    3.520394] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.526341] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.532614] _msg_WriteI2CSeq error -107,addr = 38
[    3.537255] msg26xx: _msg_GetVersion ret = -107
[    3.570386] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.576329] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.582604] _msg_WriteI2CSeq error -107,addr = 38
[    3.587245] msg26xx: _msg_GetVersion ret = -107
[    3.620386] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.626329] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.632602] _msg_WriteI2CSeq error -107,addr = 38
[    3.637245] msg26xx: _msg_GetVersion ret = -107
[    3.670251] msg26xx:  may be there is not msg26xx tp
[    3.674195] msg26xx: probe of 1-0026 failed with error 19
[    3.679692] FTS: ft5x0x_ts_probe enter
[    3.683399] FTS: irq = 330
[    4.111150] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[    4.117857] input: ft5x0x_ts as /devices/virtual/input/input0
[    4.280478] ft5x0x_ts 1-0038: Create proc entry success!
[    4.285208] FTS:  Firmware version = 0xb
[    4.289106] FTS:  report rate is 100Hz.
[    4.292957] FTS:  touch threshold is 48.
[    4.296695] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[    4.303867] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[    4.310313] Successfully added driver ft5x0x_ts
[    4.314699] ctp_selftest_init
[    4.317769] create_proc_entry g_ctp_selftest_proc success
[    4.323064] ctp_upgrade_init
[    4.326008] [elan] create_proc_entry 222 success
[    4.330539] create_proc_entry success
[    4.334142] ctp_if_upgrade_init
[    4.337380] ctp_if_upgrade_init create_proc_entry 222 success
[    4.343039] create_proc_entry success
[    4.346651] create_proc_entry success
[    4.350391] bma2x2_probe:
[    4.380811] bma2x2_probe: chipid=20f8
[    4.383760] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[    4.391273] bma2x2_disable,start
[    4.395267] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1414, h:m:s == 0:23:34, d/m/y = 1/0/70
[    4.402587] qcom,qpnp-rtc qpnp-rtc-de539800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[    4.410488] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1414, h:m:s == 0:23:34, d/m/y = 1/0/70
[    4.419120] using rtc device, qpnp_rtc, for alarms
[    4.423336] qcom,qpnp-rtc qpnp-rtc-de539800: rtc core: registered qpnp_rtc as rtc0
[    4.431279] qcom,qpnp-rtc qpnp-rtc-de539800: Probe success !!
[    4.436789] i2c /dev entries driver
[    4.449500] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.455409] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.462541] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.469022] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.476749] s5k4e1_init_module:153
[    4.479653] s5k4e1_init_module:158 rc -19
[    4.484467] zgc2235_init_module:141
[    4.487442] zgc2235_init_module:146 rc -19
[    4.491081] msm_sensor_i2c_probe gc2235_i2c_probe called
[    4.496290] msm_sensor_i2c_probe: of_node exisists
[    4.500928] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[    4.507058] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[    4.512641] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[    4.518515] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[    4.524273] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[    4.529714] msm_sensor_get_sub_module_index:75 src_node NULL
[    4.535384] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[    4.541654] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[    4.548727] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[    4.554572] msm_sensor_get_sub_module_index csid_core[0] = 1
[    4.560184] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[    4.566548] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[    4.572622] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[    4.578760] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[    4.584601] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[    4.590329] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[    4.596121] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[    4.601787] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[    4.607402] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[    4.613074] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[    4.619816] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[    4.626612] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[    4.633386] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[    4.640127] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[    4.646926] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[    4.653699] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[    4.660006] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[    4.666369] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[    4.672672] msm_sensor_get_dt_data gpio count 3
[    4.677118] msm_sensor_get_dt_data gpio_array[0] = 13
[    4.682237] msm_sensor_get_dt_data gpio_array[1] = 15
[    4.687193] msm_sensor_get_dt_data gpio_array[2] = 85
[    4.692252] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[    4.698895] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[    4.705607] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[    4.712292] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[    4.718947] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[    4.725658] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[    4.732344] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[    4.739783] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[    4.747190] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[    4.754747] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[    4.760297] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[    4.765837] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[    4.772886] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[    4.779280] msm_sensor_power_up:991
[    4.782798] msm_sensor_power_up index 0
[    4.786567] msm_sensor_power_up type 2
[    4.801802] msm_sensor_power_up index 1
[    4.804598] msm_sensor_power_up type 2
[    4.819755] msm_sensor_power_up index 2
[    4.822582] msm_sensor_power_up type 2
[    4.837630] msm_sensor_power_up index 3
[    4.840457] msm_sensor_power_up type 0
[    4.850238] msm_sensor_power_up index 4
[    4.853032] msm_sensor_power_up type 1
[    4.900257] msm_sensor_power_up index 5
[    4.903050] msm_sensor_power_up type 1
[    4.950254] msm_sensor_power_up index 6
[    4.953049] msm_sensor_power_up type 1
[    5.000253] msm_sensor_power_up index 7
[    5.003047] msm_sensor_power_up type 1
[    5.050277] msm_sensor_power_up index 8
[    5.053071] msm_sensor_power_up type 3
[    5.057107] qup_i2c f9928000.i2c: QUP: I2C status flags :0x1363c8, irq:132
[    5.063691] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[    5.069929] msm_sensor_match_id: gc2235: read id failed
[    5.075153] msm_sensor_power_up:1095 match id failed rc -107
[    5.080790] msm_sensor_power_up:1102 failed
[    5.084930] msm_sensor_power_up index 8
[    5.088748] msm_sensor_power_up type 3
[    5.092508] msm_sensor_power_up index 7
[    5.096300] msm_sensor_power_up type 1
[    5.140256] msm_sensor_power_up index 6
[    5.143051] msm_sensor_power_up type 1
[    5.190248] msm_sensor_power_up index 5
[    5.193044] msm_sensor_power_up type 1
[    5.240254] msm_sensor_power_up index 4
[    5.243049] msm_sensor_power_up type 1
[    5.290373] msm_sensor_power_up index 3
[    5.293168] msm_sensor_power_up type 0
[    5.302948] msm_sensor_power_up index 2
[    5.305744] msm_sensor_power_up type 2
[    5.320806] msm_sensor_power_up index 1
[    5.323602] msm_sensor_power_up type 2
[    5.338689] msm_sensor_power_up index 0
[    5.341517] msm_sensor_power_up type 2
[    5.356582] msm_sensor_i2c_probe gc2235 power up failed
[    5.360813] gc2235: probe of 6-0078 failed with error -107
[    5.370752] lirc_dev: IR Remote Control driver registered, major 241
[    5.376157] IR NEC protocol handler initialized
[    5.380703] IR RC5(x) protocol handler initialized
[    5.385444] IR RC6 protocol handler initialized
[    5.389957] IR JVC protocol handler initialized
[    5.394500] IR Sony protocol handler initialized
[    5.399073] IR RC5 (streamzap) protocol handler initialized
[    5.404655] IR SANYO protocol handler initialized
[    5.409315] IR MCE Keyboard/mouse protocol handler initialized
[    5.415159] IR LIRC bridge handler initialized
[    5.420388] BMS: qpnp_bms_init: QPNP BMS INIT
[    5.424006] spmi qpnp-bms-de539600: Driver qcom,qpnp-bms requests probe deferral
[    5.431585] spmi qpnp-charger-de538800: Driver qcom,qpnp-charger requests probe deferral
[    5.478450] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    5.487601] cpuidle: using governor ladder
[    5.491616] cpuidle: using governor menu
[    5.494622] sdhci: Secure Digital Host Controller Interface driver
[    5.500758] sdhci: Copyright(c) Pierre Ossman
[    5.505709] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.511298] AXI: get_pdata(): Error: Client name not found
[    5.516179] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.525238] mmc0: no vmmc regulator found
[    5.530724] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[    5.536778] AXI: get_pdata(): Error: Client name not found
[    5.541893] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.551277] mmc1: no vmmc regulator found
[    5.556721] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[    5.565037] zram: Created 1 device(s) ...
[    5.573016] ashmem: initialized
[    5.575292] logger: created 256K log 'log_main'
[    5.581827] logger: created 256K log 'log_events'
[    5.587646] logger: created 256K log 'log_radio'
[    5.593423] logger: created 256K log 'log_system'
[    5.604023] sps:BAM 0xf9a44000 is registered.
[    5.609201] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    5.619953] PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
[    5.628853] input: qpnp_pon as /devices/virtual/input/input3
[    5.635105] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[    5.639619] coresight-fuse fc4be024.fuse: Fuse initialized
[    5.645446] coresight-cti fc310000.cti: CTI initialized
[    5.650083] coresight-cti fc311000.cti: CTI initialized
[    5.655346] coresight-cti fc312000.cti: CTI initialized
[    5.660577] coresight-cti fc313000.cti: CTI initialized
[    5.665710] coresight-cti fc314000.cti: CTI initialized
[    5.670985] coresight-cti fc315000.cti: CTI initialized
[    5.676165] coresight-cti fc316000.cti: CTI initialized
[    5.681477] coresight-cti fc317000.cti: CTI initialized
[    5.686596] coresight-cti fc318000.cti: CTI initialized
[    5.691840] coresight-cti fc351000.cti: CTI initialized
[    5.696994] coresight-cti fc352000.cti: CTI initialized
[    5.702233] coresight-cti fc353000.cti: CTI initialized
[    5.707381] coresight-cti fc354000.cti: CTI initialized
[    5.712466] mmc0: BKOPS_EN bit = 0
[    5.712712] coresight-cti fc335000.cti: CTI initialized
[    5.712939] coresight-cti fc338000.cti: CTI initialized
[    5.713173] coresight-cti fc33c000.cti: CTI initialized
[    5.713393] coresight-cti fc360000.cti: CTI initialized
[    5.714080] coresight-csr fc301000.csr: CSR initialized
[    5.745597] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[    5.751080] sps:BAM 0xfc37c000 is registered.
[    5.755538] coresight-tmc fc326000.tmc: TMC initialized
[    5.761503] coresight-tmc fc325000.tmc: TMC initialized
[    5.766932] coresight-tpiu fc320000.tpiu: seta gpios not specified
[    5.772135] coresight-tpiu fc320000.tpiu: setb gpios not specified
[    5.778405] coresight-tpiu fc320000.tpiu: TPIU initialized
[    5.783823] mmc0: new HS200 MMC card at address 0001
[    5.784486] coresight-funnel fc323000.funnel: FUNNEL initialized
[    5.784704] coresight-funnel fc321000.funnel: FUNNEL initialized
[    5.784923] coresight-funnel fc322000.funnel: FUNNEL initialized
[    5.785140] coresight-funnel fc355000.funnel: FUNNEL initialized
[    5.785834] coresight-replicator fc324000.replicator: REPLICATOR initialized
[    5.786735] coresight-stm fc302000.stm: STM initialized
[    5.787469] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[    5.788495] coresight-etm fc34c000.etm: ETM initialized
[    5.837979] coresight-etm fc34d000.etm: ETM initialized
[    5.842952] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[    5.843433] coresight-etm fc34e000.etm: ETM initialized
[    5.843933] coresight-etm fc34f000.etm: ETM initialized
[    5.844750] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[    5.845460] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[    5.846167] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[    5.846861] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[    5.848503] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    5.848532] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    5.859499] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[    5.860373] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    5.861549] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    5.862137] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    5.866499] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    5.866982] Netfilter messages via NETLINK v0.30.
[    5.867099] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[    5.868221] ctnetlink v0.93: registering with nfnetlink.
[    5.868744] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    5.868756] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    5.869178] xt_time: kernel timezone is -0000
[    5.869798] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.870339] arp_tables: (C) 2002 David S. Miller
[    5.870444] TCP: cubic registered
[    5.871677] NET: Registered protocol family 10
[    5.876601] Mobile IPv6
[    5.876662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.876959] IPv6 over IPv4 tunneling driver
[    5.877915] NET: Registered protocol family 17
[    5.878055] Bridge firewalling registered
[    5.878079] Ebtables v2.0 registered
[    6.008897] Bluetooth: RFCOMM TTY layer initialized
[    6.013736] Bluetooth: RFCOMM socket layer initialized
[    6.013779] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[    6.017368]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[    6.033711] Bluetooth: RFCOMM ver 1.11
[    6.037353] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.042676] Bluetooth: BNEP filters: protocol multicast
[    6.047859] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.054432] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    6.061462] Registering SWP/SWPB emulation handler
[    6.074551] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.081146] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.082869] input: gpio-keys as /devices/gpio_keys.60/input/input4
[    6.083523] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.102231] qcom,qpnp-rtc qpnp-rtc-de539800: setting system clock to 1970-01-01 00:23:35 UTC (1415)
[    6.102248] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.102277] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.102618] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.102630] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.102653] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.102769] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.102792] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.108020] batfet:
[    6.119363] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[    6.153746] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.186016] msm_otg f9a55000.usb: USB in low power mode
[    6.188426] clock_late_init: Removing enables held for handed-off clocks
[    6.201429] ALSA device list:
[    6.203370]   No soundcards found.
[    6.205590] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/7    6.216017] Freeing init memory: 72K
[    6.232980] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.240380] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.248752] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.285278] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.292679] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.305394] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.314984] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1415, h:m:s == 0:23:35, d/m/y = 1/0/70
[    6.320474] type=1403 audit(1415.730:2): policy loaded auid=4294967295 ses=4294967295
[    6.321195] SELinux: Loaded policy from (null)
[    6.331563] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[    6.332664] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[    6.336549] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    6.344636] init: invalid uid 'fm_radio'
[    6.411147] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[    6.418504] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[    6.429547] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[    6.457385] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[    6.464811] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3956604 ocv = 4067547 r_sense_uohm = 9406 warm_reset = 0
[    6.477211] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.483608] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.489503] qcom,qpnp-rtc qpnp-rtc-de539800: secs = 1416, h:m:s == 0:23:36, d/m/y = 1/0/70
[    6.499540] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.507796] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.514666] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.522355] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.680326] msm_thermal: Max frequency reset for cpu0
[    6.686339] msm_thermal: Max frequency reset for cpu1
[    6.690562] msm_thermal: Max frequency reset for cpu2
[    6.695549] msm_thermal: Max frequency reset for cpu3
[    7.015490] init: cannot open '/initlogo.rle'
[    7.122366] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.188274] EXT4-fs (mmcblk0p22): recovery complete
[    7.193048] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    7.210308] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[    7.257463] e2fsck used greatest stack depth: 5328 bytes left
[    7.262256] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    7.266788] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49696/524288 blocks
[    7.284196] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    7.299395] EXT4-fs (mmcblk0p14): recovery complete
[    7.304242] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.312340] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[    7.321675] EXT4-fs (mmcblk0p21): recovery complete
[    7.326488] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[    7.333921] SELinux:  Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[    7.347652] EXT4-fs (mmcblk0p13): recovery complete
[    7.352410] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.415427] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    7.425395] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[    7.443292] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[    7.524813] ueventd used greatest stack depth: 5284 bytes left
[    7.653313] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[    7.705607] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    7.719047] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[    7.728251] apr_tal:Q6 Is Up
[    7.730313] diag: In diag_send_msg_mask_update, invalid status 0
[    7.730383] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[    7.732282] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    7.732497] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[    7.732700] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    7.732707]
[    7.732734] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[    7.732740]
[    7.732761] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[    7.732767]
[    7.732789] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[    7.732795]
[    7.732827] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[    7.732833]
[    7.737726] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[    7.744131] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[    7.746954] wcd9xxx_resmgr_init
[    7.767569] wcd9xxx_mbhc_init: enter
[    7.773724] wcd9xxx_mbhc_init: leave ret 0
[    7.815138] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    7.815156] wcd9xxx_event_notify: leave
[    7.816346] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    7.816354] wcd9xxx_event_notify: leave
[    7.817460] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    7.817472] wcd9xxx_event_notify: leave
[    7.818594] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    7.818607] wcd9xxx_event_notify: leave
[    7.822794] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[    7.823774] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[    7.824627] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[    7.825392] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[    7.826219] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[    7.827066] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[    7.827843] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[    7.828406] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[    7.828962] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[    7.829694] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[    7.830560] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[    7.831404] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[    7.832310] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[    7.833406] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[    7.834337] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[    7.835194] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[    7.835643] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[    7.836647] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[    7.837241] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[    7.837797] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[    7.838366] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[    7.838922] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[    7.839598] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[    7.840211] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[    7.841050] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[    7.841642] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[    7.842419] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[    7.853912] input: Button Jack as /devices/sound.37/sound/card0/input5
[    7.854403] input: Headset Jack as /devices/sound.37/sound/card0/input6
[    8.061940] diag: In diag_send_log_mask_update, invalid status 0
[    8.203470] wcnss_wlan triggered by userspace
[    8.236982] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.244951] wcnss_trigger_config:  adc get failed
[    8.252781] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[    8.264061] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[    8.270007] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[    8.376292] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[    8.388350] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [    8.521034] cp used greatest stack depth: 5068 bytes left
[    9.076099] diag: In diag_send_msg_mask_update, invalid status 0
[    9.084693] diag: In diag_send_log_mask_update, invalid status 0
[    9.181276] msm_isp_close_node: halt timeout rc=0
[    9.183932] init: untracked pid 274 exited
[    9.187833] enable_store: android_usb: already disabled
[    9.200077] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.211279] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.222024] Error: Driver 'DS' is already registered, aborting...
[    9.227161] msm_tsens_get_temp: tsens mapping index not found
[    9.233031] msm_tsens_get_temp: tsens mapping index not found
[    9.238597] msm_tsens_get_temp: tsens mapping index not found
[    9.244739] msm_tsens_get_temp: tsens mapping index not found
[    9.250024] msm_tsens_get_temp: tsens mapping index not found
[    9.255966] msm_tsens_get_temp: tsens mapping index not found
[    9.278578] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=db065480
[    9.362807] wcnss: no space available for smd frame
[    9.390377] wcnss: no space available for smd frame
[    9.403293] init: untracked pid 381 exited
[    9.420415] wcnss: no space available for smd frame
[    9.450442] wcnss: no space available for smd frame
[    9.482566] wcnss: not setting up vbatt
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[    0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
[    0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[    0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[    0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[    0.000000] cma: CMA: reserved 4 MiB at 1e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] IMEM DT static mapping successful
[    0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 107648
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 136MB 289MB = 425MB total
[    0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]      lowmem : 0xcde00000 - 0xe0000000   ( 290 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xcde00000   (  86 MB)
[    0.000000]      lowmem : 0xc0000000 - 0xc8800000   ( 136 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c4f41c   (12574 kB)
[    0.000000]       .init : 0xc0d00000 - 0xc0e12e00   (1100 kB)
[    0.000000]       .data : 0xc0e14000 - 0xc0ef8e08   ( 916 kB)
[    0.000000]        .bss : 0xc0ef8e2c - 0xc1113440   (2154 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000181] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000205] pid_max: default: 32768 minimum: 301
[    0.000485] Security Framework initialized
[    0.000540] SELinux:  Initializing.
[    0.000694] Mount-cache hash table entries: 512
[    0.001992] Initializing cgroup subsys debug
[    0.002008] Initializing cgroup subsys cpuacct
[    0.002020] Initializing cgroup subsys freezer
[    0.002074] CPU: Testing write buffer coherency: ok
[    0.002576] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002663] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.005175] Setting up static identity map for 0x8a42f0 - 0x8a4354
[    0.005213] Configuring XPU violations to be fatal errors
[    0.005227] MSM Memory Dump table set up
[    0.012610] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.018937] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.025255] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.025362] Brought up 4 CPUs
[    0.025381] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.039687] dummy:
[    0.056256] NET: Registered protocol family 16
[    0.068835] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.070979] KPI: Bootloader start count = 23237
[    0.070992] KPI: Bootloader end count = 51289
[    0.071002] KPI: Bootloader display count = 34066
[    0.071012] KPI: Bootloader load kernel count = 2449
[    0.071023] KPI: Kernel MPM timestamp = 79212
[    0.071033] KPI: Kernel MPM Clock frequency = 32768
[    0.071057] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[    0.071065]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[    0.085872] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[    0.090717] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[    0.121286] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[    0.121979] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.122653] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[    0.123318] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.124037] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[    0.124737] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[    0.125441] 8110_l1: 1225 mV normal idle
[    0.126161] 8110_l2: 1200 mV normal idle
[    0.126838] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[    0.127443] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[    0.128081] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[    0.129067] 8110_l4: 1200 mV normal idle
[    0.129726] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[    0.130408] 8110_l6: 1800 mV normal idle
[    0.131099] 8110_l7: 2050 mV normal idle
[    0.131806] 8110_l8: 1800 mV normal idle
[    0.132486] 8110_l9: 2050 mV normal idle
[    0.133208] 8110_l10: 1800 mV normal idle
[    0.133853] 8110_l10_ao: 1800 mV normal idle
[    0.134503] 8110_l10_so: 1800 mV normal idle
[    0.135151] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.136176] 8110_l14: 1800 mV normal idle
[    0.136896] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.137569] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[    0.138254] 8110_l17: 2900 mV normal idle
[    0.138965] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.139638] 8110_l19: 2850 mV normal idle
[    0.140344] 8110_l20: 3075 mV normal idle
[    0.141039] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.141714] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.143338] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[    0.143712] vdd_restriction_reg_init:Defer vdd rstr freq init
[    0.169526] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.169545] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.170236] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[    0.172268] 8110_s2: 900 <--> 1275 mV at 1150 mV
[    0.172526] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[    0.173967] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[    0.174008] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[    0.174022] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[    0.174036] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[    0.174100] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174146] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[    0.174160] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[    0.174520] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174571] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[    0.174592] cpr_init_cpr_efuse: disable = 0, local = 1
[    0.174606] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[    0.174619] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[    0.174633] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[    0.174688] cpr_init_cpr_parameters: CPR is enabled by default.
[    0.174709] cpr_config: Timer count: 0x17700 (for 5000 us)
[    0.175041] apc_corner: 0 <--> 0 mV
[    0.177674] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.178942] kworker/u:1 used greatest stack depth: 6144 bytes left
[    0.180704] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.182749] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.185070] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.188937] sps:sps is ready.
[    0.190664] gdsc_vfe:
[    0.191112] gdsc_oxili_cx:
[    0.191741] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.193140] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[    0.194222] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[    0.195109] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[    0.196632] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[    0.197368] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[    0.229947] bio: create slab <bio-0> at 0
[    0.231158] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[    0.231762] ION heap vmalloc created
[    0.231927] ION heap kmalloc created
[    0.231987] ION heap iommu created
[    0.232017] ION heap qsecom created
[    0.232053] ION heap pil_1 created at 0x0c500000 with size 1300000
[    0.232098] ION heap pil_2 created at 0x08800000 with size 3d00000
[    0.233571] Linux media interface: v0.10
[    0.233664] Linux video capture interface: v2.00
[    0.235344] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[    0.236509] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[    0.238869] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[    0.239657] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[    0.240368] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[    0.241370] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[    0.241814] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[    0.243071] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[    0.243358] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[    0.243564] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[    0.243820] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[    0.244054] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[    0.244261] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[    0.244640] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[    0.245076] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[    0.245287] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[    0.245495] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[    0.245709] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[    0.245915] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[    0.246156] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[    0.246363] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[    0.246586] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[    0.246804] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[    0.247135] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[    0.247524] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[    0.247739] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[    0.248030] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[    0.248355] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.249485] Bluetooth: Core ver 2.16
[    0.249639] NET: Registered protocol family 31
[    0.249651] Bluetooth: HCI device and connection manager initialized
[    0.249667] Bluetooth: HCI socket layer initialized
[    0.249680] Bluetooth: L2CAP socket layer initialized
[    0.250041] Bluetooth: SCO socket layer initialized
[    0.250463] cfg80211: Calling CRDA to update world regulatory domain
[    0.250514] cfg80211: World regulatory domain updated:
[    0.250526] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.250543] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.250559] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.250574] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.250590] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.250605] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.251274] Switching to clocksource arch_sys_counter
[    0.304689] NET: Registered protocol family 2
[    0.305139] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.306664] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.309923] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.310368] TCP: Hash tables configured (established 16384 bind 16384)
[    0.310382] TCP: reno registered
[    0.310500] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.310630] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.311090] NET: Registered protocol family 1
[    0.311730] Trying to unpack rootfs image as initramfs...
[    0.354978] Freeing initrd memory: 448K
[    0.360483] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[    0.361541] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[    0.361762] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[    0.362742] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[    0.362945] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[    0.363981] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[    0.364224] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[    0.365327] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[    0.365536] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[    0.366612] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[    0.366847] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[    0.367952] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[    0.368157] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[    0.369290] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[    0.370917] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[    0.375860] pil_pronto fb21b000.qcom,pronto: using secure boot
[    0.385177] NET: Registered protocol family 27
[    0.387726] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[    0.392896] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[    0.393197] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[    0.394409] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[    0.394442] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[    0.394828] msm_rpm_log_probe: OK
[    0.406769] audit: initializing netlink socket (disabled)
[    0.406821] type=2000 audit(0.390:1): initialized
[    0.524584] fuse init (API version 7.18)
[    0.525062] msgmni has been set to 792
[    0.527553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.527566] io scheduler noop registered
[    0.527574] io scheduler deadline registered
[    0.527593] io scheduler row registered
[    0.527772] io scheduler cfq registered (default)
[    0.527780] io scheduler test-iosched registered
[    0.528065] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[    0.528153] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[    0.528234] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[    0.528314] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[    0.528448] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[    0.528778] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[    0.528912] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[    0.530890] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[    0.531116] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[    0.531127] mdss_dsi_panel_init:989 Partial update disabled.
[    0.531184] dsi_parse_gpio:156, Disp_en gpio not specified
[    0.531761] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[    0.563791] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[    0.605613] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.605635] AXI: get_pdata(): Error: Client name not found
[    0.605644] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    0.605651] msm_serial_hsl_probe: Bus scaling is disabled
[    0.605774] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[    0.605837] msm_hsl_console_setup: console setup on port #0
[    1.901375] msm_thermal: Limiting cpu0 max frequency to 787200
[    1.901974] msm_thermal: Limiting cpu1 max frequency to 787200
[    1.902127] msm_thermal: Limiting cpu2 max frequency to 787200
[    1.902279] msm_thermal: Limiting cpu3 max frequency to 787200
[    2.151452] msm_thermal: Limiting cpu0 max frequency to 384000
[    2.151939] msm_thermal: Limiting cpu1 max frequency to 384000
[    2.152251] msm_thermal: Limiting cpu2 max frequency to 384000
[    2.152562] msm_thermal: Limiting cpu3 max frequency to 384000
[    2.166399] cpr_irq_handler: IRQ_STATUS = 0x05
[    2.166423] cpr_scale: last_volt[corner:1] = 1050000 uV
[    2.166445] cpr_scale: Down: cpr status = 0x00006dfd (error_steps=15)
[    2.166469] cpr_scale: [corn:1] @ floor: 1050000 <= 1050000: NACK
[    2.235016] console [ttyHSL0] enabled
[    2.239801] msm_serial_hsl_init: driver initialized
[    2.255636] diagchar initialized now
[    2.265243] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    2.304674] brd: module loaded
[    2.318412] loop: module loaded
[    2.321709] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[    2.325566] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[    2.331119] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[    2.336889] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[    2.345807] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    2.351811] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    2.358863] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    2.365431] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    2.373690] sps: BAM device 0xf9904000 is not registered yet.
[    2.378430] sps:BAM 0xf9904000 is registered.
[    2.383451] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[    2.391632] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[    2.400377] tun: Universal TUN/TAP device driver, 1.6
[    2.404458] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.410828] rmnet_init: BAM devices[9]
[    2.439869] PPP generic driver version 2.4.2
[    2.443587] PPP BSD Compression module registered
[    2.447802] PPP Deflate Compression module registered
[    2.455012] PPP MPPE Compression module registered
[    2.458784] NET: Registered protocol family 24
[    2.464088] wcnss_wlan probed in built-in mode
[    2.474704] msm_otg f9a55000.usb: msm_otg probe
[    2.479217] msm_otg f9a55000.usb: OTG regs = c8942000
[    2.489672] msm_otg f9a55000.usb: phy_reset: success
[    2.494647] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    2.501536] mbim_init: initialize 1 instances
[    2.505139] mbim_init: Initialized 1 ports
[    2.515186] rndis_qc_init: initialize rndis QC instance
[    2.521408] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.527265] android_usb gadget: Number of LUNs=3
[    2.531932]  lun0: LUN: removable file: (no medium)
[    2.536728]  lun1: LUN: removable read only CD-ROM file: (no medium)
[    2.543128]  lun2: LUN: removable file: (no medium)
[    2.549000] android_usb gadget: android_usb ready
[    2.556801] [himax] himax_ts_init
[    2.559173] wxun: himax_ts_probe: irq set here
[    2.563773] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[    2.569774] wxun: himax_ts_probe: reset set here
[    2.574506] ------------[ cut here ]------------
[    2.579085] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    2.589729] autorequest GPIO-0
[    2.592768] Modules linked in:
[    2.595842] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    2.605291] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    2.614841] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    2.624479] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    2.634547] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[    2.644179] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    2.653294] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    2.662753] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    2.672132] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    2.681159] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    2.690184] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    2.699214] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    2.708589] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    2.718049] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    2.726905] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    2.735696] ---[ end trace 9fe215f2a85bcb15 ]---
[    3.062293] qup_i2c f9923000.i2c: QUP: I2C status flags :0x81343c8, irq:127
[    3.068279] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.091606] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.097501] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.121600] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.127495] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.151475] [TP] i2c_himax_read: i2c_read_block retry over 3
[    3.156110] himax_ts_probe other driver has been loaded
[    3.161608] msg26xx: msg26xx_ts_init
[    3.164962] msg26xx: TPD probe
[    3.167914] ------------[ cut here ]------------
[    3.172533] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    3.183191] autorequest GPIO-0
[    3.186228] Modules linked in:
[    3.189296] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    3.198751] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    3.208302] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    3.217940] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    3.228006] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[    3.237119] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    3.245713] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    3.255172] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    3.264552] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    3.273577] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    3.282603] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    3.291632] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    3.301008] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    3.310466] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    3.319323] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    3.328072] ---[ end trace 9fe215f2a85bcb16 ]---
[    3.671609] qup_i2c f9923000.i2c: QUP: I2C status flags :0x81383c8, irq:127
[    3.677595] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.683914] _msg_WriteI2CSeq error -107,addr = 38
[    3.688486] msg26xx: _msg_GetVersion ret = -107
[    3.721600] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.727494] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.733812] _msg_WriteI2CSeq error -107,addr = 38
[    3.738387] msg26xx: _msg_GetVersion ret = -107
[    3.771598] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.777492] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.783811] _msg_WriteI2CSeq error -107,addr = 38
[    3.788385] msg26xx: _msg_GetVersion ret = -107
[    3.821413] msg26xx:  may be there is not msg26xx tp
[    3.825382] msg26xx: probe of 1-0026 failed with error 19
[    3.830994] FTS: ft5x0x_ts_probe enter
[    3.834605] FTS: irq = 330
[    3.901455] msm_thermal: Limiting cpu0 max frequency to 787200
[    3.906665] msm_thermal: Limiting cpu1 max frequency to 787200
[    3.912258] msm_thermal: Limiting cpu2 max frequency to 787200
[    3.917919] cpr_irq_handler: IRQ_STATUS = 0x05
[    3.918051] msm_thermal: Limiting cpu3 max frequency to 787200
[    3.928171] cpr_scale: last_volt[corner:2] = 1050000 uV
[    3.933368] cpr_scale: Down: cpr status = 0x0000387d (error_steps=15)
[    3.939768] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[    4.262263] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[    4.268966] input: ft5x0x_ts as /devices/virtual/input/input0
[    4.431589] ft5x0x_ts 1-0038: Create proc entry success!
[    4.436339] FTS:  Firmware version = 0xb
[    4.440234] FTS:  report rate is 100Hz.
[    4.444088] FTS:  touch threshold is 48.
[    4.447806] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[    4.454979] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[    4.461426] Successfully added driver ft5x0x_ts
[    4.465809] ctp_selftest_init
[    4.468883] create_proc_entry g_ctp_selftest_proc success
[    4.474176] ctp_upgrade_init
[    4.477132] [elan] create_proc_entry 222 success
[    4.481651] create_proc_entry success
[    4.485253] ctp_if_upgrade_init
[    4.488502] ctp_if_upgrade_init create_proc_entry 222 success
[    4.494151] create_proc_entry success
[    4.497762] create_proc_entry success
[    4.501503] bma2x2_probe:
[    4.531948] bma2x2_probe: chipid=20f8
[    4.534899] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[    4.542405] bma2x2_disable,start
[    4.546410] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1426, h:m:s == 0:23:46, d/m/y = 1/0/70
[    4.553725] qcom,qpnp-rtc qpnp-rtc-de559800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[    4.561626] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1426, h:m:s == 0:23:46, d/m/y = 1/0/70
[    4.570256] using rtc device, qpnp_rtc, for alarms
[    4.574471] qcom,qpnp-rtc qpnp-rtc-de559800: rtc core: registered qpnp_rtc as rtc0
[    4.582368] qcom,qpnp-rtc qpnp-rtc-de559800: Probe success !!
[    4.587926] i2c /dev entries driver
[    4.600689] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.606598] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.613732] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.620210] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.627951] s5k4e1_init_module:153
[    4.630858] s5k4e1_init_module:158 rc -19
[    4.635642] zgc2235_init_module:141
[    4.638616] zgc2235_init_module:146 rc -19
[    4.642257] msm_sensor_i2c_probe gc2235_i2c_probe called
[    4.647465] msm_sensor_i2c_probe: of_node exisists
[    4.652103] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[    4.658234] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[    4.663871] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[    4.669690] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[    4.675450] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[    4.680890] msm_sensor_get_sub_module_index:75 src_node NULL
[    4.686558] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[    4.692831] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[    4.699904] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[    4.705747] msm_sensor_get_sub_module_index csid_core[0] = 1
[    4.711389] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[    4.717694] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[    4.723798] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[    4.729935] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[    4.735777] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[    4.741506] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[    4.747296] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[    4.752963] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[    4.758576] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[    4.764249] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[    4.770990] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[    4.777788] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[    4.784562] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[    4.791302] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[    4.798101] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[    4.804874] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[    4.811181] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[    4.817545] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[    4.823848] msm_sensor_get_dt_data gpio count 3
[    4.828294] msm_sensor_get_dt_data gpio_array[0] = 13
[    4.833360] msm_sensor_get_dt_data gpio_array[1] = 15
[    4.838367] msm_sensor_get_dt_data gpio_array[2] = 85
[    4.843424] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[    4.850070] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[    4.856783] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[    4.863468] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[    4.870122] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[    4.876833] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[    4.883521] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[    4.890957] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[    4.898364] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[    4.905923] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[    4.911514] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[    4.917012] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[    4.924066] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[    4.930455] msm_sensor_power_up:991
[    4.933973] msm_sensor_power_up index 0
[    4.937743] msm_sensor_power_up type 2
[    4.952992] msm_sensor_power_up index 1
[    4.955789] msm_sensor_power_up type 2
[    4.970944] msm_sensor_power_up index 2
[    4.973771] msm_sensor_power_up type 2
[    4.988834] msm_sensor_power_up index 3
[    4.991661] msm_sensor_power_up type 0
[    5.001440] msm_sensor_power_up index 4
[    5.004234] msm_sensor_power_up type 1
[    5.051398] msm_sensor_power_up index 5
[    5.054192] msm_sensor_power_up type 1
[    5.101372] msm_sensor_power_up index 6
[    5.104168] msm_sensor_power_up type 1
[    5.151372] msm_sensor_power_up index 7
[    5.154167] msm_sensor_power_up type 1
[    5.201371] msm_sensor_power_up index 8
[    5.204167] msm_sensor_power_up type 3
[    5.208208] qup_i2c f9928000.i2c: QUP: I2C status flags :0x1363c8, irq:132
[    5.214785] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[    5.221033] msm_sensor_match_id: gc2235: read id failed
[    5.226249] msm_sensor_power_up:1095 match id failed rc -107
[    5.231885] msm_sensor_power_up:1102 failed
[    5.236024] msm_sensor_power_up index 8
[    5.239842] msm_sensor_power_up type 3
[    5.243603] msm_sensor_power_up index 7
[    5.247395] msm_sensor_power_up type 1
[    5.291371] msm_sensor_power_up index 6
[    5.294166] msm_sensor_power_up type 1
[    5.341372] msm_sensor_power_up index 5
[    5.344166] msm_sensor_power_up type 1
[    5.391371] msm_sensor_power_up index 4
[    5.394165] msm_sensor_power_up type 1
[    5.441371] msm_sensor_power_up index 3
[    5.444167] msm_sensor_power_up type 0
[    5.453946] msm_sensor_power_up index 2
[    5.456742] msm_sensor_power_up type 2
[    5.471805] msm_sensor_power_up index 1
[    5.474600] msm_sensor_power_up type 2
[    5.489689] msm_sensor_power_up index 0
[    5.492515] msm_sensor_power_up type 2
[    5.507587] msm_sensor_i2c_probe gc2235 power up failed
[    5.511820] gc2235: probe of 6-0078 failed with error -107
[    5.521730] lirc_dev: IR Remote Control driver registered, major 241
[    5.527133] IR NEC protocol handler initialized
[    5.531680] IR RC5(x) protocol handler initialized
[    5.536420] IR RC6 protocol handler initialized
[    5.540935] IR JVC protocol handler initialized
[    5.545477] IR Sony protocol handler initialized
[    5.550049] IR RC5 (streamzap) protocol handler initialized
[    5.555632] IR SANYO protocol handler initialized
[    5.560292] IR MCE Keyboard/mouse protocol handler initialized
[    5.566134] IR LIRC bridge handler initialized
[    5.571384] BMS: qpnp_bms_init: QPNP BMS INIT
[    5.574985] spmi qpnp-bms-de559600: Driver qcom,qpnp-bms requests probe deferral
[    5.582493] spmi qpnp-charger-de558800: Driver qcom,qpnp-charger requests probe deferral
[    5.629443] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    5.638568] cpuidle: using governor ladder
[    5.642582] cpuidle: using governor menu
[    5.645603] sdhci: Secure Digital Host Controller Interface driver
[    5.651729] sdhci: Copyright(c) Pierre Ossman
[    5.656679] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.662297] AXI: get_pdata(): Error: Client name not found
[    5.667146] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.676217] mmc0: no vmmc regulator found
[    5.681667] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[    5.687718] AXI: get_pdata(): Error: Client name not found
[    5.692834] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.702228] mmc1: no vmmc regulator found
[    5.707652] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[    5.715940] zram: Created 1 device(s) ...
[    5.723928] ashmem: initialized
[    5.726189] logger: created 256K log 'log_main'
[    5.732741] logger: created 256K log 'log_events'
[    5.738559] logger: created 256K log 'log_radio'
[    5.744333] logger: created 256K log 'log_system'
[    5.754929] sps:BAM 0xf9a44000 is registered.
[    5.760108] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    5.770859] PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
[    5.779720] input: qpnp_pon as /devices/virtual/input/input3
[    5.786009] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[    5.790542] coresight-fuse fc4be024.fuse: Fuse initialized
[    5.796333] coresight-cti fc310000.cti: CTI initialized
[    5.801004] coresight-cti fc311000.cti: CTI initialized
[    5.806236] coresight-cti fc312000.cti: CTI initialized
[    5.811486] coresight-cti fc313000.cti: CTI initialized
[    5.816616] coresight-cti fc314000.cti: CTI initialized
[    5.821882] coresight-cti fc315000.cti: CTI initialized
[    5.827065] coresight-cti fc316000.cti: CTI initialized
[    5.832327] coresight-cti fc317000.cti: CTI initialized
[    5.837492] coresight-cti fc318000.cti: CTI initialized
[    5.842775] coresight-cti fc351000.cti: CTI initialized
[    5.847909] coresight-cti fc352000.cti: CTI initialized
[    5.853142] coresight-cti fc353000.cti: CTI initialized
[    5.858287] coresight-cti fc354000.cti: CTI initialized
[    5.863369] mmc0: BKOPS_EN bit = 0
[    5.863585] coresight-cti fc335000.cti: CTI initialized
[    5.863807] coresight-cti fc338000.cti: CTI initialized
[    5.864040] coresight-cti fc33c000.cti: CTI initialized
[    5.864261] coresight-cti fc360000.cti: CTI initialized
[    5.864947] coresight-csr fc301000.csr: CSR initialized
[    5.896644] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[    5.902126] sps:BAM 0xfc37c000 is registered.
[    5.906543] coresight-tmc fc326000.tmc: TMC initialized
[    5.912640] coresight-tmc fc325000.tmc: TMC initialized
[    5.918124] coresight-tpiu fc320000.tpiu: seta gpios not specified
[    5.923327] coresight-tpiu fc320000.tpiu: setb gpios not specified
[    5.929474] mmc0: new HS200 MMC card at address 0001
[    5.929593] coresight-tpiu fc320000.tpiu: TPIU initialized
[    5.930324] coresight-funnel fc323000.funnel: FUNNEL initialized
[    5.930530] coresight-funnel fc321000.funnel: FUNNEL initialized
[    5.930749] coresight-funnel fc322000.funnel: FUNNEL initialized
[    5.930956] coresight-funnel fc355000.funnel: FUNNEL initialized
[    5.931730] coresight-replicator fc324000.replicator: REPLICATOR initialized
[    5.932626] coresight-stm fc302000.stm: STM initialized
[    5.933362] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[    5.934354] coresight-etm fc34c000.etm: ETM initialized
[    5.989156] coresight-etm fc34d000.etm: ETM initialized
[    5.994142] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[    5.994607] coresight-etm fc34e000.etm: ETM initialized
[    5.995105] coresight-etm fc34f000.etm: ETM initialized
[    5.995907] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[    5.996641] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[    5.997342] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[    5.998047] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[    5.999708] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    5.999735] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.010694] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[    6.011574] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    6.012748] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.013353] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.017684] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.018213] Netfilter messages via NETLINK v0.30.
[    6.018329] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[    6.019420] ctnetlink v0.93: registering with nfnetlink.
[    6.019943] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    6.019955] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    6.020351] xt_time: kernel timezone is -0000
[    6.020978] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.021535] arp_tables: (C) 2002 David S. Miller
[    6.021637] TCP: cubic registered
[    6.022851] NET: Registered protocol family 10
[    6.027736] Mobile IPv6
[    6.027794] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.028075] IPv6 over IPv4 tunneling driver
[    6.029085] NET: Registered protocol family 17
[    6.029223] Bridge firewalling registered
[    6.029248] Ebtables v2.0 registered
[    6.160063] Bluetooth: RFCOMM TTY layer initialized
[    6.164912] Bluetooth: RFCOMM socket layer initialized
[    6.164983] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[    6.168656]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[    6.184893] Bluetooth: RFCOMM ver 1.11
[    6.188546] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.193871] Bluetooth: BNEP filters: protocol multicast
[    6.199054] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.205622] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    6.212676] Registering SWP/SWPB emulation handler
[    6.225727] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.232320] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.234023] input: gpio-keys as /devices/gpio_keys.60/input/input4
[    6.234620] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.253406] qcom,qpnp-rtc qpnp-rtc-de559800: setting system clock to 1970-01-01 00:23:48 UTC (1428)
[    6.253420] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.253448] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.253788] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.253799] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.253821] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.253938] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.253961] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.259199] batfet:
[    6.270737] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[    6.304979] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.336939] msm_otg f9a55000.usb: USB in low power mode
[    6.339559] clock_late_init: Removing enables held for handed-off clocks
[    6.344245] ALSA device list:
[    6.344255]   No soundcards found.齕    6.355967] Freeing init memory: 72K
[    6.372904] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.410415] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.417798] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.426439] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.450636] type=1403 audit(1428.700:2): policy loaded auid=4294967295 ses=4294967295
[    6.457817] SELinux: Loaded policy from (null)
[    6.468666] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.470211] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[    6.471284] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[    6.475289] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    6.483294] init: invalid uid 'fm_radio'
[    6.503515] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.511773] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.546834] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.554221] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.562434] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.601999] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.644838] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.658415] qcom,qpnp-rtc qpnp-rtc-de559800: secs = 1428, h:m:s == 0:23:48, d/m/y = 1/0/70
[    6.661476] msm_thermal: Max frequency reset for cpu0
[    6.664512] msm_thermal: Max frequency reset for cpu1
[    6.664669] msm_thermal: Max frequency reset for cpu2
[    6.664823] msm_thermal: Max frequency reset for cpu3
[    6.685979] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3965148 ocv = 4064064 r_sense_uohm = 9406 warm_reset = 0
[    6.697725] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.704130] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.711779] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.719581] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.726554] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.733965] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    7.177874] init: cannot open '/initlogo.rle'
[    7.284128] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.356733] EXT4-fs (mmcblk0p22): recovery complete
[    7.361481] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    7.381447] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[    7.428620] e2fsck used greatest stack depth: 5328 bytes left
[    7.433423] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    7.437946] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49691/524288 blocks
[    7.455344] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    7.464494] init used greatest stack depth: 5296 bytes left
[    7.476786] EXT4-fs (mmcblk0p14): recovery complete
[    7.481529] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.489687] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[    7.499167] EXT4-fs (mmcblk0p21): recovery complete
[    7.504002] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[    7.511417] SELinux:  Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[    7.525088] EXT4-fs (mmcblk0p13): recovery complete
[    7.529821] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.590997] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    7.600962] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[    7.618929] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[    7.827097] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[    7.879392] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    7.892935] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[    7.901945] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    7.902174] diag: In diag_send_msg_mask_update, invalid status 0
[    7.902189] diag: In diag_send_log_mask_update, invalid status 0
[    7.902523] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[    7.902803] apr_tal:Q6 Is Up
[    7.931226] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[    7.936333] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    7.936339]
[    7.947745] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[    7.947754]
[    7.959198] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[    7.959205]
[    7.970733] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[    7.970740]
[    7.982393] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[    7.982399]
[    7.997129] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[    8.007010] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[    8.016831] wcd9xxx_resmgr_init
[    8.036170] wcd9xxx_mbhc_init: enter
[    8.042879] wcd9xxx_mbhc_init: leave ret 0
[    8.089896] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.096486] wcd9xxx_event_notify: leave
[    8.101207] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.107853] wcd9xxx_event_notify: leave
[    8.112602] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.119187] wcd9xxx_event_notify: leave
[    8.127553] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.134163] wcd9xxx_event_notify: leave
[    8.140807] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[    8.146140] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[    8.151962] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[    8.157537] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[    8.162886] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[    8.168408] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[    8.175106] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[    8.181160] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[    8.187136] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[    8.193190] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[    8.198848] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[    8.205001] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[    8.211763] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[    8.217496] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[    8.222846] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[    8.227958] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[    8.235423] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[    8.242146] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[    8.248463] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[    8.254531] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[    8.260619] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[    8.266733] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[    8.272766] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[    8.278661] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[    8.284585] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[    8.290659] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[    8.296730] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[    8.315131] input: Button Jack as /devices/sound.37/sound/card0/input5
[    8.320995] input: Headset Jack as /devices/sound.37/sound/card0/input6
[    8.372399] wcnss_wlan triggered by userspace
[    8.401889] wcnss_trigger_config:  adc get failed
[    8.406938] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.415428] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[    8.427465] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[    8.428350] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[    8.533875] ueventd used greatest stack depth: 4980 bytes left
[    8.567888] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[    8.580063] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [    9.369596] diag: In diag_send_msg_mask_update, invalid status 0
[    9.374899] diag: In diag_send_log_mask_update, invalid status 0
[    9.384664] init: untracked pid 272 exited
[    9.392227] msm_isp_close_node: halt timeout rc=0
[    9.395648] enable_store: android_usb: already disabled
[    9.410150] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.438894] Error: Driver 'DS' is already registered, aborting...
[    9.448474] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.457786] msm_tsens_get_temp: tsens mapping index not found
[    9.462788] msm_tsens_get_temp: tsens mapping index not found
[    9.468325] msm_tsens_get_temp: tsens mapping index not found
[    9.474669] msm_tsens_get_temp: tsens mapping index not found
[    9.479768] msm_tsens_get_temp: tsens mapping index not found
[    9.485586] msm_tsens_get_temp: tsens mapping index not found
[    9.541569] init: untracked pid 382 exited
[    9.570050] wcnss: no space available for smd frame
[    9.600837] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dac41a40
[    9.611494] wcnss: no space available for smd frame
[    9.641616] wcnss: no space available for smd frame
[    9.671592] wcnss: no space available for smd frame
[    9.711444] wcnss: not setting up vbatt
[    9.731429] ------------[ cut here ]------------
[    9.731470] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[    9.731477] Unbalanced enable for IRQ 330
[    9.731734] ---[ end trace 9fe215f2a85bcb18 ]---
[   10.051420] ------------[ cut here ]------------
[   10.051450] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[   10.051458] Unbalanced enable for IRQ 330
[   10.051759] ---[ end trace 9fe215f2a85bcb19 ]---
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 2 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[    0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
[    0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[    0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[    0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[    0.000000] cma: CMA: reserved 4 MiB at 1e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] IMEM DT static mapping successful
[    0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 107648
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 136MB 289MB = 425MB total
[    0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]      lowmem : 0xcde00000 - 0xe0000000   ( 290 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xcde00000   (  86 MB)
[    0.000000]      lowmem : 0xc0000000 - 0xc8800000   ( 136 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c4f41c   (12574 kB)
[    0.000000]       .init : 0xc0d00000 - 0xc0e12e00   (1100 kB)
[    0.000000]       .data : 0xc0e14000 - 0xc0ef8e08   ( 916 kB)
[    0.000000]        .bss : 0xc0ef8e2c - 0xc1113440   (2154 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000180] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000206] pid_max: default: 32768 minimum: 301
[    0.000485] Security Framework initialized
[    0.000536] SELinux:  Initializing.
[    0.000690] Mount-cache hash table entries: 512
[    0.001987] Initializing cgroup subsys debug
[    0.002004] Initializing cgroup subsys cpuacct
[    0.002016] Initializing cgroup subsys freezer
[    0.002069] CPU: Testing write buffer coherency: ok
[    0.002571] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002660] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.005168] Setting up static identity map for 0x8a42f0 - 0x8a4354
[    0.005205] Configuring XPU violations to be fatal errors
[    0.005218] MSM Memory Dump table set up
[    0.012619] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.018952] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.025290] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.025395] Brought up 4 CPUs
[    0.025415] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.039715] dummy:
[    0.056279] NET: Registered protocol family 16
[    0.068816] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.070920] KPI: Bootloader start count = 23283
[    0.070934] KPI: Bootloader end count = 51335
[    0.070944] KPI: Bootloader display count = 34113
[    0.070954] KPI: Bootloader load kernel count = 2449
[    0.070966] KPI: Kernel MPM timestamp = 79258
[    0.070975] KPI: Kernel MPM Clock frequency = 32768
[    0.070999] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[    0.071007]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[    0.085826] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[    0.090679] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[    0.121161] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[    0.121847] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.122524] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[    0.123193] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.123904] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[    0.124609] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[    0.125316] 8110_l1: 1225 mV normal idle
[    0.126038] 8110_l2: 1200 mV normal idle
[    0.126715] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[    0.127320] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[    0.127960] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[    0.128934] 8110_l4: 1200 mV normal idle
[    0.129593] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[    0.130278] 8110_l6: 1800 mV normal idle
[    0.130975] 8110_l7: 2050 mV normal idle
[    0.131681] 8110_l8: 1800 mV normal idle
[    0.132355] 8110_l9: 2050 mV normal idle
[    0.133075] 8110_l10: 1800 mV normal idle
[    0.133721] 8110_l10_ao: 1800 mV normal idle
[    0.134377] 8110_l10_so: 1800 mV normal idle
[    0.135025] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.136040] 8110_l14: 1800 mV normal idle
[    0.136757] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.137431] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[    0.138114] 8110_l17: 2900 mV normal idle
[    0.138826] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.139499] 8110_l19: 2850 mV normal idle
[    0.140204] 8110_l20: 3075 mV normal idle
[    0.140898] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.141571] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.143198] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[    0.143583] vdd_restriction_reg_init:Defer vdd rstr freq init
[    0.169358] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.169376] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.170063] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[    0.172092] 8110_s2: 900 <--> 1275 mV at 1150 mV
[    0.172349] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[    0.173791] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[    0.173832] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[    0.173847] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[    0.173860] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[    0.173924] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.173969] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[    0.173984] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[    0.174349] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174399] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[    0.174420] cpr_init_cpr_efuse: disable = 0, local = 1
[    0.174433] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[    0.174446] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[    0.174460] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[    0.174515] cpr_init_cpr_parameters: CPR is enabled by default.
[    0.174536] cpr_config: Timer count: 0x17700 (for 5000 us)
[    0.174868] apc_corner: 0 <--> 0 mV
[    0.177507] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.178776] kworker/u:1 used greatest stack depth: 6144 bytes left
[    0.180544] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.182593] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.184940] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.188834] sps:sps is ready.
[    0.190557] gdsc_vfe:
[    0.191008] gdsc_oxili_cx:
[    0.191634] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.193000] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[    0.194125] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[    0.195004] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[    0.196517] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[    0.197226] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[    0.229816] bio: create slab <bio-0> at 0
[    0.231035] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[    0.231643] ION heap vmalloc created
[    0.231807] ION heap kmalloc created
[    0.231869] ION heap iommu created
[    0.231898] ION heap qsecom created
[    0.231934] ION heap pil_1 created at 0x0c500000 with size 1300000
[    0.231980] ION heap pil_2 created at 0x08800000 with size 3d00000
[    0.233451] Linux media interface: v0.10
[    0.233544] Linux video capture interface: v2.00
[    0.235215] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[    0.236371] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[    0.238730] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[    0.239524] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[    0.240239] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[    0.241245] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[    0.241689] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[    0.242901] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[    0.243088] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[    0.243307] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[    0.243535] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[    0.243750] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[    0.243935] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[    0.244270] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[    0.244694] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[    0.244884] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[    0.245068] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[    0.245324] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[    0.245509] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[    0.245773] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[    0.245958] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[    0.246172] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[    0.246356] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[    0.246659] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[    0.246945] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[    0.247139] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[    0.247406] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[    0.247582] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.248448] Bluetooth: Core ver 2.16
[    0.248521] NET: Registered protocol family 31
[    0.248531] Bluetooth: HCI device and connection manager initialized
[    0.248547] Bluetooth: HCI socket layer initialized
[    0.248561] Bluetooth: L2CAP socket layer initialized
[    0.248879] Bluetooth: SCO socket layer initialized
[    0.249326] cfg80211: Calling CRDA to update world regulatory domain
[    0.249378] cfg80211: World regulatory domain updated:
[    0.249390] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.249407] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249422] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249438] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.249453] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249469] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.250129] Switching to clocksource arch_sys_counter
[    0.303728] NET: Registered protocol family 2
[    0.304203] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.305640] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.308905] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.309352] TCP: Hash tables configured (established 16384 bind 16384)
[    0.309366] TCP: reno registered
[    0.309484] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.309609] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.310063] NET: Registered protocol family 1
[    0.310706] Trying to unpack rootfs image as initramfs...
[    0.353900] Freeing initrd memory: 448K
[    0.359362] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[    0.360449] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[    0.360658] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[    0.361653] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[    0.361857] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[    0.362905] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[    0.363152] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[    0.364192] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[    0.364410] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[    0.365473] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[    0.365719] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[    0.366809] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[    0.367028] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[    0.368139] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[    0.369786] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[    0.374710] pil_pronto fb21b000.qcom,pronto: using secure boot
[    0.383914] NET: Registered protocol family 27
[    0.386537] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[    0.391746] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[    0.392053] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[    0.393262] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[    0.393296] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[    0.393681] msm_rpm_log_probe: OK
[    0.405747] audit: initializing netlink socket (disabled)
[    0.405798] type=2000 audit(0.390:1): initialized
[    0.523608] fuse init (API version 7.18)
[    0.524101] msgmni has been set to 792
[    0.526188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.526202] io scheduler noop registered
[    0.526209] io scheduler deadline registered
[    0.526228] io scheduler row registered
[    0.526396] io scheduler cfq registered (default)
[    0.526404] io scheduler test-iosched registered
[    0.526689] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[    0.526778] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[    0.526858] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[    0.526938] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[    0.527071] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[    0.527392] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[    0.527514] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[    0.529563] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[    0.529791] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[    0.529802] mdss_dsi_panel_init:989 Partial update disabled.
[    0.529859] dsi_parse_gpio:156, Disp_en gpio not specified
[    0.530392] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[    0.562475] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[    0.604341] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.604364] AXI: get_pdata(): Error: Client name not found
[    0.604373] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    0.604380] msm_serial_hsl_probe: Bus scaling is disabled
[    0.604512] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[    0.604574] msm_hsl_console_setup: console setup on port #0
[    2.165103] msm_thermal: Limiting cpu0 max frequency to 787200
[    2.165801] msm_thermal: Limiting cpu1 max frequency to 787200
[    2.165957] msm_thermal: Limiting cpu2 max frequency to 787200
[    2.166112] msm_thermal: Limiting cpu3 max frequency to 787200
[    2.188570] cpr_irq_handler: IRQ_STATUS = 0x45
[    2.188581] console [ttyHSL0] enabled
[    2.189296] msm_serial_hsl_init: driver initialized
[    2.195035] diagchar initialized now
[    2.204909] cpr_scale: last_volt[corner:2] = 1050000 uV
[    2.210249] cpr_scale: Down: cpr status = 0x00003639 (error_steps=14)
[    2.216641] cpr_scale: [corn:2] @ floor: 1050000 <= 1050000: NACK
[    2.224659] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    2.246086] brd: module loaded
[    2.253794] loop: module loaded
[    2.256506] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[    2.260801] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[    2.266313] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[    2.271982] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[    2.280279] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    2.286364] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    2.293309] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    2.299992] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    2.307581] sps: BAM device 0xf9904000 is not registered yet.
[    2.312628] sps:BAM 0xf9904000 is registered.
[    2.317138] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[    2.325223] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[    2.332961] tun: Universal TUN/TAP device driver, 1.6
[    2.336973] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.343323] rmnet_init: BAM devices[9]
[    2.359367] PPP generic driver version 2.4.2
[    2.362877] PPP BSD Compression module registered
[    2.367287] PPP Deflate Compression module registered
[    2.373407] PPP MPPE Compression module registered
[    2.377164] NET: Registered protocol family 24
[    2.382044] wcnss_wlan probed in built-in mode
[    2.389251] msm_otg f9a55000.usb: msm_otg probe
[    2.393398] msm_otg f9a55000.usb: OTG regs = c8942000
[    2.401808] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    2.406729] msm_otg f9a55000.usb: phy_reset: success
[    2.411726] msm_thermal: Limiting cpu0 max frequency to 384000
[    2.418049] msm_thermal: Limiting cpu1 max frequency to 384000
[    2.423651] msm_thermal: Limiting cpu2 max frequency to 384000
[    2.429137] cpr_irq_handler: IRQ_STATUS = 0x05
[    2.429417] msm_thermal: Limiting cpu3 max frequency to 384000
[    2.439390] cpr_scale: last_volt[corner:1] = 1050000 uV
[    2.444589] cpr_scale: Down: cpr status = 0x00006dbd (error_steps=15)
[    2.451009] cpr_scale: [corn:1] @ floor: 1050000 <= 1050000: NACK
[    2.458194] mbim_init: initialize 1 instances
[    2.461872] mbim_init: Initialized 1 ports
[    2.472147] rndis_qc_init: initialize rndis QC instance
[    2.478556] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.484482] android_usb gadget: Number of LUNs=3
[    2.489021]  lun0: LUN: removable file: (no medium)
[    2.493928]  lun1: LUN: removable read only CD-ROM file: (no medium)
[    2.500276]  lun2: LUN: removable file: (no medium)
[    2.506110] android_usb gadget: android_usb ready
[    2.513830] [himax] himax_ts_init
[    2.516230] wxun: himax_ts_probe: irq set here
[    2.520804] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[    2.526804] wxun: himax_ts_probe: reset set here
[    2.531538] ------------[ cut here ]------------
[    2.536112] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    2.546759] autorequest GPIO-0
[    2.549796] Modules linked in:
[    2.552872] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    2.562320] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    2.571870] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    2.581509] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    2.591577] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[    2.601209] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    2.610322] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    2.619783] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    2.629162] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    2.638187] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    2.647212] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    2.656244] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    2.665618] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    2.675078] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    2.683934] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    2.692731] ---[ end trace c2a2a274ab2d5667 ]---
[    3.021263] qup_i2c f9923000.i2c: QUP: I2C status flags :0x81343c8, irq:127
[    3.027250] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.050482] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.056378] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.080439] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.086333] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.110276] [TP] i2c_himax_read: i2c_read_block retry over 3
[    3.114909] himax_ts_probe other driver has been loaded
[    3.120412] msg26xx: msg26xx_ts_init
[    3.123763] msg26xx: TPD probe
[    3.126714] ------------[ cut here ]------------
[    3.131334] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    3.141991] autorequest GPIO-0
[    3.145028] Modules linked in:
[    3.148095] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    3.157552] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    3.167102] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    3.176740] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    3.186807] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[    3.195919] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    3.204512] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    3.213972] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    3.223351] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    3.232378] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    3.241402] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    3.250433] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    3.259809] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    3.269267] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    3.278124] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    3.286872] ---[ end trace c2a2a274ab2d5668 ]---
[    3.630447] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.636343] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.642640] _msg_WriteI2CSeq error -107,addr = 38
[    3.647235] msg26xx: _msg_GetVersion ret = -107
[    3.680439] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.686333] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.692630] _msg_WriteI2CSeq error -107,addr = 38
[    3.697227] msg26xx: _msg_GetVersion ret = -107
[    3.730438] qup_i2c f9923000.i2c: QUP: I2C status flags :0x1363c8, irq:127
[    3.736331] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.742627] _msg_WriteI2CSeq error -107,addr = 38
[    3.747225] msg26xx: _msg_GetVersion ret = -107
[    3.780271] msg26xx:  may be there is not msg26xx tp
[    3.784244] msg26xx: probe of 1-0026 failed with error 19
[    3.789857] FTS: ft5x0x_ts_probe enter
[    3.793533] FTS: irq = 330
[    4.221287] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[    4.228873] input: ft5x0x_ts as /devices/virtual/input/input0
[    4.390714] ft5x0x_ts 1-0038: Create proc entry success!
[    4.395518] FTS:  Firmware version = 0xb
[    4.399411] FTS:  report rate is 100Hz.
[    4.403294] FTS:  touch threshold is 48.
[    4.407274] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[    4.414317] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[    4.420683] Successfully added driver ft5x0x_ts
[    4.424948] ctp_selftest_init
[    4.428130] create_proc_entry g_ctp_selftest_proc success
[    4.433346] ctp_upgrade_init
[    4.436415] [elan] create_proc_entry 222 success
[    4.440832] create_proc_entry success
[    4.444393] ctp_if_upgrade_init
[    4.447737] ctp_if_upgrade_init create_proc_entry 222 success
[    4.453332] create_proc_entry success
[    4.456911] create_proc_entry success
[    4.460740] bma2x2_probe:
[    4.490895] bma2x2_probe: chipid=20f8
[    4.494177] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[    4.501562] bma2x2_disable,start
[    4.506270] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1439, h:m:s == 0:23:59, d/m/y = 1/0/70
[    4.513615] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[    4.521514] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1439, h:m:s == 0:23:59, d/m/y = 1/0/70
[    4.530579] using rtc device, qpnp_rtc, for alarms
[    4.534300] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[    4.542504] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[    4.547825] i2c /dev entries driver
[    4.569882] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.576044] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.583624] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.590021] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.598603] s5k4e1_init_module:153
[    4.602139] s5k4e1_init_module:158 rc -19
[    4.607733] zgc2235_init_module:141
[    4.611340] zgc2235_init_module:146 rc -19
[    4.614509] msm_sensor_i2c_probe gc2235_i2c_probe called
[    4.619702] msm_sensor_i2c_probe: of_node exisists
[    4.624379] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[    4.630530] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[    4.636030] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[    4.641982] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[    4.647663] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[    4.653186] msm_sensor_get_sub_module_index:75 src_node NULL
[    4.658772] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[    4.665118] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[    4.672208] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[    4.677960] msm_sensor_get_sub_module_index csid_core[0] = 1
[    4.683660] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[    4.689936] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[    4.696065] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[    4.702229] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[    4.707990] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[    4.713773] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[    4.719540] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[    4.725228] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[    4.730867] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[    4.736464] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[    4.743282] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[    4.750000] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[    4.756828] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[    4.763595] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[    4.770364] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[    4.777089] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[    4.783473] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[    4.789757] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[    4.796249] msm_sensor_get_dt_data gpio count 3
[    4.800610] msm_sensor_get_dt_data gpio_array[0] = 13
[    4.805583] msm_sensor_get_dt_data gpio_array[1] = 15
[    4.810686] msm_sensor_get_dt_data gpio_array[2] = 85
[    4.815642] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[    4.822367] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[    4.828994] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[    4.835735] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[    4.842415] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[    4.849046] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[    4.855788] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[    4.863253] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[    4.870632] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[    4.878144] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[    4.883742] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[    4.889267] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[    4.896332] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[    4.902749] msm_sensor_power_up:991
[    4.906197] msm_sensor_power_up index 0
[    4.909982] msm_sensor_power_up type 2
[    4.925460] msm_sensor_power_up index 1
[    4.928270] msm_sensor_power_up type 2
[    4.943717] msm_sensor_power_up index 2
[    4.946528] msm_sensor_power_up type 2
[    4.961989] msm_sensor_power_up index 3
[    4.964799] msm_sensor_power_up type 0
[    4.974677] msm_sensor_power_up index 4
[    4.977486] msm_sensor_power_up type 1
[    5.030278] msm_sensor_power_up index 5
[    5.033088] msm_sensor_power_up type 1
[    5.080277] msm_sensor_power_up index 6
[    5.083085] msm_sensor_power_up type 1
[    5.130279] msm_sensor_power_up index 7
[    5.133088] msm_sensor_power_up type 1
[    5.180279] msm_sensor_power_up index 8
[    5.183086] msm_sensor_power_up type 3
[    5.187425] qup_i2c f9928000.i2c: QUP: I2C status flags :0x81343c8, irq:132
[    5.193822] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[    5.200045] msm_sensor_match_id: gc2235: read id failed
[    5.205289] msm_sensor_power_up:1095 match id failed rc -107
[    5.210917] msm_sensor_power_up:1102 failed
[    5.215032] msm_sensor_power_up index 8
[    5.218849] msm_sensor_power_up type 3
[    5.222636] msm_sensor_power_up index 7
[    5.226402] msm_sensor_power_up type 1
[    5.270280] msm_sensor_power_up index 6
[    5.273088] msm_sensor_power_up type 1
[    5.320279] msm_sensor_power_up index 5
[    5.323088] msm_sensor_power_up type 1
[    5.370279] msm_sensor_power_up index 4
[    5.373088] msm_sensor_power_up type 1
[    5.420278] msm_sensor_power_up index 3
[    5.423086] msm_sensor_power_up type 0
[    5.432913] msm_sensor_power_up index 2
[    5.435720] msm_sensor_power_up type 2
[    5.450992] msm_sensor_power_up index 1
[    5.453801] msm_sensor_power_up type 2
[    5.469091] msm_sensor_power_up index 0
[    5.471962] msm_sensor_power_up type 2
[    5.487216] msm_sensor_i2c_probe gc2235 power up failed
[    5.491512] gc2235: probe of 6-0078 failed with error -107
[    5.506059] lirc_dev: IR Remote Control driver registered, major 241
[    5.511548] IR NEC protocol handler initialized
[    5.515993] IR RC5(x) protocol handler initialized
[    5.520822] IR RC6 protocol handler initialized
[    5.525281] IR JVC protocol handler initialized
[    5.529795] IR Sony protocol handler initialized
[    5.534451] IR RC5 (streamzap) protocol handler initialized
[    5.539952] IR SANYO protocol handler initialized
[    5.544755] msm_thermal: Limiting cpu0 max frequency to 787200
[    5.550555] IR MCE Keyboard/mouse protocol handler initialized
[    5.550932] msm_thermal: Limiting cpu1 max frequency to 787200
[    5.551083] msm_thermal: Limiting cpu2 max frequency to 787200
[    5.551235] msm_thermal: Limiting cpu3 max frequency to 787200
[    5.573785] IR LIRC bridge handler initialized
[    5.578978] BMS: qpnp_bms_init: QPNP BMS INIT
[    5.582628] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[    5.590061] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[    5.636980] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    5.646266] cpuidle: using governor ladder
[    5.650294] cpuidle: using governor menu
[    5.653301] sdhci: Secure Digital Host Controller Interface driver
[    5.659392] sdhci: Copyright(c) Pierre Ossman
[    5.664401] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.669915] AXI: get_pdata(): Error: Client name not found
[    5.674882] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.683976] mmc0: no vmmc regulator found
[    5.689486] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[    5.695641] AXI: get_pdata(): Error: Client name not found
[    5.700651] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.711945] mmc1: no vmmc regulator found
[    5.717428] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[    5.725752] zram: Created 1 device(s) ...
[    5.729607] ashmem: initialized
[    5.732009] logger: created 256K log 'log_main'
[    5.736486] logger: created 256K log 'log_events'
[    5.741240] logger: created 256K log 'log_radio'
[    5.745774] logger: created 256K log 'log_system'
[    5.751200] sps:BAM 0xf9a44000 is registered.
[    5.754521] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    5.762208] PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
[    5.771549] input: qpnp_pon as /devices/virtual/input/input3
[    5.777830] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[    5.782379] coresight-fuse fc4be024.fuse: Fuse initialized
[    5.788095] coresight-cti fc310000.cti: CTI initialized
[    5.792864] coresight-cti fc311000.cti: CTI initialized
[    5.798038] coresight-cti fc312000.cti: CTI initialized
[    5.803281] coresight-cti fc313000.cti: CTI initialized
[    5.808439] coresight-cti fc314000.cti: CTI initialized
[    5.811739] mmc0: BKOPS_EN bit = 0
[    5.817077] coresight-cti fc315000.cti: CTI initialized
[    5.822313] coresight-cti fc316000.cti: CTI initialized
[    5.823083] mmc0: new HS200 MMC card at address 0001
[    5.832307] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[    5.832554] coresight-cti fc317000.cti: CTI initialized
[    5.832772] coresight-cti fc318000.cti: CTI initialized
[    5.833007] coresight-cti fc351000.cti: CTI initialized
[    5.833226] coresight-cti fc352000.cti: CTI initialized
[    5.833457] coresight-cti fc353000.cti: CTI initialized
[    5.833689] coresight-cti fc354000.cti: CTI initialized
[    5.833909] coresight-cti fc335000.cti: CTI initialized
[    5.834142] coresight-cti fc338000.cti: CTI initialized
[    5.834362] coresight-cti fc33c000.cti: CTI initialized
[    5.834595] coresight-cti fc360000.cti: CTI initialized
[    5.835372] coresight-csr fc301000.csr: CSR initialized
[    5.895148] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[    5.898248] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[    5.898311] sps:BAM 0xfc37c000 is registered.
[    5.898687] coresight-tmc fc326000.tmc: TMC initialized
[    5.899287] coresight-tmc fc325000.tmc: TMC initialized
[    5.900468] coresight-tpiu fc320000.tpiu: seta gpios not specified
[    5.900482] coresight-tpiu fc320000.tpiu: setb gpios not specified
[    5.900630] coresight-tpiu fc320000.tpiu: TPIU initialized
[    5.901356] coresight-funnel fc323000.funnel: FUNNEL initialized
[    5.901595] coresight-funnel fc321000.funnel: FUNNEL initialized
[    5.901817] coresight-funnel fc322000.funnel: FUNNEL initialized
[    5.902021] coresight-funnel fc355000.funnel: FUNNEL initialized
[    5.902726] coresight-replicator fc324000.replicator: REPLICATOR initialized
[    5.903623] coresight-stm fc302000.stm: STM initialized
[    5.904359] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[    5.983055] coresight-etm fc34c000.etm: ETM initialized
[    5.986253]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[    5.997337] coresight-etm fc34d000.etm: ETM initialized
[    6.002534] coresight-etm fc34e000.etm: ETM initialized
[    6.007705] coresight-etm fc34f000.etm: ETM initialized
[    6.013226] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[    6.019405] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[    6.025714] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[    6.031839] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[    6.038450] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.045292] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.063643] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[    6.070871] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    6.077874] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.085386] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.097115] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.103839] Netfilter messages via NETLINK v0.30.
[    6.108103] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[    6.115060] ctnetlink v0.93: registering with nfnetlink.
[    6.119833] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    6.126312] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    6.132673] xt_time: kernel timezone is -0000
[    6.137131] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.142220] arp_tables: (C) 2002 David S. Miller
[    6.146458] TCP: cubic registered
[    6.150899] NET: Registered protocol family 10
[    6.158948] Mobile IPv6
[    6.160454] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.166109] IPv6 over IPv4 tunneling driver
[    6.170831] NET: Registered protocol family 17
[    6.174463] Bridge firewalling registered
[    6.178343] Ebtables v2.0 registered
[    6.182274] Bluetooth: RFCOMM TTY layer initialized
[    6.186768] Bluetooth: RFCOMM socket layer initialized
[    6.191897] Bluetooth: RFCOMM ver 1.11
[    6.195602] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.200922] Bluetooth: BNEP filters: protocol multicast
[    6.206109] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.212635] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    6.219675] Registering SWP/SWPB emulation handler
[    6.232738] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.233878] input: gpio-keys as /devices/gpio_keys.60/input/input4
[    6.234505] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.253328] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:24:00 UTC (1440)
[    6.253756] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.253769] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.253795] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.254103] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.254114] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.254138] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.254255] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.254277] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.259528] batfet:
[    6.271314] msm_otg f9a55000.usb: USB in low power mode
[    6.271479] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[    6.305249] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.351374] clock_late_init: Removing enables held for handed-off clocks
[    6.354356] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.369662] ALSA device list:
[    6.371637]   No soundcards foun    6.375896] Freeing init memory: 72K
[    6.381672] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.388966] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.397316] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.428889] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.436224] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1440, h:m:s == 0:24:0, d/m/y = 1/0/70
[    6.438422] type=1403 audit(1440.689:2): policy loaded auid=4294967295 ses=4294967295
[    6.439163] SELinux: Loaded policy from (null)
[    6.449242] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[    6.450498] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[    6.454389] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    6.462066] init: invalid uid 'fm_radio'
[    6.484102] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[    6.492161] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[    6.548349] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[    6.555661] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[    6.577889] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[    6.590298] msm_thermal: Max frequency reset for cpu0
[    6.596301] msm_thermal: Max frequency reset for cpu1
[    6.600499] msm_thermal: Max frequency reset for cpu2
[    6.605551] msm_thermal: Max frequency reset for cpu3
[    6.616455] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[    6.623696] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3957126 ocv = 4066221 r_sense_uohm = 9406 warm_reset = 0
[    6.635023] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.642432] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.650959] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.657257] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.665170] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.669583] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1441, h:m:s == 0:24:1, d/m/y = 1/0/70
[    7.150509] init: cannot open '/initlogo.rle'
[    7.256765] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.344016] EXT4-fs (mmcblk0p22): recovery complete
[    7.348824] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    7.421029] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[    7.468219] e2fsck used greatest stack depth: 5328 bytes left
[    7.473023] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    7.477546] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1008/131072 files, 49691/524288 blocks
[    7.494937] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    7.504087] init used greatest stack depth: 5296 bytes left
[    7.516441] EXT4-fs (mmcblk0p14): recovery complete
[    7.521208] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.529341] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[    7.538854] EXT4-fs (mmcblk0p21): recovery complete
[    7.543622] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[    7.551098] SELinux:  Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[    7.564767] EXT4-fs (mmcblk0p13): recovery complete
[    7.569498] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.630456] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    7.640421] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[    7.658382] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[    7.866483] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[    7.918872] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    7.932434] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[    7.941426] apr_tal:Q6 Is Up
[    7.943868] diag: In diag_send_msg_mask_update, invalid status 0
[    7.944175] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[    7.944283] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[    7.944790] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    7.944797]
[    7.944864] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[    7.944870]
[    7.944902] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[    7.944908]
[    7.944931] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[    7.944937]
[    7.944979] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[    7.944986]
[    7.949675] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[    7.956052] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[    7.958889] wcd9xxx_resmgr_init
[    7.979057] wcd9xxx_mbhc_init: enter
[    7.984847] wcd9xxx_mbhc_init: leave ret 0
[    8.025599] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.025618] wcd9xxx_event_notify: leave
[    8.026725] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.026737] wcd9xxx_event_notify: leave
[    8.027842] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.027852] wcd9xxx_event_notify: leave
[    8.028959] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.028971] wcd9xxx_event_notify: leave
[    8.033129] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[    8.034122] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[    8.034956] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[    8.035733] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[    8.036557] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[    8.037314] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[    8.038093] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[    8.038748] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[    8.039413] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[    8.040337] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[    8.041060] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[    8.041659] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[    8.042382] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[    8.043268] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[    8.044038] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[    8.044977] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[    8.045419] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[    8.046478] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[    8.047111] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[    8.047723] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[    8.048382] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[    8.048998] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[    8.049580] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[    8.050120] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[    8.050800] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[    8.051451] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[    8.052053] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[    8.063826] input: Button Jack as /devices/sound.37/sound/card0/input5
[    8.064329] input: Headset Jack as /devices/sound.37/sound/card0/input6
[    8.267963] diag: In diag_send_log_mask_update, invalid status 0
[    8.409291] wcnss_wlan triggered by userspace
[    8.440764] wcnss_trigger_config:  adc get failed
[    8.449495] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.458237] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[    8.471025] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[    8.481032] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[    8.506084] getprop used greatest stack depth: 5180 bytes left
[    8.584793] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[    8.614905] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [    8.761549] cp used greatest stack depth: 5068 bytes left
[    9.413529] diag: In diag_send_msg_mask_update, invalid status 0
[    9.423116] diag: In diag_send_log_mask_update, invalid status 0
[    9.431057] init: untracked pid 272 exited
[    9.438376] enable_store: android_usb: already disabled
[    9.460054] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.463871] msm_isp_close_node: halt timeout rc=0
[    9.475822] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.476436] msm_tsens_get_temp: tsens mapping index not found
[    9.476487] msm_tsens_get_temp: tsens mapping index not found
[    9.476512] msm_tsens_get_temp: tsens mapping index not found
[    9.486004] Error: Driver 'DS' is already registered, aborting...
[    9.507558] msm_tsens_get_temp: tsens mapping index not found
[    9.513298] msm_tsens_get_temp: tsens mapping index not found
[    9.518925] msm_tsens_get_temp: tsens mapping index not found
[    9.593021] wcnss: no space available for smd frame
[    9.612404] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dce355c0
[    9.620923] wcnss: no space available for smd frame
[    9.650465] wcnss: no space available for smd frame
[    9.680410] wcnss: no space available for smd frame
[    9.709641] init: untracked pid 382 exited
[    9.715619] wcnss: not setting up vbatt
[    9.830365] ------------[ cut here ]------------
[    9.830422] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[    9.830429] Unbalanced enable for IRQ 330
[    9.830695] ---[ end trace c2a2a274ab2d566a ]---
[   10.110428] ------------[ cut here ]------------
[   10.110469] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[   10.110477] Unbalanced enable for IRQ 330
[   10.110717] ---[ end trace c2a2a274ab2d566b ]---
[   10.862901] Notify: smsm init
[   10.902170] msm_ipc_router_send_control_msg: xprt_info not initialized
[   11.146826] diag: In diag_send_msg_mask_update, invalid status 0
[   11.151827] diag: In diag_send_log_mask_update, invalid status 0
[   15.448025] ------------[ cut here ]------------
[   15.451636] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[   15.463269] ---[ end trace c2a2a274ab2d566c ]---
[   15.565305] dsi_panel_handler enable=0
[   15.738224] ------------[ cut here ]------------
[   15.741854] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.752322] ---[ end trace c2a2a274ab2d566d ]---
[   15.756662] ------------[ cut here ]------------
[   15.761303] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.771768] ---[ end trace c2a2a274ab2d566e ]---
[   15.776107] ------------[ cut here ]------------
[   15.780736] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.791210] ---[ end trace c2a2a274ab2d566f ]---
[   15.795556] ------------[ cut here ]------------
[   15.800152] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.810662] ---[ end trace c2a2a274ab2d5670 ]---
[   15.814993] ------------[ cut here ]------------
[   15.819604] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.830100] ---[ end trace c2a2a274ab2d5671 ]---
[   15.860461] ------------[ cut here ]------------
[   15.864063] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.874580] ---[ end trace c2a2a274ab2d5672 ]---
[   15.878911] ------------[ cut here ]------------
[   15.883544] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.894046] ---[ end trace c2a2a274ab2d5673 ]---
[   15.898346] ------------[ cut here ]------------
[   15.902970] WARNING: at /home/xxx/work/e5255_htc/kernel/arch/arm/mach-msm/clock.c:426 clk_unprepare+0xc4/0xd4()
[   15.913476] ---[ end trace c2a2a274ab2d5674 ]---
[   15.958496] dsi_panel_handler enable=1
[   22.925928] pgd = dcdd8000
[   22.927599] [00000001] *pgd=00000000
[   22.982606] pgd = dcdd8000
[   22.984339] [00000001] *pgd=00000000
[   23.163051] pgd = dcdd8000
[   23.164723] [00000001] *pgd=00000000
[   25.291895] ndroid.exchange used greatest stack depth: 4884 bytes left
[   87.420311] dsi_panel_handler enable=0
[   89.101672] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   89.108568] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   89.114945] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   89.122911] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   89.130639] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   89.138336] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   89.157341] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   89.164678] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   90.305877] dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
[   90.305920] PM: Device alarm failed to suspend: error -16
[   90.305953] PM: Some devices failed to suspend
[   90.457770] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   90.464711] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   90.472673] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   90.480396] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   90.488097] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   90.501834] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   90.507176] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   90.515712] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   91.881641] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   91.888554] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   91.894968] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   91.902940] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   91.910697] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   91.918329] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   91.918551] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   91.918633] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.276465] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   92.284014] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.290680] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   92.297578] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.303990] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   92.311963] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   92.319621] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.330429] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.534433] Freezing of user space  aborted
[   92.538247] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   92.538716] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   92.538756] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   92.538765] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.538840] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.540613] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   92.540624] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.587973] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.900168] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   92.900185] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   92.900200] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.900735] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   92.900749] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.901159] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   92.901173] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   92.949614] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.310814] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   94.317703] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.324076] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   94.332053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   94.339752] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.346113] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   94.369843] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.377411] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.807607] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   94.814553] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   94.822510] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   94.830210] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.836573] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   94.853346] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.858691] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   94.867227] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.285239] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   95.292182] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   95.300136] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   95.307864] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   95.331645] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.339139] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.344620] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.351092] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.782936] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   95.789863] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.796301] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   95.804297] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   95.811984] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   95.819632] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.842703] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   95.848048] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   97.251682] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   97.258574] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   97.264960] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   97.272923] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   97.280646] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   97.288348] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   97.308962] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   97.316726] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   98.454343] PM: Some devices failed to suspend
[   98.595215] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   98.602158] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   98.610092] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   98.616456] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   98.624194] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   98.646296] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   98.660279] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   98.665710] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.118458] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   99.125403] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   99.133361] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   99.141103] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   99.148788] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.164297] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.170121] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.178320] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.601806] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   99.608696] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.615082] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   99.623048] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   99.630775] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   99.638467] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.655207] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   99.661374] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  100.481786] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  100.488678] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  100.495053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  100.503027] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  100.510764] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  100.518447] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  100.538284] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  100.544451] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  101.941024] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  101.947917] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  101.954291] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  101.962268] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  101.969966] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  101.976330] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  101.993272] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  101.998615] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  102.438660] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  102.445617] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  102.453577] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  102.461290] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  102.468989] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  102.487097] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  102.494564] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  102.502301] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  103.881555] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  103.888442] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  103.894820] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  103.902854] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  103.910489] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  103.916851] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  103.933561] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  103.941117] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  104.377751] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  104.384701] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  104.392660] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  104.400354] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  104.406767] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  104.422638] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  104.428698] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  104.436811] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  105.861680] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  105.868575] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  105.874953] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  105.882924] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  105.890622] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  105.896985] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  105.913446] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  105.918790] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  106.475794] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  106.482764] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  106.490682] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  106.497053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  106.504778] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  106.526055] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  106.532030] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  106.539900] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  107.918914] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  107.925854] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  107.933810] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  107.941551] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  107.949236] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  107.964303] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  107.970302] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  107.978156] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  108.405098] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  108.412046] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  108.419972] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  108.426341] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  108.434061] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  108.454818] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  108.461038] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  108.469440] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  109.842139] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  109.849030] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  109.855420] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  109.863384] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  109.871110] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  109.878802] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  109.900881] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  109.910885] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  110.292043] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  110.298934] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  110.305328] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  110.313298] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  110.321006] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  110.328708] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  110.347499] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  110.353564] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  111.731773] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  111.738666] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  111.745040] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  111.753013] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  111.760714] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  111.767076] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  111.784626] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  111.789971] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.209096] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  112.216053] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  112.223996] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  112.231736] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  112.239421] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.252039] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.258116] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.266086] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.694915] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  112.701867] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  112.709792] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.716153] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  112.723892] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  112.744192] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.751004] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  112.758515] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.147273] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  114.154226] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  114.162175] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  114.169877] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.176239] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  114.210314] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.215775] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.222071] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.645331] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  114.652275] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  114.660210] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.666591] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  114.674297] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  114.690778] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.696163] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  114.704637] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.158033] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  115.164986] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  115.172943] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  115.180640] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.187005] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  115.204460] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.209803] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.218344] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.632009] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  115.638890] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.645261] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  115.653235] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  115.660937] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.667296] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  115.693313] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  115.698654] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  116.122311] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  116.129205] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  116.135592] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  116.143553] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  116.151277] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  116.158976] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  116.179971] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  116.185581] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  117.325449] PM: Some devices failed to suspend
[  117.466008] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  117.472950] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  117.480881] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  117.487242] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  117.494983] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  117.511179] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  117.516527] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  117.525039] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  117.948842] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  117.955796] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  117.963740] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  117.971478] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  117.979168] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  117.994338] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  118.003401] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  118.008745] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  118.384399] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  118.385820] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  118.385835] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  118.385899] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  118.385911] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  118.385957] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  118.385968] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  118.433913] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.784029] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  119.790910] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.797310] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  119.805256] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  119.812980] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  119.820683] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.835469] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.840802] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.926000] Freezing of user space  aborted
[  119.935198] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  119.942122] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  119.950064] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.956438] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  119.964156] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  119.978649] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.984808] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  119.992475] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.066954] Freezing of user space  aborted
[  120.072188] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  120.079072] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.085445] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  120.093427] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  120.101119] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.107481] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  120.125191] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.130528] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.577851] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  120.584801] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  120.592747] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  120.600452] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.606826] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  120.626673] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.632500] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  120.642193] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.013689] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  122.020575] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.026956] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  122.034922] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  122.042661] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  122.050347] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.064022] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.069386] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.502114] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  122.509007] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.515378] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  122.523352] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  122.531051] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.537414] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  122.559164] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  122.564956] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  123.952243] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  123.959126] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  123.965496] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  123.973470] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  123.981172] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  123.987547] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  124.006131] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  124.013636] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  124.431565] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[  124.438458] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  124.444824] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[  124.452803] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[  124.460504] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  124.466866] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[  124.487964] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[  124.493602] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: cold boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6486016): start
[660] Loading boot image (6486016): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: cold boot
[690] target_pause_for_battery_charge : pon_reason is 128 cold_boot:1
[690] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Mon Dec 30 21:01:18 CST 2013
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[    0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
[    0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[    0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[    0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[    0.000000] cma: CMA: reserved 4 MiB at 1e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] IMEM DT static mapping successful
[    0.000000] PERCPU: Embedded 9 pages/cpu @c15c7000 s15872 r8192 d12800 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 107648
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 136MB 289MB = 425MB total
[    0.000000] Memory: 384796k/384796k available, 51428k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]      lowmem : 0xcde00000 - 0xe0000000   ( 290 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xcde00000   (  86 MB)
[    0.000000]      lowmem : 0xc0000000 - 0xc8800000   ( 136 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c4f41c   (12574 kB)
[    0.000000]       .init : 0xc0d00000 - 0xc0e12e00   (1100 kB)
[    0.000000]       .data : 0xc0e14000 - 0xc0ef8e08   ( 916 kB)
[    0.000000]        .bss : 0xc0ef8e2c - 0xc1113440   (2154 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000179] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000204] pid_max: default: 32768 minimum: 301
[    0.000488] Security Framework initialized
[    0.000540] SELinux:  Initializing.
[    0.000695] Mount-cache hash table entries: 512
[    0.001989] Initializing cgroup subsys debug
[    0.002005] Initializing cgroup subsys cpuacct
[    0.002016] Initializing cgroup subsys freezer
[    0.002070] CPU: Testing write buffer coherency: ok
[    0.002560] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002650] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.005156] Setting up static identity map for 0x8a42f0 - 0x8a4354
[    0.005194] Configuring XPU violations to be fatal errors
[    0.005207] MSM Memory Dump table set up
[    0.012584] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.018930] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.025258] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.025364] Brought up 4 CPUs
[    0.025383] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.039675] dummy:
[    0.056231] NET: Registered protocol family 16
[    0.068711] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.070810] KPI: Bootloader start count = 56114
[    0.070824] KPI: Bootloader end count = 84174
[    0.070834] KPI: Bootloader display count = 66944
[    0.070844] KPI: Bootloader load kernel count = 2448
[    0.070856] KPI: Kernel MPM timestamp = 112094
[    0.070866] KPI: Kernel MPM Clock frequency = 32768
[    0.070889] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[    0.070897]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[    0.085712] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[    0.090550] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[    0.121059] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[    0.121745] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.122418] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[    0.123090] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.123805] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[    0.124505] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[    0.125212] 8110_l1: 1225 mV normal idle
[    0.125931] 8110_l2: 1200 mV normal idle
[    0.126613] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[    0.127224] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[    0.127860] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[    0.128843] 8110_l4: 1200 mV normal idle
[    0.129501] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[    0.130185] 8110_l6: 1800 mV normal idle
[    0.130881] 8110_l7: 2050 mV normal idle
[    0.131589] 8110_l8: 1800 mV normal idle
[    0.132270] 8110_l9: 2050 mV normal idle
[    0.132984] 8110_l10: 1800 mV normal idle
[    0.133639] 8110_l10_ao: 1800 mV normal idle
[    0.134291] 8110_l10_so: 1800 mV normal idle
[    0.134937] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.135963] 8110_l14: 1800 mV normal idle
[    0.136672] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.137338] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[    0.138023] 8110_l17: 2900 mV normal idle
[    0.138733] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.139405] 8110_l19: 2850 mV normal idle
[    0.140105] 8110_l20: 3075 mV normal idle
[    0.140796] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.141471] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.143103] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[    0.143477] vdd_restriction_reg_init:Defer vdd rstr freq init
[    0.169242] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.169261] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.169954] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[    0.171987] 8110_s2: 900 <--> 1275 mV at 1150 mV
[    0.172244] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[    0.173682] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[    0.173723] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[    0.173738] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[    0.173752] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[    0.173815] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.173860] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[    0.173875] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[    0.174240] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174291] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[    0.174312] cpr_init_cpr_efuse: disable = 0, local = 1
[    0.174325] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[    0.174338] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[    0.174352] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[    0.174407] cpr_init_cpr_parameters: CPR is enabled by default.
[    0.174429] cpr_config: Timer count: 0x17700 (for 5000 us)
[    0.174758] apc_corner: 0 <--> 0 mV
[    0.177399] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.178661] kworker/u:1 used greatest stack depth: 6144 bytes left
[    0.180426] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.182473] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.184837] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.188710] sps:sps is ready.
[    0.190434] gdsc_vfe:
[    0.190884] gdsc_oxili_cx:
[    0.191507] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.192862] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[    0.193987] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[    0.194871] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[    0.196390] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[    0.197105] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[    0.229687] bio: create slab <bio-0> at 0
[    0.230897] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[    0.231500] ION heap vmalloc created
[    0.231658] ION heap kmalloc created
[    0.231719] ION heap iommu created
[    0.231749] ION heap qsecom created
[    0.231784] ION heap pil_1 created at 0x0c500000 with size 1300000
[    0.231831] ION heap pil_2 created at 0x08800000 with size 3d00000
[    0.233293] Linux media interface: v0.10
[    0.233387] Linux video capture interface: v2.00
[    0.235056] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[    0.236220] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[    0.238572] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[    0.239364] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[    0.240076] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[    0.241082] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[    0.241528] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[    0.242737] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[    0.242922] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[    0.243102] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[    0.243367] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[    0.243583] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[    0.243769] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[    0.244101] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[    0.244529] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[    0.244717] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[    0.244902] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[    0.245158] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[    0.245341] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[    0.245593] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[    0.245778] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[    0.245991] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[    0.246174] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[    0.246489] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[    0.246771] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[    0.246959] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[    0.247226] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[    0.247408] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.248270] Bluetooth: Core ver 2.16
[    0.248342] NET: Registered protocol family 31
[    0.248353] Bluetooth: HCI device and connection manager initialized
[    0.248370] Bluetooth: HCI socket layer initialized
[    0.248383] Bluetooth: L2CAP socket layer initialized
[    0.248698] Bluetooth: SCO socket layer initialized
[    0.249130] cfg80211: Calling CRDA to update world regulatory domain
[    0.249182] cfg80211: World regulatory domain updated:
[    0.249195] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.249211] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249227] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249242] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.249258] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249273] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249934] Switching to clocksource arch_sys_counter
[    0.303370] NET: Registered protocol family 2
[    0.303840] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.305284] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.308555] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.309003] TCP: Hash tables configured (established 16384 bind 16384)
[    0.309016] TCP: reno registered
[    0.309134] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.309266] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.309713] NET: Registered protocol family 1
[    0.310357] Trying to unpack rootfs image as initramfs...
[    0.353578] Freeing initrd memory: 448K
[    0.359084] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[    0.360158] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[    0.360365] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[    0.361373] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[    0.361583] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[    0.362611] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[    0.362856] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[    0.363923] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[    0.364129] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[    0.365187] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[    0.365433] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[    0.366520] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[    0.366739] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[    0.367858] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[    0.369478] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[    0.374402] pil_pronto fb21b000.qcom,pronto: using secure boot
[    0.383643] NET: Registered protocol family 27
[    0.386264] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[    0.391464] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[    0.391771] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[    0.392988] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[    0.393021] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[    0.393410] msm_rpm_log_probe: OK
[    0.405452] audit: initializing netlink socket (disabled)
[    0.405502] type=2000 audit(0.390:1): initialized
[    0.523309] fuse init (API version 7.18)
[    0.523805] msgmni has been set to 792
[    0.525904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.525918] io scheduler noop registered
[    0.525925] io scheduler deadline registered
[    0.525945] io scheduler row registered
[    0.526112] io scheduler cfq registered (default)
[    0.526121] io scheduler test-iosched registered
[    0.526402] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[    0.526492] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[    0.526581] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[    0.526662] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[    0.526792] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[    0.527112] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[    0.527234] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[    0.529298] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[    0.529527] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[    0.529538] mdss_dsi_panel_init:989 Partial update disabled.
[    0.529596] dsi_parse_gpio:156, Disp_en gpio not specified
[    0.530121] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[    0.562286] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[    0.604126] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.604148] AXI: get_pdata(): Error: Client name not found
[    0.604156] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    0.604164] msm_serial_hsl_probe: Bus scaling is disabled
[    0.604296] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[    0.604359] msm_hsl_console_setup: console setup on port #0
[    2.164989] console [ttyHSL0] enabled
[    2.169012] msm_serial_hsl_init: driver initialized
[    2.177459] diagchar initialized now
[    2.182406] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    2.199187] brd: module loaded
[    2.205008] loop: module loaded
[    2.207539] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[    2.212000] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[    2.217522] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[    2.223158] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[    2.231263] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    2.237574] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    2.244441] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    2.251224] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    2.258591] sps: BAM device 0xf9904000 is not registered yet.
[    2.263824] sps:BAM 0xf9904000 is registered.
[    2.268277] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[    2.276289] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[    2.283681] tun: Universal TUN/TAP device driver, 1.6
[    2.287689] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.293972] rmnet_init: BAM devices[9]
[    2.305974] PPP generic driver version 2.4.2
[    2.309350] PPP BSD Compression module registered
[    2.313923] PPP Deflate Compression module registered
[    2.319701] PPP MPPE Compression module registered
[    2.323723] NET: Registered protocol family 24
[    2.328443] wcnss_wlan probed in built-in mode
[    2.334868] msm_otg f9a55000.usb: msm_otg probe
[    2.338816] msm_otg f9a55000.usb: OTG regs = c8942000
[    2.346358] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    2.351292] msm_otg f9a55000.usb: phy_reset: success
[    2.356882] mbim_init: initialize 1 instances
[    2.360660] mbim_init: Initialized 1 ports
[    2.366603] rndis_qc_init: initialize rndis QC instance
[    2.371478] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.377643] android_usb gadget: Number of LUNs=3
[    2.382273]  lun0: LUN: removable file: (no medium)
[    2.387105]  lun1: LUN: removable read only CD-ROM file: (no medium)
[    2.393461]  lun2: LUN: removable file: (no medium)
[    2.398640] android_usb gadget: android_usb ready
[    2.404431] [himax] himax_ts_init
[    2.406746] wxun: himax_ts_probe: irq set here
[    2.411331] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[    2.417382] wxun: himax_ts_probe: reset set here
[    2.422091] ------------[ cut here ]------------
[    2.426678] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    2.437343] autorequest GPIO-0
[    2.440381] Modules linked in:
[    2.443438] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    2.452890] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    2.462438] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    2.472075] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    2.482145] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[    2.491780] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    2.500893] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    2.510353] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    2.519730] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    2.528758] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    2.537784] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    2.546814] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    2.556189] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    2.565650] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    2.574505] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    2.583288] ---[ end trace be0e6727fdadba5f ]---
[    2.910492] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.916426] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.940150] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.946083] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.970148] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.976080] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    3.000018] [TP] i2c_himax_read: i2c_read_block retry over 3
[    3.004633] himax_ts_probe other driver has been loaded
[    3.009922] msg26xx: msg26xx_ts_init
[    3.013461] msg26xx: TPD probe
[    3.016439] ------------[ cut here ]------------
[    3.021044] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    3.031715] autorequest GPIO-0
[    3.034752] Modules linked in:
[    3.037802] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    3.047260] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    3.056810] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    3.066446] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    3.076515] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[    3.085629] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    3.094222] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    3.103683] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    3.113060] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    3.122087] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    3.131113] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    3.140142] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    3.149518] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    3.158979] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    3.167834] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    3.176594] ---[ end trace be0e6727fdadba60 ]---
[    3.520155] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.526088] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.532362] _msg_WriteI2CSeq error -107,addr = 38
[    3.537011] msg26xx: _msg_GetVersion ret = -107
[    3.570148] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.576080] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.582352] _msg_WriteI2CSeq error -107,addr = 38
[    3.587001] msg26xx: _msg_GetVersion ret = -107
[    3.620148] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.626079] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.632351] _msg_WriteI2CSeq error -107,addr = 38
[    3.637002] msg26xx: _msg_GetVersion ret = -107
[    3.670016] msg26xx:  may be there is not msg26xx tp
[    3.673949] msg26xx: probe of 1-0026 failed with error 19
[    3.679408] FTS: ft5x0x_ts_probe enter
[    3.683128] FTS: irq = 330
[    4.110899] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[    4.117361] input: ft5x0x_ts as /devices/virtual/input/input0
[    4.280170] ft5x0x_ts 1-0038: Create proc entry success!
[    4.284888] FTS:  Firmware version = 0xb
[    4.288785] FTS:  report rate is 100Hz.
[    4.292628] FTS:  touch threshold is 48.
[    4.296280] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[    4.303492] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[    4.309934] Successfully added driver ft5x0x_ts
[    4.314407] ctp_selftest_init
[    4.317423] create_proc_entry g_ctp_selftest_proc success
[    4.322741] ctp_upgrade_init
[    4.325659] [elan] create_proc_entry 222 success
[    4.330213] create_proc_entry success
[    4.333830] ctp_if_upgrade_init
[    4.337033] ctp_if_upgrade_init create_proc_entry 222 success
[    4.342713] create_proc_entry success
[    4.346336] create_proc_entry success
[    4.350047] bma2x2_probe:
[    4.380567] bma2x2_probe: chipid=20f8
[    4.383404] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[    4.390960] bma2x2_disable,start
[    4.394736] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1955, h:m:s == 0:32:35, d/m/y = 1/0/70
[    4.402327] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=1:36:21, d/m/y=1/0/70
[    4.410402] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1955, h:m:s == 0:32:35, d/m/y = 1/0/70
[    4.418911] using rtc device, qpnp_rtc, for alarms
[    4.423244] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[    4.431130] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[    4.436697] i2c /dev entries driver
[    4.446492] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.452324] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.459284] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.465963] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.473401] s5k4e1_init_module:153
[    4.476463] s5k4e1_init_module:158 rc -19
[    4.481000] zgc2235_init_module:141
[    4.483925] zgc2235_init_module:146 rc -19
[    4.487690] msm_sensor_i2c_probe gc2235_i2c_probe called
[    4.492972] msm_sensor_i2c_probe: of_node exisists
[    4.497556] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[    4.503738] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[    4.509271] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[    4.515193] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[    4.520922] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[    4.526373] msm_sensor_get_sub_module_index:75 src_node NULL
[    4.532035] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[    4.538281] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[    4.545407] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[    4.551220] msm_sensor_get_sub_module_index csid_core[0] = 1
[    4.556844] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[    4.563198] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[    4.569255] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[    4.575438] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[    4.581253] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[    4.586962] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[    4.592799] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[    4.598420] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[    4.604081] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[    4.609706] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[    4.616494] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[    4.623264] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[    4.630038] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[    4.636787] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[    4.643577] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[    4.650349] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[    4.656666] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[    4.663021] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[    4.669289] msm_sensor_get_dt_data gpio count 3
[    4.673797] msm_sensor_get_dt_data gpio_array[0] = 13
[    4.678809] msm_sensor_get_dt_data gpio_array[1] = 15
[    4.683907] msm_sensor_get_dt_data gpio_array[2] = 85
[    4.688878] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[    4.695578] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[    4.702258] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[    4.708926] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[    4.715626] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[    4.722309] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[    4.728978] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[    4.736461] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[    4.743839] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[    4.751396] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[    4.756929] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[    4.762512] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[    4.769517] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[    4.775960] msm_sensor_power_up:991
[    4.779427] msm_sensor_power_up index 0
[    4.783247] msm_sensor_power_up type 2
[    4.798356] msm_sensor_power_up index 1
[    4.801169] msm_sensor_power_up type 2
[    4.816228] msm_sensor_power_up index 2
[    4.819020] msm_sensor_power_up type 2
[    4.834044] msm_sensor_power_up index 3
[    4.836834] msm_sensor_power_up type 0
[    4.846640] msm_sensor_power_up index 4
[    4.849431] msm_sensor_power_up type 1
[    4.900020] msm_sensor_power_up index 5
[    4.902812] msm_sensor_power_up type 1
[    4.950019] msm_sensor_power_up index 6
[    4.952809] msm_sensor_power_up type 1
[    5.000018] msm_sensor_power_up index 7
[    5.002808] msm_sensor_power_up type 1
[    5.050034] msm_sensor_power_up index 8
[    5.052824] msm_sensor_power_up type 3
[    5.056812] qup_i2c f9928000.i2c: QUP: I2C status flags :0xc1343c8, irq:132
[    5.063522] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[    5.069770] msm_sensor_match_id: gc2235: read id failed
[    5.074984] msm_sensor_power_up:1095 match id failed rc -107
[    5.080621] msm_sensor_power_up:1102 failed
[    5.084769] msm_sensor_power_up index 8
[    5.088589] msm_sensor_power_up type 3
[    5.092341] msm_sensor_power_up index 7
[    5.096141] msm_sensor_power_up type 1
[    5.140021] msm_sensor_power_up index 6
[    5.142811] msm_sensor_power_up type 1
[    5.190015] msm_sensor_power_up index 5
[    5.192805] msm_sensor_power_up type 1
[    5.240019] msm_sensor_power_up index 4
[    5.242809] msm_sensor_power_up type 1
[    5.290098] msm_sensor_power_up index 3
[    5.292888] msm_sensor_power_up type 0
[    5.302653] msm_sensor_power_up index 2
[    5.305443] msm_sensor_power_up type 2
[    5.320440] msm_sensor_power_up index 1
[    5.323231] msm_sensor_power_up type 2
[    5.338252] msm_sensor_power_up index 0
[    5.341065] msm_sensor_power_up type 2
[    5.356073] msm_sensor_i2c_probe gc2235 power up failed
[    5.360285] gc2235: probe of 6-0078 failed with error -107
[    5.368762] lirc_dev: IR Remote Control driver registered, major 241
[    5.374190] IR NEC protocol handler initialized
[    5.378672] IR RC5(x) protocol handler initialized
[    5.383466] IR RC6 protocol handler initialized
[    5.387961] IR JVC protocol handler initialized
[    5.392494] IR Sony protocol handler initialized
[    5.397077] IR RC5 (streamzap) protocol handler initialized
[    5.402649] IR SANYO protocol handler initialized
[    5.407319] IR MCE Keyboard/mouse protocol handler initialized
[    5.413154] IR LIRC bridge handler initialized
[    5.418101] BMS: qpnp_bms_init: QPNP BMS INIT
[    5.422009] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[    5.429441] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[    5.475024] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    5.483622] cpuidle: using governor ladder
[    5.487288] cpuidle: using governor menu
[    5.490654] sdhci: Secure Digital Host Controller Interface driver
[    5.496743] sdhci: Copyright(c) Pierre Ossman
[    5.501565] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.507124] AXI: get_pdata(): Error: Client name not found
[    5.512227] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.520654] mmc0: no vmmc regulator found
[    5.525981] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[    5.531954] AXI: get_pdata(): Error: Client name not found
[    5.537109] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    5.546376] mmc1: no vmmc regulator found
[    5.551679] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[    5.559222] zram: Created 1 device(s) ...
[    5.566903] ashmem: initialized
[    5.569119] logger: created 256K log 'log_main'
[    5.575653] logger: created 256K log 'log_events'
[    5.581445] logger: created 256K log 'log_radio'
[    5.587135] logger: created 256K log 'log_system'
[    5.595455] sps:BAM 0xf9a44000 is registered.
[    5.600644] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    5.609179] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot
[    5.618803] input: qpnp_pon as /devices/virtual/input/input3
[    5.626236] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[    5.630656] coresight-fuse fc4be024.fuse: Fuse initialized
[    5.636282] coresight-cti fc310000.cti: CTI initialized
[    5.641188] coresight-cti fc311000.cti: CTI initialized
[    5.646381] coresight-cti fc312000.cti: CTI initialized
[    5.651593] coresight-cti fc313000.cti: CTI initialized
[    5.656768] coresight-cti fc314000.cti: CTI initialized
[    5.662041] coresight-cti fc315000.cti: CTI initialized
[    5.667187] coresight-cti fc316000.cti: CTI initialized
[    5.672429] coresight-cti fc317000.cti: CTI initialized
[    5.677632] coresight-cti fc318000.cti: CTI initialized
[    5.682916] coresight-cti fc351000.cti: CTI initialized
[    5.688046] coresight-cti fc352000.cti: CTI initialized
[    5.693287] coresight-cti fc353000.cti: CTI initialized
[    5.698468] coresight-cti fc354000.cti: CTI initialized
[    5.703712] coresight-cti fc335000.cti: CTI initialized
[    5.708860] coresight-cti fc338000.cti: CTI initialized
[    5.713987] mmc0: BKOPS_EN bit = 0
[    5.714129] coresight-cti fc33c000.cti: CTI initialized
[    5.714278] coresight-cti fc360000.cti: CTI initialized
[    5.714768] coresight-csr fc301000.csr: CSR initialized
[    5.735842] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[    5.741258] sps:BAM 0xfc37c000 is registered.
[    5.745625] coresight-tmc fc326000.tmc: TMC initialized
[    5.751201] coresight-tmc fc325000.tmc: TMC initialized
[    5.756714] coresight-tpiu fc320000.tpiu: seta gpios not specified
[    5.762124] coresight-tpiu fc320000.tpiu: setb gpios not specified
[    5.768387] coresight-tpiu fc320000.tpiu: TPIU initialized
[    5.774475] coresight-funnel fc323000.funnel: FUNNEL initialized
[    5.779893] coresight-funnel fc321000.funnel: FUNNEL initialized
[    5.785890] coresight-funnel fc322000.funnel: FUNNEL initialized
[    5.791880] coresight-funnel fc355000.funnel: FUNNEL initialized
[    5.797727] mmc0: new HS200 MMC card at address 0001
[    5.798166] coresight-replicator fc324000.replicator: REPLICATOR initialized
[    5.798760] coresight-stm fc302000.stm: STM initialized
[    5.799252] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[    5.799955] coresight-etm fc34c000.etm: ETM initialized
[    5.827822] coresight-etm fc34d000.etm: ETM initialized
[    5.832913] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[    5.833248] coresight-etm fc34e000.etm: ETM initialized
[    5.833589] coresight-etm fc34f000.etm: ETM initialized
[    5.834176] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[    5.834662] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[    5.835138] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[    5.835602] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[    5.836752] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    5.836771] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    5.844155] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[    5.844709] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    5.845489] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    5.845882] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    5.848843] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    5.849192] Netfilter messages via NETLINK v0.30.
[    5.849285] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[    5.850123] ctnetlink v0.93: registering with nfnetlink.
[    5.850528] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    5.850538] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    5.850845] xt_time: kernel timezone is -0000
[    5.851280] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.851603] arp_tables: (C) 2002 David S. Miller
[    5.851675] TCP: cubic registered
[    5.852500] NET: Registered protocol family 10
[    5.855899] Mobile IPv6
[    5.855943] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.856150] IPv6 over IPv4 tunneling driver
[    5.856820] NET: Registered protocol family 17
[    5.856918] Bridge firewalling registered
[    5.856936] Ebtables v2.0 registered
[    5.998837] Bluetooth: RFCOMM TTY layer initialized
[    6.003692] Bluetooth: RFCOMM socket layer initialized
[    6.003735] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[    6.006853]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[    6.023685] Bluetooth: RFCOMM ver 1.11
[    6.027354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.032668] Bluetooth: BNEP filters: protocol multicast
[    6.037860] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.044226] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    6.051446] Registering SWP/SWPB emulation handler
[    6.062033] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.068428] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.076673] input: gpio-keys as /devices/gpio_keys.60/input/input4
[    6.081848] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.082269] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1956, h:m:s == 0:32:36, d/m/y = 1/0/70
[    6.097470] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:32:36 UTC (1956)
[    6.097560] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.097820] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.097828] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.097843] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.097929] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.097943] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.103082] batfet:
[    6.114153] msm_otg f9a55000.usb: USB in low power mode
[    6.114283] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7
[    6.148138] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1956, h:m:s == 0:32:36, d/m/y = 1/0/70
[    6.180717] clock_late_init: Removing enables held for handed-off clocks
[    6.189569] ALSA device list:
[    6.191526]   No soundcards f[    6.195497] Freeing init memory: 72K
[    6.198400] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1956, h:m:s == 0:32:36, d/m/y = 1/0/70
[    6.244875] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.252256] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.262562] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.301045] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.308388] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.314195] type=1403 audit(1956.720:2): policy loaded auid=4294967295 ses=4294967295
[    6.314754] SELinux: Loaded policy from (null)
[    6.321936] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[    6.322674] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[    6.325407] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    6.331383] init: invalid uid 'fm_radio'
[    6.356387] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.391222] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.398551] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.406777] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.446040] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.453483] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.472729] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 1957, h:m:s == 0:32:37, d/m/y = 1/0/70
[    6.480057] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 3954645 ocv = 4067154 r_sense_uohm = 9406 warm_reset = 0
[    6.491961] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.498286] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.506001] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.513855] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.520788] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.528176] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.998340] init: cannot open '/initlogo.rle'
[    7.104858] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.326693] EXT4-fs (mmcblk0p22): recovery complete
[    7.331483] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    7.409847] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[    7.457139] e2fsck used greatest stack depth: 5328 bytes left
[    7.461934] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    7.466463] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1011/131072 files, 49713/524288 blocks
[    7.483898] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    7.493052] init used greatest stack depth: 5212 bytes left
[    7.509915] EXT4-fs (mmcblk0p14): recovery complete
[    7.514762] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.522853] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[    7.532286] EXT4-fs (mmcblk0p21): recovery complete
[    7.537094] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[    7.544533] SELinux:  Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[    7.562543] EXT4-fs (mmcblk0p13): recovery complete
[    7.567342] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.629217] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    7.639189] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[    7.657108] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[    7.865546] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[    7.917839] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    7.931301] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[    7.940318] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    7.940754] apr_tal:Q6 Is Up
[    7.941624] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[    7.943030] diag: In diag_send_msg_mask_update, invalid status 0
[    7.943054] diag: In diag_send_log_mask_update, invalid status 0
[    7.969491] msm8x10-wcd-i2c-core 5-000d: adsp is ready
[    7.974706] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    7.974712]
[    7.986083] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[    7.986089]
[    7.997585] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-1p2v: vol=[1200000 1200000]uV, curr=[5000]uA, ond 0
[    7.997594]
[    8.009108] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdda-cp: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
[    8.009115]
[    8.020788] msm8x10-wcd-i2c-core msm8x10_wcd_codec: cdc-vdd-mic-bias: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1
[    8.020794]
[    8.035591] wcd9xxx_core_res_init: num_irqs = 24, num_irq_regs = 3
[    8.045367] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_i2c_probe: irq initialization passed
[    8.055094] wcd9xxx_resmgr_init
[    8.074425] wcd9xxx_mbhc_init: enter
[    8.081106] wcd9xxx_mbhc_init: leave ret 0
[    8.131982] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.138529] wcd9xxx_event_notify: leave
[    8.143333] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.149909] wcd9xxx_event_notify: leave
[    8.154701] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.161302] wcd9xxx_event_notify: leave
[    8.166051] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MICBIAS_1_OFF(16)
[    8.172679] wcd9xxx_event_notify: leave
[    8.179454] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[    8.184828] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[    8.190552] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[    8.196096] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[    8.201543] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[    8.207050] asoc: snd-soc-dummy-dai <-> SEC_MI2S_RX_HOSTLESS mapping ok
[    8.213759] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[    8.219840] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
[    8.225721] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
[    8.231984] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[    8.237799] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[    8.243882] asoc: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
[    8.250583] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[    8.256349] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[    8.261683] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
[    8.266829] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[    8.274110] asoc: msm8x10_wcd_i2s_rx1 <-> msm-dai-q6-mi2s.1 mapping ok
[    8.280854] asoc: msm8x10_wcd_i2s_tx1 <-> msm-dai-q6-mi2s.0 mapping ok
[    8.287114] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
[    8.293201] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
[    8.299224] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
[    8.305368] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
[    8.311421] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
[    8.317444] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
[    8.323292] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
[    8.329272] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
[    8.335391] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
[    8.350924] input: Button Jack as /devices/sound.37/sound/card0/input5
[    8.356858] input: Headset Jack as /devices/sound.37/sound/card0/input6
[    8.406682] wcnss_wlan triggered by userspace
[    8.440575] wcnss_trigger_config:  adc get failed
[    8.447652] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.457112] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[    8.469843] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[    8.479602] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[    8.542772] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[    8.555650] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [    9.174951] cp used greatest stack depth: 5068 bytes left
[    9.347914] diag: In diag_send_msg_mask_update, invalid status 0
[    9.352942] diag: In diag_send_log_mask_update, invalid status 0
[    9.386308] msm_isp_close_node: halt timeout rc=0
[    9.397231] msm_tsens_get_temp: tsens mapping index not found
[    9.402154] msm_tsens_get_temp: tsens mapping index not found
[    9.407694] msm_tsens_get_temp: tsens mapping index not found
[    9.413599] msm_tsens_get_temp: tsens mapping index not found
[    9.419140] msm_tsens_get_temp: tsens mapping index not found
[    9.424919] msm_tsens_get_temp: tsens mapping index not found
[    9.426118] init: untracked pid 272 exited
[    9.428521] enable_store: android_usb: already disabled
[    9.442651] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.450681] Error: Driver 'DS' is already registered, aborting...
[    9.461402] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.554612] wcnss: no space available for smd frame
[    9.580180] wcnss: no space available for smd frame
[    9.605695] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dd443480
[    9.612358] wcnss: no space available for smd frame
[    9.640241] wcnss: no space available for smd frame
[    9.672614] wcnss: not setting up vbatt
[    9.692668] init: untracked pid 379 exited
[    9.810087] ------------[ cut here ]------------
[    9.810124] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[    9.810132] Unbalanced enable for IRQ 330
[    9.810372] ---[ end trace be0e6727fdadba62 ]---
[   10.070078] ------------[ cut here ]------------
[   10.070109] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[   10.070117] Unbalanced enable for IRQ 330
[   10.070345] ---[ end trace be0e6727fdadba63 ]---
[   10.757051] Notify: smsm init
[   11.051675] diag: In diag_send_msg_mask_update, invalid status 0
[   11.056486] diag: In diag_send_log_mask_update, invalid status 0
[   16.297292] ------------[ cut here ]------------
[   16.300921] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[   16.312032] ---[ end trace be0e6727fdadba64 ]---
[   16.399593] dsi_panel_handler enable=0
[   16.648541] dsi_panel_handler enable=1
[   22.728592] pgd = dcd84000
[   22.730387] [00000001] *pgd=00000000
[   22.785039] pgd = dcd84000
[   22.786719] [00000001] *pgd=00000000
[   22.934333] pgd = dcd84000
[   22.936000] [00000001] *pgd=00000000
[   25.128959] AsyncTask #1 used greatest stack depth: 4820 bytes left
[   45.075616] dsi_panel_handler enable=0
[   46.965773] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   46.972726] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   46.980695] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   46.988376] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   46.994751] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   47.010891] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.016961] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.024757] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.455111] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   47.462057] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   47.469989] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.476371] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   47.484080] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   47.498229] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.503763] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.512096] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.946601] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   47.953547] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   47.961504] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   47.969206] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   47.975581] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   47.995623] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.003192] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.008537] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.442843] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   48.449775] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.456252] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   48.464191] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   48.471086] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   48.471113] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.472345] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.493809] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.678512] Freezing of user space  aborted
[   48.682870] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   48.682931] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   48.682958] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.694274] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   48.694290] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   48.694299] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.694307] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   48.732298] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.048964] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   49.048974] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   49.048984] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.049023] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   49.049031] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.058174] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   49.058186] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.098430] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.400120] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   49.400567] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   49.400586] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.400641] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   49.400653] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.400697] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   49.400705] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.449595] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   50.685471] qcom,qpnp-charger:qpnp_chg_iusbmax_set: bad mA=0 asked to set
[   50.838034] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   50.845014] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   50.852934] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   50.860660] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   50.868356] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   50.882207] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   50.887969] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   50.896264] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   51.790928] dsi_panel_handler enable=1
[   52.024818] ------------[ cut here ]------------
[   52.028567] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[   52.038017] Unbalanced enable for IRQ 330
[   52.042178] ---[ end trace be0e6727fdadba65 ]---
[   72.206221] dsi_panel_handler enable=0
[   92.788875] SysRq : Emergency Remount R/O
[   92.899262] Restarting system with command 'bootloader'.
[   92.903613] Going down for restart now
[   92.908879] Calling SCM to disable SPMI PMIC餉ndroid Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[130] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[150] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[160] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: Warm boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:0
[580] fastboot_init()
[580] Loading keystore failed status 2 [610] USB init ept @ 0x7a43000
[630] udc_start()
[740] -- reset --
[750] -- portchange --
[970] -- reset --
[970] -- portchange --
[1240] fastboot: processing commands
[10050] fastboot: getvar:partition-type:boot
[10050] fastboot: getvar:max-download-size
[10090] fastboot: download:0078d000
[10350] fastboot: flash:boot
[20590] fastboot: reboot
[20610] rebooting the 銩ndroid Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[30] Done initialization of the card
[130] Config MIPI_VIDEO_PANEL.
[140] mdss_dsi_panel_initialize: wxun: mipi_dsi.c--lane_swap=1
[140] mipi_panel_auto_detect:start
[150] otm9605A_read_reg_single: wxun, mipi_tianma_otm9605a_video_qhd.c reg=0xd202
[160] mipi_panel_auto_detect_otm9605A: lcdid=0x9605.
[160] mipi_tianma_otm9605A_panel_video_qhd_reinit: start
[170] mdss_dsi_config_reinit: lctlc: mipi_dsi.c
[330] Turn on MIPI_VIDEO_PANEL.
[340] Video lane tested successfully
[570] Backlight enable=1 failed
[570] pm8x41_get_is_cold_boot: Warm boot
[570] target_pause_for_battery_charge : pon_reason is 128 cold_boot:0
[580] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[590] Loading boot image (6490112): start
[660] Loading boot image (6490112): done
[670] ERROR: Unable to find suitable device tree for device (165/0x00010001/11/0)
[680] Using DTB entry 165/00010001/11/0 for device 165/00010001/11/0
[690] pm8x41_get_is_cold_boot: Warm boot
[690] target_pause_for_battery_charge : pon_reason is 128 cold_boot:0
[700] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_vid[720] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x8000, ramdisk @ 0x2000000 (459525), tags/device tree @ 0x1e00000
[840] Turn off MIPI_VIDEO_PANEL.
[840] Continuous splash enabled, keeping panel alive.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-g8218128-00704-g42fcf2d-dirty (xxx@soft111) (gcc version 4.7 (GCC) ) #6 SMP PREEMPT Mon Dec 30 22:04:11 CST 2013
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[    0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
[    0.000000] memory pool 3 (start 0x1ff00000 size 100000) initialized
[    0.000000] cma: CMA: reserved 16 MiB at 1ec00000
[    0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[    0.000000] cma: CMA: reserved 4 MiB at 1e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] IMEM DT static mapping successful
[    0.000000] PERCPU: Embedded 9 pages/cpu @c15c8000 s15872 r8192 d12800 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 107648
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.emmc=true androidboot.serialno=HTC_C1_C androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tmotm9605A_qhd_video lcm.id=0x9605
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 136MB 289MB = 425MB total
[    0.000000] Memory: 384792k/384792k available, 51432k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]      lowmem : 0xcde00000 - 0xe0000000   ( 290 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xcde00000   (  86 MB)
[    0.000000]      lowmem : 0xc0000000 - 0xc8800000   ( 136 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c4f448   (12574 kB)
[    0.000000]       .init : 0xc0d00000 - 0xc0e12e00   (1100 kB)
[    0.000000]       .data : 0xc0e14000 - 0xc0efa3c8   ( 921 kB)
[    0.000000]        .bss : 0xc0efa3ec - 0xc1114a00   (2154 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000180] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000205] pid_max: default: 32768 minimum: 301
[    0.000482] Security Framework initialized
[    0.000534] SELinux:  Initializing.
[    0.000686] Mount-cache hash table entries: 512
[    0.001976] Initializing cgroup subsys debug
[    0.001993] Initializing cgroup subsys cpuacct
[    0.002004] Initializing cgroup subsys freezer
[    0.002059] CPU: Testing write buffer coherency: ok
[    0.002546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002636] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.005150] Setting up static identity map for 0x8a4c30 - 0x8a4c94
[    0.005188] Configuring XPU violations to be fatal errors
[    0.005201] MSM Memory Dump table set up
[    0.012592] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.018908] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.025239] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.025348] Brought up 4 CPUs
[    0.025367] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.039680] dummy:
[    0.056251] NET: Registered protocol family 16
[    0.068808] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.070941] KPI: Bootloader start count = 21001
[    0.070954] KPI: Bootloader end count = 49075
[    0.070964] KPI: Bootloader display count = 31844
[    0.070974] KPI: Bootloader load kernel count = 2449
[    0.070986] KPI: Kernel MPM timestamp = 76987
[    0.070996] KPI: Kernel MPM Clock frequency = 32768
[    0.071019] socinfo_print: v8, id=165, ver=1.1, raw_id=2069, raw_ver=1, hw_plat=11, hw_plat_ver=196608
[    0.071028]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072
[    0.085787] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[    0.090631] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[    0.121072] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[    0.121758] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.122435] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[    0.123097] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[    0.123801] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[    0.124498] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[    0.125200] 8110_l1: 1225 mV normal idle
[    0.125917] 8110_l2: 1200 mV normal idle
[    0.126588] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[    0.127186] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[    0.127824] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[    0.128809] 8110_l4: 1200 mV normal idle
[    0.129467] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[    0.130144] 8110_l6: 1800 mV normal idle
[    0.130836] 8110_l7: 2050 mV normal idle
[    0.131539] 8110_l8: 1800 mV normal idle
[    0.132209] 8110_l9: 2050 mV normal idle
[    0.132883] 8110_l10: 1800 mV normal idle
[    0.133576] 8110_l10_ao: 1800 mV normal idle
[    0.134224] 8110_l10_so: 1800 mV normal idle
[    0.134870] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.135883] 8110_l14: 1800 mV normal idle
[    0.136592] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.137259] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[    0.137938] 8110_l17: 2900 mV normal idle
[    0.138646] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.139311] 8110_l19: 2850 mV normal idle
[    0.140012] 8110_l20: 3075 mV normal idle
[    0.140702] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[    0.141373] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[    0.143013] msm-thermal qcom,msm-thermal.51: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[    0.143392] vdd_restriction_reg_init:Defer vdd rstr freq init
[    0.169055] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.169074] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.169782] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[    0.171811] 8110_s2: 900 <--> 1275 mV at 1150 mV
[    0.172069] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[    0.173521] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[    0.173564] cpr_voltage_plan_init: [1] [1150000 1150000 1275000] uV
[    0.173579] cpr_voltage_plan_init: [2] [1075000 1075000 1275000] uV
[    0.173594] cpr_voltage_plan_init: [3] [1050000 1050000 1275000] uV
[    0.173658] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.173703] cpr_pvs_init: [row:23] = 0xA0128513000002E0, n_bits=5, bin=11 (3)
[    0.173717] cpr_pvs_init: pvs initial turbo voltage_= from 1275000 to 1275000
[    0.174079] cpr_is_fuse_redundant: [row:53] = 0x0 @25:3 = 2?: redundant=0
[    0.174131] cpr_init_cpr_efuse: [row:61] = 0x1250f115d9da8
[    0.174151] cpr_init_cpr_efuse: disable = 0, local = 1
[    0.174165] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 482
[    0.174179] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 699
[    0.174192] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 949
[    0.174248] cpr_init_cpr_parameters: CPR is enabled by default.
[    0.174269] cpr_config: Timer count: 0x17700 (for 5000 us)
[    0.174601] apc_corner: 0 <--> 0 mV
[    0.177276] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.178542] kworker/u:1 used greatest stack depth: 6144 bytes left
[    0.180308] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.182349] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.184665] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[    0.188529] sps:sps is ready.
[    0.190255] gdsc_vfe:
[    0.190699] gdsc_oxili_cx:
[    0.191332] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.192683] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[    0.193797] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[    0.194671] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[    0.196180] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[    0.196906] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[    0.229011] bio: create slab <bio-0> at 0
[    0.230230] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[    0.230832] ION heap vmalloc created
[    0.230993] ION heap kmalloc created
[    0.231056] ION heap iommu created
[    0.231085] ION heap qsecom created
[    0.231121] ION heap pil_1 created at 0x0c500000 with size 1300000
[    0.231167] ION heap pil_2 created at 0x08800000 with size 3d00000
[    0.232599] Linux media interface: v0.10
[    0.232691] Linux video capture interface: v2.00
[    0.234408] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[    0.235573] msm_iommu_dev_v0: device lpass_iommu mapped at c88e0000, with 4 ctx banks
[    0.237927] msm_iommu_dev_v0: device copss_iommu mapped at c8960000, with 8 ctx banks
[    0.238717] msm_iommu_dev_v0: device mdpe_iommu mapped at c8b20000, with 2 ctx banks
[    0.239432] msm_iommu_dev_v0: device mdps_iommu mapped at c8b40000, with 2 ctx banks
[    0.240438] msm_iommu_dev_v0: device gfx_iommu mapped at c8b60000, with 3 ctx banks
[    0.240884] msm_iommu_dev_v0: device vfe_iommu mapped at c8b80000, with 1 ctx banks
[    0.242106] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[    0.242294] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[    0.242474] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[    0.242704] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[    0.242917] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[    0.243101] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[    0.243467] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[    0.243882] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[    0.244073] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[    0.244256] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[    0.244508] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[    0.244693] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[    0.244936] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[    0.245121] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[    0.245334] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[    0.245519] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[    0.245846] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[    0.246129] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[    0.246320] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[    0.246588] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[    0.246767] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.247626] Bluetooth: Core ver 2.16
[    0.247700] NET: Registered protocol family 31
[    0.247711] Bluetooth: HCI device and connection manager initialized
[    0.247727] Bluetooth: HCI socket layer initialized
[    0.247740] Bluetooth: L2CAP socket layer initialized
[    0.248059] Bluetooth: SCO socket layer initialized
[    0.248493] cfg80211: Calling CRDA to update world regulatory domain
[    0.248544] cfg80211: World regulatory domain updated:
[    0.248557] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.248574] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.248590] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.248606] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.248621] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.248637] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.249299] Switching to clocksource arch_sys_counter
[    0.302627] NET: Registered protocol family 2
[    0.303111] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.304550] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.307847] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.308287] TCP: Hash tables configured (established 16384 bind 16384)
[    0.308300] TCP: reno registered
[    0.308416] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.308546] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.308990] NET: Registered protocol family 1
[    0.309640] Trying to unpack rootfs image as initramfs...
[    0.352781] Freeing initrd memory: 448K
[    0.358329] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[    0.359345] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[    0.359625] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[    0.360638] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[    0.360843] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[    0.361876] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[    0.362119] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[    0.363191] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[    0.363395] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[    0.364460] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[    0.364702] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[    0.365793] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[    0.366010] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[    0.367133] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[    0.368764] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[    0.373643] pil_pronto fb21b000.qcom,pronto: using secure boot
[    0.382838] NET: Registered protocol family 27
[    0.385476] platform qcom,msm-audio-ion.30: Driver msm-audio-ion requests probe deferral
[    0.390668] find_cur_cpu_level: CPUs are running at an unknown rate. Defaulting to 1190400 KHz.
[    0.390969] cpufreq_table_init: CPU: 6 scaling frequencies supported.
[    0.392197] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[    0.392229] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[    0.392622] msm_rpm_log_probe: OK
[    0.404772] audit: initializing netlink socket (disabled)
[    0.404824] type=2000 audit(0.390:1): initialized
[    0.522525] fuse init (API version 7.18)
[    0.523014] msgmni has been set to 792
[    0.525131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.525144] io scheduler noop registered
[    0.525152] io scheduler deadline registered
[    0.525171] io scheduler row registered
[    0.525336] io scheduler cfq registered (default)
[    0.525344] io scheduler test-iosched registered
[    0.525627] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc0 incorrect owner 2
[    0.525716] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc1 incorrect owner 5
[    0.525806] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 4
[    0.525886] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
[    0.526018] gpiochip_add: registered GPIOs 572 to 575 on device: pm8110-gpio
[    0.526338] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa3 incorrect owner 2
[    0.526461] gpiochip_add: registered GPIOs 570 to 571 on device: pm8110-mpp
[    0.528532] mdss_dsi_panel_init: Panel Name = TIANMA OTM9605A QHD video mode dsi panel
[    0.528761] mdss_dsi_panel_init:977 Continuous splash flag enabled.
[    0.528771] mdss_dsi_panel_init:989 Partial update disabled.
[    0.528829] dsi_parse_gpio:156, Disp_en gpio not specified
[    0.529310] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[    0.561661] mdss_fb_register: FrameBuffer[0] 540x960 size=0 registered successfully!
[    0.602816] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.602838] AXI: get_pdata(): Error: Client name not found
[    0.602846] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    0.602854] msm_serial_hsl_probe: Bus scaling is disabled
[    0.602984] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[    0.603047] msm_hsl_console_setup: console setup on port #0
[    2.163597] console [ttyHSL0] enabled
[    2.167620] msm_serial_hsl_init: driver initialized
[    2.176085] diagchar initialized now
[    2.181039] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    2.197834] brd: module loaded
[    2.203622] loop: module loaded
[    2.206156] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[    2.210613] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[    2.216136] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[    2.221771] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[    2.229880] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    2.236188] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    2.243052] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    2.249839] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    2.257202] sps: BAM device 0xf9904000 is not registered yet.
[    2.262440] sps:BAM 0xf9904000 is registered.
[    2.266877] sps:BAM 0xf9904000 (va:0xc8be0000) enabled: ver:0x15, number of pipes:24
[    2.274911] spi_qsd f9926000.spi: master is unqueued, this is deprecated
[    2.282286] tun: Universal TUN/TAP device driver, 1.6
[    2.286294] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.292576] rmnet_init: BAM devices[9]
[    2.304482] PPP generic driver version 2.4.2
[    2.307859] PPP BSD Compression module registered
[    2.312434] PPP Deflate Compression module registered
[    2.318213] PPP MPPE Compression module registered
[    2.322233] NET: Registered protocol family 24
[    2.326950] wcnss_wlan probed in built-in mode
[    2.333389] msm_otg f9a55000.usb: msm_otg probe
[    2.337331] msm_otg f9a55000.usb: OTG regs = c8942000
[    2.344876] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    2.349810] msm_otg f9a55000.usb: phy_reset: success
[    2.355383] mbim_init: initialize 1 instances
[    2.359151] mbim_init: Initialized 1 ports
[    2.365124] rndis_qc_init: initialize rndis QC instance
[    2.369991] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.376163] android_usb gadget: Number of LUNs=3
[    2.380796]  lun0: LUN: removable file: (no medium)
[    2.385627]  lun1: LUN: removable read only CD-ROM file: (no medium)
[    2.391984]  lun2: LUN: removable file: (no medium)
[    2.397153] android_usb gadget: android_usb ready
[    2.402968] [himax] himax_ts_init
[    2.405283] wxun: himax_ts_probe: irq set here
[    2.409865] [HIMAX PORTING MSG]himax_ts_probe ts->client->irq =330
[    2.415919] wxun: himax_ts_probe: reset set here
[    2.420627] ------------[ cut here ]------------
[    2.425216] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    2.435881] autorequest GPIO-0
[    2.438918] Modules linked in:
[    2.441975] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    2.451427] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    2.460975] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    2.470612] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    2.480682] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c05355c8>] (himax_ts_probe+0x174/0xc64)
[    2.490315] [<c05355c8>] (himax_ts_probe+0x174/0xc64) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    2.499431] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    2.508891] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    2.518268] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    2.527293] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    2.536321] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    2.545350] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    2.554725] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    2.564187] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    2.573042] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    2.581824] ---[ end trace 8ecd75e0473f590c ]---
[    2.909852] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.915787] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.939513] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.945444] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.969511] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    2.975443] qup_i2c f9923000.i2c: I2C slave addr:0x4a not connected
[    2.999382] [TP] i2c_himax_read: i2c_read_block retry over 3
[    3.003996] himax_ts_probe other driver has been loaded
[    3.009288] msg26xx: msg26xx_ts_init
[    3.012823] msg26xx: TPD probe
[    3.015801] ------------[ cut here ]------------
[    3.020408] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[    3.031078] autorequest GPIO-0
[    3.034116] Modules linked in:
[    3.037165] [<c010ccb4>] (unwind_backtrace+0x0/0x138) from [<c018aa6c>] (warn_slowpath_common+0x4c/0x64)
[    3.046624] [<c018aa6c>] (warn_slowpath_common+0x4c/0x64) from [<c018ab18>] (warn_slowpath_fmt+0x30/0x40)
[    3.056174] [<c018ab18>] (warn_slowpath_fmt+0x30/0x40) from [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4)
[    3.065809] [<c03c30d0>] (gpio_ensure_requested+0x4c/0xa4) from [<c03c3514>] (gpio_direction_output+0xc4/0x2b0)
[    3.075878] [<c03c3514>] (gpio_direction_output+0xc4/0x2b0) from [<c0538984>] (tpd_probe+0x3c/0x748)
[    3.084992] [<c0538984>] (tpd_probe+0x3c/0x748) from [<c0545abc>] (i2c_device_probe+0x88/0xe0)
[    3.093586] [<c0545abc>] (i2c_device_probe+0x88/0xe0) from [<c0485f34>] (driver_probe_device+0xac/0x354)
[    3.103047] [<c0485f34>] (driver_probe_device+0xac/0x354) from [<c0486268>] (__driver_attach+0x8c/0x90)
[    3.112424] [<c0486268>] (__driver_attach+0x8c/0x90) from [<c0484474>] (bus_for_each_dev+0x4c/0x80)
[    3.121451] [<c0484474>] (bus_for_each_dev+0x4c/0x80) from [<c0485560>] (bus_add_driver+0xf0/0x280)
[    3.130477] [<c0485560>] (bus_add_driver+0xf0/0x280) from [<c0486724>] (driver_register+0x78/0x138)
[    3.139506] [<c0486724>] (driver_register+0x78/0x138) from [<c0547bc8>] (i2c_register_driver+0x2c/0xe4)
[    3.148882] [<c0547bc8>] (i2c_register_driver+0x2c/0xe4) from [<c01005f8>] (do_one_initcall+0x10c/0x170)
[    3.158342] [<c01005f8>] (do_one_initcall+0x10c/0x170) from [<c0d00bb0>] (kernel_init+0xf0/0x1ac)
[    3.167198] [<c0d00bb0>] (kernel_init+0xf0/0x1ac) from [<c0107250>] (kernel_thread_exit+0x0/0x8)
[    3.175959] ---[ end trace 8ecd75e0473f590d ]---
[    3.519518] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.525450] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.531725] _msg_WriteI2CSeq error -107,addr = 38
[    3.536373] msg26xx: _msg_GetVersion ret = -107
[    3.569512] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.575443] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.581717] _msg_WriteI2CSeq error -107,addr = 38
[    3.586367] msg26xx: _msg_GetVersion ret = -107
[    3.619511] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[    3.625442] qup_i2c f9923000.i2c: I2C slave addr:0x26 not connected
[    3.631715] _msg_WriteI2CSeq error -107,addr = 38
[    3.636365] msg26xx: _msg_GetVersion ret = -107
[    3.669380] msg26xx:  may be there is not msg26xx tp
[    3.673313] msg26xx: probe of 1-0026 failed with error 19
[    3.678772] FTS: ft5x0x_ts_probe enter
[    3.682491] FTS: irq = 330
[    4.110268] FTS: --------ft5x0x_read_version---------fwversion=b,module=5d
[    4.116726] input: ft5x0x_ts as /devices/virtual/input/input0
[    4.279530] ft5x0x_ts 1-0038: Create proc entry success!
[    4.284248] FTS:  Firmware version = 0xb
[    4.288146] FTS:  report rate is 100Hz.
[    4.291989] FTS:  touch threshold is 48.
[    4.295643] input: proximity as /devices/f9923000.i2c/i2c-1/1-0038/input/input1
[    4.302849] FTS: tp_prox_setup_polled_device, err=0, poll-interval=100
[    4.309294] Successfully added driver ft5x0x_ts
[    4.313770] ctp_selftest_init
[    4.316784] create_proc_entry g_ctp_selftest_proc success
[    4.322101] ctp_upgrade_init
[    4.325019] [elan] create_proc_entry 222 success
[    4.329574] create_proc_entry success
[    4.333190] ctp_if_upgrade_init
[    4.336394] ctp_if_upgrade_init create_proc_entry 222 success
[    4.342073] create_proc_entry success
[    4.345696] create_proc_entry success
[    4.349410] bma2x2_probe:
[    4.379929] bma2x2_probe: chipid=20f8
[    4.382765] input: accelerometer as /devices/f9925000.i2c/i2c-0/0-0018/input/input2
[    4.390317] bma2x2_disable,start
[    4.394103] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2157, h:m:s == 0:35:57, d/m/y = 1/0/70
[    4.401687] qcom,qpnp-rtc qpnp-rtc-de519800: Alarm set for - h:r:s=0:0:0, d/m/y=1/0/70
[    4.409592] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2157, h:m:s == 0:35:57, d/m/y = 1/0/70
[    4.418100] using rtc device, qpnp_rtc, for alarms
[    4.422431] qcom,qpnp-rtc qpnp-rtc-de519800: rtc core: registered qpnp_rtc as rtc0
[    4.430315] qcom,qpnp-rtc qpnp-rtc-de519800: Probe success !!
[    4.435885] i2c /dev entries driver
[    4.445703] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.451531] msm_actuator_i2c_probe:789 msm_actuator_i2c_probe: succeeded
[    4.458497] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.465170] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
[    4.472614] s5k4e1_init_module:153
[    4.475676] s5k4e1_init_module:158 rc -19
[    4.480216] zgc2235_init_module:141
[    4.483136] zgc2235_init_module:146 rc -19
[    4.486900] msm_sensor_i2c_probe gc2235_i2c_probe called
[    4.492182] msm_sensor_i2c_probe: of_node exisists
[    4.496766] msm_sensor_get_dt_data qcom,sensor-name gc2235, rc 0
[    4.502948] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[    4.508481] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[    4.514402] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0
[    4.520132] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[    4.525583] msm_sensor_get_sub_module_index:75 src_node NULL
[    4.531244] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[    4.537491] msm_sensor_get_sub_module_index qcom,led flash cell index 1, rc 0
[    4.544617] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[    4.550429] msm_sensor_get_sub_module_index csid_core[0] = 1
[    4.556053] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[    4.562407] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[    4.568464] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[    4.574647] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[    4.580462] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[    4.586172] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[    4.592008] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[    4.597629] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[    4.603291] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[    4.608915] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[    4.615703] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[    4.622474] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[    4.629227] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[    4.636017] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[    4.642787] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[    4.649560] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[    4.655876] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[    4.662231] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[    4.668497] msm_sensor_get_dt_data gpio count 3
[    4.673006] msm_sensor_get_dt_data gpio_array[0] = 13
[    4.678018] msm_sensor_get_dt_data gpio_array[1] = 15
[    4.683118] msm_sensor_get_dt_data gpio_array[2] = 85
[    4.688087] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[    4.694788] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[    4.701468] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[    4.708134] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[    4.714836] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[    4.721519] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[    4.728187] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[    4.735671] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[    4.743049] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[    4.750606] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[    4.756138] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[    4.761721] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[    4.768727] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[    4.775168] msm_sensor_power_up:991
[    4.778635] msm_sensor_power_up index 0
[    4.782458] msm_sensor_power_up type 2
[    4.797563] msm_sensor_power_up index 1
[    4.800376] msm_sensor_power_up type 2
[    4.815436] msm_sensor_power_up index 2
[    4.818226] msm_sensor_power_up type 2
[    4.833250] msm_sensor_power_up index 3
[    4.836041] msm_sensor_power_up type 0
[    4.845846] msm_sensor_power_up index 4
[    4.848637] msm_sensor_power_up type 1
[    4.899383] msm_sensor_power_up index 5
[    4.902174] msm_sensor_power_up type 1
[    4.949382] msm_sensor_power_up index 6
[    4.952172] msm_sensor_power_up type 1
[    4.999382] msm_sensor_power_up index 7
[    5.002172] msm_sensor_power_up type 1
[    5.049397] msm_sensor_power_up index 8
[    5.052188] msm_sensor_power_up type 3
[    5.056172] qup_i2c f9928000.i2c: QUP: I2C status flags :0xc1343c8, irq:132
[    5.062885] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[    5.069133] msm_sensor_match_id: gc2235: read id failed
[    5.074347] msm_sensor_power_up:1095 match id failed rc -107
[    5.079985] msm_sensor_power_up:1102 failed
[    5.084133] msm_sensor_power_up index 8
[    5.087952] msm_sensor_power_up type 3
[    5.091703] msm_sensor_power_up index 7
[    5.095503] msm_sensor_power_up type 1
[    5.139384] msm_sensor_power_up index 6
[    5.142175] msm_sensor_power_up type 1
[    5.189378] msm_sensor_power_up index 5
[    5.192168] msm_sensor_power_up type 1
[    5.239382] msm_sensor_power_up index 4
[    5.242173] msm_sensor_power_up type 1
[    5.289461] msm_sensor_power_up index 3
[    5.292250] msm_sensor_power_up type 0
[    5.302017] msm_sensor_power_up index 2
[    5.304808] msm_sensor_power_up type 2
[    5.319804] msm_sensor_power_up index 1
[    5.322596] msm_sensor_power_up type 2
[    5.337616] msm_sensor_power_up index 0
[    5.340430] msm_sensor_power_up type 2
[    5.355437] msm_sensor_i2c_probe gc2235 power up failed
[    5.359649] gc2235: probe of 6-0078 failed with error -107
[    5.365131] sp0a28_init_module:604
[    5.368871] sp0a28_init_module:609 rc -19
[    5.372525] msm_sp0a28_i2c_probe, E.
[    5.375937] msm_sensor_i2c_probe sp0a28_i2c_probe called
[    5.381426] msm_sensor_i2c_probe: of_node exisists
[    5.386010] msm_sensor_get_dt_data qcom,sensor-name sp0a28, rc 0
[    5.392192] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0
[    5.397727] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0
[    5.403648] msm_sensor_get_dt_data qcom,mount-angle 90, rc 0
[    5.409273] msm_sensor_get_dt_data qcom,cci-master 0, rc 0
[    5.414772] msm_sensor_get_sub_module_index:75 src_node NULL
[    5.420403] msm_sensor_get_sub_module_index:92 eeprom src_node NULL
[    5.426635] msm_sensor_get_sub_module_index:121 src_node NULL
[    5.432415] msm_sensor_get_sub_module_index csiphy_core[0] = 1
[    5.438181] msm_sensor_get_sub_module_index csid_core[0] = 1
[    5.443844] msm_sensor_get_dt_csi_data qcom,csi-lane-assign e4, rc 0
[    5.450178] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 3, rc 0
[    5.456234] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3
[    5.462417] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig
[    5.468213] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio
[    5.473962] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana
[    5.479778] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0
[    5.485400] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0
[    5.491061] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0
[    5.496685] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 2850000
[    5.503474] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[    5.510245] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000
[    5.516998] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 2850000
[    5.523786] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[    5.530558] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000
[    5.537312] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[    5.543666] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 200000
[    5.550002] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000
[    5.556271] msm_sensor_get_dt_data gpio count 3
[    5.560774] msm_sensor_get_dt_data gpio_array[0] = 13
[    5.565790] msm_sensor_get_dt_data gpio_array[1] = 15
[    5.570849] msm_sensor_get_dt_data gpio_array[2] = 85
[    5.575856] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 13
[    5.582556] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 15
[    5.589219] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 85
[    5.595924] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[    5.602606] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[    5.609271] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[    5.615977] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK
[    5.623441] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET
[    5.630819] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY
[    5.638356] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 15
[    5.643929] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 85
[    5.649490] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22
[    5.656497] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22
[    5.662937] msm_sensor_power_up:991
[    5.666403] msm_sensor_power_up index 0
[    5.670228] msm_sensor_power_up type 2
[    5.679403] msm_sensor_power_up index 1
[    5.682194] msm_sensor_power_up type 2
[    5.692267] msm_sensor_power_up index 2
[    5.695058] msm_sensor_power_up type 2
[    5.698873] 8110_l14: requested voltage range [2850000, 2850000] does not fit within constraints: [1800000, 1800000]
[    5.709318] msm_camera_config_single_vreg: cam_vdig set voltage failed
[    5.721895] msm_sensor_power_up index 3
[    5.724685] msm_sensor_power_up type 0
[    5.739466] msm_sensor_power_up index 4
[    5.742257] msm_sensor_power_up type 1
[    5.757011] msm_sensor_power_up index 5
[    5.759822] msm_sensor_power_up type 1
[    5.774557] msm_sensor_power_up index 6
[    5.777347] msm_sensor_power_up type 1
[    5.792121] msm_sensor_power_up index 7
[    5.794911] msm_sensor_power_up type 3
[    5.798645] sp0a28_match_id,  E. calling i2c_read:, i2c_addr:122, id_reg_addr:2
[    5.806230] sp0a28_match_id: read  id: a2 ; expected id: 0xa2
[    5.811685] msm_sensor_power_up exit
[    5.815225] msm_sensor_i2c_probe sp0a28 probe succeeded
[    5.820701] msm_sensor_i2c_probe rc 0 session_id 1
[    5.825314] msm_sensor_i2c_probe:2087
[    5.828865] s_ctrl->sensordata->camera_type = 1
[    5.833390] msm_sensor_power_down:1161
[    5.837099] msm_sensor_power_down index 7
[    5.841112] msm_sensor_power_down type 3
[    5.844998] msm_sensor_power_down index 6
[    5.848991] msm_sensor_power_down type 1
[    5.863939] msm_sensor_power_down index 5
[    5.866903] msm_sensor_power_down type 1
[    5.881853] msm_sensor_power_down index 4
[    5.884816] msm_sensor_power_down type 1
[    5.899744] msm_sensor_power_down index 3
[    5.902708] msm_sensor_power_down type 0
[    5.917645] msm_sensor_power_down index 2
[    5.920629] msm_sensor_power_down type 2
[    5.930534] msm_sensor_power_down index 1
[    5.933499] msm_sensor_power_down type 2
[    5.943698] msm_sensor_power_down index 0
[    5.946662] msm_sensor_power_down type 2
[    5.956839] msm_sensor_power_down exit
[    5.962567] lirc_dev: IR Remote Control driver registered, major 241
[    5.967965] IR NEC protocol handler initialized
[    5.972509] IR RC5(x) protocol handler initialized
[    5.977253] IR RC6 protocol handler initialized
[    5.981785] IR JVC protocol handler initialized
[    5.986280] IR Sony protocol handler initialized
[    5.990900] IR RC5 (streamzap) protocol handler initialized
[    5.996436] IR SANYO protocol handler initialized
[    6.001143] IR MCE Keyboard/mouse protocol handler initialized
[    6.006940] IR LIRC bridge handler initialized
[    6.011932] BMS: qpnp_bms_init: QPNP BMS INIT
[    6.015788] spmi qpnp-bms-de519600: Driver qcom,qpnp-bms requests probe deferral
[    6.023264] spmi qpnp-charger-de518800: Driver qcom,qpnp-charger requests probe deferral
[    6.068832] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.077438] cpuidle: using governor ladder
[    6.081135] cpuidle: using governor menu
[    6.084436] sdhci: Secure Digital Host Controller Interface driver
[    6.090586] sdhci: Copyright(c) Pierre Ossman
[    6.095372] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.100968] AXI: get_pdata(): Error: Client name not found
[    6.106013] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    6.114627] mmc0: no vmmc regulator found
[    6.119955] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[    6.125886] AXI: get_pdata(): Error: Client name not found
[    6.131107] AXI: msm_bus_cl_get_pdata(): Error getting bus pdata!
[    6.140325] mmc1: no vmmc regulator found
[    6.145630] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[    6.153191] zram: Created 1 device(s) ...
[    6.160864] ashmem: initialized
[    6.163069] logger: created 256K log 'log_main'
[    6.169621] logger: created 256K log 'log_events'
[    6.175387] logger: created 256K log 'log_radio'
[    6.181129] logger: created 256K log 'log_system'
[    6.189474] sps:BAM 0xf9a44000 is registered.
[    6.194641] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    6.203190] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
[    6.212794] input: qpnp_pon as /devices/virtual/input/input3
[    6.220171] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[    6.224559] coresight-fuse fc4be024.fuse: Fuse initialized
[    6.230250] coresight-cti fc310000.cti: CTI initialized
[    6.235100] coresight-cti fc311000.cti: CTI initialized
[    6.240354] coresight-cti fc312000.cti: CTI initialized
[    6.245496] coresight-cti fc313000.cti: CTI initialized
[    6.250739] coresight-cti fc314000.cti: CTI initialized
[    6.255943] coresight-cti fc315000.cti: CTI initialized
[    6.261156] coresight-cti fc316000.cti: CTI initialized
[    6.266329] coresight-cti fc317000.cti: CTI initialized
[    6.271592] coresight-cti fc318000.cti: CTI initialized
[    6.276779] coresight-cti fc351000.cti: CTI initialized
[    6.282048] coresight-cti fc352000.cti: CTI initialized
[    6.287200] coresight-cti fc353000.cti: CTI initialized
[    6.292433] coresight-cti fc354000.cti: CTI initialized
[    6.297589] coresight-cti fc335000.cti: CTI initialized
[    6.302825] coresight-cti fc338000.cti: CTI initialized
[    6.307898] mmc0: BKOPS_EN bit = 0
[    6.308030] coresight-cti fc33c000.cti: CTI initialized
[    6.308188] coresight-cti fc360000.cti: CTI initialized
[    6.308661] coresight-csr fc301000.csr: CSR initialized
[    6.329832] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[    6.335208] sps:BAM 0xfc37c000 is registered.
[    6.339658] coresight-tmc fc326000.tmc: TMC initialized
[    6.345150] coresight-tmc fc325000.tmc: TMC initialized
[    6.350726] coresight-tpiu fc320000.tpiu: seta gpios not specified
[    6.356091] coresight-tpiu fc320000.tpiu: setb gpios not specified
[    6.362427] coresight-tpiu fc320000.tpiu: TPIU initialized
[    6.368453] coresight-funnel fc323000.funnel: FUNNEL initialized
[    6.373880] coresight-funnel fc321000.funnel: FUNNEL initialized
[    6.379873] coresight-funnel fc322000.funnel: FUNNEL initialized
[    6.385850] coresight-funnel fc355000.funnel: FUNNEL initialized
[    6.391739] mmc0: new HS200 MMC card at address 0001
[    6.392171] coresight-replicator fc324000.replicator: REPLICATOR initialized
[    6.392796] coresight-stm fc302000.stm: STM initialized
[    6.393308] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[    6.393997] coresight-etm fc34c000.etm: ETM initialized
[    6.421810] coresight-etm fc34d000.etm: ETM initialized
[    6.426873] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
[    6.427202] coresight-etm fc34e000.etm: ETM initialized
[    6.427543] coresight-etm fc34f000.etm: ETM initialized
[    6.428122] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[    6.428617] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[    6.429100] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[    6.429674] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[    6.430863] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.430883] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.438206] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[    6.438779] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    6.439612] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.440012] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.443010] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.443356] Netfilter messages via NETLINK v0.30.
[    6.443473] nf_conntrack version 0.5.0 (6339 buckets, 25356 max)
[    6.444229] ctnetlink v0.93: registering with nfnetlink.
[    6.444638] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    6.444646] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    6.444949] xt_time: kernel timezone is -0000
[    6.445390] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.445711] arp_tables: (C) 2002 David S. Miller
[    6.445784] TCP: cubic registered
[    6.446607] NET: Registered protocol family 10
[    6.450086] Mobile IPv6
[    6.450132] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.450328] IPv6 over IPv4 tunneling driver
[    6.451013] NET: Registered protocol family 17
[    6.451140] Bridge firewalling registered
[    6.451159] Ebtables v2.0 registered
[    6.592827] Bluetooth: RFCOMM TTY layer initialized
[    6.597655] Bluetooth: RFCOMM socket layer initialized
[    6.597679] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[    6.608570] Bluetooth: RFCOMM ver 1.11
[    6.612340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.617549] Bluetooth: BNEP filters: protocol multicast
[    6.622781] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.622934]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22
[    6.638252] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    6.645424] Registering SWP/SWPB emulation handler
[    6.655989] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    6.656691] input: gpio-keys as /devices/gpio_keys.60/input/input4
[    6.657136] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.676533] qcom,qpnp-rtc qpnp-rtc-de519800: setting system clock to 1970-01-01 00:36:00 UTC (2160)
[    6.676820] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.676828] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.676846] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
[    6.677056] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[    6.677064] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[    6.677079] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
[    6.677168] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    6.677183] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    6.682272] batfet:
[    6.693061] qcom,qpnp-charger:qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 0 batt_present = 7
[    6.700841] qcom,qpnp-charger:qpnp_chg_iusbmax_set: bad mA=0 asked to set
[    6.745034] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.776810] clock_late_init: Removing enables held for handed-off clocks
[    6.785491] ALSA device list:
[    6.789613]   No soundcards fou    6.792763] Freeing init memory: 72K
[    6.804747] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.838669] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.845934] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.854204] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.880327] type=1403 audit(2160.720:2): policy loaded auid=4294967295 ses=4294967295
[    6.887336] SELinux: Loaded policy from (null)
[    6.893474] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.898043] init: /init.qcom.rc: 259: ignored duplicate definition of service 'usbhub_init'
[    6.898786] init: /init.qcom.rc: 672: invalid command '/system/bin/log'
[    6.901677] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    6.907736] init: invalid uid 'fm_radio'
[    6.928943] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.936480] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.937651] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[    6.951130] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    6.999537] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    7.006767] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    7.014898] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    7.023187] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    7.055341] qcom,qpnp-rtc qpnp-rtc-de519800: secs = 2160, h:m:s == 0:36:0, d/m/y = 1/0/70
[    7.062575] BMS: qpnp_bms_probe: probe success: soc =100 vbatt = 4060344 ocv = 4057116 r_sense_uohm = 9406 warm_reset = 1
[    7.073838] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    7.081271] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    7.089714] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    7.096223] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    7.103772] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    7.581828] init: cannot open '/initlogo.rle'
[    7.680509] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.693536] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    7.709451] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
[    7.749039] e2fsck used greatest stack depth: 5328 bytes left
[    7.753825] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    7.758352] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1015/131072 files, 49722/524288 blocks
[    7.774538] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    7.788172] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.796192] EXT4-fs (mmcblk0p21): <<<<<wzg Opt_gid
[    7.804375] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: gid=1015
[    7.811752] SELinux:  Context u:object_r:blinkfeed_file:s0 is not valid (left unmapped).
[    7.824582] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.880056] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    7.890008] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[    7.907392] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0c500000 to 0x0d200000
[    8.083971] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
[    8.136041] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    8.149364] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
[    8.158527] apr_tal:Q6 Is Up
[    8.160489] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[    8.160544] diag: In diag_send_msg_mask_update, invalid status 0
[    8.160554] diag: In diag_send_log_mask_update, invalid status 0
[    8.160658] adsp-loader qcom,msm-adsp-loader.29: adsp_loader_do: Q6/ADSP image is loaded
[    8.188563] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[    8.196292] platform sound.37: Driver msm8x10-asoc-wcd requests probe deferral
[    8.529700] wcnss_wlan triggered by userspace
[    8.560067] wcnss_trigger_config:  adc get failed
[    8.563665] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.564591] init: cannot find '/system/bin/nac_server', disabling 'nac_server'
[    8.568621] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[    8.664951] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d6ee000
[    8.731371] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
[    8.742218] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
shell@msm8610:/ $ [    8.774875] cp used greatest stack depth: 5068 bytes left
[    9.246389] diag: In diag_send_msg_mask_update, invalid status 0
[    9.251851] diag: In diag_send_log_mask_update, invalid status 0
[    9.261223] sp0a28_sensor_config:632 sp0a28 cfgtype = 8
[    9.262615] init: untracked pid 274 exited
[    9.270184] sp0a28_sensor_config:644 sensor name sp0a28
[    9.274705] sp0a28_sensor_config:646 session id 1
[    9.279418] sp0a28_sensor_config:649 subdev_id[0] -1
[    9.284362] sp0a28_sensor_config:649 subdev_id[1] -1
[    9.289316] sp0a28_sensor_config:649 subdev_id[2] -1
[    9.294340] sp0a28_sensor_config:649 subdev_id[3] -1
[    9.299180] sp0a28_sensor_config:649 subdev_id[4] -1
[    9.304169] sp0a28_sensor_config:649 subdev_id[5] -1
[    9.309077] sp0a28_sensor_config:649 subdev_id[6] 1
[    9.315171] sp0a28_sensor_config:649 subdev_id[7] -1
[    9.319095] sp0a28_sensor_config:649 subdev_id[8] 1
[    9.325419] sp0a28_sensor_config:649 subdev_id[9] -1
[    9.329443] sp0a28_sensor_config:632 sp0a28 cfgtype = 9
[    9.332533] enable_store: android_usb: already disabled
[    9.339865] sp0a28_sensor_config:686 init params mode 0 pos 1 mount 90
[    9.344608] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.350647] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    9.366561] Error: Driver 'DS' is already registered, aborting...
[    9.369535] msm8x10-wcd-i2c-core msm8x10_wcd_codec: dapm: unknown pin Lineout amp
[    9.390894] msm_isp_close_node: halt timeout rc=0
[    9.433343] wcnss: no space available for smd frame
[    9.462217] wcnss: no space available for smd frame
[    9.489564] wcnss: no space available for smd frame
[    9.519568] wcnss: no space available for smd frame
[    9.549848] msm_tsens_get_temp: tsens mapping index not found
[    9.554663] wcnss: not setting up vbatt
[    9.558765] msm_tsens_get_temp: tsens mapping index not found
[    9.564241] msm_tsens_get_temp: tsens mapping index not found
[    9.570039] msm_tsens_get_temp: tsens mapping index not found
[    9.575578] msm_tsens_get_temp: tsens mapping index not found
[    9.581418] msm_tsens_get_temp: tsens mapping index not found
[    9.632222] init: untracked pid 384 exited
[    9.819425] ------------[ cut here ]------------
[    9.819454] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[    9.819462] Unbalanced enable for IRQ 330
[    9.819681] ---[ end trace 8ecd75e0473f590f ]---
[   10.049436] ------------[ cut here ]------------
[   10.049464] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[   10.049471] Unbalanced enable for IRQ 330
[   10.049703] ---[ end trace 8ecd75e0473f5910 ]---
[   10.373312] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=d8a5fcc0
[   10.742560] Notify: smsm init
[   10.776155] msm_ipc_router_send_control_msg: xprt_info not initialized
[   10.776652] msm_ipc_router_send_control_msg: xprt_info not initialized
[   11.017590] diag: In diag_send_msg_mask_update, invalid status 0
[   11.022510] diag: In diag_send_log_mask_update, invalid status 0
[   16.001613] ------------[ cut here ]------------
[   16.005224] WARNING: at /home/xxx/work/e5255_htc/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[   16.016317] ---[ end trace 8ecd75e0473f5911 ]---
[   16.115556] dsi_panel_handler enable=0
[   16.367570] dsi_panel_handler enable=1
[   22.375560] pgd = dcdb0000
[   22.377839] [00000001] *pgd=00000000
[   22.431988] pgd = dcdb0000
[   22.433695] [00000001] *pgd=00000000
[   22.601208] pgd = dcdb0000
[   22.603487] [00000001] *pgd=00000000
[   24.095997] BootAnimation used greatest stack depth: 5004 bytes left
[   30.086892] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   30.117510] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   30.134833] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   30.141600] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   30.342734] pgd = dd7fc000
[   30.345631] [b30f1ab8] *pgd=13fd0831, *pte=00000000, *ppte=00000000
[   30.354994] pgd = dd7fc000
[   30.356917] [b30f1ab8] *pgd=13fd0831, *pte=00000000, *ppte=00000000
[   30.837911] pgd = dd7fc000
[   30.839822] [b30f1ab8] *pgd=13fd0831, *pte=00000000, *ppte=00000000
[   31.165184] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dd53fcc0
[   37.462104] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   37.479070] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   37.493942] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   37.500626] init: sys_prop: permission denied uid:1013  name:camera.4k2k.enable
[   46.028712] dsi_panel_handler enable=0
[   49.946561] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 8192
[   49.953501] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 12288
[   49.961463] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 11
[   49.969165] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   49.975527] QSEECOM: qseecom_receive_req: Interrupted: exiting Listener Service = 10
[   49.995925] pgd = c411c000
[   49.997600] [b4199ab8] *pgd=00000000
[   50.007896] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   50.013437] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   50.019780] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[   50.148962] dsi_panel_handler enable=1
[   50.152579] pgd = c411c000
[   50.152588] [b4199ab8] *pgd=00000000
[   50.389438] ------------[ cut here ]------------
[   50.393271] WARNING: at /home/xxx/work/e5255_htc/kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
[   50.402724] Unbalanced enable for IRQ 330
[   50.406898] ---[ end trace 8ecd75e0473f5912 ]---
[   50.532047] pgd = c411c000
[   50.533726] [b4199ab8] *pgd=00000000
[   50.743611] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=18 handle=dcd3ba40