2000
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]
[Huawei]sys
[Huawei]sysname R1
[R1]
[R1]
[R1]
[R1]inte
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]ip add
[R1-GigabitEthernet0/0/0]ip address d
^
Error:Ambiguous command found at '^' position.
[R1-GigabitEthernet0/0/0]ip add
[R1-GigabitEthernet0/0/0]ip address 123.1.1.1 24
[R1-GigabitEthernet0/0/0]
Jul 19 2021 10:03:00-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]q
[R1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R1>sys
<R1>system-view
Enter system view, return user view with Ctrl+Z.
[R1]int
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]ip add
[R1-GigabitEthernet0/0/0]ip address 123.1.1.1 24
Error: The address already exists.
[R1-GigabitEthernet0/0/0]q
[R1]
[R1]rip 1
[R1-rip-1]vers
[R1-rip-1]version 2
[R1-rip-1]net
[R1-rip-1]network 123.0.0.0
[R1-rip-1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R1>
<R1>dis
<R1>display
<R1>display ip rou
<R1>display ip routing-table
<R1>display ip routing-table pr
<R1>display ip routing-table protocol ri
<R1>display ip routing-table protocol rip
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : RIP
Destinations : 10 Routes : 11
RIP routing table status : <Active>
Destinations : 10 Routes : 11
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 RIP 100 2 D 123.1.1.5 GigabitEthernet0/0/0
23.1.1.0/24 RIP 100 1 D 123.1.1.2 GigabitEthernet0/0/0
34.1.1.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet0/0/0
RIP 100 2 D 123.1.1.5 GigabitEthernet0/0/0
45.1.1.0/24 RIP 100 1 D 123.1.1.5 GigabitEthernet0/0/0
192.168.1.0/25 RIP 100 1 D 123.1.1.2 GigabitEthernet0/0/0
192.168.1.128/25 RIP 100 1 D 123.1.1.2 GigabitEthernet0/0/0
192.168.2.0/25 RIP 100 2 D 123.1.1.2 GigabitEthernet0/0/0
192.168.2.128/25 RIP 100 2 D 123.1.1.2 GigabitEthernet0/0/0
192.168.3.0/25 RIP 100 2 D 123.1.1.5 GigabitEthernet0/0/0
192.168.3.128/25 RIP 100 2 D 123.1.1.5 GigabitEthernet0/0/0
RIP routing table status : <Inactive>
Destinations : 0 Routes : 0
<R1>
<R1>
<R1>ping 100.1.1.1
PING 100.1.1.1: 56 data bytes, press CTRL_C to break
Request time out
Reply from 100.1.1.1: bytes=56 Sequence=2 ttl=254 time=70 ms
Reply from 100.1.1.1: bytes=56 Sequence=3 ttl=254 time=70 ms
Reply from 100.1.1.1: bytes=56 Sequence=4 ttl=254 time=50 ms
Reply from 100.1.1.1: bytes=56 Sequence=5 ttl=254 time=40 ms
--- 100.1.1.1 ping statistics ---
5 packet(s) transmitted
4 packet(s) received
20.00% packet loss
round-trip min/avg/max = 40/57/70 ms
<R1>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R1>
<R1>dis
<R1>display ip
<R1>display ipr
<R1>display ip r
<R1>display ip routing-table p
<R1>display ip routing-table protocol r
<R1>display ip routing-table protocol rip
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : RIP
Destinations : 9 Routes : 10
RIP routing table status : <Active>
Destinations : 9 Routes : 10
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 RIP 100 2 D 123.1.1.5 GigabitEthernet0/0/0
23.1.1.0/24 RIP 100 1 D 123.1.1.2 GigabitEthernet0/0/0
34.1.1.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet0/0/0
RIP 100 2 D 123.1.1.5 GigabitEthernet0/0/0
45.1.1.0/24 RIP 100 1 D 123.1.1.5 GigabitEthernet0/0/0
192.168.1.0/24 RIP 100 1 D 123.1.1.2 GigabitEthernet0/0/0
192.168.2.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet0/0/0
192.168.2.0/25 RIP 100 3 D 123.1.1.5 GigabitEthernet0/0/0
192.168.2.128/25 RIP 100 3 D 123.1.1.5 GigabitEthernet0/0/0
192.168.3.0/24 RIP 100 2 D 123.1.1.5 GigabitEthernet0/0/0
RIP routing table status : <Inactive>
Destinations : 0 Routes : 0
<R1>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]
[R1]
[R1]q
<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]q
<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]rip
[R1-rip-1]version 2
[R1-rip-1]timers rip 15 90 60
[R1-rip-1]q
[R1]q
<R1>dis rip
Public VPN-instance
RIP process : 1
RIP version : 2
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Host-route : Enabled
Maximum number of balanced paths : 8
Update time : 15 sec Age time : 90 sec
Garbage-collect time : 60 sec
Graceful restart : Disabled
BFD : Disabled
Silent-interfaces : None
Default-route : Disabled
Verify-source : Enabled
Networks :
123.0.0.0
Configured peers : None
Number of routes in database : 12
Number of interfaces enabled : 1
Triggered updates sent : 0
Number of route changes : 53
Number of replies to queries : 2
<R1>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
2002
<Huawei>
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R2
[R2]
[R2]int
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]
[R2-GigabitEthernet0/0/0]ip add
[R2-GigabitEthernet0/0/0]ip address 123.1.1.2 24
Jul 19 2021 10:03:37-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]
[R2-GigabitEthernet0/0/0]
[R2-GigabitEthernet0/0/0]q
[R2]
[R2]int
[R2]interface g0/0/1
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]ip add
[R2-GigabitEthernet0/0/1]ip address 23.1.1.2 24
Jul 19 2021 10:04:07-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]q
[R2]
[R2]
[R2]int
[R2]interface loo
^
Error:Incomplete command found at '^' position.
[R2]int
[R2]interface loo
[R2]interface LoopBack 0
[R2-LoopBack0]ip add
[R2-LoopBack0]ip address 192.168.1.1 25
[R2-LoopBack0]
[R2-LoopBack0]q
[R2]int
[R2]interface
[R2]interface loo
[R2]interface LoopBack
^
Error:Incomplete command found at '^' position.
[R2]int
[R2]interface loo
[R2]interface LoopBack 1
[R2-LoopBack1]
[R2-LoopBack1]
[R2-LoopBack1]
[R2-LoopBack1]ip add
[R2-LoopBack1]ip address 192.168.1.129 25
[R2-LoopBack1]
[R2-LoopBack1]
[R2-LoopBack1]q
[R2]
[R2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R2>
<R2>
<R2>
<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]
[R2]rip 1
[R2-rip-1]vers
^
Error:Incomplete command found at '^' position.
[R2-rip-1]vers
[R2-rip-1]version 2
[R2-rip-1]net
[R2-rip-1]network 123.0.0.0
[R2-rip-1]
[R2-rip-1]net
[R2-rip-1]network 23.0.0.0
[R2-rip-1]net
[R2-rip-1]network 192.168.1.0
[R2-rip-1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R2>
<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]int
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]
[R2-GigabitEthernet0/0/0]rip su
[R2-GigabitEthernet0/0/0]rip summary-address 192.168.1.0 255.255.255.0
[R2-GigabitEthernet0/0/0]q
[R2]
[R2]
[R2]int
[R2]interface g0/0/1
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]ripsu
[R2-GigabitEthernet0/0/1]rip su
[R2-GigabitEthernet0/0/1]rip summary-address 192.168.1.0 255.255.255.0
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]2
^
Error: Unrecognized command found at '^' position.
[R2-GigabitEthernet0/0/1]q
[R2]ip rou
[R2]ip route
[R2]ip route-static192.168.1.0 24 null0
^
Error: Unrecognized command found at '^' position.
[R2]ip rou
[R2]ip route
[R2]ip route-static 192.168.1.0 24nul
[R2]ip route-static 192.168.1.0 24 nul
[R2]ip route-static 192.168.1.0 24 NULL 0
[R2]
[R2]
[R2]int
[R2]interface g0/0/1
[R2-GigabitEthernet0/0/1]rip au
[R2-GigabitEthernet0/0/1]rip authentication-mode si
[R2-GigabitEthernet0/0/1]rip authentication-mode simple c
^
Error:Incomplete command found at '^' position.
[R2-GigabitEthernet0/0/1]rip
[R2-GigabitEthernet0/0/1]rip su
[R2-GigabitEthernet0/0/1]rip summary-address si
[R2-GigabitEthernet0/0/1]rip summary-address
[R2-GigabitEthernet0/0/1]rip au
[R2-GigabitEthernet0/0/1]rip authentication-mode si
[R2-GigabitEthernet0/0/1]rip authentication-mode simple c
[R2-GigabitEthernet0/0/1]rip authentication-mode simple cipher
^
Error:Incomplete command found at '^' position.
[R2-GigabitEthernet0/0/1]rip
[R2-GigabitEthernet0/0/1]rip au
[R2-GigabitEthernet0/0/1]rip authentication-mode
[R2-GigabitEthernet0/0/1]rip authentication-mode si
[R2-GigabitEthernet0/0/1]rip authentication-mode simple huawei
[R2-GigabitEthernet0/0/1]sys
^
Error: Unrecognized command found at '^' position.
[R2-GigabitEthernet0/0/1]sys
^
Error: Unrecognized command found at '^' position.
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]q
[R2]q
<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]q
<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]rip
[R2-rip-1]version 2
[R2-rip-1]timers rip 15 90 60
[R2-rip-1]q
[R2]q
<R2>dis rip
Public VPN-instance
RIP process : 1
RIP version : 2
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Host-route : Enabled
Maximum number of balanced paths : 8
Update time : 15 sec Age time : 90 sec
Garbage-collect time : 60 sec
Graceful restart : Disabled
BFD : Disabled
Silent-interfaces : None
Default-route : Disabled
Verify-source : Enabled
Networks :
192.168.1.0 23.0.0.0
123.0.0.0
Configured peers : None
Number of routes in database : 15
Number of interfaces enabled : 4
Triggered updates sent : 14
Number of route changes : 35
2003
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]
[Huawei]
[Huawei]sys
[Huawei]sysname R3
[R3]
[R3]
[R3]
[R3]
[R3]int
[R3]interface
^
Error:Incomplete command found at '^' position.
[R3]int
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]ip add
[R3-GigabitEthernet0/0/0]ip address 23.1.1.3 24
Jul 19 2021 10:04:57-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]q
[R3]int
[R3]interface
^
Error:Incomplete command found at '^' position.
[R3]
[R3]int
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]ip add
[R3-GigabitEthernet0/0/1]ip address 34.1.1..3 24
^
Error: Wrong parameter found at '^' position.
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]q
[R3]int
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]ip add
[R3-GigabitEthernet0/0/1]ip address 34.1.1.3 24
Jul 19 2021 10:06:15-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]q
[R3]
[R3]int
[R3]interface loo
[R3]interface LoopBack 0
[R3-LoopBack0]
[R3-LoopBack0]
[R3-LoopBack0]ip add
[R3-LoopBack0]ip address 192.168.2.1 25
[R3-LoopBack0]
[R3-LoopBack0]q
[R3]int
[R3]interface loo
[R3]interface LoopBack 1
[R3-LoopBack1]
[R3-LoopBack1]ip add
[R3-LoopBack1]ip address 192.168.2.129 25
[R3-LoopBack1]
[R3-LoopBack1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R3>ys
^
Error: Unrecognized command found at '^' position.
<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]
[R3]rip 1
[R3-rip-1]vers
[R3-rip-1]version 2
[R3-rip-1]net
^
Error:Incomplete command found at '^' position.
[R3-rip-1]net
[R3-rip-1]network 23.0.0.0
[R3-rip-1]net
[R3-rip-1]network 34.0.0.0
[R3-rip-1]net
^
Error:Incomplete command found at '^' position.
[R3-rip-1]net
[R3-rip-1]network 192.168.2.0
[R3-rip-1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R3>sys
<R3>system-view
<R3>system-view
Enter system view, return user view with Ctrl+Z.
[R3]
[R3]init
[R3]int
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]rip su
[R3-GigabitEthernet0/0/0]rip summary-address 192.168.2.0 255.255.255.0
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]a
^
Error:Ambiguous command found at '^' position.
[R3-GigabitEthernet0/0/0]q
[R3]int
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]rip
[R3-GigabitEthernet0/0/1]ripsu
[R3-GigabitEthernet0/0/1]rip su
[R3-GigabitEthernet0/0/1]rip summary-address 192.168.2.0 255.255.255.0
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]q
[R3]ip rou
[R3]ip route
[R3]ip route-static 192.168.2.0 24 nul
[R3]ip route-static 192.168.2.0 24 NULL 0
[R3]
[R3]int
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]rip
[R3-GigabitEthernet0/0/0]rip au
[R3-GigabitEthernet0/0/0]rip authentication-mode si
[R3-GigabitEthernet0/0/0]rip authentication-mode simple c
[R3-GigabitEthernet0/0/0]rip authentication-mode simple cipher huawei
[R3-GigabitEthernet0/0/0]rip authentication-mode simple cipher huawei
[R3-GigabitEthernet0/0/0]sys
^
Error: Unrecognized command found at '^' position.
[R3-GigabitEthernet0/0/0]sys
^
Error: Unrecognized command found at '^' position.
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]q
[R3]q
<R3>qsys
^
Error: Unrecognized command found at '^' position.
<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]rip
[R3-rip-1]version 2
[R3-rip-1]timers rip 15 90 60
[R3-rip-1]q
[R3]q
<R3>dis rip
Public VPN-instance
RIP process : 1
RIP version : 2
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Host-route : Enabled
Maximum number of balanced paths : 8
Update time : 15 sec Age time : 90 sec
Garbage-collect time : 60 sec
Graceful restart : Disabled
BFD : Disabled
Silent-interfaces : None
Default-route : Disabled
Verify-source : Enabled
Networks :
192.168.2.0 34.0.0.0
23.0.0.0
Configured peers : None
Number of routes in database : 14
Number of interfaces enabled : 4
Triggered updates sent : 7
Number of route changes : 29
<R3>
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]
[Huawei]
[Huawei]sys
[Huawei]sysname R3
[R3]
[R3]
[R3]
[R3]
[R3]int
[R3]interface
^
Error:Incomplete command found at '^' position.
[R3]int
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]ip add
[R3-GigabitEthernet0/0/0]ip address 23.1.1.3 24
Jul 19 2021 10:04:57-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]q
[R3]int
[R3]interface
^
Error:Incomplete command found at '^' position.
[R3]
[R3]int
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]ip add
[R3-GigabitEthernet0/0/1]ip address 34.1.1..3 24
^
Error: Wrong parameter found at '^' position.
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]q
[R3]int
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]ip add
[R3-GigabitEthernet0/0/1]ip address 34.1.1.3 24
Jul 19 2021 10:06:15-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]q
[R3]
[R3]int
[R3]interface loo
[R3]interface LoopBack 0
[R3-LoopBack0]
[R3-LoopBack0]
[R3-LoopBack0]ip add
[R3-LoopBack0]ip address 192.168.2.1 25
[R3-LoopBack0]
[R3-LoopBack0]q
[R3]int
[R3]interface loo
[R3]interface LoopBack 1
[R3-LoopBack1]
[R3-LoopBack1]ip add
[R3-LoopBack1]ip address 192.168.2.129 25
[R3-LoopBack1]
[R3-LoopBack1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R3>ys
^
Error: Unrecognized command found at '^' position.
<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]
[R3]rip 1
[R3-rip-1]vers
[R3-rip-1]version 2
[R3-rip-1]net
^
Error:Incomplete command found at '^' position.
[R3-rip-1]net
[R3-rip-1]network 23.0.0.0
[R3-rip-1]net
[R3-rip-1]network 34.0.0.0
[R3-rip-1]net
^
Error:Incomplete command found at '^' position.
[R3-rip-1]net
[R3-rip-1]network 192.168.2.0
[R3-rip-1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R3>sys
<R3>system-view
<R3>system-view
Enter system view, return user view with Ctrl+Z.
[R3]
[R3]init
[R3]int
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]rip su
[R3-GigabitEthernet0/0/0]rip summary-address 192.168.2.0 255.255.255.0
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]a
^
Error:Ambiguous command found at '^' position.
[R3-GigabitEthernet0/0/0]q
[R3]int
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]rip
[R3-GigabitEthernet0/0/1]ripsu
[R3-GigabitEthernet0/0/1]rip su
[R3-GigabitEthernet0/0/1]rip summary-address 192.168.2.0 255.255.255.0
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]q
[R3]ip rou
[R3]ip route
[R3]ip route-static 192.168.2.0 24 nul
[R3]ip route-static 192.168.2.0 24 NULL 0
[R3]
[R3]int
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]rip
[R3-GigabitEthernet0/0/0]rip au
[R3-GigabitEthernet0/0/0]rip authentication-mode si
[R3-GigabitEthernet0/0/0]rip authentication-mode simple c
[R3-GigabitEthernet0/0/0]rip authentication-mode simple cipher huawei
[R3-GigabitEthernet0/0/0]rip authentication-mode simple cipher huawei
[R3-GigabitEthernet0/0/0]sys
^
Error: Unrecognized command found at '^' position.
[R3-GigabitEthernet0/0/0]sys
^
Error: Unrecognized command found at '^' position.
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]q
[R3]q
<R3>qsys
^
Error: Unrecognized command found at '^' position.
<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]rip
[R3-rip-1]version 2
[R3-rip-1]timers rip 15 90 60
[R3-rip-1]q
[R3]q
<R3>dis rip
Public VPN-instance
RIP process : 1
RIP version : 2
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Host-route : Enabled
Maximum number of balanced paths : 8
Update time : 15 sec Age time : 90 sec
Garbage-collect time : 60 sec
Graceful restart : Disabled
BFD : Disabled
Silent-interfaces : None
Default-route : Disabled
Verify-source : Enabled
Networks :
192.168.2.0 34.0.0.0
23.0.0.0
Configured peers : None
Number of routes in database : 14
Number of interfaces enabled : 4
Triggered updates sent : 7
Number of route changes : 29
<R3>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
2004
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]
[Huawei]sys
[Huawei]sysname R4
[R4]
[R4]
[R4]
[R4]
[R4]int
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]
[R4-GigabitEthernet0/0/0]
[R4-GigabitEthernet0/0/0]ip int
[R4-GigabitEthernet0/0/0]ip add
[R4-GigabitEthernet0/0/0]ip address 34.1.1.4 24
Jul 19 2021 10:07:01-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[R4-GigabitEthernet0/0/0]
[R4-GigabitEthernet0/0/0]
[R4-GigabitEthernet0/0/0]q
[R4] int
[R4]interface g0/0/1
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]ip add
[R4-GigabitEthernet0/0/1]ip address 45.1.1.4 24
Jul 19 2021 10:07:22-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]q
[R4]
[R4]
[R4]int
[R4]interface loo
[R4]interface LoopBack 0
[R4-LoopBack0]undo interface LoopBack 0
^
Error: Unrecognized command found at '^' position.
[R4-LoopBack0]q
[R4]undointerface LoopBack 0
^
Error: Unrecognized command found at '^' position.
[R4]undo interface LoopBack 0
Info: This operation may take a few seconds. Please wait for a moment...succeeded.
[R4]int
[R4]interface loo
[R4]interface LoopBack 90
[R4-LoopBack90]q
[R4]int
[R4]interface loo
[R4]interface LoopBack 0
[R4-LoopBack0]ip add
[R4-LoopBack0]ip address
^
Error:Incomplete command found at '^' position.
[R4-LoopBack0]ip add
[R4-LoopBack0]ip address 192.168.3.1 25
[R4-LoopBack0]
[R4-LoopBack0]int
[R4-LoopBack0]q
[R4]int
[R4]interface loo
[R4]interface LoopBack 1
[R4-LoopBack1]ip add
[R4-LoopBack1]ip address 192.168.3.129 25
[R4-LoopBack1]q
[R4]int
[R4]interface loop
[R4]interface LoopBack 2
[R4-LoopBack2]ip add
[R4-LoopBack2]ip address 100.1.1.1 24
[R4-LoopBack2]
[R4-LoopBack2]q
[R4]
[R4]tip 1
^
Error: Unrecognized command found at '^' position.
[R4]rip 1
[R4-rip-1]vers
[R4-rip-1]version 2
[R4-rip-1]net
[R4-rip-1]network 34.0.0.0
[R4-rip-1]
[R4-rip-1]net
[R4-rip-1]network 45.0.0.0
[R4-rip-1]net
[R4-rip-1]network 192.168.3.0
[R4-rip-1]de
[R4-rip-1]default-cost
[R4-rip-1]default-routeo
[R4-rip-1]default-route
[R4-rip-1]default-routeo
[R4-rip-1]default-route o
[R4-rip-1]default-route originate
[R4-rip-1]
[R4-rip-1]
[R4-rip-1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R4>
<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]
[R4]int
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]rip su
[R4-GigabitEthernet0/0/0]rip summary-address 192.168.3.0 255.255.255.0
[R4-GigabitEthernet0/0/0]q
[R4]int
[R4]interface g0/0/1
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]rip su
[R4-GigabitEthernet0/0/1]rip summary-address 192.168.3.0 255.255.255.0
[R4-GigabitEthernet0/0/1]q
[R4]
[R4]
[R4]ip rou
[R4]ip route
[R4]ip route-static 192.168.3.0 24 nul
[R4]ip route-static 192.168.3.0 24 NULL 0
[R4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]
[R4]
[R4]q
<R4>q
Configuration console exit, please press any key to log on
<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]rip
[R4-rip-1]version 2
[R4-rip-1]timers rip 15 90 60
[R4-rip-1]q
[R4]q
<R4>dis rip
Public VPN-instance
RIP process : 1
RIP version : 2
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Host-route : Enabled
Maximum number of balanced paths : 8
Update time : 15 sec Age time : 90 sec
Garbage-collect time : 60 sec
Graceful restart : Disabled
BFD : Disabled
Silent-interfaces : None
Default-route : Originate Always
Default-route Cost : 0
Verify-source : Enabled
Networks :
192.168.3.0 45.0.0.0
34.0.0.0
Configured peers : None
Number of routes in database : 14
Number of interfaces enabled : 4
Triggered updates sent : 9
2005
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]sys
^
Error:Incomplete command found at '^' position.
[Huawei]
[Huawei]sys
[Huawei]sysname
^
Error:Incomplete command found at '^' position.
[Huawei]sys
[Huawei]sysname R5
[R5]
[R5]
[R5]
[R5]
[R5]int
[R5]interface g0/0/0
[R5-GigabitEthernet0/0/0]
[R5-GigabitEthernet0/0/0]ip add
[R5-GigabitEthernet0/0/0]ip address 45.1.1.5 24
Jul 19 2021 10:08:12-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[R5-GigabitEthernet0/0/0]
[R5-GigabitEthernet0/0/0]
[R5-GigabitEthernet0/0/0]
[R5-GigabitEthernet0/0/0]q
[R5]int
[R5]interface g0/0/1
[R5-GigabitEthernet0/0/1]
[R5-GigabitEthernet0/0/1]
[R5-GigabitEthernet0/0/1]
[R5-GigabitEthernet0/0/1]ip add
[R5-GigabitEthernet0/0/1]ip address 123.1.1.5 24
Jul 19 2021 10:08:35-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[R5-GigabitEthernet0/0/1]
[R5-GigabitEthernet0/0/1]
[R5-GigabitEthernet0/0/1]q
[R5]
[R5]
[R5]
[R5]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R5>sys
Enter system view, return user view with Ctrl+Z.
[R5]
[R5]rip 1
[R5-rip-1]vers
[R5-rip-1]version 2
[R5-rip-1]
[R5-rip-1]net
[R5-rip-1]network 45.0.0.0
[R5-rip-1]net
[R5-rip-1]network 123.0.0.0
[R5-rip-1]
[R5-rip-1]
[R5-rip-1]
[R5-rip-1]net
[R5-rip-1]network 192.168.3.0
[R5-rip-1]
[R5-rip-1]undo network 192.168.3.0
[R5-rip-1]
[R5-rip-1]
[R5-rip-1]
[R5-rip-1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R5>sys
Enter system view, return user view with Ctrl+Z.
[R5]
[R5]
[R5]q
<R5>q
Configuration console exit, please press any key to log on
<R5>sys
Enter system view, return user view with Ctrl+Z.
[R5]rip
[R5-rip-1]version 2
[R5-rip-1]timers rip 15 90 60
[R5-rip-1]q
[R5]q
<R5>dis rip
Public VPN-instance
RIP process : 1
RIP version : 2
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Host-route : Enabled
Maximum number of balanced paths : 8
Update time : 15 sec Age time : 90 sec
Garbage-collect time : 60 sec
Graceful restart : Disabled
BFD : Disabled
Silent-interfaces : None
Default-route : Disabled
Verify-source : Enabled
Networks :
123.0.0.0 45.0.0.0
Configured peers : None
Number of routes in database : 12
Number of interfaces enabled : 2
Triggered updates sent : 11
Number of route changes : 52
Number of replies to queries : 0
<R5>