题目要求
拓扑图
R1
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r1-GigabitEthernet0/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=90 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=40 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/40/90 ms
[r1]ping 192.168.1.6
PING 192.168.1.6: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.6: bytes=56 Sequence=1 ttl=255 time=50 ms
Reply from 192.168.1.6: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 192.168.1.6: bytes=56 Sequence=3 ttl=255 time=20 ms
Reply from 192.168.1.6: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.1.6: bytes=56 Sequence=5 ttl=255 time=20 ms
--- 192.168.1.6 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/26/50 ms
[r1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ip rout
[r1]ip route-s
[r1]ip route-static 0.0.0.0 0 192.168.1.2
[r1]ip rout
[r1]ip route-s
[r1]ip route-static 0.0.0.0 0 192.168.1.6
[r1]ip rout
[r1]ip route-s
[r1]ip route-static 192.168.1.64 27 192.168.1.2
[r1]ip route-static 192.168.1.96 27 192.168.1.6
[r1]ip rout
[r1]ip route-s
[r1]ip route-static 192.168.1.8 30 192.168.1.2
[r1]ip route-static 192.168.1.12 30 192.168.1.6
[r1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ping 192.168.1.161
PING 192.168.1.161: 56 data bytes, press CTRL_C to break
Request time out
Reply from 192.168.1.161: bytes=56 Sequence=2 ttl=253 time=40 ms
Reply from 192.168.1.161: bytes=56 Sequence=3 ttl=253 time=40 ms
Reply from 192.168.1.161: bytes=56 Sequence=4 ttl=253 time=40 ms
Reply from 192.168.1.161: bytes=56 Sequence=5 ttl=253 time=40 ms
--- 192.168.1.161 ping statistics ---
5 packet(s) transmitted
4 packet(s) received
20.00% packet loss
round-trip min/avg/max = 40/40/40 ms
[r1]ping 192.168.1.129
PING 192.168.1.129: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.129: bytes=56 Sequence=1 ttl=254 time=30 ms
Reply from 192.168.1.129: bytes=56 Sequence=2 ttl=254 time=30 ms
Reply from 192.168.1.129: bytes=56 Sequence=3 ttl=254 time=30 ms
Reply from 192.168.1.129: bytes=56 Sequence=4 ttl=254 time=30 ms
Reply from 192.168.1.129: bytes=56 Sequence=5 ttl=254 time=30 ms
--- 192.168.1.129 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/30/30 ms
[r1]ping 6.6.6.6
PING 6.6.6.6: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 6.6.6.6 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
[r1]ping 192.168.1.14
PING 192.168.1.14: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.14: bytes=56 Sequence=1 ttl=254 time=20 ms
Reply from 192.168.1.14: bytes=56 Sequence=2 ttl=254 time=30 ms
Reply from 192.168.1.14: bytes=56 Sequence=3 ttl=254 time=30 ms
Reply from 192.168.1.14: bytes=56 Sequence=4 ttl=254 time=30 ms
Reply from 192.168.1.14: bytes=56 Sequence=5 ttl=254 time=20 ms
--- 192.168.1.14 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/26/30 ms
[r1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ip rout
[r1]ip route-s
[r1]ip route-static 192.168.1.32 27 nu
[r1]ip route-static 192.168.1.32 27 NULL 0
[r1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ping 6.6.6.6
PING 6.6.6.6: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 6.6.6.6 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
[r1]ping 6.6.6.6
PING 6.6.6.6: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 6.6.6.6 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
[r1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]aa
[r1-aaa]loc
[r1-aaa]local-user caomi p
[r1-aaa]local-user caomi pre
[r1-aaa]local-user caomi pri
[r1-aaa]local-user caomi privilege 15 c
[r1-aaa]local-user caomi privilege 15 ch
[r1-aaa]local-user caomi privilege le
[r1-aaa]local-user caomi privilege level 15 ch
[r1-aaa]local-user caomi privilege level 15 pass
[r1-aaa]local-user caomi privilege level 15 password c
[r1-aaa]local-user caomi privilege level 15 password cipher 1234
Info: Add a new user.
[r1-aaa]loc
[r1-aaa]local-user caomi se
[r1-aaa]local-user caomi service-type ta
[r1-aaa]local-user caomi service-type te
[r1-aaa]local-user caomi service-type telnet
[r1-aaa]q
[r1]user
[r1]user-in
[r1]user-interface vt
[r1]user-interface vty 0 4
[r1-ui-vty0-4]auth
[r1-ui-vty0-4]authentication-mode aaa
[r1-ui-vty0-4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>sav
<r1>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r1>
R2
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1
[r1]sysname r2
[r2]interf
[r2]interface l
[r2]interface LoopBack 0
[r2-LoopBack0]ip add
[r2-LoopBack0]ip address 192.168.1.65 28
[r2-LoopBack0]q
[r2]interf
[r2]interface l
[r2]interface LoopBack 1
[r2-LoopBack1]ip add
[r2-LoopBack1]ip address 192.168.1.81 28
[r2-LoopBack1]
[r2-LoopBack1]
[r2-LoopBack1]
[r2-LoopBack1]q
[r2]q
<r2>sav
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait........
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r2>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]interf
[r2]interface g
[r2]interface GigabitEthernet0/0/0
[r2-GigabitEthernet0/0/0]ip add
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 30
May 16 2021 20:09:29-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]q
[r2]interf
[r2]interface g
[r2]interface GigabitEthernet0/0/1
[r2-GigabitEthernet0/0/1]ip add
[r2-GigabitEthernet0/0/1]ip address 192.168.1.9 30
May 16 2021 20:09:56-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]ip rout
[r2]ip route-s
[r2]ip route-static 0.0.0.0 0 192.168.1.10
[r2]ip rout
[r2]ip route-s
[r2]ip route-static 192.168.1.32 27 192.168.1.1
[r2]ip route-static 192.168.1.94 27 192.168.1.1
Info: The destination address and mask of the configured static route mismatched
, and the static route 192.168.1.64/27 was generated.
[r2]ip route-static 192.168.1.96 27 192.168.1.1
[r2]ip route-static 192.168.1.96 27 192.168.1.9
Error: The next-hop address is invalid.
[r2]ip route-static 192.168.1.96 27 192.168.1.10
[r2]ip route-static 192.168.1.4 30 192.168.1.1
[r2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]ip rout
[r2]ip route-s
[r2]ip route-static 192.168.64 27 nu
[r2]ip route-static 192.168.64 27 null 0
^
Error: Wrong parameter found at '^' position.
[r2]ip route-static 192.168.1.64 27 nu
[r2]ip route-static 192.168.1.64 27 NULL 0
[r2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>sa
<r2>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r2>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
R3
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysnamer3
^
Error: Unrecognized command found at '^' position.
[Huawei]sysname r3
[r3]intrf
[r3]int
[r3]interface l
[r3]interface LoopBack 0
[r3-LoopBack0]ip add
[r3-LoopBack0]ip address 192.168.1.95 28
Error: The specified IP address is invalid.
[r3-LoopBack0]q
[r3]intrf
[r3]intr
[r3]inter
[r3]interface g
[r3]interface GigabitEthernet0/0/2
[r3-GigabitEthernet0/0/2]ip add
[r3-GigabitEthernet0/0/2]ip address 192.168.1.97 27
May 16 2021 19:54:58-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r3-GigabitEthernet0/0/2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]interf
[r3]interface g
[r3]interface GigabitEthernet0/0/0
[r3-GigabitEthernet0/0/0]ip add
[r3-GigabitEthernet0/0/0]ip address 192.168.1.13 30
May 16 2021 20:10:45-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]q
[r3]interf
[r3]interface g
[r3]interface GigabitEthernet 0/0/1
[r3-GigabitEthernet0/0/1]ip add
[r3-GigabitEthernet0/0/1]ip address 192.168.1.6 30
May 16 2021 20:11:07-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]ip rout
[r3]ip route-s
[r3]ip route-static 0.0.0.0 0 192.168.1.14
[r3]ip rout
[r3]ip route-s
[r3]ip route-static 192.168.1.32 27 192.168.1.5
[r3]ip route-static 192.168.1.64 27 192.168.1.5
[r3]ip route-static 192.168.1.64 27 192.168.1.14
[r3]ip route-static 192.168.1.0 30 192.168.1.5
[r3]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]dhcp
^
Error:Incomplete command found at '^' position.
[r3]dhcp en
[r3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r3]ip poo
[r3]ip pool a
Info: It's successful to create an IP address pool.
[r3-ip-pool-a]netw
[r3-ip-pool-a]network 192.168.1.96 ma
[r3-ip-pool-a]network 192.168.1.96 mask 27
[r3-ip-pool-a]gat
[r3-ip-pool-a]gateway-list 192.168.1.92
Error:The network section should be within the subnet of the pool.
[r3-ip-pool-a]gateway-list 192.168.1.97
[r3-ip-pool-a]dns
[r3-ip-pool-a]dns-list 8.8.8.8
[r3-ip-pool-a]q
[r3]interf
[r3]interface g
[r3]interface GigabitEthernet0/0/2
[r3-GigabitEthernet0/0/2]dhcp
[r3-GigabitEthernet0/0/2]dhcp s
[r3-GigabitEthernet0/0/2]dhcp select g
[r3-GigabitEthernet0/0/2]dhcp select global
[r3-GigabitEthernet0/0/2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>
<r3>sav
<r3>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r3>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
R4
The device is running!
<Huawei>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]intrf
[r4]inter
[r4]interface l
[r4]interface LoopBack 0
[r4-LoopBack0]ip add
[r4-LoopBack0]ip address 192.168.1.129 28
[r4-LoopBack0]q
[r4]interf
[r4]interface l
[r4]interface LoopBack 1
[r4-LoopBack1]ip add
[r4-LoopBack1]ip address 192.168.1.145 28
[r4-LoopBack1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/0
[r4-GigabitEthernet0/0/0]ip add
[r4-GigabitEthernet0/0/0]ip address 192.168.1.10 30
May 16 2021 20:12:06-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/1
[r4-GigabitEthernet0/0/1]ip add
[r4-GigabitEthernet0/0/1]ip address 192.168.1.14 30
May 16 2021 20:12:32-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r4-GigabitEthernet0/0/1]q
[r4]interf
[r4]interface e
[r4]interface Eth
[r4]interface Ethernet4/0/0
[r4-Ethernet4/0/0]ip add
[r4-Ethernet4/0/0]ip address 192.168.1.17 30
[r4-Ethernet4/0/0]
May 16 2021 20:13:21-08:00 r4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface Ethernet4/0/0 has entered the UP state.
[r4-Ethernet4/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/2
[r4-GigabitEthernet0/0/2]ip add
[r4-GigabitEthernet0/0/2]ip address 192.168.1.21 30
[r4-GigabitEthernet0/0/2]
May 16 2021 20:13:46-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r4-GigabitEthernet0/0/2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ping 192.168.1.18
PING 192.168.1.18: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.18: bytes=56 Sequence=1 ttl=255 time=60 ms
Reply from 192.168.1.18: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 192.168.1.18: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 192.168.1.18: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.1.18: bytes=56 Sequence=5 ttl=255 time=20 ms
--- 192.168.1.18 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/30/60 ms
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 0.0.0.0 0 192.168.1.18
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 192.168.1.32 27 192.168.1.9
[r4]ip route-static 192.168.1.64 27 192.168.1.9
[r4]ip route-static 192.168.1.0 30 192.168.1.9
[r4]ip route-static 192.168.1.4 30 192.168.1.13
[r4]ip route-static 192.168.1.96 27 192.168.1.13
[r4]ip route-static 192.168.1.96 32 192.168.1.13
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 0.0.0.0 0 192.168.1.22 pref
[r4]ip route-static 0.0.0.0 0 192.168.1.22 preference 61
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 192.168.1.128 27 nu
[r4]ip route-static 192.168.1.128 27 NULL 0
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>a
^
Error:Ambiguous command found at '^' position.
<r4>y
^
Error: Unrecognized command found at '^' position.
<r4>sav
<r4>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r4>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
R5
The device is running!
<Huawei>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]intrf
[r4]inter
[r4]interface l
[r4]interface LoopBack 0
[r4-LoopBack0]ip add
[r4-LoopBack0]ip address 192.168.1.129 28
[r4-LoopBack0]q
[r4]interf
[r4]interface l
[r4]interface LoopBack 1
[r4-LoopBack1]ip add
[r4-LoopBack1]ip address 192.168.1.145 28
[r4-LoopBack1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/0
[r4-GigabitEthernet0/0/0]ip add
[r4-GigabitEthernet0/0/0]ip address 192.168.1.10 30
May 16 2021 20:12:06-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/1
[r4-GigabitEthernet0/0/1]ip add
[r4-GigabitEthernet0/0/1]ip address 192.168.1.14 30
May 16 2021 20:12:32-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r4-GigabitEthernet0/0/1]q
[r4]interf
[r4]interface e
[r4]interface Eth
[r4]interface Ethernet4/0/0
[r4-Ethernet4/0/0]ip add
[r4-Ethernet4/0/0]ip address 192.168.1.17 30
[r4-Ethernet4/0/0]
May 16 2021 20:13:21-08:00 r4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface Ethernet4/0/0 has entered the UP state.
[r4-Ethernet4/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/2
[r4-GigabitEthernet0/0/2]ip add
[r4-GigabitEthernet0/0/2]ip address 192.168.1.21 30
[r4-GigabitEthernet0/0/2]
May 16 2021 20:13:46-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r4-GigabitEthernet0/0/2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ping 192.168.1.18
PING 192.168.1.18: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.18: bytes=56 Sequence=1 ttl=255 time=60 ms
Reply from 192.168.1.18: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 192.168.1.18: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 192.168.1.18: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.1.18: bytes=56 Sequence=5 ttl=255 time=20 ms
--- 192.168.1.18 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/30/60 ms
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 0.0.0.0 0 192.168.1.18
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 192.168.1.32 27 192.168.1.9
[r4]ip route-static 192.168.1.64 27 192.168.1.9
[r4]ip route-static 192.168.1.0 30 192.168.1.9
[r4]ip route-static 192.168.1.4 30 192.168.1.13
[r4]ip route-static 192.168.1.96 27 192.168.1.13
[r4]ip route-static 192.168.1.96 32 192.168.1.13
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 0.0.0.0 0 192.168.1.22 pref
[r4]ip route-static 0.0.0.0 0 192.168.1.22 preference 61
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip rout
[r4]ip route-s
[r4]ip route-static 192.168.1.128 27 nu
[r4]ip route-static 192.168.1.128 27 NULL 0
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>a
^
Error:Ambiguous command found at '^' position.
<r4>y
^
Error: Unrecognized command found at '^' position.
<r4>sav
<r4>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r4>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
R6
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r6
[r6]inter
[r6]interface g
[r6]interface GigabitEthernet 0/0/0
[r6-GigabitEthernet0/0/0]ip add
[r6-GigabitEthernet0/0/0]ip address 56.1.1.2 24
May 16 2021 20:20:22-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r6-GigabitEthernet0/0/0]q
[r6]interf
[r6]interface
[r6]interface l
[r6]interface LoopBack 0
[r6-LoopBack0]ip add
[r6-LoopBack0]ip address 6.6.6.6 24
[r6-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>sys
Enter system view, return user view with Ctrl+Z.
[r6]te
[r6]tcp
[r6]tel
[r6]telnet 56.1.1.1
^
Error: Unrecognized command found at '^' position.
[r6]
[r6]q
<r6>tale
<r6>tale 56.1.1.1
^
Error: Unrecognized command found at '^' position.
<r6>telnet 56.1.1.1
Press CTRL_] to quit telnet mode
Trying 56.1.1.1 ...
Connected to 56.1.1.1 ...
Login authentication
Username:caomi
Password:
<r1>sav
<r1>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r1>
Please check whether system data has been changed, and save data in time
Configuration console time out, please retry to log on
The connection was closed by the remote host
<r6>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on