手把手教你北邮操作系统小学期实验三——ARM/ucLinux-SkyEye的安装，配置与集成3

接上一章 手把手教你北邮操作系统小学期实验三——ARM/ucLinux-SkyEye的安装，配置与集成2

编译安装skyeye

1. 安装skyeye

• 下载skyeye

skyeye-1.2.9_rc1//我试过很多版本这个能用

tar xvf skyeye-1.2.9_rc1.tar.gz

2. cd skyeye-1.2.9_rc1
   
3. ./configure//预处理
   
   4.make lib
   

5.make//遇到了问题

utils/uart_console/uart_console.c:58: 错误：expected identifier or ‘(’ before numeric constant
utils/uart_console/uart_console.c:59: 错误：expected identifier or ‘(’ before numeric constant
utils/uart_console/uart_console.c:62: 错误：expected identifier or ‘(’ before numeric constant
utils/uart_console/uart_console.c:63: 错误：expected identifier or ‘(’ before numeric constant
错误：expected identifier or ‘(’ before numeric constant
是因为在其它头文件中已将POLLRDNORM那些定义，此处是已被define
解决方法，将58到63行注释
//const uint32_t POLLRDNORM = 0x040;
//const uint32_t POLLRDBAND = 0x080;
//const uint32_t POLLPRI = 0x002;
//const uint32_t POLLOUT = 0x004;
//const uint32_t POLLWRNORM = 0x100;
//const uint32_t POLLWRBAND = 0x200; 
然后就好了;

6. make install_lib
   
7. make install
   
8. 测试HelloWorld文件

• skyeye的控制命令
  

 输入：cd /opt/skyeye/testsuite/arm_hello //先进入HelloWorld的目录
 输入：skyeye -e arm_hello  

输入：start

输入：run

输入：stop

9. 还有一种方式就是直接用 :

sudo apt-get install skyeye//这个是1.2.5

10. 安装完成直接输入skyeye
    

下一章 手把手教你北邮操作系统小学期实验三——ARM/ucLinux-SkyEye的安装，配置与集成4