Linux(linaro) with HDMI video output on the ZED, ZC702 and ZC706 boards

参考文章

• zedboard运行linaro系统
• ZYNQ学习记录之 zynq zc706 ps端sdboot运行 linaro ubuntu
  
• Linux with HDMI video output on the ZED, ZC702 and ZC706 boards

1.Preparing the SD-card

sudo apt isntall gparted
sudo gparted

2.Build the boot image

2.1 Compile u-boot

git clone https://github.com/Xilinx/u-boot-xlnx.git
git checkout xilinx-v201*.*
source /../Vivado/201*.*/setting64.sh
export CROSS_COMPILE=/../arm-linux-gnueabihf-
make ARCH=arm CROSS_COMPILE=/../arm-linux-gnueabihf-  zynq_z*_config
make ARCH=arm CROSS_COMPILE=/../arm-linux-gnueabihf-
mv u-boot u-boot.elf

2.2 Vivado

• Create Project --> Boards
• Create Block Design --> IP Catalog(ZYNQ7 Processing System) --> Run Block Automation
  
• 双击 --> Re-customize IP
• Clock Configuration --> PL Fabric Clocks --> FCLK_CLK0 --> 取消

• 双击TTC --> 取消
• …
• 右键单击 --> Regenerate Layout

• Create HDL Wrapper…
• Generate Bitstream
• File --> Export --> Export Hardware --> Include bitstream
• File -> Launch SDK
• File --> New --> Application Project

Project name: fsbl

• Next --> Templates --> Zynq FSBL --> Finish
• Project Explorer

Build Project

2.3 Generate BOOT.BIN

• Project Explorer --> Create Boot Image

FSBL
bitstream
u-boot.elf

3.Build kernel image

sudo apt install u-boot-tools
git clone https://github.com/Xilinx/linux-xlnx
git checkout xilinx-v201*.*
export CROSS_COMPILE=/../arm-linux-gnueabihf-
make ARCH=arm CROSS_COMPILE=/../arm-linux-gnueabihf- xilinx_zynq_defconfig
make ARCH=arm CROSS_COMPILE=/../arm-linux-gnueabihf-
make uImage LOADADDR=0x00008000

4.Compile devicetree

5.BOOT rootfs

sudo cp * /media/username/BOOT/
sudo tar zxvf linar*.tar.gz
sudo rsync -a --progress ./  /media/username/rootfs/