跑表精确至0.1秒

#include <reg52.h>

#define Dataport P0

sbit Latch_seg = P2^2;
sbit Latch_bit = P2^3;

unsigned char bitcode[8] = {0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};
unsigned char segcode[16] = {0x3F,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7C,0x39,0x5E,0x79,0x71};
unsigned char telcode[16] = {0x06,0x07,0x07,0x7d,0x7f,0x06,0x5b,0x66,0x06,0x7f,0x4f,0x00,0x00,0x00,0x00,0x00};

unsigned long int j,k;

void ISR_R0(void) interrupt 1
{
    TH0 = 0x8d;
    TL0 = 0xf0;
    j++;
    if(j == 100)
    {
        j = 0;
        k++;
    }
}

void delay(unsigned int i)
{
    while(--i);
}

void tel()
{
    unsigned int i;
    while(1)
    {
        Dataport = bitcode[i];
        Latch_bit = 1;
        Latch_bit = 0;
        Dataport = telcode[(i+k)%16];
        Latch_seg = 1;
        Latch_seg = 0;
        delay(200);
        i++;
        if(i == 8)
            i = 0;


    }
}