内核启动卡住了

Xshell 6 (Build 0109)
Copyright (c) 2002 NetSarang Computer, Inc. All rights reserved.

Type `help' to learn how to use Xshell prompt.
[C:\~]$ 

Connecting to COM3...
Connected.

-DDR V1.14 b1f29a2a6f typ 22/09/02-16:40:04
In
ddrconfig:0
LP4 MR14:0x4d
LPDDR4, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
tdqss: cs0 dqs0: 48ps, dqs1: -72ps, dqs2: -72ps, dqs3: -120ps, 

change to: 324MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x61

change to: 528MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 780MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 1560MHz(final freq)
PHY drv:clk:38,ca:38,DQ:30,odt:60
vrefinner:16%, vrefout:29%
dram drv:40,odt:80
vref_ca:00000068
clk skew:0x2b
cs 0:
the read training result:
DQS0:0x36, DQS1:0x2e, DQS2:0x31, DQS3:0x32, 
min  :0x10 0x11 0x13  0xe  0x2  0x5  0xb  0xa , 0x7  0x1  0x8  0x3  0x9  0x7  0xc  0x7 ,
       0x4  0x4  0x5  0x1  0x3  0x6  0x9  0xa , 0xc  0x5  0x5  0x3 0x15 0x12  0xf  0xf ,
mid  :0x27 0x28 0x2a 0x25 0x17 0x1b 0x20 0x1e ,0x19 0x18 0x1b 0x1a 0x1c 0x1d 0x20 0x1d ,
      0x19 0x1a 0x1e 0x14 0x1a 0x1d 0x1d 0x21 ,0x23 0x1c 0x1b 0x19 0x28 0x2b 0x26 0x27 ,
max  :0x3f 0x40 0x41 0x3d 0x2c 0x31 0x35 0x33 ,0x2b 0x2f 0x2f 0x31 0x30 0x33 0x34 0x34 ,
      0x2f 0x31 0x37 0x28 0x32 0x35 0x32 0x39 ,0x3a 0x33 0x31 0x2f 0x3c 0x45 0x3d 0x3f ,
range:0x2f 0x2f 0x2e 0x2f 0x2a 0x2c 0x2a 0x29 ,0x24 0x2e 0x27 0x2e 0x27 0x2c 0x28 0x2d ,
      0x2b 0x2d 0x32 0x27 0x2f 0x2f 0x29 0x2f ,0x2e 0x2e 0x2c 0x2c 0x27 0x33 0x2e 0x30 ,
the write training result:
DQS0:0x34, DQS1:0x1d, DQS2:0x1d, DQS3:0x14, 
min  :0x6a 0x6e 0x6f 0x6d 0x5c 0x60 0x67 0x68 0x67 ,0x4f 0x52 0x54 0x55 0x56 0x58 0x5a 0x58 0x55 ,
      0x4d 0x51 0x52 0x4d 0x4f 0x52 0x52 0x58 0x54 ,0x49 0x47 0x44 0x45 0x55 0x56 0x52 0x53 0x4a ,
mid  :0x86 0x88 0x8a 0x87 0x75 0x79 0x80 0x82 0x82 ,0x6a 0x6b 0x6c 0x6e 0x6e 0x70 0x72 0x71 0x6d ,
      0x68 0x6b 0x6b 0x67 0x68 0x6b 0x6a 0x71 0x6e ,0x65 0x61 0x5d 0x5f 0x6e 0x70 0x6a 0x6d 0x62 ,
max  :0xa2 0xa2 0xa6 0xa1 0x8e 0x92 0x99 0x9d 0x9e ,0x86 0x84 0x84 0x88 0x87 0x88 0x8a 0x8a 0x86 ,
      0x84 0x86 0x84 0x82 0x82 0x84 0x83 0x8a 0x88 ,0x81 0x7b 0x77 0x79 0x88 0x8a 0x82 0x88 0x7a ,
range:0x38 0x34 0x37 0x34 0x32 0x32 0x32 0x35 0x37 ,0x37 0x32 0x30 0x33 0x31 0x30 0x30 0x32 0x31 ,
      0x37 0x35 0x32 0x35 0x33 0x32 0x31 0x32 0x34 ,0x38 0x34 0x33 0x34 0x33 0x34 0x30 0x35 0x30 ,
CA Training result:
cs:0 min  :0x44 0x42 0x3e 0x38 0x3d 0x34 0x40 ,0x46 0x40 0x40 0x38 0x3b 0x35 0x40 ,
cs:0 mid  :0x83 0x82 0x7c 0x76 0x79 0x73 0x6d ,0x84 0x7f 0x7c 0x77 0x77 0x74 0x6b ,
cs:0 max  :0xc2 0xc2 0xba 0xb5 0xb5 0xb3 0x9b ,0xc2 0xbf 0xb9 0xb7 0xb4 0xb3 0x97 ,
cs:0 range:0x7e 0x80 0x7c 0x7d 0x78 0x7f 0x5b ,0x7c 0x7f 0x79 0x7f 0x79 0x7e 0x57 ,
out
U-Boot SPL board init
U-Boot SPL 2017.09-gaaca6ffec1-211203 #zzz (Dec 03 2021 - 18:42:16)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 9
spl: mmc init failed with error: -95
Trying to boot from MMC1
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(32fbfe6139...) + OK
## Checking uboot 0x00a00000 ... sha256(e3af6de0da...) + OK
## Checking fdt 0x00b38fe8 ... sha256(fcfda359c0...) + OK
## Checking atf-2 0xfdcc1000 ... sha256(9662321b37...) + OK
## Checking atf-3 0x0006a000 ... sha256(d959b30fef...) + OK
## Checking atf-4 0xfdcd0000 ... sha256(b46eaa95b8...) + OK
## Checking atf-5 0xfdcce000 ... sha256(2f8839c803...) + OK
## Checking atf-6 0x00068000 ... sha256(6e9d32ba23...) + OK
## Checking optee 0x08400000 ... sha256(af414b9c9f...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 239.241 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-389-g4613ae965:cl
NOTICE:  BL31: Built : 11:21:14, Jul  7 2022
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid 220114
INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 3.13.0-651-gd84087907 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 Fri Sep 16 15:39:33 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-dirty #liuyuan (Oct 31 2022 - 13:07:17 +0800)

Model: Rockchip RK3568 Evaluation Board
PreSerial: 2, raw, 0xfe660000
DRAM:  2 GiB
Sysmem: init
Relocation Offset: 7d23f000
Relocation fdt: 7b9f8cc0 - 7b9fecd8
CR: M/C/I
Using default environment

dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v1
boot mode: recovery (misc)
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found! Error: -2
vdd_cpu init 900000 uV
PMIC:  RK8090 (on=0x40, off=0x00)
vdd_logic init 900000 uV
vdd_gpu init 900000 uV
vdd_npu init 900000 uV
io-domain: OK
INFO:    ddr dmc_fsp already initialized in loader.
Could not find baseparameter partition
Model: Rockchip RK3568 EVB2 LP4X V10 Board
Rockchip UBOOT DRM driver version: v1.0.1
VOP have 2 active VP
vp0 have layer nr:3[1 3 5 ], primary plane: 5
vp1 have layer nr:3[0 2 4 ], primary plane: 4
vp2 have layer nr:0[], primary plane: 0
Using display timing dts
dsi@fe060000:  detailed mode clock 132000 kHz, flags[8000000a]
    H: 1080 1095 1097 1127
    V: 1920 1935 1937 1952
bus_format: 100e
VOP update mode to: 1080x1920p60, type: MIPI0 for VP1
VP1 set crtc_clock to 132000KHz
VOP VP1 enable Smart0[654x270->654x270@213x825] fmt[2] addr[0x7df04000]
final DSI-Link bandwidth: 876 Mbps x 4
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
Could not find baseparameter partition
mode:3840x2160
hdmi@fe0a0000:  detailed mode clock 594000 kHz, flags[5]
    H: 3840 4016 4104 4400
    V: 2160 2168 2178 2250
bus_format: 2025
VOP update mode to: 3840x2160p60, type: HDMI0 for VP0
VP0 set crtc_clock to 594000KHz
VOP VP0 enable Smart1[654x270->654x270@1593x945] fmt[2] addr[0x7df04000]
CEA mode used vic=97
final pixclk = 594000000 tmdsclk = 594000000
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 03 success
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 21 success
PHY powered down in 0 iterations
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 21 success
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
[dw_hdmi_i2c_write] write offset 21 success
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=594.000MHz N=10240 cts=990000
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 1416000 KHz
  dpll 780000 KHz
  gpll 1188000 KHz
  cpll 1000000 KHz
  npll 1200000 KHz
  vpll 660000 KHz
  hpll 594000 KHz
  ppll 200000 KHz
  armclk 1416000 KHz
  aclk_bus 150000 KHz
  pclk_bus 100000 KHz
  aclk_top_high 500000 KHz
  aclk_top_low 400000 KHz
  hclk_top 150000 KHz
  pclk_top 100000 KHz
  aclk_perimid 300000 KHz
  hclk_perimid 150000 KHz
  pclk_pmu 100000 KHz
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "recovery"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0x78c8c280 with size 0x02b6ba00
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at 78c8c280 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x78ca7480
     Data Size:    34888192 Bytes = 33.3 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00280000
     Entry Point:  0x00280000
     Hash algo:    sha256
     Hash value:   36373603cccdac0f5089742dcdc327633197a1fef2e544d4048eef06c74273d2
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 78c8c280 ...
   Using 'conf' configuration
   Trying 'ramdisk' ramdisk subimage
     Description:  unavailable
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x7adece80
     Data Size:    10529865 Bytes = 10 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x0a200000
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   08443c7e56e1edff32fad3c4f7c6ae18165da5a05ae1c2a902666a7313d152e6
   Verifying Hash Integrity ... sha256+ OK
   Loading ramdisk from 0x7adece80 to 0x0a200000
## Loading fdt from FIT Image at 78c8c280 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x78c8ca80
     Data Size:    108821 Bytes = 106.3 KiB
     Architecture: AArch64
     Load Address: 0x08300000
     Hash algo:    sha256
     Hash value:   77b792b9366f4401d467a7c7fc30aeda4c639cc6ca063319c7faa4c9fde52283
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x08300000 to 0x08300000
   Booting using the fdt blob at 0x08300000
   Loading Kernel Image from 0x78ca7480 to 0x00280000 ... OK
   kernel loaded at 0x00280000, end = 0x023c5a00
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831d914
vp0, plane_mask:0x2a, primary-id:5, curser-id:-1
vp1, plane_mask:0x15, primary-id:4, curser-id:-1
vp2, plane_mask:0x0, primary-id:0, curser-id:-1
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0x80000000 (size: 0x76c00000)
== DO RELOCATE == Kernel from 0x00280000 to 0x00200000
Total: 1767.927 ms

Starting kernel ...

[    1.836785] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    1.836807] Linux version 5.10.110 (liuyuan@boardcon) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Mon Oct 31 13:08:02 CST 2022
[    1.840944] Machine model: Rockchip RK3568 EVB2 LP4X V10 Board
[    1.841004] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[    1.845150] printk: bootconsole [uart8250] enabled
[    1.846546] efi: UEFI not found.
[    1.879748] Zone ranges:
[    1.879996]   DMA      [mem 0x0000000000200000-0x000000007fffffff]
[    1.880569]   DMA32    empty
[    1.880836]   Normal   empty
[    1.881102] Movable zone start for each node
[    1.881492] Early memory node ranges
[    1.881820]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    1.882395]   node   0: [mem 0x0000000009400000-0x000000007fffffff]
[    1.882971] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[    1.898654] cma: Reserved 16 MiB at 0x000000007e800000
[    1.899209] psci: probing for conduit method from DT.
[    1.899682] psci: PSCIv1.1 detected in firmware.
[    1.900107] psci: Using standard PSCI v0.2 function IDs
[    1.900589] psci: Trusted OS migration not required
[    1.901038] psci: SMC Calling Convention v1.2
[    1.901782] percpu: Embedded 30 pages/cpu s83416 r8192 d31272 u122880
[    1.902489] Detected VIPT I-cache on CPU0
[    1.902896] CPU features: detected: GIC system register CPU interface
[    1.903487] CPU features: detected: Virtualization Host Extensions
[    1.904059] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    1.904706] alternatives: patching kernel code
[    1.906968] Built 1 zonelists, mobility grouping on.  Total pages: 511496
[    1.907596] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000
[    1.910077] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.910993] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.911703] mem auto-init: stack:off, heap alloc:off, heap free:off
[    1.937275] Memory: 1975584K/2078720K available (18496K kernel code, 3158K rwdata, 5860K rodata, 6464K init, 530K bss, 86752K reserved, 16384K cma-reserved)
[    1.938670] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    1.939297] ftrace: allocating 55319 entries in 217 pages
[    2.010981] ftrace: allocated 217 pages with 5 groups
[    2.011764] rcu: Hierarchical RCU implementation.
[    2.012202] rcu: 	RCU event tracing is enabled.
[    2.012618] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    2.013216] 	Rude variant of Tasks RCU enabled.
[    2.013632] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    2.014325] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    2.019267] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    2.020961] GICv3: GIC: Using split EOI/Deactivate mode
[    2.021450] GICv3: 320 SPIs implemented
[    2.021803] GICv3: 0 Extended SPIs implemented
[    2.022245] GICv3: Distributor has no Range Selector support
[    2.022769] GICv3: 16 PPIs implemented
[    2.023151] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    2.023888] ITS [mem 0xfd440000-0xfd45ffff]
[    2.024336] ITS@0x00000000fd440000: allocated 8192 Devices @25d0000 (indirect, esz 8, psz 64K, shr 0)
[    2.025205] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @25e0000 (flat, esz 2, psz 64K, shr 0)
[    2.026137] ITS: using cache flushing for cmd queue
[    2.026837] GICv3: using LPI property table @0x00000000025f0000
[    2.027471] GIC: using cache flushing for LPI property table
[    2.027993] GICv3: CPU0: using allocated LPI pending table @0x0000000002600000
[    2.028787] random: get_random_bytes called from start_kernel+0x3e8/0x648 with crng_init=0
[    2.054300] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    2.055625] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    2.056616] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    2.058104] Console: colour dummy device 80x25
[    2.058540] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    2.059483] pid_max: default: 32768 minimum: 301
[    2.060017] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.060702] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.062644] rcu: Hierarchical SRCU implementation.
[    2.063735] Platform MSI: interrupt-controller@fd440000 domain created
[    2.064641] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[    2.065661] EFI services will not be available.
[    2.066345] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    2.067965] Detected VIPT I-cache on CPU1
[    2.067996] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    2.068015] GICv3: CPU1: using allocated LPI pending table @0x0000000002610000
[    2.068068] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    2.069319] Detected VIPT I-cache on CPU2
[    2.069344] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    2.069359] GICv3: CPU2: using allocated LPI pending table @0x0000000002620000
[    2.069396] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    2.070601] Detected VIPT I-cache on CPU3
[    2.070624] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    2.070638] GICv3: CPU3: using allocated LPI pending table @0x0000000002630000
[    2.070673] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    2.070761] smp: Brought up 1 node, 4 CPUs
[    2.077945] SMP: Total of 4 processors activated.
[    2.078378] CPU features: detected: Privileged Access Never
[    2.078888] CPU features: detected: User Access Override
[    2.079375] CPU features: detected: 32-bit EL0 Support
[    2.079862] CPU features: detected: Common not Private translations
[    2.080437] CPU features: detected: RAS Extension Support
[    2.080932] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    2.081719] CPU features: detected: CRC32 instructions
[    2.082190] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    2.082827] CPU features: detected: RCpc load-acquire (LDAPR)
[    2.083432] CPU: All CPU(s) started at EL2
[    2.084769] devtmpfs: initialized
[    2.098109] Registered cp15_barrier emulation handler
[    2.098590] Registered setend emulation handler
[    2.099149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    2.100051] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    2.101183] pinctrl core: initialized pinctrl subsystem
[    2.102203] DMI not present or invalid.
[    2.102803] NET: Registered protocol family 16
[    2.104724] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    2.105528] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    2.108182] thermal_sys: Registered thermal governor 'fair_share'
[    2.108189] thermal_sys: Registered thermal governor 'step_wise'
[    2.108775] thermal_sys: Registered thermal governor 'user_space'
[    2.109327] thermal_sys: Registered thermal governor 'power_allocator'
[    2.110105] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    2.111488] cpuidle: using governor menu
[    2.111866] Registered FIQ tty driver
[    2.112433] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    2.113163] ASID allocator initialised with 65536 entries
[    2.115581] ramoops: dmesg-0	0x20000@0x0000000000110000
[    2.116087] ramoops: console	0x80000@0x0000000000130000
[    2.116580] ramoops: pmsg	0x50000@0x00000000001b0000
[    2.117363] printk: console [ramoops-1] enabled
[    2.117780] pstore: Registered ramoops as persistent store backend
[    2.118348] ramoops: using 0xf0000@0x110000, ecc: 0
[    2.147921] rockchip-gpio fdd60000.gpio0: probed /pinctrl/gpio0@fdd60000
[    2.149030] rockchip-gpio fe740000.gpio1: probed /pinctrl/gpio1@fe740000
[    2.150077] rockchip-gpio fe750000.gpio2: probed /pinctrl/gpio2@fe750000
[    2.151173] rockchip-gpio fe760000.gpio3: probed /pinctrl/gpio3@fe760000
[    2.152184] rockchip-gpio fe770000.gpio4: probed /pinctrl/gpio4@fe770000
[    2.152868] rockchip-pinctrl pinctrl: probed pinctrl
[    2.172447] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    2.172976] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    2.173530] fiq_debugger_probe: could not install nmi irq handler
[[    2.174169] printk: console [ttyFIQ0] enabled
    2.174169] printk: console [ttyFIQ0] enabled
[    2.174957] printk: bootconsole [uart8250] disabled
[    2.174957] printk: bootconsole [uart8250] disabled
[    2.175564] Registered fiq debugger ttyFIQ0
[    2.176250] vcc3v3_sys: supplied by dc_12v
[    2.176498] vcc5v0_sys: supplied by dc_12v
[    2.176728] vcc5v0_usb: supplied by dc_12v
[    2.177133] vcc5v0_host: supplied by vcc5v0_usb
[    2.177516] vcc5v0_otg: supplied by vcc5v0_usb
[    2.178089] vcc2v5-sys: supplied by vcc3v3_sys
[    2.178319] vcc3v3_bu: supplied by vcc5v0_sys
[    2.179389] iommu: Default domain type: Translated 
[    2.179595] rk_iommu fde4b000.iommu: version = 2
[    2.180048] rk_iommu fdea0800.iommu: version = 2
[    2.180335] rk_iommu fded0480.iommu: version = 2
[    2.180641] rk_iommu fdee0800.iommu: version = 2
[    2.180919] rk_iommu fdef0800.iommu: version = 2
[    2.181166] rk_iommu fdf40f00.iommu: version = 2
[    2.181461] rk_iommu fdf80800.iommu: version = 2
[    2.181703] rk_iommu fe043e00.iommu: version = 2
[    2.182350] SCSI subsystem initialized
[    2.182567] usbcore: registered new interface driver usbfs
[    2.182608] usbcore: registered new interface driver hub
[    2.182645] usbcore: registered new device driver usb
[    2.182727] mc: Linux media interface: v0.10
[    2.182752] videodev: Linux video capture interface: v2.00
[    2.182813] pps_core: LinuxPPS API ver. 1 registered
[    2.182821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.182840] PTP clock support registered
[    2.183472] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    2.183531] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    2.185237] Advanced Linux Sound Architecture Driver Initialized.
[    2.185621] Bluetooth: Core ver 2.22
[    2.185657] NET: Registered protocol family 31
[    2.185665] Bluetooth: HCI device and connection manager initialized
[    2.185678] Bluetooth: HCI socket layer initialized
[    2.185688] Bluetooth: L2CAP socket layer initialized
[    2.185706] Bluetooth: SCO socket layer initialized
[    2.186154] rockchip-cpuinfo cpuinfo: SoC		: 35682000
[    2.186166] rockchip-cpuinfo cpuinfo: Serial		: abbf845839edac9a
[    2.186805] clocksource: Switched to clocksource arch_sys_counter
[    2.608959] NET: Registered protocol family 2
[    2.609134] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    2.610189] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    2.610269] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.610357] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    2.610545] TCP: Hash tables configured (established 16384 bind 16384)
[    2.610668] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.610702] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.610844] NET: Registered protocol family 1
[    2.611286] RPC: Registered named UNIX socket transport module.
[    2.611297] RPC: Registered udp transport module.
[    2.611303] RPC: Registered tcp transport module.
[    2.611309] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.612158] PCI: CLS 0 bytes, default 64
[    2.612662] Trying to unpack rootfs image as initramfs...
[    2.961498] Freeing initrd memory: 10280K
[    2.962358] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    2.966023] Initialise system trusted keyrings
[    2.966157] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    2.969773] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.970286] NFS: Registering the id_resolver key type
[    2.970313] Key type id_resolver registered
[    2.970320] Key type id_legacy registered
[    2.970350] ntfs: driver 2.1.32 [Flags: R/O].
[    2.970525] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    2.970779] fuse: init (API version 7.32)
[    2.971048] SGI XFS with security attributes, no debug enabled
[    3.003018] NET: Registered protocol family 38
[    3.003047] Key type asymmetric registered
[    3.003055] Asymmetric key parser 'x509' registered
[    3.003094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    3.003103] io scheduler mq-deadline registered
[    3.003111] io scheduler kyber registered
[    3.012501] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[    3.014982] rk-pcie 3c0000000.pcie: invalid prsnt-gpios property in node
[    3.015299] rk-pcie 3c0800000.pcie: invalid prsnt-gpios property in node
[    3.015695] pwm-backlight backlight: supply power not found, using dummy regulator

提示：
[    3.012501] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[    3.014982] rk-pcie 3c0000000.pcie: invalid prsnt-gpios property in node
[    3.015299] rk-pcie 3c0800000.pcie: invalid prsnt-gpios property in node
[    3.015695] pwm-backlight backlight: supply power not found, using dummy regulator

内核打印到这里就停住了，重点查看pcie

解决：
&pcie3x2 {
	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
+//	status = "okay";
+	status = "disabled";
};