DA9034驱动程序阅读笔记(6)

转载时请注明出处和作者联系方式
文章出处：http://www.limodev.cn/blog
作者联系方式：李先静 <xianjimli at hotmail dot com>

DA9034是一个集成了电源管理、音频设备、触摸屏控制器和能用A/D|D/A转换的多功能芯片。最近读了一下相关驱动程序，这里记些笔记，不成体系，作为备忘而已。有兴趣的朋友可以一起讨论。

电源驱动主要是为用户空间提供一些接口，让用户空间可以查询相应的状态，比如是否在充电，以及电池的电量等。

电源设备是一个platform device，在littleton.c中定义：

static struct platform_device micco_power_device = {
    .name       = "micco-power",
    .id     = -1,
    .dev        = {
        .platform_data = &power_pdata,
    },
};

电源驱动程序在drivers/power/micco_power.c里：

static struct platform_driver micco_power_pdrv = {
    .driver = {
        .name = "micco-power",
    },
    .probe = micco_power_probe,
    .remove = micco_power_remove,
    .suspend = micco_power_suspend,
    .resume = micco_power_resume,
};

在micco_power_probe函数里：

创建了两个timer:

    setup_timer(&charger_timer, charger_timer_func, 0);
    setup_timer(&supply_timer, supply_timer_func, 0);

charger_timer_func主要功能是更新充电状态，由于power_pdata里的回调函数都是空的，所以其实什么也没有做。

struct pda_power_pdata {
    int (*init)(struct device *dev);
    int (*is_ac_online)(void);
    int (*is_usb_online)(void);
    void (*set_charge)(int flags);
    void (*exit)(struct device *dev);
 
    char **supplied_to;
    size_t num_supplicants;
 
    unsigned int wait_for_status; /* msecs, default is 500 */
    unsigned int wait_for_charger; /* msecs, default is 500 */
    unsigned int polling_interval; /* msecs, default is 2000 */
};
 
static struct pda_power_pdata power_pdata = {
    .polling_interval = 1000,
};

supply_timer_func主要功能是更新供电状态，最终会调用函数power_supply_changed_work：
由于external_power_changed是空的，所以power_supply_changed_work只做了两件事，一是更新充电指示灯，二是上报uevent通知用户空间。

static void power_supply_changed_work(struct work_struct *work)
{
    struct power_supply *psy = container_of(work, struct power_supply,
                        changed_work);
 
    dev_dbg(psy->dev, "%s/n", __func__);
 
    class_for_each_device(power_supply_class, NULL, psy,
                  __power_supply_changed_work);
 
    power_supply_update_leds(psy);
 
    kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
}

接下来注册了几个power supply:充电器、USB和电池：

    /* register ac power supply */
    ret = power_supply_register(power_dev, &micco_psy_ac);
    if (ret) {
        dev_err(power_dev, "failed to register %s power supply/n",
            micco_psy_ac.name);
        goto ac_supply_failed;
    }
 
    /* register usb power supply */
    ret = power_supply_register(power_dev, &micco_psy_usb);
    if (ret) {
        dev_err(power_dev, "failed to register %s power supply/n",
            micco_psy_usb.name);
        goto usb_supply_failed;
    }
 
    /* register battery power supply */
    ret = power_supply_register(power_dev, &micco_bat);
    if (ret) {
        dev_err(power_dev, "failed to register %s power supply/n",
            micco_bat.name);
        goto battery_supply_failed;
    }

最后打开充设备：

ret = micco_charger_open();

现在看下充电器的supply:

只有一个“是否插上”的属性：

static enum power_supply_property micco_power_props[] = {
    POWER_SUPPLY_PROP_ONLINE,
};

可以用来给主电池和备用电池充电：

static char *micco_power_supplied_to[] = {
    "main-battery",
    "backup-battery",
};

配置信息。

static struct power_supply micco_psy_ac = {
    .name = "ac",
    .type = POWER_SUPPLY_TYPE_MAINS,
    .supplied_to = micco_power_supplied_to,
    .num_supplicants = ARRAY_SIZE(micco_power_supplied_to),
    .properties = micco_power_props,
    .num_properties = ARRAY_SIZE(micco_power_props),
    .get_property = micco_power_get_property,
};

USB的supply:其配置和充电器基本一样：
只有一个“是否插上”的属性：

static enum power_supply_property micco_power_props[] = {
    POWER_SUPPLY_PROP_ONLINE,
};

可以用来给主电池和备用电池充电：

static char *micco_power_supplied_to[] = {
    "main-battery",
    "backup-battery",
};
 
static struct power_supply micco_psy_usb = {
    .name = "usb",
    .type = POWER_SUPPLY_TYPE_USB,
    .supplied_to = micco_power_supplied_to,
    .num_supplicants = ARRAY_SIZE(micco_power_supplied_to),
    .properties = micco_power_props,
    .num_properties = ARRAY_SIZE(micco_power_props),
    .get_property = micco_power_get_property,
};

电池supply:
属性很多：

static enum power_supply_property micco_bat_props[] = {
    POWER_SUPPLY_PROP_STATUS,
    POWER_SUPPLY_PROP_PRESENT,
    POWER_SUPPLY_PROP_HEALTH,
    POWER_SUPPLY_PROP_TECHNOLOGY,
    POWER_SUPPLY_PROP_VOLTAGE_NOW,
    POWER_SUPPLY_PROP_VOLTAGE_AVG,
    POWER_SUPPLY_PROP_CURRENT_AVG,
    POWER_SUPPLY_PROP_CAPACITY,
    POWER_SUPPLY_PROP_TEMP,
    POWER_SUPPLY_PROP_TEMP_AMBIENT,
    POWER_SUPPLY_PROP_MANUFACTURER,
    POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
    POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
};
 
static struct power_supply micco_bat = {
    .name = "battery",
    .type = POWER_SUPPLY_TYPE_BATTERY,
    .properties = micco_bat_props,
    .num_properties = ARRAY_SIZE(micco_bat_props),
    .get_property = micco_bat_get_property,
    .use_for_apm = 1,
};