ESP8266:Arduino中使用硬件定时器

查了很久，网上的例子基本都是 IDF的。

经几天的查找，终于找到了在Aduino中使用硬件定时器的方法：

1.添加库：IDE菜单中选择“项目->-加载库->管理库，输入 ESP8266TimerInterrupt，安装！

2.测试代码：

/****************************************************************************************************************************
  TimerInterruptTest.ino
  For ESP8266 boards
  Written by Khoi Hoang

  Built by Khoi Hoang https://github.com/khoih-prog/ESP8266TimerInterrupt
  Licensed under MIT license

  The ESP8266 timers are badly designed, using only 23-bit counter along with maximum 256 prescaler. They're only better than UNO / Mega.
  The ESP8266 has two hardware timers, but timer0 has been used for WiFi and it's not advisable to use. Only timer1 is available.
  The timer1's 23-bit counter terribly can count only up to 8,388,607. So the timer1 maximum interval is very short.
  Using 256 prescaler, maximum timer1 interval is only 26.843542 seconds !!!

  Now with these new 16 ISR-based timers, the maximum interval is practically unlimited (limited only by unsigned long miliseconds)
  The accuracy is nearly perfect compared to software timers. The most important feature is they're ISR-based timers
  Therefore, their executions are not blocked by bad-behaving functions / tasks.
  This important feature is absolut