产品详情资料:
要配置PROFIBUS主设备和从设备的硬件类型,使用硬件库。如何处理硬件库,请参阅System 800xA Control AC 800M配置。要插入新的CI854/CI854A PROFIBUS DP-V1主单元,请按说明进行。1.右键单击要插入CI854/CI854A的控制器,然后选择“插入单元”。弹出“插入单元”对话框。2.在“已连接的库”下展开CI854的库,然后选择CI854硬件类型。3.在显示的对话框中选择硬件单元的位置。默认情况下选择***个可用位置。如果需要其他位置,请单击列表框以显示可用位置并选择所需位置。4.如果模块应设置为冗余,则检查启用冗余模式。这将释放备份单元位置的对话框。选择备份单元的位置。5.单击“插入”按钮应用当前更改
产品英文详情资料:
To configure hardware types for PROFIBUS master and slave units hardware libraries are used. How to handle hardware libraries, refer System 800xA Control AC 800M ConfigurationTo insert a new CI854/CI854A PROFIBUS DP-V1 master unit proceed as described. 1. Right-click on the controller you want to insert the CI854/CI854A and select Insert Unit. The Insert Unit dialog pops up.2. Expand the library for CI854 under Connected Libraries and select the CI854 hardware type. 3. Select a position for the hardware unit in the dialog box displayed. The first available position is chosen by default. If another position is desired, click the list box to display available positions and select the desired one. 4. If the module shall be set redundant check Enable redundant mode. This releases the dialog box for the position of the backup unit. Select a position for the backup unit. 5. Click Insert button to apply the current changes