史上最全的ASP.NET MVC路由配置

史上最全的ASP.NET MVC路由配置

2016-06-17 11:48 139人阅读 评论(0) 收藏 举报

本文章已收录于：

分类：

ASP.NET

版权声明：本文为博主原创文章，未经博主允许不得转载。

目录(?)[-]

1. URL构造
   1. 命名参数规范匿名对象
   2. 构造路由然后添加
   3. 直接方法重载匿名对象
2. 路由规则
   1.  1默认路由MVC自带
   2. 2静态URL段
   3. 3自定义常规变量URL段好吧这翻译暴露智商了
   4. 4再述默认路由
   5. 5可变长度路由
   6. 6跨命名空间路由
   7. 7正则表达式匹配路由
   8.  约束多个URL
   9. 8指定请求方法
   10. 9 WebForm支持
   11. 10MVC5的RouteAttribute
       1. 其他的还有路由前缀路由默认值
       2.  路由构造
       3.  参数限制
   12. 11最后还是不爽的话自己写个类实现 IRouteConstraint的匹配方法
   13. 12访问本地文档
   14.  13直接访问本地资源绕过了路由系统
3. 路由测试在测试项目的基础上要装moq

先说一下基本的路由规则原则。基本的路由规则是从特殊到一般排列，也就是最特殊（非主流）的规则在最前面，最一般（万金油）的规则排在最后。这是因为匹配路由规则也是照着这个顺序的。如果写反了，那么即便你路由规则写对了那照样坐等404.

XD 首先说URL的构造。 其实这个也谈不上构造，只是语法特性吧。

URL构造

命名参数规范+匿名对象

1	routes.MapRoute(name: "Default" ,url: "{controller}/{action}/{id}" , defaults: new { controller = "Home" , action = "Index" , id = UrlParameter.Optional } );

构造路由然后添加

1 2	Route myRoute = new Route( "{controller}/{action}" , new MvcRouteHandler()); routes.Add( "MyRoute" , myRoute);

直接方法重载+匿名对象

1	routes.MapRoute( "ShopSchema" , "Shop/{action}" , new { controller = "Home" });

　　个人觉得第一种比较易懂，第二种方便调试，第三种写起来比较效率吧。各取所需吧。本文行文偏向于第三种。

路由规则

 1.默认路由(MVC自带)

1 2 3 4

routes.MapRoute( "Default" , // 路由名称 "{controller}/{action}/{id}" , // 带有参数的 URL new { controller = "Home" , action = "Index" , id = UrlParameter.Optional } // 参数默认值 (UrlParameter.Optional-可选的意思) );

2.静态URL段

1 2 3 4 5

routes.MapRoute( "ShopSchema2" , "Shop/OldAction" , new { controller = "Home" , action = "Index" });    routes.MapRoute( "ShopSchema" , "Shop/{action}" , new { controller = "Home" }); routes.MapRoute( "ShopSchema2" , "Shop/OldAction.js" ,   new { controller = "Home" , action = "Index" });

 没有占位符路由就是现成的写死的。

比如这样写然后去访问http://localhost:XXX/Shop/OldAction.js，response也是完全没问题的。 controller , action , area这三个保留字就别设静态变量里面了。

3.自定义常规变量URL段（好吧这翻译暴露智商了）

1	routes.MapRoute( "MyRoute2" , "{controller}/{action}/{id}" , new { controller = "Home" , action = "Index" , id = "DefaultId" });

这种情况如果访问 /Home/Index 的话，因为第三段（id）没有值，根据路由规则这个参数会被设为DefaultId

这个用viewbag给title赋值就能很明显看出

1	ViewBag.Title = RouteData.Values[ "id" ];

图不贴了，结果是标题显示为DefaultId。 注意要在控制器里面赋值，在视图赋值没法编译的。

4.再述默认路由

然后再回到默认路由。 UrlParameter.Optional这个叫可选URL段.路由里没有这个参数的话id为null。 照原文大致说法，这个可选URL段能用来实现一个关注点的分离。刚才在路由里直接设定参数默认值其实不是很好。照我的理解，实际参数是用户发来的，我们做的只是定义形式参数名。但是，如果硬要给参数赋默认值的话，建议用语法糖写到action参数里面。比如：

1	public ActionResult Index( string id = "abcd" ){ViewBag.Title = RouteData.Values[ "id" ]; return View();}

5.可变长度路由。

1	routes.MapRoute( "MyRoute" , "{controller}/{action}/{id}/{*catchall}" , new { controller = "Home" , action = "Index" , id = UrlParameter.Optional });

在这里id和最后一段都是可变的，所以 /Home/Index/dabdafdaf 等效于 /Home/Index//abcdefdjldfiaeahfoeiho 等效于 /Home/Index/All/Delete/Perm/.....

6.跨命名空间路由

 这个提醒一下记得引用命名空间，开启IIS网站不然就是404。这个非常非主流，不建议瞎搞。

1	routes.MapRoute( "MyRoute" , "{controller}/{action}/{id}/{*catchall}" , new { controller = "Home" , action = "Index" , id = UrlParameter.Optional }, new [] { "URLsAndRoutes.AdditionalControllers" , "UrlsAndRoutes.Controllers" });

但是这样写的话数组排名不分先后的，如果有多个匹配的路由会报错。 然后作者提出了一种改进写法。

1 2 3

routes.MapRoute( "AddContollerRoute" , "Home/{action}/{id}/{*catchall}" , new { controller = "Home" , action = "Index" , id = UrlParameter.Optional }, new [] { "URLsAndRoutes.AdditionalControllers" });    routes.MapRoute( "MyRoute" , "{controller}/{action}/{id}/{*catchall}" , new { controller = "Home" , action = "Index" , id = UrlParameter.Optional }, new [] { "URLsAndRoutes.Controllers" });

 这样第一个URL段不是Home的都交给第二个处理 最后还可以设定这个路由找不到的话就不给后面的路由留后路啦，也就不再往下找啦。

1 2 3 4

Route myRoute = routes.MapRoute( "AddContollerRoute" , "Home/{action}/{id}/{*catchall}" , new { controller = "Home" , action = "Index" , id = UrlParameter.Optional }, new [] { "URLsAndRoutes.AdditionalControllers" });  myRoute.DataTokens[ "UseNamespaceFallback" ] = false ;

7.正则表达式匹配路由

1 2 3 4

routes.MapRoute( "MyRoute" , "{controller}/{action}/{id}/{*catchall}" ,   new { controller = "Home" , action = "Index" , id = UrlParameter.Optional },   new { controller = "^H.*" }, new [] { "URLsAndRoutes.Controllers" });

 约束多个URL

1 2 3 4

routes.MapRoute( "MyRoute" , "{controller}/{action}/{id}/{*catchall}" , new { controller = "Home" , action = "Index" , id = UrlParameter.Optional }, new { controller = "^H.*" , action = "^Index$|^About$" }, new [] { "URLsAndRoutes.Controllers" });

8.指定请求方法

1 2 3 4 5 6 7

routes.MapRoute( "MyRoute" , "{controller}/{action}/{id}/{*catchall}" ,    new { controller = "Home" , action = "Index" , id = UrlParameter.Optional },    new { controller = "^H.*" , action = "Index|About" , httpMethod = new HttpMethodConstraint( "GET" ) },    new [] { "URLsAndRoutes.Controllers" });

9. WebForm支持

1 2 3 4 5 6 7

routes.MapPageRoute( "" , "" , "~/Default.aspx" );      routes.MapPageRoute( "list" , "Items/{action}" , "~/Items/list.aspx" , false , new RouteValueDictionary { { "action" , "all" } });      routes.MapPageRoute( "show" , "Show/{action}" , "~/show.aspx" , false , new RouteValueDictionary { { "action" , "all" } });      routes.MapPageRoute( "edit" , "Edit/{id}" , "~/edit.aspx" , false , new RouteValueDictionary { { "id" , "1" } }, new RouteValueDictionary { { "id" , @"\d+" } });

 具体的可以看

使用Asp.Net4新特性路由创建WebForm应用

或者官方msdn

10.MVC5的RouteAttribute

首先要在路由注册方法那里

1 2	//启用路由特性映射 routes.MapMvcAttributeRoutes();

 这样

1	[Route( "Login" )]

 route特性才有效.该特性有好几个重载.还有路由约束啊,顺序啊,路由名之类的.

其他的还有路由前缀,路由默认值

1	[RoutePrefix( "reviews" )]<br>[Route( "{action=index}" )]<br> public class ReviewsController : Controller<br>{<br>}

 路由构造

1 2 3 4 5 6 7

// eg: /users/5 [Route( "users/{id:int}" ] public ActionResult GetUserById( int id) { ... }    // eg: users/ken [Route( "users/{name}" ] public ActionResult GetUserByName( string name) { ... }

 参数限制

1 2 3 4 5

// eg: /users/5 // but not /users/10000000000 because it is larger than int.MaxValue, // and not /users/0 because of the min(1) constraint. [Route( "users/{id:int:min(1)}" )] public ActionResult GetUserById( int id) { ... }

Constraint	Description	Example
alpha	Matches uppercase or lowercase Latin alphabet characters (a-z, A-Z)	{x:alpha}
bool	Matches a Boolean value.	{x:bool}
datetime	Matches a DateTime value.	{x:datetime}
decimal	Matches a decimal value.	{x:decimal}
double	Matches a 64-bit floating-point value.	{x:double}
float	Matches a 32-bit floating-point value.	{x:float}
guid	Matches a GUID value.	{x:guid}
int	Matches a 32-bit integer value.	{x:int}
length	Matches a string with the specified length or within a specified range of lengths.	{x:length(6)}  {x:length(1,20)}
long	Matches a 64-bit integer value.	{x:long}
max	Matches an integer with a maximum value.	{x:max(10)}
maxlength	Matches a string with a maximum length.	{x:maxlength(10)}
min	Matches an integer with a minimum value.	{x:min(10)}
minlength	Matches a string with a minimum length.	{x:minlength(10)}
range	Matches an integer within a range of values.	{x:range(10,50)}
regex	Matches a regular expression.	{x:regex(^\d{3}-\d{3}-\d{4}$)}

具体的可以参考

Attribute Routing in ASP.NET MVC 5

 对我来说,这样的好处是分散了路由规则的定义.有人喜欢集中,我个人比较喜欢这种灵活的处理.因为这个action定义好后,我不需要跑到配置那里定义对应的路由规则

11.最后还是不爽的话自己写个类实现 IRouteConstraint的匹配方法。

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Routing; /// <summary> /// If the standard constraints are not sufficient for your needs, you can define your own custom constraints by implementing the IRouteConstraint interface. /// </summary> public class UserAgentConstraint : IRouteConstraint {         private string requiredUserAgent;      public UserAgentConstraint( string agentParam)      {          requiredUserAgent = agentParam;      }      public bool Match(HttpContextBase httpContext, Route route, string parameterName,      RouteValueDictionary values, RouteDirection routeDirection)      {          return httpContext.Request.UserAgent != null &&          httpContext.Request.UserAgent.Contains(requiredUserAgent);      } }

1 2 3 4 5 6 7

routes.MapRoute( "ChromeRoute" , "{*catchall}" ,    new { controller = "Home" , action = "Index" },    new { customConstraint = new UserAgentConstraint( "Chrome" ) },    new [] { "UrlsAndRoutes.AdditionalControllers" });

 比如这个就用来匹配是否是用谷歌浏览器访问网页的。

12.访问本地文档

1 2 3

routes.RouteExistingFiles = true ;    routes.MapRoute( "DiskFile" , "Content/StaticContent.html" , new { controller = "Customer" , action = "List" , });

浏览网站，以开启 IIS Express，然后点显示所有应用程序-点击网站名称-配置（applicationhost.config）-搜索UrlRoutingModule节点

1	<add name= "UrlRoutingModule-4.0" type= "System.Web.Routing.UrlRoutingModule" preCondition= "managedHandler,runtimeVersionv4.0" />

把这个节点里的preCondition删除，变成

1	<add name= "UrlRoutingModule-4.0" type= "System.Web.Routing.UrlRoutingModule" preCondition= "" />

 13.直接访问本地资源，绕过了路由系统

1	routes.IgnoreRoute( "Content/{filename}.html" );

文件名还可以用 {filename}占位符。

IgnoreRoute方法是RouteCollection里面StopRoutingHandler类的一个实例。路由系统通过硬-编码识别这个Handler。如果这个规则匹配的话，后面的规则都无效了。 这也就是默认的路由里面routes.IgnoreRoute("{resource}.axd/{*pathInfo}");写最前面的原因。

路由测试（在测试项目的基础上，要装moq）

1	PM> Install-Package Moq

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97

using System; using Microsoft.VisualStudio.TestTools.UnitTesting; using System.Web; using Moq; using System.Web.Routing; using System.Reflection; [TestClass] public class RoutesTest {      private HttpContextBase CreateHttpContext( string targetUrl = null , string HttpMethod = "GET" )      {          // create the mock request          Mock<HttpRequestBase> mockRequest = new Mock<HttpRequestBase>();          mockRequest.Setup(m => m.AppRelativeCurrentExecutionFilePath)          .Returns(targetUrl);          mockRequest.Setup(m => m.HttpMethod).Returns(HttpMethod);          // create the mock response          Mock<HttpResponseBase> mockResponse = new Mock<HttpResponseBase>();          mockResponse.Setup(m => m.ApplyAppPathModifier(          It.IsAny< string >())).Returns< string >(s => s);          // create the mock context, using the request and response          Mock<HttpContextBase> mockContext = new Mock<HttpContextBase>();          mockContext.Setup(m => m.Request).Returns(mockRequest.Object);          mockContext.Setup(m => m.Response).Returns(mockResponse.Object);          // return the mocked context          return mockContext.Object;      }         private void TestRouteMatch( string url, string controller, string action, object routeProperties = null , string httpMethod = "GET" )      {          // Arrange          RouteCollection routes = new RouteCollection();          RouteConfig.RegisterRoutes(routes);          // Act - process the route          RouteData result = routes.GetRouteData(CreateHttpContext(url, httpMethod));          // Assert          Assert.IsNotNull(result);          Assert.IsTrue(TestIncomingRouteResult(result, controller, action, routeProperties));      }         private bool TestIncomingRouteResult(RouteData routeResult, string controller, string action, object propertySet = null )      {          Func< object , object , bool > valCompare = (v1, v2) =>          {              return StringComparer.InvariantCultureIgnoreCase              .Compare(v1, v2) == 0;          };          bool result = valCompare(routeResult.Values[ "controller" ], controller)          && valCompare(routeResult.Values[ "action" ], action);          if (propertySet != null )          {              PropertyInfo[] propInfo = propertySet.GetType().GetProperties();              foreach (PropertyInfo pi in propInfo)              {                  if (!(routeResult.Values.ContainsKey(pi.Name)                  && valCompare(routeResult.Values[pi.Name],                  pi.GetValue(propertySet, null ))))                  {                      result = false ;                      break ;                  }              }          }          return result;      }         private void TestRouteFail( string url)      {          // Arrange          RouteCollection routes = new RouteCollection();          RouteConfig.RegisterRoutes(routes);          // Act - process the route          RouteData result = routes.GetRouteData(CreateHttpContext(url));          // Assert          Assert.IsTrue(result == null || result.Route == null );      }         [TestMethod]      public void TestIncomingRoutes()      {          // check for the URL that we hope to receive          TestRouteMatch( "~/Admin/Index" , "Admin" , "Index" );          // check that the values are being obtained from the segments          TestRouteMatch( "~/One/Two" , "One" , "Two" );          // ensure that too many or too few segments fails to match          TestRouteFail( "~/Admin/Index/Segment" ); //失败          TestRouteFail( "~/Admin" ); //失败          TestRouteMatch( "~/" , "Home" , "Index" );          TestRouteMatch( "~/Customer" , "Customer" , "Index" );          TestRouteMatch( "~/Customer/List" , "Customer" , "List" );          TestRouteFail( "~/Customer/List/All" ); //失败          TestRouteMatch( "~/Customer/List/All" , "Customer" , "List" , new { id = "All" });          TestRouteMatch( "~/Customer/List/All/Delete" , "Customer" , "List" , new { id = "All" , catchall = "Delete" });          TestRouteMatch( "~/Customer/List/All/Delete/Perm" , "Customer" , "List" , new { id = "All" , catchall = "Delete/Perm" });      }     }

　　最后还是再推荐一下Adam Freeman写的apress.pro.asp.net.mvc.4这本书。稍微熟悉MVC的从第二部分开始读好了。前面都是入门（对我来说是扯淡）。但总比国内某些写书的人好吧——把个开源项目的源代码下载下来帖到书上面来，然后标题起个深入解析XXXX，然后净瞎扯淡。最后一千多页的巨著又诞生了。Adam Freeman的风格我就很喜欢，都是实例写作，然后还在那边书里面专门写了大量的测试。

　　哎没办法啊，技术差距就是这样了。

关注QQ公众号【黑客联盟】学习更多黑客技术!           

关注微信公众号【国际黑客联盟】掌握最新国际技术动向!

顶

0

踩

0

 

 

• 上一篇44个Javascript变态题解析
• 下一篇Jsp技术总结