在上一节的实验中,我们采用的是normal_i2c 的方式,即:要发出S信号和设备地址并得到ACK信号,才能确定存在这个设备。那么如果本身不存在这个设备当然啊不会给出应答信号,这是就不会调用i2c_probe(adapter, &addr_data, at24cxx_detect)函数中的at24cxx_detect函数。如果我们目前没有接上这个设备,但是我们今后打算把它安装上去,所以我们想要调用i2c_probe(adapter, &addr_data, at24cxx_detect)函数中的at24cxx_detect函数,那怎么办呢?这时就不能用normal_i2c方式,而应该采用forces方式。
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
static unsigned short ignore[] = { I2C_CLIENT_END };
static unsigned short normal_addr[] = { 0x50, I2C_CLIENT_END }; /* 地址值是7位 */
/* 改为0x60的话, 由于不存在设备地址为0x60的设备, 所以at24cxx_detect不被调用 */
/* 这里ANY_I2C_BUS表示在任意一条总线上查找该设备,0x60表示要发出的设备地址 */
static unsigned short force_addr[] = {ANY_I2C_BUS, 0x60, I2C_CLIENT_END};
static unsigned short * forces[] = {force_addr, NULL};
static struct i2c_client_address_data addr_data = {
.normal_i2c = ignore, /* 要发出S信号和设备地址并得到ACK信号,才能确定存在这个设备 */
.probe = ignore,
.ignore = ignore,
.forces = forces, /* 强制认为存在这个设备 */
};
static int at24cxx_detect(struct i2c_adapter *adapter, int address, int kind)
{
printk("at24cxx_detect\n");
return 0;
}
static int at24cxx_attach(struct i2c_adapter *adapter)
{
return i2c_probe(adapter, &addr_data, at24cxx_detect);
}
static int at24cxx_detach(struct i2c_client *client)
{
printk("at24cxx_detach\n");
return 0;
}
static struct i2c_driver at24cxx_driver = {
.driver = {
.name = "at24cxx",
},
.attach_adapter = at24cxx_attach,
.detach_client = at24cxx_detach,
};
static int at24cxx_init(void)
{
i2c_add_driver(&at24cxx_driver);
return 0;
}
static void at24cxx_exit(void)
{
i2c_del_driver(&at24cxx_driver);
}
module_init(at24cxx_init);
module_exit(at24cxx_exit);
MODULE_LICENSE("GPL");
在这个程序里面,即便不存在设备地址为0x60的设备,也会调用i2c_probe(adapter, &addr_data, at24cxx_detect)函数中的at24cxx_detect函数,因为这里采用的是强制的方式。具体原因等到以后在来研究,目前只是先有个轮廓!