基于树莓派温度传感器控制

材料准备：
树莓派3b、温度传感器、继电器、风扇
具体的连接如下图：

代码如下：

while GPIO.input(channel) == GPIO.LOW:  
  continue  
   
 while GPIO.input(channel) == GPIO.HIGH:  
  continue  
 while j < 40:  
  k = 0  
  while GPIO.input(channel) == GPIO.LOW:  
   continue  
    
  while GPIO.input(channel) == GPIO.HIGH:  
   k += 1  
   if k > 100:  
    break  
    
  if k < 8:  
   data.append(0)  
  else:  
   data.append(1)  
   
  j += 1  
   
 print "sensor is working."  
 print data              #输出初始数据高低电平  
   
 humidity_bit = data[0:8]        #分组  
 humidity_point_bit = data[8:16]  
 temperature_bit = data[16:24]  
 temperature_point_bit = data[24:32]  
 check_bit = data[32:40]  
   
 humidity = 0  
 humidity_point = 0  
 temperature = 0  
 tem