接收到无线数据串口打印流程

uint16 SampleApp_ProcessEvent( uint8 task_id, uint16 events )
{
  afIncomingMSGPacket_t *MSGpkt;
  (void)task_id;  // Intentionally unreferenced parameter


  if ( events & SYS_EVENT_MSG )
  {
    MSGpkt = (afIncomingMSGPacket_t *)osal_msg_receive( SampleApp_TaskID );
    while ( MSGpkt )
    {
      switch ( MSGpkt->hdr.event )
      {
        case CMD_SERIAL_MSG:  //串口收到数据后由MT_UART层传递过来的数据，用网蜂方法接收，编译时不定义MT相关内容 
         SampleApp_SerialCMD((mtOSALSerialData_t *)MSGpkt);
         break;


        // Received when a key is pressed
          case KEY_CHANGE:
          SampleApp_HandleKeys( ((keyChange_t *)MSGpkt)->state, ((keyChange_t *)MSGpkt)->keys );
          break;


        // Received when a messages is received (OTA) for this endpoint
        case AF_INCOMING_MSG_CMD://收到无线数据
          SampleApp_MessageMSGCB( MSGpkt );
          break;


        // Received whenever the device changes state in the network
        case ZDO_STATE_CHANGE:
          SampleApp_NwkState = (devStates_t)(MSGpkt->hdr.status);
          if ( (SampleApp_NwkState == DEV_ZB_COORD)
              || (SampleApp_NwkState == DEV_ROUTER)
              || (SampleApp_NwkState == DEV_END_DEVICE) )
          {
            // Start sending the periodic message in a regular interval.
            osal_start_timerEx( SampleApp_TaskID,
                              SAMPLEAPP_SEND_PERIODIC_MSG_EVT,
                              SAMPLEAPP_SEND_PERIODIC_MSG_TIMEOUT );
          }
          else
          {
            // Device is no longer in the network
          }
          break;


        default:
          break;
      }


      // Release the memory
      osal_msg_deallocate( (uint8 *)MSGpkt );


      // Next - if one is available
      MSGpkt = (afIncomingMSGPacket_t *)osal_msg_receive( SampleApp_TaskID );
    }


    // return unprocessed events
    return (events ^ SYS_EVENT_MSG);
  }


  // Send a message out - This event is generated by a timer
  //  (setup in SampleApp_Init()).
  if ( events & SAMPLEAPP_SEND_PERIODIC_MSG_EVT )
  {
    // Send the periodic message
    SampleApp_SendPeriodicMessage();


    // Setup to send message again in normal period (+ a little jitter)
    osal_start_timerEx( SampleApp_TaskID, SAMPLEAPP_SEND_PERIODIC_MSG_EVT,
        (SAMPLEAPP_SEND_PERIODIC_MSG_TIMEOUT + (osal_rand() & 0x00FF)) );


    // return unprocessed events
    return (events ^ SAMPLEAPP_SEND_PERIODIC_MSG_EVT);
  }


  // Discard unknown events
  return 0;
}




无线数据事件启动
void SampleApp_MessageMSGCB( afIncomingMSGPacket_t *pkt )
{
  uint16 flashTime;


  switch ( pkt->clusterId )
  {
    uint8 i,len;
      case SAMPLEAPP_COM_CLUSTERID:     //如果是串口透传的信息
      len=pkt->cmd.Data[0];
      for(i=0;i<len;i++)
      HalUARTWrite(0,&pkt->cmd.Data[i+1],1);//发给PC机
      HalUARTWrite(0,"\n",1);               // 回车换行
      break;
 




    case SAMPLEAPP_PERIODIC_CLUSTERID:
      
      break;


    case SAMPLEAPP_FLASH_CLUSTERID:
      flashTime = BUILD_UINT16(pkt->cmd.Data[1], pkt->cmd.Data[2] );
      HalLedBlink( HAL_LED_4, 4, 50, (flashTime / 4) );
      break;
  }
}