首先，自己安卓项目的Android.mk里增加
LOCAL_WHOLE_STATIC_LIBRARIES := wxsqlite3_static curl
include $(BUILD_SHARED_LIBRARY)
include $(LOCAL_PATH)/../../wxsqlite3-3.2.1/sqlite3/secure/Android.mk \
$(LOCAL_PATH)/../../curl-7.45.0/packages/Android/Android.mk
然后是：curl-7.45.0\packages\Android\Android.mk 改为：
# Google Android makefile for curl and libcurl
#
# This file can be used when building curl using the full Android source
# release or the NDK. Most users do not want or need to do this; please
# instead read the Android section in docs/INSTALL for alternate
# methods.
#
# Place the curl source (including this makefile) into external/curl/ in the
# Android source tree. Then build them with 'make curl' or just 'make libcurl'
# from the Android root. Tested with Android versions 1.5, 2.1-2.3
#
# Note: you must first create a curl_config.h file by running configure in the
# Android environment. The only way I've found to do this is tricky. Perform a
# normal Android build with libcurl in the source tree, providing the target
# "showcommands" to make. The build will eventually fail (because curl_config.h
# doesn't exist yet), but the compiler commands used to build curl will be
# shown. Now, from the external/curl/ directory, run curl's normal configure
# command with flags that match what Android itself uses. This will mean
# putting the compiler directory into the PATH, putting the -I, -isystem and
# -D options into CPPFLAGS, putting the -W, -m, -f, -O and -nostdlib options
# into CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the
# path to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o.
# Remember that the paths must be absolute since you will not be running
# configure from the same directory as the Android make. The normal
# cross-compiler options must also be set. Note that the -c, -o, -MD and
# similar flags must not be set.
#
# To see all the LIBS options, you'll need to do the "showcommands" trick on an
# executable that's already buildable and watch what flags Android uses to link
# it (dhcpcd is a good choice to watch). You'll also want to add -L options to
# LIBS that point to the out/.../obj/lib/ and out/.../obj/system/lib/
# directories so that additional libraries can be found and used by curl.
#
# The end result will be a configure command that looks something like this
# (the environment variable A is set to the Android root path which makes the
# command shorter):
#
# A=`realpath ../..` && \
# PATH="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/bin:$PATH" \
# ./configure --host=arm-linux CC=arm-eabi-gcc \
# CPPFLAGS="-I $A/system/core/include ..." \
# CFLAGS="-nostdlib -fno-exceptions -Wno-multichar ..." \
# LIBS="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\
# /interwork/libgcc.a ..."
#
# Finally, copy the file COPYING to NOTICE so that the curl license gets put
# into the right place (but see the note about this below).
#
# Dan Fandrich
# November 2011
LOCAL_PATH:= $(call my-dir)/../..
common_CFLAGS := -Wpointer-arith -Wwrite-strings -Wunused -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wno-long-long -Wfloat-equal -Wno-multichar -Wsign-compare -Wno-format-nonliteral -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wno-system-headers -DHAVE_CONFIG_H
#########################
# Build the libcurl library
include $(CLEAR_VARS)
include $(LOCAL_PATH)/lib/Makefile.inc
CURL_HEADERS := \
curlbuild.h \
curl.h \
curlrules.h \
curlver.h \
easy.h \
mprintf.h \
multi.h \
stdcheaders.h \
typecheck-gcc.h
LOCAL_SRC_FILES := $(addprefix lib/,$(CSOURCES))
LOCAL_C_INCLUDES += $(LOCAL_PATH)/include/
LOCAL_C_INCLUDES += $(LOCAL_PATH)/lib
LOCAL_CFLAGS += $(common_CFLAGS)
LOCAL_COPY_HEADERS_TO := libcurl/curl
LOCAL_COPY_HEADERS := $(addprefix include/curl/,$(CURL_HEADERS))
LOCAL_MODULE:= libcurl
LOCAL_MODULE_TAGS := optional
# Copy the licence to a place where Android will find it.
# Actually, this doesn't quite work because the build system searches
# for NOTICE files before it gets to this point, so it will only be seen
# on subsequent builds.
ALL_PREBUILT += $(LOCAL_PATH)/NOTICE
$(LOCAL_PATH)/NOTICE: $(LOCAL_PATH)/COPYING | $(ACP)
$(copy-file-to-target)
include $(BUILD_STATIC_LIBRARY)
#########################
# Build the curl binary
#include $(CLEAR_VARS)
#include $(LOCAL_PATH)/src/Makefile.inc
#LOCAL_SRC_FILES := $(addprefix src/,$(CURL_CFILES))
#
#LOCAL_MODULE := curl
#LOCAL_MODULE_TAGS := optional
#LOCAL_STATIC_LIBRARIES := libcurl
#LOCAL_SYSTEM_SHARED_LIBRARIES := libc
#
#LOCAL_C_INCLUDES += $(LOCAL_PATH)/include $(LOCAL_PATH)/lib
#
## This may also need to include $(CURLX_CFILES) in order to correctly link
## if libcurl is changed to be built as a dynamic library
#LOCAL_CFLAGS += $(common_CFLAGS)
#
#include $(BUILD_EXECUTABLE)
#
最后是curl-7.45.0\lib\curl_config.h
/* lib/curl_config.h. Generated from curl_config.h.in by configure. */
/* lib/curl_config.h.in. Generated from configure.ac by autoheader. */
/* Location of default ca bundle */
/* #undef CURL_CA_BUNDLE */
/* Location of default ca path */
/* #undef CURL_CA_PATH */
/* to disable cookies support */
/* #undef CURL_DISABLE_COOKIES */
/* to disable cryptographic authentication */
/* #undef CURL_DISABLE_CRYPTO_AUTH */
/* to disable DICT */
/* #undef CURL_DISABLE_DICT */
/* to disable FILE */
/* #undef CURL_DISABLE_FILE */
/* to disable FTP */
/* #undef CURL_DISABLE_FTP */
/* to disable Gopher */
/* #undef CURL_DISABLE_GOPHER */
/* to disable HTTP */
/* #undef CURL_DISABLE_HTTP */
/* to disable IMAP */
/* #undef CURL_DISABLE_IMAP */
/* to disable LDAP */
/* #undef CURL_DISABLE_LDAP */
#define CURL_DISABLE_LDAP
/* to disable LDAPS */
/* #undef CURL_DISABLE_LDAPS */
/* to disable --libcurl C code generation option */
/* #undef CURL_DISABLE_LIBCURL_OPTION */
/* to disable POP3 */
/* #undef CURL_DISABLE_POP3 */
/* to disable proxies */
/* #undef CURL_DISABLE_PROXY */
/* to disable RTSP */
/* #undef CURL_DISABLE_RTSP */
/* to disable SMB/CIFS */
/* #undef CURL_DISABLE_SMB */
/* to disable SMTP */
/* #undef CURL_DISABLE_SMTP */
/* to disable TELNET */
/* #undef CURL_DISABLE_TELNET */
/* to disable TFTP */
/* #undef CURL_DISABLE_TFTP */
/* to disable TLS-SRP authentication */
/* #undef CURL_DISABLE_TLS_SRP */
/* to disable verbose strings */
/* #undef CURL_DISABLE_VERBOSE_STRINGS */
/* Definition to make a library symbol externally visible. */
#define CURL_EXTERN_SYMBOL __attribute__ ((__visibility__ ("default")))
/* your Entropy Gathering Daemon socket pathname */
/* #undef EGD_SOCKET */
/* Define if you want to enable IPv6 support */
#define ENABLE_IPV6 1
/* Define to the type of arg 2 for gethostname. */
#define GETHOSTNAME_TYPE_ARG2 size_t
/* Define to the type qualifier of arg 1 for getnameinfo. */
#define GETNAMEINFO_QUAL_ARG1 const
/* Define to the type of arg 1 for getnameinfo. */
#define GETNAMEINFO_TYPE_ARG1 struct sockaddr *
/* Define to the type of arg 2 for getnameinfo. */
#define GETNAMEINFO_TYPE_ARG2 socklen_t
/* Define to the type of args 4 and 6 for getnameinfo. */
#define GETNAMEINFO_TYPE_ARG46 socklen_t
/* Define to the type of arg 7 for getnameinfo. */
#define GETNAMEINFO_TYPE_ARG7 int
/* Specifies the number of arguments to getservbyport_r */
/* #undef GETSERVBYPORT_R_ARGS */
/* Specifies the size of the buffer to pass to getservbyport_r */
/* #undef GETSERVBYPORT_R_BUFSIZE */
/* Define to 1 if you have the alarm function. */
#define HAVE_ALARM 1
/* Define to 1 if you have the <alloca.h> header file. */
#define HAVE_ALLOCA_H 1
/* Define to 1 if you have the <arpa/inet.h> header file. */
#define HAVE_ARPA_INET_H 1
/* Define to 1 if you have the <arpa/tftp.h> header file. */
#define HAVE_ARPA_TFTP_H 1
/* Define to 1 if you have the <assert.h> header file. */
#define HAVE_ASSERT_H 1
/* Define to 1 if you have the basename function. */
#define HAVE_BASENAME 1
/* Define to 1 if bool is an available type. */
#define HAVE_BOOL_T 1
/* Define to 1 if using BoringSSL. */
/* #undef HAVE_BORINGSSL */
/* Define to 1 if you have the clock_gettime function and monotonic timer. */
/* #undef HAVE_CLOCK_GETTIME_MONOTONIC */
/* Define to 1 if you have the closesocket function. */
/* #undef HAVE_CLOSESOCKET */
/* Define to 1 if you have the CloseSocket camel case function. */
/* #undef HAVE_CLOSESOCKET_CAMEL */
/* Define to 1 if you have the connect function. */
#define HAVE_CONNECT 1
/* Define to 1 if you have the `CRYPTO_cleanup_all_ex_data' function. */
/* #undef HAVE_CRYPTO_CLEANUP_ALL_EX_DATA */
/* Define to 1 if you have the <crypto.h> header file. */
/* #undef HAVE_CRYPTO_H */
/* Define to 1 if you have the <cyassl/error-ssl.h> header file. */
/* #undef HAVE_CYASSL_ERROR_SSL_H */
/* Define to 1 if you have the <cyassl/options.h> header file. */
/* #undef HAVE_CYASSL_OPTIONS_H */
/* Define to 1 if you have the `DES_set_odd_parity' function. */
/* #undef HAVE_DES_SET_ODD_PARITY */
/* Define to 1 if you have the <dlfcn.h> header file. */
#define HAVE_DLFCN_H 1
/* Define to 1 if you have the `ENGINE_cleanup' function. */
/* #undef HAVE_ENGINE_CLEANUP */
/* Define to 1 if you have the `ENGINE_load_builtin_engines' function. */
/* #undef HAVE_ENGINE_LOAD_BUILTIN_ENGINES */
/* Define to 1 if you have the <errno.h> header file. */
#define HAVE_ERRNO_H 1
/* Define to 1 if you have the <err.h> header file. */
#define HAVE_ERR_H 1
/* Define to 1 if you have the fcntl function. */
#define HAVE_FCNTL 1
/* Define to 1 if you have the <fcntl.h> header file. */
#define HAVE_FCNTL_H 1
/* Define to 1 if you have a working fcntl O_NONBLOCK function. */
#define HAVE_FCNTL_O_NONBLOCK 1
/* Define to 1 if you have the fdopen function. */
#define HAVE_FDOPEN 1
/* Define to 1 if you have the `fork' function. */
#define HAVE_FORK 1
/* Define to 1 if you have the freeaddrinfo function. */
#define HAVE_FREEADDRINFO 1
/* Define to 1 if you have the freeifaddrs function. */
#define HAVE_FREEIFADDRS 1
/* Define to 1 if you have the fsetxattr function. */
#define HAVE_FSETXATTR 1
/* fsetxattr() takes 5 args */
/* #undef HAVE_FSETXATTR_5 */
/* fsetxattr() takes 6 args */
//#define HAVE_FSETXATTR_6 1
/* Define to 1 if you have the ftruncate function. */
#define HAVE_FTRUNCATE 1
/* Define to 1 if you have the gai_strerror function. */
#define HAVE_GAI_STRERROR 1
/* Define to 1 if you have a working getaddrinfo function. */
#define HAVE_GETADDRINFO 1
/* Define to 1 if the getaddrinfo function is threadsafe. */
#define HAVE_GETADDRINFO_THREADSAFE 1
/* Define to 1 if you have the `geteuid' function. */
#define HAVE_GETEUID 1
/* Define to 1 if you have the gethostbyaddr function. */
#define HAVE_GETHOSTBYADDR 1
/* Define to 1 if you have the gethostbyaddr_r function. */
/* #undef HAVE_GETHOSTBYADDR_R */
/* gethostbyaddr_r() takes 5 args */
/* #undef HAVE_GETHOSTBYADDR_R_5 */
/* gethostbyaddr_r() takes 7 args */
/* #undef HAVE_GETHOSTBYADDR_R_7 */
/* gethostbyaddr_r() takes 8 args */
/* #undef HAVE_GETHOSTBYADDR_R_8 */
/* Define to 1 if you have the gethostbyname function. */
#define HAVE_GETHOSTBYNAME 1
/* Define to 1 if you have the gethostbyname_r function. */
/* #undef HAVE_GETHOSTBYNAME_R */
/* gethostbyname_r() takes 3 args */
/* #undef HAVE_GETHOSTBYNAME_R_3 */
/* gethostbyname_r() takes 5 args */
/* #undef HAVE_GETHOSTBYNAME_R_5 */
/* gethostbyname_r() takes 6 args */
/* #undef HAVE_GETHOSTBYNAME_R_6 */
/* Define to 1 if you have the gethostname function. */
#define HAVE_GETHOSTNAME 1
/* Define to 1 if you have a working getifaddrs function. */
//#define HAVE_GETIFADDRS 1
/* Define to 1 if you have the getnameinfo function. */
#define HAVE_GETNAMEINFO 1
/* Define to 1 if you have the `getpass_r' function. */
/* #undef HAVE_GETPASS_R */
/* Define to 1 if you have the `getppid' function. */
#define HAVE_GETPPID 1
/* Define to 1 if you have the `getprotobyname' function. */
#define HAVE_GETPROTOBYNAME 1
/* Define to 1 if you have the `getpwuid' function. */
#define HAVE_GETPWUID 1
/* Define to 1 if you have the `getpwuid_r' function. */
#define HAVE_GETPWUID_R 1
/* Define to 1 if you have the `getrlimit' function. */
#define HAVE_GETRLIMIT 1
/* Define to 1 if you have the getservbyport_r function. */
/* #undef HAVE_GETSERVBYPORT_R */
/* Define to 1 if you have the `gettimeofday' function. */
#define HAVE_GETTIMEOFDAY 1
/* Define to 1 if you have a working glibc-style strerror_r function. */
/* #undef HAVE_GLIBC_STRERROR_R */
/* Define to 1 if you have a working gmtime_r function. */
#define HAVE_GMTIME_R 1
/* Define to 1 if you have the `gnutls_certificate_set_x509_key_file2'
function. */
/* #undef HAVE_GNUTLS_CERTIFICATE_SET_X509_KEY_FILE2 */
/* if you have the function gnutls_srp_verifier */
/* #undef HAVE_GNUTLS_SRP */
/* if you have GSS-API libraries */
/* #undef HAVE_GSSAPI */
/* Define to 1 if you have the <gssapi/gssapi_generic.h> header file. */
/* #undef HAVE_GSSAPI_GSSAPI_GENERIC_H */
/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
/* #undef HAVE_GSSAPI_GSSAPI_H */
/* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. */
/* #undef HAVE_GSSAPI_GSSAPI_KRB5_H */
/* if you have GNU GSS */
/* #undef HAVE_GSSGNU */
/* if you have Heimdal */
/* #undef HAVE_GSSHEIMDAL */
/* if you have MIT Kerberos */
/* #undef HAVE_GSSMIT */
/* Define to 1 if you have the `idna_strerror' function. */
/* #undef HAVE_IDNA_STRERROR */
/* Define to 1 if you have the `idn_free' function. */
/* #undef HAVE_IDN_FREE */
/* Define to 1 if you have the <idn-free.h> header file. */
/* #undef HAVE_IDN_FREE_H */
/* Define to 1 if you have the <ifaddrs.h> header file. */
//#define HAVE_IFADDRS_H 1
/* Define to 1 if you have the `if_nametoindex' function. */
#define HAVE_IF_NAMETOINDEX 1
/* Define to 1 if you have the `inet_addr' function. */
#define HAVE_INET_ADDR 1
/* Define to 1 if you have the inet_ntoa_r function. */
/* #undef HAVE_INET_NTOA_R */
/* inet_ntoa_r() takes 2 args */
/* #undef HAVE_INET_NTOA_R_2 */
/* inet_ntoa_r() takes 3 args */
/* #undef HAVE_INET_NTOA_R_3 */
/* Define to 1 if you have a IPv6 capable working inet_ntop function. */
#define HAVE_INET_NTOP 1
/* Define to 1 if you have a IPv6 capable working inet_pton function. */
#define HAVE_INET_PTON 1
/* Define to 1 if you have the <inttypes.h> header file. */
#define HAVE_INTTYPES_H 1
/* Define to 1 if you have the ioctl function. */
#define HAVE_IOCTL 1
/* Define to 1 if you have the ioctlsocket function. */
/* #undef HAVE_IOCTLSOCKET */
/* Define to 1 if you have the IoctlSocket camel case function. */
/* #undef HAVE_IOCTLSOCKET_CAMEL */
/* Define to 1 if you have a working IoctlSocket camel case FIONBIO function.
*/
/* #undef HAVE_IOCTLSOCKET_CAMEL_FIONBIO */
/* Define to 1 if you have a working ioctlsocket FIONBIO function. */
/* #undef HAVE_IOCTLSOCKET_FIONBIO */
/* Define to 1 if you have a working ioctl FIONBIO function. */
#define HAVE_IOCTL_FIONBIO 1
/* Define to 1 if you have a working ioctl SIOCGIFADDR function. */
#define HAVE_IOCTL_SIOCGIFADDR 1
/* Define to 1 if you have the <io.h> header file. */
/* #undef HAVE_IO_H */
/* Define to 1 if you have the lber.h header file. */
//#define HAVE_LBER_H 1
/* Define to 1 if you have the ldapssl.h header file. */
/* #undef HAVE_LDAPSSL_H */
/* Define to 1 if you have the ldap.h header file. */
#define HAVE_LDAP_H 1
/* Define to 1 if you have the `ldap_init_fd' function. */
/* #undef HAVE_LDAP_INIT_FD */
/* Use LDAPS implementation */
#define HAVE_LDAP_SSL 1
/* Define to 1 if you have the ldap_ssl.h header file. */
/* #undef HAVE_LDAP_SSL_H */
/* Define to 1 if you have the `ldap_url_parse' function. */
#define HAVE_LDAP_URL_PARSE 1
/* Define to 1 if you have the <libgen.h> header file. */
#define HAVE_LIBGEN_H 1
/* Define to 1 if you have the `idn' library (-lidn). */
/* #undef HAVE_LIBIDN */
/* Define to 1 if you have the `resolve' library (-lresolve). */
/* #undef HAVE_LIBRESOLVE */
/* Define to 1 if using libressl. */
/* #undef HAVE_LIBRESSL */
/* Define to 1 if you have the <librtmp/rtmp.h> header file. */
/* #undef HAVE_LIBRTMP_RTMP_H */
/* Define to 1 if you have the `ssh2' library (-lssh2). */
/* #undef HAVE_LIBSSH2 */
/* Define to 1 if you have the <libssh2.h> header file. */
/* #undef HAVE_LIBSSH2_H */
/* Define to 1 if you have the `ssl' library (-lssl). */
#define HAVE_LIBSSL 1
/* if zlib is available */
//#define HAVE_LIBZ 1
/* Define to 1 if you have the <limits.h> header file. */
#define HAVE_LIMITS_H 1
/* if your compiler supports LL */
#define HAVE_LL 1
/* Define to 1 if you have the <locale.h> header file. */
#define HAVE_LOCALE_H 1
/* Define to 1 if you have a working localtime_r function. */
#define HAVE_LOCALTIME_R 1
/* Define to 1 if the compiler supports the 'long long' data type. */
#define HAVE_LONGLONG 1
/* Define to 1 if you have the malloc.h header file. */
/* #undef HAVE_MALLOC_H */
/* Define to 1 if you have the memory.h header file. */
#define HAVE_MEMORY_H 1
/* Define to 1 if you have the memrchr function or macro. */
/* #undef HAVE_MEMRCHR */
/* Define to 1 if you have the MSG_NOSIGNAL flag. */
/* #undef HAVE_MSG_NOSIGNAL */
/* Define to 1 if you have the <netdb.h> header file. */
#define HAVE_NETDB_H 1
/* Define to 1 if you have the <netinet/in.h> header file. */
#define HAVE_NETINET_IN_H 1
/* Define to 1 if you have the <netinet/tcp.h> header file. */
#define HAVE_NETINET_TCP_H 1
/* Define to 1 if you have the <net/if.h> header file. */
#define HAVE_NET_IF_H 1
/* Define to 1 if you have the <nghttp2/nghttp2.h> header file. */
/* #undef HAVE_NGHTTP2_NGHTTP2_H */
/* Define to 1 if NI_WITHSCOPEID exists and works. */
/* #undef HAVE_NI_WITHSCOPEID */
/* if you have an old MIT Kerberos version, lacking GSS_C_NT_HOSTBASED_SERVICE
*/
/* #undef HAVE_OLD_GSSMIT */
/* Define to 1 if you have the <openssl/crypto.h> header file. */
/* #undef HAVE_OPENSSL_CRYPTO_H */
/* Define to 1 if you have the <openssl/engine.h> header file. */
/* #undef HAVE_OPENSSL_ENGINE_H */
/* Define to 1 if you have the <openssl/err.h> header file. */
/* #undef HAVE_OPENSSL_ERR_H */
/* Define to 1 if you have the <openssl/pem.h> header file. */
/* #undef HAVE_OPENSSL_PEM_H */
/* Define to 1 if you have the <openssl/pkcs12.h> header file. */
/* #undef HAVE_OPENSSL_PKCS12_H */
/* Define to 1 if you have the <openssl/rsa.h> header file. */
/* #undef HAVE_OPENSSL_RSA_H */
/* if you have the function SRP_Calc_client_key */
/* #undef HAVE_OPENSSL_SRP */
/* Define to 1 if you have the <openssl/ssl.h> header file. */
/* #undef HAVE_OPENSSL_SSL_H */
/* Define to 1 if you have the <openssl/x509.h> header file. */
/* #undef HAVE_OPENSSL_X509_H */
/* Define to 1 if you have the <pem.h> header file. */
/* #undef HAVE_PEM_H */
/* Define to 1 if you have the `perror' function. */
#define HAVE_PERROR 1
/* Define to 1 if you have the `pipe' function. */
#define HAVE_PIPE 1
/* Define to 1 if you have a working poll function. */
#define HAVE_POLL 1
/* If you have a fine poll */
#define HAVE_POLL_FINE 1
/* Define to 1 if you have the <poll.h> header file. */
#define HAVE_POLL_H 1
/* Define to 1 if you have a working POSIX-style strerror_r function. */
#define HAVE_POSIX_STRERROR_R 1
/* if you have <pthread.h> */
/* #undef HAVE_PTHREAD_H */
/* Define to 1 if you have the <pwd.h> header file. */
#define HAVE_PWD_H 1
/* Define to 1 if you have the `RAND_egd' function. */
/* #undef HAVE_RAND_EGD */
/* Define to 1 if you have the `RAND_screen' function. */
/* #undef HAVE_RAND_SCREEN */
/* Define to 1 if you have the `RAND_status' function. */
/* #undef HAVE_RAND_STATUS */
/* Define to 1 if you have the recv function. */
#define HAVE_RECV 1
/* Define to 1 if you have the <rsa.h> header file. */
/* #undef HAVE_RSA_H */
/* Define to 1 if you have the select function. */
#define HAVE_SELECT 1
/* Define to 1 if you have the send function. */
#define HAVE_SEND 1
/* Define to 1 if you have the <setjmp.h> header file. */
#define HAVE_SETJMP_H 1
/* Define to 1 if you have the `setlocale' function. */
#define HAVE_SETLOCALE 1
/* Define to 1 if you have the `setmode' function. */
#define HAVE_SETMODE 1
/* Define to 1 if you have the `setrlimit' function. */
#define HAVE_SETRLIMIT 1
/* Define to 1 if you have the setsockopt function. */
#define HAVE_SETSOCKOPT 1
/* Define to 1 if you have a working setsockopt SO_NONBLOCK function. */
/* #undef HAVE_SETSOCKOPT_SO_NONBLOCK */
/* Define to 1 if you have the <sgtty.h> header file. */
#define HAVE_SGTTY_H 1
/* Define to 1 if you have the sigaction function. */
#define HAVE_SIGACTION 1
/* Define to 1 if you have the siginterrupt function. */
#define HAVE_SIGINTERRUPT 1
/* Define to 1 if you have the signal function. */
#define HAVE_SIGNAL 1
/* Define to 1 if you have the <signal.h> header file. */
#define HAVE_SIGNAL_H 1
/* Define to 1 if you have the sigsetjmp function or macro. */
#define HAVE_SIGSETJMP 1
/* Define to 1 if sig_atomic_t is an available typedef. */
#define HAVE_SIG_ATOMIC_T 1
/* Define to 1 if sig_atomic_t is already defined as volatile. */
/* #undef HAVE_SIG_ATOMIC_T_VOLATILE */
/* Define to 1 if struct sockaddr_in6 has the sin6_scope_id member */
//#define HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID 1
/* Define to 1 if you have the socket function. */
#define HAVE_SOCKET 1
/* Define to 1 if you have the socketpair function. */
#define HAVE_SOCKETPAIR 1
/* Define to 1 if you have the <socket.h> header file. */
/* #undef HAVE_SOCKET_H */
/* Define to 1 if you have the `SSLv2_client_method' function. */
/* #undef HAVE_SSLV2_CLIENT_METHOD */
/* Define to 1 if you have the `SSL_get_shutdown' function. */
/* #undef HAVE_SSL_GET_SHUTDOWN */
/* Define to 1 if you have the <ssl.h> header file. */
/* #undef HAVE_SSL_H */
/* Define to 1 if you have the <stdbool.h> header file. */
#define HAVE_STDBOOL_H 1
/* Define to 1 if you have the <stdint.h> header file. */
#define HAVE_STDINT_H 1
/* Define to 1 if you have the <stdio.h> header file. */
#define HAVE_STDIO_H 1
/* Define to 1 if you have the <stdlib.h> header file. */
#define HAVE_STDLIB_H 1
/* Define to 1 if you have the strcasecmp function. */
#define HAVE_STRCASECMP 1
/* Define to 1 if you have the strcmpi function. */
/* #undef HAVE_STRCMPI */
/* Define to 1 if you have the strdup function. */
#define HAVE_STRDUP 1
/* Define to 1 if you have the strerror_r function. */
#define HAVE_STRERROR_R 1
/* Define to 1 if you have the stricmp function. */
/* #undef HAVE_STRICMP */
/* Define to 1 if you have the <strings.h> header file. */
#define HAVE_STRINGS_H 1
/* Define to 1 if you have the <string.h> header file. */
#define HAVE_STRING_H 1
/* Define to 1 if you have the strncasecmp function. */
#define HAVE_STRNCASECMP 1
/* Define to 1 if you have the strncmpi function. */
/* #undef HAVE_STRNCMPI */
/* Define to 1 if you have the strnicmp function. */
/* #undef HAVE_STRNICMP */
/* Define to 1 if you have the <stropts.h> header file. */
/* #undef HAVE_STROPTS_H */
/* Define to 1 if you have the strstr function. */
#define HAVE_STRSTR 1
/* Define to 1 if you have the strtok_r function. */
#define HAVE_STRTOK_R 1
/* Define to 1 if you have the strtoll function. */
#define HAVE_STRTOLL 1
/* if struct sockaddr_storage is defined */
#define HAVE_STRUCT_SOCKADDR_STORAGE 1
/* Define to 1 if you have the timeval struct. */
#define HAVE_STRUCT_TIMEVAL 1
/* Define to 1 if you have the <sys/filio.h> header file. */
#define HAVE_SYS_FILIO_H 1
/* Define to 1 if you have the <sys/ioctl.h> header file. */
#define HAVE_SYS_IOCTL_H 1
/* Define to 1 if you have the <sys/param.h> header file. */
#define HAVE_SYS_PARAM_H 1
/* Define to 1 if you have the <sys/poll.h> header file. */
#define HAVE_SYS_POLL_H 1
/* Define to 1 if you have the <sys/resource.h> header file. */
#define HAVE_SYS_RESOURCE_H 1
/* Define to 1 if you have the <sys/select.h> header file. */
#define HAVE_SYS_SELECT_H 1
/* Define to 1 if you have the <sys/socket.h> header file. */
#define HAVE_SYS_SOCKET_H 1
/* Define to 1 if you have the <sys/sockio.h> header file. */
//#define HAVE_SYS_SOCKIO_H 1
/* Define to 1 if you have the <sys/stat.h> header file. */
#define HAVE_SYS_STAT_H 1
/* Define to 1 if you have the <sys/time.h> header file. */
#define HAVE_SYS_TIME_H 1
/* Define to 1 if you have the <sys/types.h> header file. */
#define HAVE_SYS_TYPES_H 1
/* Define to 1 if you have the <sys/uio.h> header file. */
#define HAVE_SYS_UIO_H 1
/* Define to 1 if you have the <sys/un.h> header file. */
#define HAVE_SYS_UN_H 1
/* Define to 1 if you have the <sys/utime.h> header file. */
/* #undef HAVE_SYS_UTIME_H */
/* Define to 1 if you have the <sys/wait.h> header file. */
#define HAVE_SYS_WAIT_H 1
/* Define to 1 if you have the <sys/xattr.h> header file. */
#define HAVE_SYS_XATTR_H 1
/* Define to 1 if you have the <termios.h> header file. */
#define HAVE_TERMIOS_H 1
/* Define to 1 if you have the <termio.h> header file. */
/* #undef HAVE_TERMIO_H */
/* Define to 1 if you have the <time.h> header file. */
#define HAVE_TIME_H 1
/* Define to 1 if you have the <tld.h> header file. */
/* #undef HAVE_TLD_H */
/* Define to 1 if you have the `tld_strerror' function. */
/* #undef HAVE_TLD_STRERROR */
/* Define to 1 if you have the `uname' function. */
#define HAVE_UNAME 1
/* Define to 1 if you have the <unistd.h> header file. */
#define HAVE_UNISTD_H 1
/* Define to 1 if you have the `utime' function. */
#define HAVE_UTIME 1
/* Define to 1 if you have the <utime.h> header file. */
#define HAVE_UTIME_H 1
/* Define to 1 if compiler supports C99 variadic macro style. */
#define HAVE_VARIADIC_MACROS_C99 1
/* Define to 1 if compiler supports old gcc variadic macro style. */
#define HAVE_VARIADIC_MACROS_GCC 1
/* Define to 1 if you have the winber.h header file. */
/* #undef HAVE_WINBER_H */
/* Define to 1 if you have the windows.h header file. */
/* #undef HAVE_WINDOWS_H */
/* Define to 1 if you have the winldap.h header file. */
/* #undef HAVE_WINLDAP_H */
/* Define to 1 if you have the winsock2.h header file. */
/* #undef HAVE_WINSOCK2_H */
/* Define to 1 if you have the winsock.h header file. */
/* #undef HAVE_WINSOCK_H */
/* Define this symbol if your OS supports changing the contents of argv */
#define HAVE_WRITABLE_ARGV 1
/* Define to 1 if you have the writev function. */
#define HAVE_WRITEV 1
/* Define to 1 if you have the ws2tcpip.h header file. */
/* #undef HAVE_WS2TCPIP_H */
/* Define to 1 if you have the <x509.h> header file. */
/* #undef HAVE_X509_H */
/* if you have the zlib.h header file */
#define HAVE_ZLIB_H 1
/* Define to the sub-directory in which libtool stores uninstalled libraries.
*/
#define LT_OBJDIR ".libs/"
/* Define to 1 if you need the lber.h header file even with ldap.h */
/* #undef NEED_LBER_H */
/* Define to 1 if you need the malloc.h header file even with stdlib.h */
/* #undef NEED_MALLOC_H */
/* Define to 1 if you need the memory.h header file even with stdlib.h */
/* #undef NEED_MEMORY_H */
/* Define to 1 if _REENTRANT preprocessor symbol must be defined. */
/* #undef NEED_REENTRANT */
/* Define to 1 if _THREAD_SAFE preprocessor symbol must be defined. */
/* #undef NEED_THREAD_SAFE */
/* Define to enable NTLM delegation to winbind's ntlm_auth helper. */
/* #undef NTLM_WB_ENABLED */
/* Define absolute filename for winbind's ntlm_auth helper. */
/* #undef NTLM_WB_FILE */
/* cpu-machine-OS */
#define OS "x86_64-apple-darwin14.5.0"
/* Name of package */
#define PACKAGE "curl"
/* Define to the address where bug reports for this package should be sent. */
#define PACKAGE_BUGREPORT "a suitable curl mailing list: http://curl.haxx.se/mail/"
/* Define to the full name of this package. */
#define PACKAGE_NAME "curl"
/* Define to the full name and version of this package. */
#define PACKAGE_STRING "curl -"
/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "curl"
/* Define to the home page for this package. */
#define PACKAGE_URL ""
/* Define to the version of this package. */
#define PACKAGE_VERSION "-"
/* a suitable file to read random data from */
/* #undef RANDOM_FILE */
/* Define to the type of arg 1 for recv. */
#define RECV_TYPE_ARG1 int
/* Define to the type of arg 2 for recv. */
#define RECV_TYPE_ARG2 void *
/* Define to the type of arg 3 for recv. */
#define RECV_TYPE_ARG3 size_t
/* Define to the type of arg 4 for recv. */
#define RECV_TYPE_ARG4 int
/* Define to the function return type for recv. */
#define RECV_TYPE_RETV ssize_t
/* Define as the return type of signal handlers (`int' or `void'). */
#define RETSIGTYPE void
/* Define to the type qualifier of arg 5 for select. */
#define SELECT_QUAL_ARG5
/* Define to the type of arg 1 for select. */
#define SELECT_TYPE_ARG1 int
/* Define to the type of args 2, 3 and 4 for select. */
#define SELECT_TYPE_ARG234 fd_set *
/* Define to the type of arg 5 for select. */
#define SELECT_TYPE_ARG5 struct timeval *
/* Define to the function return type for select. */
#define SELECT_TYPE_RETV int
/* Define to the type qualifier of arg 2 for send. */
#define SEND_QUAL_ARG2 const
/* Define to the type of arg 1 for send. */
#define SEND_TYPE_ARG1 int
/* Define to the type of arg 2 for send. */
#define SEND_TYPE_ARG2 void *
/* Define to the type of arg 3 for send. */
#define SEND_TYPE_ARG3 size_t
/* Define to the type of arg 4 for send. */
#define SEND_TYPE_ARG4 int
/* Define to the function return type for send. */
#define SEND_TYPE_RETV ssize_t
/* The size of `int', as computed by sizeof. */
#define SIZEOF_INT 4
/* The size of `long', as computed by sizeof. */
#define SIZEOF_LONG 8
/* The size of `long long', as computed by sizeof. */
/* #undef SIZEOF_LONG_LONG */
/* The size of `off_t', as computed by sizeof. */
#define SIZEOF_OFF_T 8
/* The size of `short', as computed by sizeof. */
#define SIZEOF_SHORT 2
/* The size of `size_t', as computed by sizeof. */
#define SIZEOF_SIZE_T 8
/* The size of `time_t', as computed by sizeof. */
#define SIZEOF_TIME_T 8
/* The size of `void*', as computed by sizeof. */
#define SIZEOF_VOIDP 8
/* Define to 1 if you have the ANSI C header files. */
#define STDC_HEADERS 1
/* Define to the type of arg 3 for strerror_r. */
#define STRERROR_R_TYPE_ARG3 size_t
/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
#define TIME_WITH_SYS_TIME 1
/* Define to enable c-ares support */
/* #undef USE_ARES */
/* if axTLS is enabled */
/* #undef USE_AXTLS */
/* if CyaSSL is enabled */
/* #undef USE_CYASSL */
/* to enable iOS/Mac OS X native SSL/TLS support */
/* #undef USE_DARWINSSL */
/* if GnuTLS is enabled */
/* #undef USE_GNUTLS */
/* if GnuTLS uses nettle as crypto backend */
/* #undef USE_GNUTLS_NETTLE */
/* if librtmp is in use */
/* #undef USE_LIBRTMP */
/* if libSSH2 is in use */
/* #undef USE_LIBSSH2 */
/* If you want to build curl with the built-in manual */
#define USE_MANUAL 1
/* Define to enable metalink support */
/* #undef USE_METALINK */
/* if nghttp2 is in use */
/* #undef USE_NGHTTP2 */
/* if NSS is enabled */
/* #undef USE_NSS */
/* Use OpenLDAP-specific code */
/* #undef USE_OPENLDAP */
/* if OpenSSL is in use */
/* #undef USE_OPENSSL */
/* if PolarSSL is enabled */
/* #undef USE_POLARSSL */
/* to enable Windows native SSL/TLS support */
/* #undef USE_SCHANNEL */
/* if you want POSIX threaded DNS lookup */
/* #undef USE_THREADS_POSIX */
/* Use TLS-SRP authentication */
/* #undef USE_TLS_SRP */
/* Use Unix domain sockets */
#define USE_UNIX_SOCKETS 1
/* Define to 1 if you have the `normaliz' (WinIDN) library (-lnormaliz). */
/* #undef USE_WIN32_IDN */
/* Define to 1 if you are building a Windows target with large file support.
*/
/* #undef USE_WIN32_LARGE_FILES */
/* Use Windows LDAP implementation */
#undef USE_WIN32_LDAP
/* Define to 1 if you are building a Windows target without large file
support. */
/* #undef USE_WIN32_SMALL_FILES */
/* to enable SSPI support */
/* #undef USE_WINDOWS_SSPI */
/* Version number of package */
#define VERSION "-"
/* Define to 1 to provide own prototypes. */
/* #undef WANT_IDN_PROTOTYPES */
/* Define to avoid automatic inclusion of winsock.h */
/* #undef WIN32_LEAN_AND_MEAN */
/* Define to 1 if OS is AIX. */
#ifndef _ALL_SOURCE
/* # undef _ALL_SOURCE */
#endif
/* Enable large inode numbers on Mac OS X 10.5. */
#ifndef _DARWIN_USE_64_BIT_INODE
# define _DARWIN_USE_64_BIT_INODE 1
#endif
/* Number of bits in a file offset, on hosts where this is settable. */
/* #undef _FILE_OFFSET_BITS */
/* Define for large files, on AIX-style hosts. */
/* #undef _LARGE_FILES */
/* Define to empty if `const' does not conform to ANSI C. */
/* #undef const */
/* Type to use in place of in_addr_t when system does not provide it. */
/* #undef in_addr_t */
/* Define to `__inline__' or `__inline' if that's what the C compiler
calls it, or to nothing if 'inline' is not supported under any name. */
#ifndef __cplusplus
/* #undef inline */
#endif
/* Define to `unsigned int' if <sys/types.h> does not define. */
/* #undef size_t */
/* the signed version of size_t */
/* #undef ssize_t */
扫一扫
8311
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
