reactos操作系统实现(75)

在引导系统后，会有一些驱动程序是由引导参数指定的，下面这个函数，就是处理引导时加载到内存里的驱动程序，实现的代码如下：

#001  VOID

#002  FASTCALL

#003  IopInitializeBootDrivers(VOID)

#004  {

#005      PLIST_ENTRY ListHead, NextEntry;

#006      PLDR_DATA_TABLE_ENTRY LdrEntry;

#007      PDEVICE_NODE DeviceNode;

#008      PDRIVER_OBJECT DriverObject;

#009      LDR_DATA_TABLE_ENTRY ModuleObject;

#010      NTSTATUS Status;

#011      UNICODE_STRING DriverName;

#012 

#013      DPRINT("IopInitializeBootDrivers()/n");

#014 

 

为根设备节点IopRootDeviceNode创建一个设备节点。

#015      /* Use IopRootDeviceNode for now */

#016      Status = IopCreateDeviceNode(IopRootDeviceNode, NULL, NULL, &DeviceNode);

#017      if (!NT_SUCCESS(Status)) return;

#018 

 

设置最基本的文件系统驱动程序。

#019      /* Setup the module object for the RAW FS Driver */

#020      ModuleObject.DllBase = NULL;

#021      ModuleObject.SizeOfImage = 0;

#022      ModuleObject.EntryPoint = RawFsDriverEntry;

#023      RtlInitUnicodeString(&DriverName, L"RAW");

#024 

 

初始化这个驱动程序模块。

#025      /* Initialize it */

#026      Status = IopInitializeDriverModule(DeviceNode,

#027                                         &ModuleObject,

#028                                         &DriverName,

#029                                         TRUE,

#030                                         &DriverObject);

#031      if (!NT_SUCCESS(Status))

#032      {

#033          /* Fail */

#034          IopFreeDeviceNode(DeviceNode);

#035          return;

#036      }

#037 

 

关联设备驱动程序到设备节点。

#038      /* Now initialize the associated device */

#039      Status = IopInitializeDevice(DeviceNode, DriverObject);

#040      if (!NT_SUCCESS(Status))

#041      {

#042          /* Fail */

#043          IopFreeDeviceNode(DeviceNode);

#044          return;

#045      }

#046 

 

开始启动这个设备，通过IRP包来通知系统，然后分配设备所需要的资源。

#047      /* Start it up */

#048      Status = IopStartDevice(DeviceNode);

#049      if (!NT_SUCCESS(Status))

#050      {

#051          /* Fail */

#052          IopFreeDeviceNode(DeviceNode);

#053          return;

#054      }

#055 

 

循环地加载引导时指定的驱动程序。

#056      /* Loop the boot modules */

#057      ListHead = &KeLoaderBlock->LoadOrderListHead;

#058      NextEntry = ListHead->Flink;

#059      while (ListHead != NextEntry)

#060      {

#061          /* Get the entry */

#062          LdrEntry = CONTAINING_RECORD(NextEntry,

#063                                       LDR_DATA_TABLE_ENTRY,

#064                                       InLoadOrderLinks);

#065 

#066          /*

#067           * HACK: Make sure we're loading a driver

#068           * (we should be using BootDriverListHead!)

#069           */

#070          if (wcsstr(_wcsupr(LdrEntry->BaseDllName.Buffer), L".SYS"))

#071          {

#072              /* Make sure we didn't load this driver already */

#073              if (!(LdrEntry->Flags & LDRP_ENTRY_INSERTED))

#074              {

 

循环地加载已经在内存里驱动程序，并且启动这些设备。

#075                  DPRINT("Initializing bootdriver %wZ/n", &LdrEntry->BaseDllName);

#076                  /* Initialize it */

#077                  IopInitializeBuiltinDriver(LdrEntry);

#078              }

#079          }

#080 

#081          /* Go to the next driver */

#082          NextEntry = NextEntry->Flink;

#083      }

#084 

#085      /* In old ROS, the loader list became empty after this point. Simulate. */

#086      InitializeListHead(&KeLoaderBlock->LoadOrderListHead);

#087  }