setserial命令:
功能说明: 设置或显示串口的相关信息。
语 法: setserial [-abgGqvVz][设备][串口参数]
补充说明: setserial可用来设置串口或显示目前的设置。
参 数:
-a 显示详细信息。
-b 显示摘要信息。
-g 显示串口的相关信息。
-G 以指令列表的格式来显示信息。
-q 执行时显示较少的信息。
-v 执行时显示较多的信息。
-V 显示版本信息。
-z 设置前,先将所有的标记归零。
rcc-pok-idg-2318:/dev # setserial /dev/ttyS0
/dev/ttyS0, UART: unknown, Port: 0x03f8, IRQ: 4
lsmod命令:
NAME
lsmod - program to show the status of modules in the Linux Kernel
SYNOPSIS
lsmod
DESCRIPTION
lsmod is a trivial program which nicely formats the contents of the
/proc/modules, showing what kernel modules are currently loaded.
Sndconfig 命令可以用来进行声卡配置。
Linux names and files for SCSI:
NAME
sginfo - access mode page information for a SCSI (or ATAPI) device
SYNOPSIS
sginfo [OPTIONS] [DEVICE] [REPLACEMENT_PARAMETERS]
DESCRIPTION
sginfo is a port of the Linux scsiinfo program by Eric Youngdale. It
uses SCSI generic (sg) devices; however in some cases the high level
device name (i.e. sd, sr, st, osst, or hd) can also be used. The pri-
mary role of this program is to access mode page information. If per-
mitted, mode page information can be altered. In addition information
from the INQUIRY and READ DEFECTS commands are also available.
Those interested in SCSI mode pages may find the sdparm utility easier
use, especially for changing parameters. Also the author considers this
utility legacy so the mode pages are not being
rcc-pok-idg-2318:/dev # sginfo /dev/scd0
INQUIRY response (cmd: 0x12)
----------------------------
Device Type 5
Vendor: QEMU
Product: QEMU DVD-ROM
Revision level: 0.9.
查看usb信息:
cat /proc/bus/usb/devices
lsusb命令:
NAME
lsusb - list USB devices
SYNOPSIS
lsusb [ options ]
DESCRIPTION
lsusb is a utility for displaying information about USB buses in the
system and the devices connected to them.
查看usb的详细信息:
rcc-pok-idg-2318:/proc/bus/usb # lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
rcc-pok-idg-2318:/proc/bus/usb # lsusb -vd 1d6b:0001
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27.19-5-default uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:01.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
rcc-pok-idg-2318:~ # sg_map
/dev/sg0 /dev/scd0
sg_map - displays mapping between linux sg and other SCSI devices