Epicor Part BOM Revision Compare

Revision Compare

Use this program to compare revision information  between two different part records. You can compare records in any combination: 

A quote with a job or part 

A job with a part or quote 

A part with a job or quote 

A record with the same type of record 

Menu Path

Navigate to this program from the Main Menu:

 

Production Management > Job Management > General Operations > Revision Compare 

Revision Compare - Parameters

Use this sheet to specify the two records whose part revisions you wish to compare. 

Revision Compare - Material

Use this sheet to review the comparison of the material information for the From and To part revisions. 

Revision Compare - Routing

Use this sheet to review the comparison of the routing information for the From and To part revisions that were entered on the Parameters sheet. 

Parent topic: Engineering Operation Programs

Parent topic: Job Management Operation Programs

Revision Compare - Parameters
Navigate to this sheet/program:
Revision Compare > Parameters
Use this sheet to specify the two records whose part revisions you wish to compare. 
 Tip: For easiest comparison, assign the older, or chronologically original record, to the From Parameters area. Assign the new, updated, or proposed record to the To Parameters area. That way, the original record is considered the basis for the ADD, CHG, and DEL notes that display on the Material and Routing sheets.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/7194627/viewspace-1262511/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/7194627/viewspace-1262511/