Following suggestions below can make concrete mixer work better for us

1. Check if the mixing machine lubrication is smooth, grease and the electric supply pump is operating properly Mini concrete mixer, if it didn’t, we need to add and repair.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:ready-mixed Concrete Batching Plants, concrete batch mix plant,mini concrete batching plant,etc. We will provide you with the best product and service.

2.check of concrete mixing station electrical lines to see if the grounding, insulation, each retainer and limit switch is normal, and then each line and safety monitoring equipment is operating properly.

3. Cleaning up the residue in the box in time and debris in the poor, keeping this machine are clean after work.

4. Check the screw conveyor is operating properly, any abnormal sound, there is no deviation belt. And if the stirring arm is loose, we need to the gap liner and blades, keeping the liner in time planetary concrete mixer, well, and the adjustment for liner and blade clearance is about 5mm

5. for air compressor, we need to see if it needed to clean the water and debris in the air compressor to see if it works normally skip type concrete mixing plant, then the pressure will be ok between 0.5 and 0.8 MPa.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30200755/viewspace-1648167/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/30200755/viewspace-1648167/