LUM series vertical roller mill machine feed requirements

REVIEW: LUM series of ultra-fine vertical milling machine feed will affect a large extent on the capacity of the device, so pay attention to the material must meet the requirements, then the device for feeding, what kind of requirements?

LUM series of ultra-fine vertical milling machine is a vertical mill, is improved on the basis of common devices on vertical mill, compared to conventional devices, the vertical mill has a very advanced production technology, is set ultrafine grinding, grading, transportation in one of the new ultra-fine powder production equipment, these advantages in the production line of high performance concrete grinding efficiency, relatively low cost of production inputs, production of finished good quality, the overall production projects have very good production efficiency, these advantages make the ultrafine vertical milling machine has a wide range of applications, but no matter what kind of business use of the machine must ensure that qualified into the material, which has a great influence on the production process , following on to explain LUM series lum ultrafine vertical roller mill feed demand is like.

LUM series of ultra-fine vertical roller mill machine is a transformation from the traditional vertical mill equipment, inherited the tradition of feeding equipment for demanding characteristics, which mainly refers to the series of devices can produce material particle size can not be greater than 10 mm, and the material hardness is less than 5, the password is less than 3.2, the compressive strength of the material at 150Mpa or less, in addition to the mine must be non-flammable and non-corrosive materials, to achieve this demand, in addition to good choice of materials, it also need to be equipped in the production process corresponding crushing equipment, first crushing machine will chunks of material crushed to smaller particles, and then to put lUM legislation were grinding mill operations.

Also LUM series of ultra-fine vertical milling machine with three different models: LUM1125, LUM1232 and LUM1436, three different types of equipment for feed demand is not the same, for example, they require granular material into the mill are 10 mm or less, and the moisture content of not more than 3%, but these three vertical mill equipment production is not the same, while the yield and the fineness of a great relationship, that is not the same product fineness of these different determines the feed rate of the different feeding speed, large output of LUM vertical milling machine requires a relatively large number, the feed rate of the different you need to use different types of feeding equipment and transportation equipment.

From the above, the following conclusions can be drawn: LUM series of ultra-fine vertical milling machine for feed materials is mainly required particle size less than 10 mm, hardness of less than 5 and less than 3.2 password, compressive strength 150Mpa non-flammable ore and non-corrosive material, and then feed rate due to the different requirements of different types of production is not the same, so in addition to pay attention to the material selection but also pay attention to different types of legislation other than the different needs of the mill's equipment.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30047666/viewspace-1380743/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/30047666/viewspace-1380743/