how to use jaw crusher

The structure of jaw crusher: main frame, eccentric shaft, a large belt pulley, fly wheel, swing jaw, side guard plate, toggle plate, Rear bracket, adjust gap screw, reset spring, and fixed jaw and swing jaw board etc., and the toggle plate also plays a role of protection.

The motor transmits power through belt and belt pulley, drives the swing jaw surround the eccentric shaft do periodic motion. The angle between toggle plate and swing jaw increases when swing jaw moves up., which makes the moving jaw get closes to the fixed jaw.

At the same time the material is squeezed, rubbing, grinding and other multiple broken. The angle of Jaw Crusher between toggle plate and swing jaw decreases when swing jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

Jaw Crusher is the most universal international Crusher with the advantages of Great crushing ratio, even granularity, simple structure, convenient maintenance, widely used in mining, metall-urgical industry, building material, highway, railway, and chemical industry; and it is mainly used to primarily crush many kinds of mining stones, and the largest compression resistance of the material to be crushed is 320MPa.

http://dwcrusher.com/products/stone-crushers/jaw-crusher.html

http://www.dwcrusher.com/

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/27663704/viewspace-741799/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/27663704/viewspace-741799/