evplay 翻录_翻录DVD并将其转换为ISO映像

evplay 翻录

If you own a lot of DVD’s, you might want to convert them to an ISO image for backup and easily playing them on your media center. Today we take a look at ripping your discs using DVDFab, then using ImgBurn to create an ISO image of the ripped DVD files.

如果您拥有许多DVD，则可能需要将它们转换为ISO映像以进行备份，并轻松地在媒体中心上播放它们。 今天我们来看一下使用DVDFab翻录您的光盘，然后使用ImgBurn创建翻录的DVD文件的ISO映像。

Rip DVD with DVDFab6

用DVDFab6翻录DVD

DVDFab will remove copy protection and rip the DVD files for free. Other components in the suite require you to purchase a license after the 30 day trial, but you’ll still be able to rip DVD’s after the trial.

DVDFab将删除复制保护并免费翻录DVD文件。 套件中的其他组件要求您在30天的试用期后购买许可证，但试用后仍可以翻录DVD。

Install DVDFab by accepting the defaults (link below)…a system restart is required to complete the install process.

通过接受默认设置(下面的链接)来安装DVDFab。需要重新启动系统才能完成安装过程。

The first time you run it, a welcome screen is displayed. If you don’t want to see it again check the box Do not show again, then Start DVDFab.

首次运行时，将显示一个欢迎屏幕。 如果您不想再次看到它，请选中“不再显示 ”框，然后启动DVDFab。

Pop the DVD in your drive and click Next.

将DVD弹出驱动器，然后单击“下一步”。

Now select your region and check Do not show again, then OK.

现在选择您的地区并选中不再次显示 ，然后单击确定。

It will then open the DVD and begin to scan it.

然后它将打开DVD并开始对其进行扫描。

Under DVD to DVD you can select either Full Disc or Main Movie depending on what you want to rip. If you want to burn the DVD to a disc after it’s created select the Full Disc option.

在DVD到DVD下，您可以根据想要翻录的内容选择全碟或主电影。 如果要在创建DVD后将其刻录到光盘上，请选择“全盘”选项。

Now click the Start button to begin the ripping process.

现在，单击开始按钮以开始翻录过程。

After the ripping process has completed, you’ll get a message telling you it’s waiting for you to put in a blank DVD. Since we aren’t burning the disc, just cancel the message.

翻录过程完成后，您会收到一条消息，告知您正在等待您放入空白DVD。 由于我们不刻录光盘，因此只需取消该消息即可。

Click Finish and close out of DVDFab or just minimize it if you’re going to keep using it to rip another DVD.

单击完成并关闭DVDFab，或者如果您要继续使用它来翻录另一张DVD，则将其最小化。

By default the temporary directory is in My Documents \ DVDFab \ Temp…however you can change it in settings.

默认情况下，临时目录位于“我的文档” \“ DVDFab \\ Temp”中，但是您可以在设置中更改它。

If you go to the Temp directory you’ll see the DVD files listed there…

如果您转到Temp目录，您将在其中看到DVD文件…

Convert Files to ISO with ImgBurn

使用ImgBurn将文件转换为ISO

Now that we have the files ripped from the DVD, we need to convert them to an ISO image using ImgBurn (link below). Open it up and from the main menu click on Create image file from files/folders.

现在，我们已经从DVD中提取了文件，我们需要使用ImgBurn (下面的链接)将其转换为ISO映像。 打开它，然后从主菜单中单击“ 从文件/文件夹创建图像文件” 。

Click on the folder icon to browse to the location of the ripped DVD files.

单击文件夹图标以浏览到翻录的DVD文件的位置。

Browse to the DVDFab temp directory and the VIDEO_TS folder for the source and click Ok.

浏览到DVDFab临时目录和源的VIDEO_TS文件夹，然后单击“确定”。

Then choose a destination directory, give the ISO a name, and click Save. In this case we ripped the Unbreakable DVD, so named it that.

然后选择目标目录，为ISO命名，然后单击“保存”。 在这种情况下，我们撕开了牢不可破的DVD，因此命名为。

So now in ImgBurn you have the source being the ripped DVD files, and the destination for the ISO…then click the Build button.

因此，现在在ImgBurn中，您的源是翻录的DVD文件，而ISO的目标是……然后单击“生成”按钮。

If you don’t create a volume label, ImgBurn is kind enough to create on for you.

如果您不创建卷标，则ImgBurn足以为您创建。

If everything looks correct, click Ok.

如果一切看起来正确，请单击“确定”。

Now wait while ImgBurn goes through the process of converting the ripped DVD files to an ISO image.

现在，等待ImgBurn完成将翻录的DVD文件转换为ISO映像的过程。

The process has successfully completed.

该过程已成功完成。

The ISO image of the DVD will be in the output directory you selected earlier. Now you can burn the ISO image to a blank DVD or store it on an external hard drive for safe keeping.

DVD的ISO映像将位于您先前选择的输出目录中。 现在，您可以将ISO映像刻录到空白DVD或将其存储在外部硬盘驱动器上以安全保存。

When you’re done, you’ll probably want to go into the temp DVDFab folder and delete the VOB and other files in the Video_TS folder as they will take up a lot of space on your hard drive.

完成后，您可能需要进入temp DVDFab文件夹并删除VOB和Video_TS文件夹中的其他文件，因为它们将占用硬盘驱动器上的大量空间。

Conclusion

结论

Although this method requires two programs to make an ISO out of a DVD, it’s extremely quick. When burning DVD’s of various lengths, it took less than 30 minutes to get the final ISO. Now, you’ll have your DVD movies backed up in case something were to happen to the discs and are no longer playable. If you use Windows Media Center to watch your movies, check out our article on how to automatically mount and view ISO files in Windows 7 Media Center.

尽管此方法需要两个程序才能从DVD中制作ISO，但是它非常快。 刻录各种长度的DVD时，不到30分钟即可获得最终的ISO。 现在，您将备份DVD电影，以防光盘上发生故障而无法播放。 如果您使用Windows Media Center观看电影，请查看有关如何在Windows 7 Media Center中自动挂载和查看ISO文件的文章。

With DVDFab, you get a 30 day fully functional trial for all of its features. You’ll still be able rip DVD’s even after the 30 day trial has ended. The more we’ve been using DVDFab, the more impressed we are with its capabilities, so after the 30 day trial you should consider purchasing a license. We will have a full review of the of it to share with you soon.

使用DVDFab，您可以获得其所有功能的30天全功能试用。 30天的试用期结束后，您仍然可以翻录DVD。 我们使用DVDFab的次数越多，我们对其功能的印象就越深，因此在30天的试用期后，您应该考虑购买许可证。 我们将对其进行全面审查，以便与您分享。

Download DVDFab

下载DVDFab

Download ImgBurn from Ninite

从Ninite下载ImgBurn

翻译自: https://www.howtogeek.com/howto/13558/rip-and-convert-dvds-to-an-iso-image/

evplay 翻录