ios富文本光标大_在iOS中移动文本光标的更简便方法：使用3D触摸

ios富文本光标大

Most people probably already know how to move the cursor on their iPhone or iPad. It’s essential if you make a typo and want to go back to correct your mistake before you send a text or e-mail, but there is an easier way.

大多数人可能已经知道如何在iPhone或iPad上移动光标。 如果您要打错字并想在发送文本或电子邮件之前回过头来纠正错误，这很重要，但是有一种更简单的方法。

Traditionally, on any iPhone preceding the 6S, the only way to move your cursor’s insertion point is to use the magnifying glass. This is accomplished by touching your finger to the screen and holding it there until the magnifying glass appears. Then you just move the magnifying glass until your cursor is at the spot where you want to fix your mistake.

传统上，在6S之前的任何iPhone上，移动光标插入点的唯一方法是使用放大镜。 这是通过将手指触摸屏幕并按住直到出现放大镜来完成的。 然后，您只需移动放大镜，直到光标位于您要纠正错误的位置。

This method isn’t bad, necessarily, but it can be a little awkward and inexact.

此方法不一定不错，但可能有点尴尬和不精确。

If you have an iPhone 6S or later with 3D Touch, then you’re in luck, because there’s a much better way. Instead of touching the screen until the magnifying glass appears, you can instead deep press on the keyboard until the keys blank out and then it basically works like a touchpad. You just keep pressing and then slide your finger to the desired insertion point.

如果您拥有配备3D Touch的iPhone 6S或更高版本，那么您会很幸运，因为还有更好的方法。 您无需触摸屏幕直到出现放大镜，而是可以深度按压键盘，直到按键全部消失，然后基本上像触摸板一样工作。 您只需按住，然后将手指滑到所需的插入点即可。

The difference between the two may be only a second or two at best, but the 3D Touch feels much more natural and exact. Best of all, you don’t have to take your fingers off the keyboard, so corrections can be completed in a more fluid, uninterrupted style.

两者之间的差异充其量也许只有一两秒钟，但是3D Touch感觉更加自然和精确。 最重要的是，您不必将手指从键盘上移开，因此可以更流畅，更流畅地完成校正。

翻译自: https://www.howtogeek.com/279668/an-easier-way-to-move-the-text-cursor-in-ios-use-3d-touch/

ios富文本光标大