如何自动布防和撤防SmartThings

If you’re tired of having to open up the SmartThings app to arm and disarm your setup every time you leave or come home, here’s how to do it all automatically without even touching your phone.

如果您厌倦了每次离开或回家时都必须打开SmartThings应用来布防和撤防设置的方法，以下是自动完成所有操作而无需触摸手机的方法。

While SmartThings makes it easy to control all of your smarthome products and automate certain tasks, the platform also makes for a great DIY home security setup using the various SmartThings-branded sensors. You can receive notifications whenever a door or window opens, as well as add sirens and cameras to your setup for the ultimate home security configuration.

尽管SmartThings可以轻松控制所有智能家居产品并自动化某些任务，但该平台还可以使用各种SmartThings品牌的传感器进行出色的DIY家庭安全设置。 每当门或窗户打开时，您都可以收到通知，并为您的终极家庭安全配置在您的设置中添加警报器和摄像机。

However, the system only works if you arm it from the SmartThings app, and there are three states that you can set it to:

但是，仅当您从SmartThings应用程序武装该系统时，该系统才能工作，并且可以将其设置为三种状态：

• Arm (Away): Used when you’re away from home and no one else is there.

  手臂(外出)：在您出门在外且没有其他人时使用。

• Arm (Stay): Used when you’re at home, but still want the security in place, like when you’re sleeping at night (you can have just certain sensors activated).

  Arm(Stay)：在家里时使用，但仍需要安全保护，例如晚上睡觉时(可以只激活某些传感器)。

• Disarm: Used when you’re at home and don’t need notifications whenever a door opens or motion is detected.

  撤防：在您在家时使用，当门打开或检测到运动时不需要通知。

You can change between these states manually, or you can do it all automatically, and there are a couple of ways to go about it.

您可以手动在这些状态之间进行更改，也可以自动进行所有操作，并且有几种方法可以解决。

使用您的位置布防 (Arm and Disarm Using Your Location)

Perhaps one of the best ways to automatically arm and disarm your SmartThings setup is by using geofencing. Simply put, your SmartThings hub has an invisible, virtual fence surrounding it, and whenever you cross that fence, your SmartThings sensors and devices can automatically change states.

自动布防和撤防SmartThings设置的最佳方法之一就是使用地理围栏 。 简而言之，您的SmartThings集线器周围有一个看不见的虚拟围栏，每当您越过该围栏时，您的SmartThings传感器和设备都可以自动更改状态。

So for example, when you leave your house and exit out of that virtual barrier, you can have your SmartThings setup automatically arm itself, and then when you get home and enter back into the virtual fence, it can automatically disarm your system.

因此，例如，当您离开家门并退出虚拟屏障时，您可以让SmartThings安装程序自动进行布防，然后当您回到家中并进入虚拟围栏时，它可以自动解除系统布防。

To set this up, start by opening the SmartThings app on your phone and click the sidebar menu button in the top-right corner of the screen.

要进行此设置，请先在手机上打开SmartThings应用，然后单击屏幕右上角的侧边栏菜单按钮。

Tap on the settings gear icon in the top-right corner.

点击右上角的设置齿轮图标。

Scroll down a bit and tap anywhere on the map.

向下滚动并点按地图上的任意位置。

Tap and hold on the black dot, and then drag it to change the radius of the virtual fence. You can make it as big as you want, but the minimum radius is 500 feet. Once you decide on a radius, tap “Save” in the top-right corner.

点击并按住黑点，然后将其拖动以更改虚拟围栏的半径。 您可以将其设置为任意大小，但最小半径为500英尺。 确定半径后，点击右上角的“保存”。

Tap “Done” in the top-right corner.

点击右上角的“完成”。

With your geofence set, you’ll want to make sure that the app has permission to use your location. To do this on iOS, open up the Settings app and navigate to Privacy > Location Services > SmartThings and select “Always”. On Android, location is automatically enabled.

设置好地理围栏后，您需要确保该应用有权使用您的位置。 要在iOS上执行此操作，请打开“设置”应用，然后导航至“隐私”>“位置服务”>“ SmartThings”，然后选择“始终”。 在Android上，会自动启用位置信息。

Now, to set up the automation, you’ll need to set up a “Routine”. We have a guide to show you how routines work, but here’s how to set up a simple routine for automating the arm/disarm feature.

现在，要设置自动化，您需要设置一个“例程”。 我们有一个指南向您展示例程的工作原理 ，但是这里是如何设置一个简单的例程来自动布防/撤防功能。

Start off by tapping on the “Routines” tab at the bottom of the screen.

通过点击屏幕底部的“常规”标签开始。

Tap on the “+” icon in the top-right corner.

点击右上角的“ +”图标。

Tap on where it says “What do you want to do” and give the routine a name. Tap on “Next” when you’re done.

点击显示“您想做什么”的位置，然后为例程命名。 完成后，点击“下一步”。

Select “Set Smart Home Monitor to”.

选择“将智能家居显示器设置为”。

Select one of three options. In this case, we’re going to select “Arm (Away)”. Hit “Done”.

选择三个选项之一。 在这种情况下，我们将选择“ Arm(Away)”。 点击“完成”。

Scroll all the way done and tap on “Automatically perform [routine name]”.

一直滚动到最后，然后点击“自动执行[例程名称]”。

Tap on “Everyone leaves”.

点击“所有人离开”。

Tap “Which?”

点击“哪个？”

Select your phone or all of the phones in the list (if you have multiple users). Hit “Done”.

选择您的电话或列表中的所有电话(如果您有多个用户)。 点击“完成”。

Next, you can set a delay time. The default is 10 minutes, but you can leave it blank to make it instant.

接下来，您可以设置延迟时间。 默认值为10分钟，但您可以将其保留为空白以使其立即生效。

When that’s finished, simply tap “Done” in the top-right corner.

完成后，只需点击右上角的“完成”。

Tap “Done” again.

再次点击“完成”。

Your routine will now show up in the list routines.

您的例程现在将显示在列表例程中。

This routine is for when you leave home and arm your system, so you’ll need to create another routine for when you arrive home and automatically disarm SmartThings.

该例程适用于您离开家并布防系统时的情况，因此您需要为到达家时创建另一个例程并自动撤防SmartThings。

按计划布撤防 (Arm and Disarm on a Schedule)

If you’s rather arm and disarm your SmartThings system at certain times of the day, the process is very similar to geofencing. You just don’t have to deal with the location settings.

如果您宁愿在一天中的某些时间为您的SmartThings系统设防，则该过程与地理围栏非常相似。 您只是不必处理位置设置。

You’re still creating a “Routine”, though, so from the main screen in the app, tap on the “Routines” tab at the bottom.

不过，您仍在创建“常规”，因此从应用程序的主屏幕中，点击底部的“常规”标签。

Tap on the “+” icon in the top-right corner.

点击右上角的“ +”图标。

Tap on where it says “What do you want to do” and give the routine a name. Tap on “Next” when you’re done.

点击显示“您想做什么”的位置，然后为例程命名。 完成后，点击“下一步”。

Select “Set Smart Home Monitor to”.

选择“将智能家居显示器设置为”。

Select one of three options. In this case, we’re going to select “Arm (Away)”. Hit “Done”.

选择三个选项之一。 在这种情况下，我们将选择“ Arm(Away)”。 点击“完成”。

Scroll all the way down and tap on “Automatically perform [routine name]”.

一直向下滚动并点击“自动执行[例程名称]”。

Tap on “At a specific time”.

点击“在特定时间”。

Tap on “Time of day”.

点击“一天中的时间”。

Next, set a time that you want to automatically arm your SmartThings system, so if you leave for work a little before 8am, you could set it for 8am.

接下来，设置您想要自动布防SmartThings系统的时间，这样，如果您在早上8点之前去上班，则可以将其设置为早上8点。

You can also tap on “Only on certain days of the week” and select specific days when you want your system arm at 8am.

您还可以点击“仅在一周中的某些日子”，然后选择希望在上午8点布防系统的特定日子。

Simply place checks next to each day and hit “Done” in the top-right corner.

只需每天将支票放在旁边，然后点击右上角的“完成”。

When that’s finished, simply tap “Done” in the top-right corner.

完成后，只需点击右上角的“完成”。

Tap “Done” again.

再次点击“完成”。

Your routine will now show up in the list of routines.

现在，您的例程将显示在例程列表中。

Again, you’ll need to create a new routine for every status change, so if you want to disarm your system automatically later in the day, you’ll need to create another routine that does this.

同样，您将需要为每个状态更改创建一个新例程，因此，如果要在当天晚些时候自动撤防系统，则需要创建另一个例程来执行此操作。

翻译自: https://www.howtogeek.com/256392/how-to-arm-and-disarm-smartthings-automatically/