网件4300
By default, Netgear Arlo cameras are named by their serial numbers, which can cause confusion once you add multiple cameras to your setup. Here’s how to rename them in the Arlo app to make it easier to identify which camera is which.
默认情况下,Netgear Arlo摄像机以其序列号命名,一旦将多台摄像机添加到设置中,这可能会引起混乱。 这是在Arlo应用程序中重命名它们的方法,以使其更容易识别哪个摄像机。
Open up the Arlo app and tap on the “Settings” tab at the bottom.
打开Arlo应用程序,然后点击底部的“设置”标签。
Select “My Devices” at the top.
选择顶部的“我的设备”。
Your cameras will be listed here and will likely have their serial numbers as the names. Go ahead and select a camera. In my case, there’s only one camera.
您的相机将在此处列出,并且可能会使用其序列号作为名称。 继续并选择一个摄像机。 就我而言,只有一台相机。
Scroll down and tap on “Position Mode”. This will give you a quick live view of the camera so that you can look to see which camera it is.
向下滚动并点击“位置模式”。 这将为您提供摄像机的实时实时视图,以便您可以看到它是哪台摄像机。
Hit the back arrow in the top-left corner.
点击左上角的后退箭头。
Scroll back up and tap on “Name”.
向上滚动并点击“名称”。
Tap on the serial number and type on a new name for your camera. Something like “Front Door”, “Garage”, or “Back Porch” would be ideal, depending on where the camera is set up.
点击序列号,然后为相机键入一个新名称。 像“前门”,“车库”或“后廊”之类的东西会很理想,这取决于相机的安装位置。
Once that’s done, hit “Save” in the top-right corner.
完成后,点击右上角的“保存”。
At that point, you’re good to go. Repeat this process for each camera if you have more than one.
到那时,您已经准备好了。 如果您有多个摄像机,请对每个摄像机重复此过程。
翻译自: https://www.howtogeek.com/308030/how-to-rename-a-netgear-arlo-camera/
网件4300