word中部分居中部分靠右_如何在Word中选择全部或部分表

word中部分居中部分靠右

Just like selecting text and images in Word is a very common task in Word, so is selecting content in a table. There may be times you want to select a single cell, an entire row or column, multiple rows or columns, or an entire table.

就像在Word中选择文本和图像是Word中非常常见的任务一样，在表中选择内容也是如此。 有时您可能想要选择单个单元格，整行或整列，多行或整列或整张表。

选择单个单元格 (Selecting an Individual Cell)

To select an individual cell, move the mouse to the right side of the cell until you see it turn into a black arrow that points up and to the right. Click in the cell at that point to select it.

要选择单个单元格，请将鼠标移到该单元格的右侧，直到您看到它变成一个向上和向右指向的黑色箭头。 单击该点处的单元格以将其选中。

To use the keyboard to select a cell, put the cursor anywhere in the cell. Press “Shift” and then press the right arrow key until the whole cell is selected including the end-of-cell marker to the right of the content in the cell as shown in the following image.

要使用键盘选择单元格，请将光标放在单元格中的任何位置。 按“ Shift”，然后按向右箭头键，直到选中整个单元格，包括单元格内容右侧的单元格结束标记，如下图所示。

选择行或列 (Selecting a Row or Column)

To select a row in a table, move the cursor to the left of the row until it turns into a white arrow pointing up and to the right, as shown in the following image. To select multiple rows this way, drag the mouse down over the other rows once you’ve selected one row.

要选择表中的一行，请将光标移到该行的左侧，直到它变成变成一个向上和向右的白色箭头，如下图所示。 要以这种方式选择多行，请在选择一行后将鼠标向下拖动到其他行上。

NOTE: The plus icon that displays is used to insert a row at that location in the table so do not click that icon to select the row.

注意：显示的加号图标用于在表格中的该位置插入一行，因此请勿单击该图标来选择该行。

You can also use the mouse to select multiple, non-contiguous rows, or rows that are not connected. To do this, select one row using the mouse, press “Ctrl”, and then click on each row you want to add to the selection.

您也可以使用鼠标选择多个不连续的行或未连接的行。 为此，请使用鼠标选择一行，按“ Ctrl”，然后单击要添加到选择中的每一行。

NOTE: This is similar to selecting multiple, non-contiguous files in or File Explorer (Windows 8 and 10) or Windows Explorer (Windows 7).

注意：这类似于在或文件资源管理器(Windows 8和10)或Windows资源管理器(Windows 7)中选择多个非连续文件。

To select a row using the keyboard, select the first cell in the row using the keyboard as described above and then press the “Shift” key. While the “Shift” key is pressed, keep pressing the right arrow key to select each cell in the row until you’ve selected all the cells in the row and the end-of-row marker as shown in the following image.

要使用键盘选择一行，请如上所述使用键盘选择该行的第一个单元格，然后按“ Shift”键。 在按下“ Shift”键的同时，按住向右箭头键选择行中的每个单元格，直到您选择了行中的所有单元格和行尾标记，如下图所示。

To select multiple rows using the keyboard, keep the “Shift” pressed and press the down arrow key once for each subsequent row you want to select.

要使用键盘选择多行，请按住“ Shift”，然后为要选择的每一行按一次向下箭头键。

NOTE: When using the keyboard to select rows, you cannot select non-contiguous rows.

注意：使用键盘选择行时，不能选择不连续的行。

To select a column, move the mouse over the column until you see a black down arrow and then click to select that column.

要选择一列，请将鼠标移到该列上，直到看到黑色的向下箭头，然后单击以选择该列。

To select multiple columns, hold the mouse down when you click in the first column to be selected using the black arrow cursor and drag over the other columns to select them.

要选择多个列，请在使用黑色箭头光标单击要选择的第一列时按住鼠标，然后在其他列上拖动以选择它们。

To select non-contiguous columns, select one column using the mouse, press “Ctrl”, and then click on the other columns using the black arrow cursor.

要选择不连续的列，请使用鼠标选择一个列，按“ Ctrl”，然后使用黑色箭头光标单击其他列。

To use the keyboard to select a column, select the first cell in the column using the keyboard as described above and then press the “Shift” key. While the “Shift” key is pressed, keep pressing the down arrow key to select each cell in the column until you’ve selected all the cells in the column, as shown in the following image.

要使用键盘选择列，请使用如上所述的键盘在列中选择第一个单元格，然后按“ Shift”键。 在按下“ Shift”键的同时，按住向下箭头键选择列中的每个单元格，直到您选择了列中的所有单元格，如下图所示。

Selecting multiple columns using the keyboard is done in a similar way to selecting multiple rows. Once you select one column, keep the “Shift” key pressed while you press the right or left arrow key for each subsequent column you want to select. You cannot select non-contiguous columns using the keyboard.

使用键盘选择多列的方式与选择多行相似。 选择一列后，按住“ Shift”键，同时为要选择的每个后续列按向右或向左箭头键。 您不能使用键盘选择不连续的列。

选择整个表 (Selecting an Entire Table)

To select an entire table, move your mouse over the table until you see the table selection icon in the upper-left corner of the table.

要选择整个表格，请将鼠标移到表格上方，直到在表格的左上角看到表格选择图标。

Click the table selection icon to select the entire table.

单击表格选择图标以选择整个表格。

使用功能区选择全部或部分表格 (Using the Ribbon to Select All or Part of a Table)

You can also use the ribbon to select any part of a table or an entire table. Put the cursor in any cell in the table and click the “Layout” tab under “Table Tools”.

您还可以使用功能区选择表的任何部分或整个表。 将光标放在表格中的任何单元格中，然后单击“表格工具”下的“布局”选项卡。

In the “Table” section, click “Select” and select an option from drop-down menu, depending on what part of the table you want to select.

在“表格”部分，单击“选择”，然后从下拉菜单中选择一个选项，具体取决于您要选择表格的哪一部分。

NOTE: The “Select” button on the “Layout” tab will only select the one cell, row, or column where the cursor is currently located.

注意：“布局”选项卡上的“选择”按钮将仅选择光标当前所在的一个单元格，行或列。

The entire table can also be selected by holding down the “Alt” key and double-clicking on the table. Note that this also opens the “Research” pane and searches for the word on which you double-clicked.

也可以通过按住“ Alt”键并双击表来选择整个表。 请注意，这还将打开“研究”窗格并搜索您双击的单词。

翻译自: https://www.howtogeek.com/221131/how-to-select-all-or-part-of-a-table-in-word/

word中部分居中部分靠右