alexa_当您的Alexa计时器关闭时如何闪烁色相灯

alexa

Alexa’s hands-free timers are one of the best reasons to own an Echo (or an Amazon Tap), but it would be nice if those timers gave you a visual indicator as well. Here’s how to set your Philips Hue lights to blink when your timer goes off.

Alexa的免提计时器是拥有Echo(或Amazon Tap )的最佳理由之一，但是如果这些计时器也为您提供视觉指示器，那就太好了。 这是将计时器关闭时将Philips Hue指示灯设置为闪烁的方法。

For this, we’re going to use a service called IFTTT (If This Then That). If you haven’t used IFTTT before, check out our guide to getting started for info on how to create an account and connect apps. Then, come back here to create the necessary recipe.

为此，我们将使用一个称为IFTTT的服务(如果做到了，那么就做到了)。 如果您以前从未使用过IFTTT，请查看我们的入门指南，以获取有关如何创建帐户和连接应用程序的信息。 然后，回到这里创建必要的配方。

To do this, you’ll need to enable the Philips Hue and Amazon Alexa channels in IFTTT. We’ll demonstrate on the Philips Hue lights, but you may be able to create a similar recipe for other smart lights such as Belkin WeMo, or LIFX. For your convenience, we’ve already created an applet using Philips Hue lights here, or you can follow the steps below to make it for yourself.

为此，您需要在IFTTT中启用Philips Hue和Amazon Alexa频道。 我们将在Philips Hue灯上进行演示，但是您可以为其他智能灯(例如Belkin WeMo或LIFX)创建类似的配方。 为了您的方便，我们已经在此处使用Philips Hue灯创建了一个applet ，或者您可以按照以下步骤自行制作。

To get started, head to IFTTT’s home page and log in. Then, click your profile picture.

首先，请访问IFTTT的主页并登录。然后，单击您的个人资料图片。

Next, click “New Applet.”

接下来，单击“新小程序”。

Click the word “this” highlighted in blue.

单击以蓝色突出显示的单词“ this”。

Search for “Amazon Alexa” in the list if you don’t see it already and click it.

如果还没有找到，请在列表中搜索“ Amazon Alexa”，然后单击它。

In the list of triggers, choose “Your Timer goes off.” This will handle countdown timers such as “set a timer for 30 minutes.” You can also use “Your Alarm goes off” for when you want to use an alarm for a specific time like “set an alarm for 8:30PM.”

在触发器列表中，选择“您的计时器关闭”。 这将处理倒数计时器，例如“设置30分钟的计时器”。 当您想在特定时间使用闹钟时，也可以使用“您的闹钟关闭”，例如“将闹钟设置为8:30 PM”。

Next, click the word “that” highlighted in blue.

接下来，单击以蓝色突出显示的单词“ that”。

Find or search for “Philips Hue” (or your preferred smart light, if you’re customize this applet) in the list and click on it.

在列表中查找或搜索“ Philips Hue”(如果您是自定义此小程序，则为首选的智能灯)，然后单击它。

In the list of triggers, search for “Blink lights” and click on it. Note: the LIFX channel also has a blink action, but Wemo Lighting does not. If you’re customizing this applet for WeMo, you may need to substitute a dimmer or fade action instead of a blink.

在触发器列表中，搜索“闪烁灯”，然后单击它。 注意：LIFX通道也有闪烁动作，但是Wemo Lighting没有。 如果要为WeMo自定义此applet，则可能需要用调光或淡入淡出的动作来代替眨眼。

Click the dropdown menu and choose which lights you’d like to blink when your timer goes off. You can also choose to have all your connected lights blink, if you tend to wander between rooms when you use your timers.

点击下拉菜单，然后选择要在计时器关闭时闪烁的指示灯。 如果您在使用计时器时倾向于在房间之间徘徊，也可以选择使所有连接的指示灯闪烁。

Finally, give your applet a name, then scroll down and click Finish.

最后，给小程序命名，然后向下滚动并单击“完成”。

From this point on, your lights should blink whenever your Alexa timer goes off. IFTTT’s response time is usually very fast, so you should see the lights blink at roughly the same time the timer goes off. However, keep in mind that with a third-party service and multiple devices like this, there’s always a slight chance that the Hue lights may not respond immediately. If you’re using a timer to keep track of something important, like food in the oven, you may still want to keep an eye on Alexa or the clock regardless.

从这时起，只要您的Alexa计时器关闭，您的灯光应闪烁。 IFTTT的响应时间通常非常快，因此您应该大致在定时器关闭的同时看到指示灯闪烁。 但是，请记住，通过第三方服务和类似的多种设备，色相指示灯始终很少会立即响应。 如果您使用计时器跟踪重要信息，例如烤箱中的食物，则无论如何，您可能仍要关注Alexa或时钟。

翻译自: https://www.howtogeek.com/299105/how-to-blink-your-hue-lights-when-your-alexa-timer-goes-off/

alexa